single threaded installworld, installkernel and distribution (using
NANO_MAKE). Setting NANO_PMAKE to 'make -j 12' would otherwise bomb
during installation of world.
MFC after: 2 weeks
Although <&0 does nothing, it is a redirection affecting standard input and
should therefore disable the </dev/null redirection implicit in a background
command.
This call should be a sufficiently close approximation of what happens
when a filesystem is unmounted and remounted. To be more specific, it
should test that the data that was in the page cache is the same data
that ends up on a stable storage or in a filesystem's internal cache,
if any.
This will catch the cases where a page with modified data is marked as
a clean page for whatever reason.
While there, make logging of the special events (open+close before
plus invalidation now) more generic and slightly better than the previous
hack.
MFC after: 10 days
This option should be useful for testing if a filesystem uses the
unified buffer / page cache.
Or, if filesystem's emulation of the unified cache works as expected.
This should be the case for e.g. ZFS.
MFC after: 1 week
- Fix ALWAYS_INSTALL to take precedence over the FreeBSD ID checks.
In particular, always install a file where the only change was
the FreeBSD ID even if -F is specified.
- Fix the -F option in the case that the only upstream change is a
change in the FreeBSD ID and the local file is removed.
- Add tests for these two cases.
passed to mergemaster. In this mode, only changes to /etc/master.passwd
and /etc/group are merged to /etc. In addition, it uses a temporary
tree to stage these changes rather than overwriting the existing
'current' and 'previous' trees so that a full update can be run after
a normal installworld has completed.
MFC after: 2 weeks
Add all files from /usr/tests to the obsoleted files list when the
build of the tests is disabled via the WITHOUT_TESTS knob. Do this
automatically so that we do not have to suffer the pain of maintaining
such list by hand.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
good. This caused libc to spoof the ports libiconv namespace and
provide a colliding libiconv.so.3 to fool rtld. This should have
been removed some time ago.
This includes the following:
- use separate memory regions for VALE ports
- locking fixes
- some simplifications in the NIC-specific routines
- performance improvements for the VALE switch
- some new features in the pkt-gen test program
- documentation updates
There are small API changes that require programs to be recompiled
(NETMAP_API has been bumped so you will detect old binaries at runtime).
In particular:
- struct netmap_slot now is 16 bytes to support an extra pointer,
which may save one data copy when using VALE ports or VMs;
- the struct netmap_if has two extra fields;
MFC after: 3 days
If job control is not enabled, background jobs started with ... & ignore
SIGINT and SIGQUIT so that they are not affected by such signals that are
intended for the foreground job. However, this should not prevent
reassigning a different action for these signals (as if the shell invocation
inherited these signal actions from its parent).
Austin group issue #751
Example:
{ trap - INT; exec sleep 10; } & wait
A Ctrl+C should terminate the sleep command.
Add atsectl, a simple utility to read and update MAC addresses stored in
the default flash location on Altera DE4 boards. Typically used once
when setting up a board so leaving in tools rather than inflicting on
all users.
To build with world add LOCAL_DIRS=tools/tools/atsectl to the make
command line.
MFC after: 3 days
Sponsored by: DARPA/AFRL
r256095:
- Add gnu/usr.bin/rcs back to the base system.
r256120:
- Add WITHOUT_RCS back to src.conf.5.
r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.
Requested by: many
Approved by: re (marius)
Discussed with: core
Since so many programs don't check return value, always NUL terminate
the buf...
fix rounding when using base 1024 (the bug that started it all)...
add a set of test cases so we can make sure that things don't break
in the future...
Thanks to Clifton Royston for testing and the test program...
Approved by: re (hrs, glebius)
MFC after: 1 week
The libarchive-based replacements have been used since 2009; the GNU
ones were kept to support source upgrades from FreeBSD 6.
Approved by: re@ (delphij)
generates a configuration suitable for running unbound as a caching
forwarding resolver, and configures resolvconf(8) to update unbound's
list of forwarders in addition to /etc/resolv.conf. The initial list
is taken from the existing resolv.conf, which is rewritten to point to
localhost. Alternatively, a list of forwarders can be provided on the
command line.
To assist this script, add an rc.subr command called "enabled" which
does nothing except return 0 if the service is enabled and 1 if it is
not, without going through the usual checks. We should consider doing
the same for "status", which is currently pointless.
