The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
Since LA57 was moved to the main SDM document with revision 072, it
seems that we should have a support for it, and silicons are coming.
This patch makes pmap support both LA48 and LA57 hardware. The
selection of page table level is done at startup, kernel always
receives control from loader with 4-level paging. It is not clear how
UEFI spec would adapt LA57, for instance it could hand out control in
LA57 mode sometimes.
To switch from LA48 to LA57 requires turning off long mode, requesting
LA57 in CR4, then re-entering long mode. This is somewhat delicate
and done in pmap_bootstrap_la57(). AP startup in LA57 mode is much
easier, we only need to toggle a bit in CR4 and load right value in CR3.
I decided to not change kernel map for now. Single PML5 entry is
created that points to the existing kernel_pml4 (KML4Phys) page, and a
pml5 entry to create our recursive mapping for vtopte()/vtopde().
This decision is motivated by the fact that we cannot overcommit for
KVA, so large space there is unusable until machines start providing
wider physical memory addressing. Another reason is that I do not
want to break our fragile autotuning, so the KVA expansion is not
included into this first step. Nice side effect is that minidumps are
compatible.
On the other hand, (very) large address space is definitely
immediately useful for some userspace applications.
For userspace, numbering of pte entries (or page table pages) is
always done for 5-level structures even if we operate in 4-level mode.
The pmap_is_la57() function is added to report the mode of the
specified pmap, this is done not to allow simultaneous 4-/5-levels
(which is not allowed by hw), but to accomodate for EPT which has
separate level control and in principle might not allow 5-leve EPT
despite x86 paging supports it. Anyway, it does not seems critical to
have 5-level EPT support now.
Tested by: pho (LA48 hardware)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
arg0 should be an offset of the return point within the function, arg1
should be the return value. Previously the return probe had arguments as
if for the entry probe.
Tested on armv7.
andrew noted that the same problem seems to be present on arm64, mips,
and riscv.
I am not sure if I will get around to fixing those. So, platform users
or anyone looking to make a contribution please be aware of this
opportunity.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25685
When emulating a load pair or store pair in dtrace on arm64 we need to
copy the data between the stack and trap frame. When the registers are
either the link register or the zero register we will access memory
past the end of the trap frame as these are encoded as registers 30 and
31 respectively while the array they access only has 30 entries.
Fix this by creating 2 helper functions to perform the operation with
special cases for these registers.
Sponsored by: Innovate UK
If DTRACE is enabled at compile time, all kernel breakpoint traps are
first given to dtrace to see if they are triggered by a FBT probe.
Previously if dtrace didn't recognize the trap, it was silently
ignored breaking the handling of other kernel breakpoint traps such as
the debug.kdb.enter sysctl. This only returns early from the trap
handler if dtrace recognizes the trap and handles it.
Submitted by: Nicolò Mazzucato <nicomazz97@gmail.com>
Reviewed by: markj
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D24478
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
The registers in ilumos and FreeBSD have a different number.
In the illumos, last 32-bits register defined is SS an in FreeBSD is GS.
While translating register we should comper it to the highest one.
PR: 240358
Reported by: lwhsu@
MFC after: 2 weeks
There is no reason for these routines to be written in assembly. In
the ports of DTrace to other platforms, they are already written in C.
No functional change intended.
MFC after: 1 week
Sponsored by: Netflix
The registers in ilumos and FreeBSD have a different number.
In the illumos, last 32-bits register defined is SS an in FreeBSD is GS.
This off-by-one caused the uregs array to returns the wrong 64-bits register
on amd64.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20363
Fix stack unwinding such that requesting N stack frames in lockstat will
actually give you N frames, not anywhere from 0-3 as had been before.
lockstat prints the mutex function instead of the caller as the reported
locker, but the stack frame is detailed enough to find the real caller.
MFC after: 2 weeks
In all practical situations, the resolver visibility is static.
Requested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: so (emaste)
Differential revision: https://reviews.freebsd.org/D20281
Fix some execution bugs in the dtrace powerpc asm. addme pulls in the carry
flag which we don't want, and the result wasn't recorded anyways, so the
following beq to check for exit condition wasn't checking the right
condition.
Simplify the stack walking in dtrace_isa.c, so there's only a single walker
that handles both pc and sp. This should make it easier to follow, and any
bugfix that may be needed for walking only needs to be made in one place
instead of two now.
MFC after: 2 weeks
It simply doesn't work in general since VCPUs may migrate between
physical cores. The approach used to measure skew also doesn't
make much sense in a VM.
PR: 218452
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
fasttrap hooks the userspace breakpoint handler; the hook looks up the
breakpoint address in a hash table of tracepoints. It is possible for
the tracepoint to be removed by a different thread in between the
breakpoint trap and the hash table lookup, in which case SIGTRAP gets
delivered to the target process. Fix the problem by adding a
per-process generation counter that gets incremented when a tracepoint
belonging to that process is removed. Then, when a lookup fails, the
trapping instruction is restarted if the thread's counter doesn't match
that of the process.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19273
dtrace has its own routines which were not updated after SMAP support got
implemented. Use ifunc just like for other routines.