Add an rc script for unbound, called local_unbound. If there is no
configuration file, the rc script runs local-unbound-setup to generate
one.
Note that these scripts place the unbound configuration files in
/var/unbound rather than /etc/unbound. This is necessary so that
unbound can reload its configuration while chrooted. We should
probably provide symlinks in /etc.
Approved by: re (blanket)
This connects LLDB to the build, but it is disabled by default. Add
WITH_LLDB= to src.conf to build it.
Note that LLDB requires a C++11 compiler so is disabled on platforms
using GCC.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
The c++filt binary is only installed if ${MK_GCC} == yes && ${MK_CXX} ==
yes. This means that it should be removed if ${MK_GCC} == no ||
${MK_CXX} == no. In its current form, it actually uses a conjunction
instead of a disjunction.
As there is already a separate block for ${MK_CXX} == no listing
c++filt, simply remove the conditional entirely.
Approved by: re (gjb)
it. We should probably fix the code but appeasing clang with this fix for now.
gcc does not have such limit.
Reviewed by: jmg
Approved by: re (hrs), sbruno (mentor, implicit)
private shared libraries, instead of hacked-together archives of PIC
objects. This makes it possible to build a static libkrb5 that works.
Reviewed by: stas
Approved by: re (gjb)
To enable them, set WITH_GCC and WITH_GNUCXX in src.conf.
Make clang default to using libc++ on FreeBSD 10.
Bumped __FreeBSD_version for the change.
GCC is still enabled on PC98, because the PC98 bootloader requires GCC to build
(or, at least, hard-codes the use of gcc into its build).
Thanks to everyone who helped make the ports tree ready for this (and bapt
for coordinating them all). Also to imp for reviewing this and working on the
forward-porting of the changes in our gcc so that we're getting to a much
better place with regard to external toolchains.
Sorry to all of the people who helped who I forgot to mention by name.
Reviewed by: bapt, imp, dim, ...
Austin Group issue #411 requires 'e' to be accepted before and after 'x',
and encourages accepting the characters in any order, except the initial
'r', 'w' or 'a'.
Given that glibc accepts the characters after r/w/a in any order and that
diagnosing this problem may be hard, change our libc to behave that way as
well.
Formerly, return always returned from a function if it was called from a
function, even if there was a closer dot script. This was for compatibility
with the Bourne shell which only allowed returning from functions.
Other modern shells and POSIX return from the function or the dot script,
whichever is closest.
Git 1.8.4's rebase --continue depends on the POSIX behaviour.
Reported by: Christoph Mallon, avg
As promised, drop the option to make the older GNU patch
the default.
GNU patch is still being built but something drastic may
happen to it to it before Release.
The FFLAGS and OFLAGS now work correctly also for files opened with O_EXEC.
Except possibly fuse, the other users pass values without O_EXEC set. fuse
appears to assume O_EXEC is handled correctly.
Although F_SETFL may not be commonly used for execute-only file descriptors,
F_GETFL may be useful to find the access mode.
This driver is based on Linux 3.8 and a previous effort by kan@.
More informations about this project can be found on the FreeBSD wiki:
https://wiki.freebsd.org/AMD_GPU
The driver is split into:
sys/dev/drm2:
The driver sources.
sys/modules/drm2/radeonkmw:
The driver main kernel module's Makefile.
sys/modules/drm2/radeonkmsfw:
All firmware kernel module Makefiles. There's one directory and one
Makefile for each firmware.
sys/contrib/dev/drm2/radeonkmsfw:
All firmware binary sources.
tools/tools/drm/radeon
Tools to update firmwares or regenerate some headers.
Merging the driver to FreeBSD 9.x may be possible but not a priority for
now.
Help from: kib@, kan@
Tested by: avg@, kwm@, ray@,
Alexander Yerenkow <yerenkow@gmail.com>,
Anders Bolt-Evensen <andersbo87@me.com>,
Denis Djubajlo <stdedjub@googlemail.com>,
J.R. Oldroyd <fbsd@opal.com>,
Mikaël Urankar <mikael.urankar@gmail.com>,
Pierre-Emmanuel Pédron <pepcitron@gmail.com>,
Sam Fourman Jr. <sfourman@gmail.com>,
Wade <wade-is-great@live.com>,
(probably other I forgot...)
HW donations: kyzh, Yakaz
This header can be easily updated using the new "gen-drm_pciids" script,
available in tools/tools/drm. The script uses the Linux' drm_pciids.h
header for new IDs, the FreeBSD's one because we add the name of the
device to each IDs, and the PCI IDs database (misc/pciids port) to fill
this name automatically for new IDS.
To call the script:
tools/tools/drm/gen-drm_pciids \
/path/to/linux/drm_pciids.h \
/path/to/freebsd/drm_pciids.h \
/path/to/pciids/pci.ids
As per POSIX, a simple command must have at least one redirection,
assignment word or command word.
These occured in rare cases such as eval "f()" .
The extension of allowing no commands inside { }, if, while, for, etc.
remains.
POSIX does not require ++ and -- in arithmetic. It is probably more useful
to reject them than to treat ++x and --x as x silently.
Note that the behaviour of increment and decrement can be obtained via
(x+=1), ((x+=1)-1), (x-=1) and ((x-=1)+1).
PR: bin/176444
extensions and also tried to be link time compatible with ports libiconv.
This splits that functionality and enables the parts that shouldn't
interfere with the port by default.
WITH_ICONV (now on by default) - adds iconv.h, iconv_open(3) etc.
WITH_LIBICONV_COMPAT (off by default) adds the libiconv_open etc API, linker
symbols and even a stub libiconv.so.3 that are good enough to be able
to 'pkg delete -f libiconv' on a running system and reasonably expect it
to work.
I have tortured many machines over the last few days to try and reduce
the possibilities of foot-shooting as much as I can. I've successfully
recompiled to enable and disable the libiconv_compat modes, ports that use
libiconv alongside system iconv etc. If you don't enable the
WITH_LIBICONV_COMPAT switch, they don't share symbol space.
This is an extension of behavior on other system. iconv(3) is a standard
libc interface and libiconv port expects to be able to run alongside it on
systems that have it.
Bumped osreldate.
devices and the FreeBSD USB stack itself. This program can be used to
test compliance against well established usb.org standards, also
called chapter-9 tests. The host platform can act as either USB device
or USB host depending on the available hardware. The basic USB
communication happens through FreeBSD's own libusb v2, and some
sysctls are also used to invoke specific error conditions. This test
program can be used to verify correct operation of external USB
harddisks under heavy load and various other conditions. The software
is driven via a simple command line interface. Main supported USB host
classes are "USB mass storage" and "USB modems".
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: so (des)
Remove it if the knob isn't tweaked. Certain ports seem to think that
if /usr/bin/iconv exists, then libc has built in libiconv things and will
blow up pretty nicely when built.
Reviewed by: gjb@
MFC after: 2 weeks
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
all T4 and T5 based cards and is useful for analyzing TSO, LRO, TOE, and
for general purpose monitoring without tapping any cxgbe or cxl ifnet
directly.
Tracers on the T4/T5 chips provide access to Ethernet frames exactly as
they were received from or transmitted on the wire. On transmit, a
tracer will capture a frame after TSO segmentation, hw VLAN tag
insertion, hw L3 & L4 checksum insertion, etc. It will also capture
frames generated by the TCP offload engine (TOE traffic is normally
invisible to the kernel). On receive, a tracer will capture a frame
before hw VLAN extraction, runt filtering, other badness filtering,
before the steering/drop/L2-rewrite filters or the TOE have had a go at
it, and of course before sw LRO in the driver.
There are 4 tracers on a chip. A tracer can trace only in one direction
(tx or rx). For now cxgbetool will set up tracers to capture the first
128B of every transmitted or received frame on a given port. This is a
small subset of what the hardware can do. A pseudo ifnet with the same
name as the nexus driver (t4nex0 or t5nex0) will be created for tracing.
The data delivered to this ifnet is an additional copy made inside the
chip. Normal delivery to cxgbe<n> or cxl<n> will be made as usual.
/* watch cxl0, which is the first port hanging off t5nex0. */
# cxgbetool t5nex0 tracer 0 tx0 (watch what cxl0 is transmitting)
# cxgbetool t5nex0 tracer 1 rx0 (watch what cxl0 is receiving)
# cxgbetool t5nex0 tracer list
# tcpdump -i t5nex0 <== all that cxl0 sees and puts on the wire
If you were doing TSO, a tcpdump on cxl0 may have shown you ~64K
"frames" with no L3/L4 checksum but this will show you the frames that
were actually transmitted.