This in particular fixes ustack().
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18542
There seems to be a race in CI, such that dtrace_asm.S might be assembled
before the genassym is completed. This causes a build failure when PSL_EE
doesn't exist, and is read as 0. Get around this by explicitly specifying
the bits in the mask instead.
unwind_frame() may be instrumented by FBT, leading to recursion into
dtrace_probe(). Manually inline unwind_frame() as we do with stack
unwinding code for other architectures.
Submitted by: Domagoj Stolfa
Reviewed by: manu
MFC after: 1 week
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15359
This helps catch cases where an instrumented function is called while
in probe context.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
MFC after: 2 weeks
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D14863
These have been supplanted by the MI signal information codes in
<sys/signal.h> since 7.0. The FPE_*_TRAP ones were deprecated even
earlier in 1999.
PR: 226579 (exp-run)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14637
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
dtrace_gethrtime() may be called outside of probe context, and in
particular, from the DTRACEIOC_BUFSNAP handler.
Disable interrupts rather than using sched_pin() to help ensure that
we don't call any external functions when in probe context.
PR: 218452
MFC after: 1 week
Turn on the required options in the ERL config file, and ensure
that the fbt module is listed as a dependency for mips in
the modules/dtrace/dtraceall/dtraceall.c file.
PR: 220346
Reviewed by: gnn, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12227
Close a potential race in reading the CPU dtrace flags, where a thread can
start on one CPU, and partway through retrieving the flags be swapped out,
while another thread traps and sets the CPU_DTRACE_NOFAULT. This could
cause the first thread to return without handling the fault.
Discussed with: markj@
The current method only sort of works, and usually doesn't work reliably.
Also, on Book-E the return address from DEBUG exceptions is not the sentinel
addresses, so it won't exit the loop correctly.
Fix this by better handling trap frames during unwinding, and using the
common trap handler for debug traps, as the code in that segment is
identical between the two.
MFC after: 1 week
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
dtrace_trap() consumes page and protection faults triggered by code running
in DTrace probe context. Such faults occur with interrupts disabled and are
detected using a per-CPU flag. Regular faults cause dtrace_trap() to be
called with interrupts enabled, and nothing was ensuring that the flag was
read from the correct CPU. This may result in dtrace_trap() consuming
unrelated page and protection faults when DTrace is enabled, causing the
fault handler to return without actually having handled the fault.
Diagnosed by: Ryan Libby <rlibby@gmail.com>
MFC after: 3 days
Sponsored by: Dell EMC Isilon
When recording probe site addresses in the output DOF file, dtrace -G
needs to emit relocations for the .SUNW_dof section in order to obtain
the addresses of functions containing probe sites. DTrace expects the
addresses to be relative to the base address of the final ELF file,
and the amd64 USDT implementation was relying on some unspecified and
incorrect behaviour in the base system GNU ld to achieve this.
This change reimplements the probe site relocation handling to allow
USDT to be used with lld and newer GNU binutils. Specifically, it
makes use of R_X86_64_PC64/R_386_PC32 relocations to obtain the
probe site address relative to the DOF file address, and adds and uses a
new DOF relocation type which computes the final probe site address using
these relative offsets.
Reported by and discussed with: Rafael Espíndola
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9374
This corresponds to the following illumos issues:
5755 want support for Intel FMA instrs
5756 want support for Intel BMI1 instrs
5757 want support for Intel BMI2 instrs
5758 want support for Intel AVX2 instrs
7204 Want broadwell rdseed and adx support
7208 Want stac/clac disasm support
7733 Need SHA Instruction dis support
7756 dis can't handle x86 SSE 3 instructions
7757 want avx2 disasm tests
7758 want SSE 4.1 disasm tests
MFC after: 2 weeks
This ioctl has been considered legacy by upstream since the DTrace code
was first imported, and is unused. The removal also allows some
simplification of dtrace_helper_slurp().
Also remove a bogus copyout in the DTRACEHIOC_ADDDOF handler. Due to a
bug, it would overwrite an in-memory copy of the DOF header rather than
the passed-in DOF helper. Moreover, DTRACEHIOC_ADDDOF already copies the
helper back out automatically since its argument has the IOC_OUT attribute.
* Use the right incantation to get the next stack pointer. Since powerpc uses
special frames for traps, dereferencing the stack pointer straight up won't
get us the next stack pointer in every case.
* Clear EE using the correct instruction sequence. The PowerISA states that
'andi.' ANDs the register with 0||<imm>, instead of sign extending or filling
out the unavailable bits with 1. Even if it did sign extend, PSL_EE is
0x8000, so ~PSL_EE is 0x7fff, and the upper bits would be cleared. Use rlwinm
in the 32-bit case, and a two-rotate sequence in the 64-bit case, the latter
chosen to follow the output generated by gcc.
MFC after: 1 week
Also reduce the diff between us and upstream: the input data model will
always be DATAMODEL_NATIVE because of a bug (p_model is never set but is
always initialized to 0), so we don't need to override the caller anyway.
This change is also necessary to support the pid provider for 32-bit
processes on amd64.
MFC after: 2 weeks