/* all done */
# cxgbetool t5nex0 tracer 0 disable
# cxgbetool t5nex0 tracer 1 disable
# cxgbetool t5nex0 tracer list
# ifconfig t5nex0 destroy
The BSD-licensed patch(1) command has matured and it's behaviour
can be considered equivalent to the older version of GNU patch
in the tree.
The switch has been extensively tested [1] and only two ports
presented regressions, which have since been fixed.
For convenience a new WITH_GNU_PATCH option is available,
but it will likely be removed in the near future.
PR: 176313
Approved by: portmgr
make the ARM EABI the default ABI on arm, armeb, armv6 and armv6eb.
This is intended to be the default ABI from now on with the old ABI to be
retired. Because of this all users are strongly suggested to upgrade to the
ARM EABI.
As the two ABIs are incompatible it is unlikely upgrading in place will
work. Users should perform a full backup and either use an external machine
to upgrade, or install to an alternative location on their media. They
should also reinstall all ports or packages when these are available.
The only known issues are:
- pkg incorrectly detects the ABI. This is fixed upstream, and will a
patch will be made to the port.
- GDB can have issues with executables built with clang.
__FreeBSD_version has been bumped.
Although using -i with -c does not seem very useful, it seems inappropriate
to read commands from the terminal in this case.
Side effect: if the -s -c extension is used and the -s option is turned off
using 'set +s' during the interactive part, the shell now exits after an
error or interrupt. Note that POSIX only specifies -s as option to sh, not
to set.
See also Austin Group issue #718.
- spa status can not be called before spa init
- libzfs.h inclusion is now required
- fix alternative code for explicit root dataset lookup
MFC after: 10 days
This is a workaround for WITH_LDNS_UTILS forcing BIND_UTILS off. It can
be reverted when we no longer have these conflicting options, or made more
general if we grow more cases like this.
This small utility performs a sequence of atomic operations with random
parameters on an atomic variable. For every type, we also create 16
variables, to ensure that we test the correctness at different
alignments.
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
This is required by POSIX, at least for pids that are not known child
processes.
Other problems with job specifications still cause wait to abort with
exit status 2.
PR: 176916
This is only part of the PR; the behaviour for unknown/invalid pids/jobs
remains unchanged (aborts the builtin with status 2).
PR: 176916
Submitted by: Vadim Goncharov
+ pkt-gen -f rx now remains active even when traffic stops
Previous behaviour (exit after 1 second of silence) can be
restored with the -W option
+ the -X option does a hexdump of the content of a packet (both tx and rx).
This can be useful to check what goes in and out.
+ the -I option instructs the sender to use indirect buffers
(not really useful other than to test the kernel module in the
VALE switch)
I initially thought wchar_t was locale independent, but this seems to be
only the case on Linux. This means that we cannot depend on the *wc*()
routines to implement *c16*() and *c32*(). Instead, use the Citrus
libiconv that is part of libc.
I'll see if there is anything I can do to make the existing functions
somewhat useful in case the system is built without libiconv in the
nearby future. If not, I'll simply remove the broken implementations.
Reviewed by: jilles, gabor
long double versions don't pass yet. (They are rather nit-picky cases,
so there's ongoing discussion with Bruce about whether it is worth the
performance cost.)
because different tests have different ideas about what it means to be
"close enough" to the right answer, depending on the properties of the
function being tested. In the process, I fixed some warnings and
added a few more 'volatile' hacks, which are sufficient to make all
the tests pass at -O2 with clang.
This reverts commit r247274.
As maintainer of sh, I disapprove of this feature addition.
It is too specific and can be done without easily using find(1) or stat(1).
I will add some hints to the test(1) man page shortly.
In general, FreeBSD sh is not the place to invent new shell language
features. This is how it has been maintained and adding features randomly
does not work with that.
The new syntax (e.g. [ FILE1 -ntca FILE2 ]) looks cryptic to me.
In most shells (including our sh), break outside a loop does nothing with
status 0, or at least does not abort. Therefore, scripts sometimes (buggily)
depend on this.
- the VALE switch now support up to 254 destinations per switch,
unicast or broadcast (multicast goes to all ports).
- we can attach hw interfaces and the host stack to a VALE switch,
which means we will be able to use it more or less as a native bridge
(minor tweaks still necessary).
A 'vale-ctl' program is supplied in tools/tools/netmap
to attach/detach ports the switch, and list current configuration.
- the lookup function in the VALE switch can be reassigned to
something else, similar to the pf hooks. This will enable
attaching the firewall, or other processing functions (e.g. in-kernel
openvswitch) directly on the netmap port.
The internal API used by device drivers does not change.
Userspace applications should be recompiled because we
bump NETMAP_API as we now use some fields in the struct nmreq
that were previously ignored -- otherwise, data structures
are the same.
Manpages will be committed separately.
result depend on the cosine and sine of the imaginary part.
Small values are used in the new tests such that cosine and sine are well
defined.
Reviewed by: das
are workarounds for various symptoms of the problem described in clang
bugs 3929, 8100, 8241, 10409, and 12958.
The regression tests did their job: they failed, someone brought it
up on the mailing lists, and then the issue got ignored for 6 months.
Oops. There may still be some regressions for functions we don't have
test coverage for yet.
The <uchar.h> header, part of C11, adds a small number of utility
functions for 16/32-bit "universal" characters, which may or may not be
UTF-16/32. As our wchar_t is already ISO 10646, simply add light-weight
wrappers around wcrtomb() and mbrtowc().
While there, also add (non-yet-standard) _l functions, similar to the
ones we already have for the other locale-dependent functions.
Reviewed by: theraven
If 'e' is used, the kernel must support the recently added pipe2() system
call.
The use of pipe2() with O_CLOEXEC also fixes race conditions between
concurrent popen() calls from different threads, even if the close-on-exec
flag on the fd of the returned FILE is later cleared (because popen() closes
all file descriptors from earlier popen() calls in the child process).
Therefore, this approach should be used in all cases when pipe2() can be
assumed present.
The old version of popen() rejects "re" and "we" but treats "r+e" like "r+".
specified by passing the XCC, XCXX, and XCPP variables (corresponding to
CC, CXX, and CPP) to buildworld/buildkernel. The compiler must be clang
or be configured to target the appropriate architecture.
To speed build times, if XCC is an absolute path or
WITHOUT_CROSS_COMPILER is defined then no cross compiler will be built
during the cross-tools stage.
Limited documentation of this feature can currently be found at:
https://wiki.freebsd.org/ExternalToolchain
This functionality should be considered experimental and is subject to
change without notice.
Sponsored by: DARPA, AFRL
Discussed with: imp, sjg
This test case sometimes fails because of an EINTR-related race condition.
Fixing this race condition likely requires an extra system call per byte,
which would make the read builtin even slower than it already is, or very
complicated trickery. Therefore, remove the test case for now.
* If read -t times out, return status as if interrupted by SIGALRM
(formerly 1).
* If a trapped signal interrupts read, return status 128+sig (formerly 1).
* If [EINTR] occurs but there is no trap, retry the read (for example
because of a SIGWINCH in interactive mode).
* If a read error occurs, write an error message and return status 2.
As before, a variable assignment error returns 2 and discards the remaining
data read.
Generate images sparsely. This saves space and time, especially when
generating images inside a VM (PR 173482).
Add a 'true' statement to last_orders to prevent some version of sh from
tripping over an empty function.
The European version of the patent expired in 2011.
The US version of the patent expired in 2012 or prior.
Reviewed by: des
No objection from: cperciva, ehaupt
upcoming 3.3 release (branching and freezing expected in a few weeks).
Preliminary release notes can be found at the usual location:
<http://llvm.org/docs/ReleaseNotes.html>
An MFC is planned once the actual 3.3 release is finished.
Words in shell script are separated by spaces or tabs independent of the
value of IFS. The value of IFS is only relevant for the result of
substitutions. Therefore, there should be a space between 'wordexp' and the
words to be expanded, not an IFS character.
Paranoia might dictate that the shell ignore IFS from the environment (even
though our sh currently uses it), so do not depend on it in the new test
case.
includes support for the NIC and TOE features of the 40G, 10G, and
1G/100M cards based on the T5.
The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4)
has been updated instead of writing a brand new driver. T5 cards will
show up as cxl (short for cxlgb) ports attached to the t5nex bus driver.
Sponsored by: Chelsio
u_long. Before this change it was of type int for syscalls, but prototypes
in sys/stat.h and documentation for chflags(2) and fchflags(2) (but not
for lchflags(2)) stated that it was u_long. Now some related functions
use u_long type for flags (strtofflags(3), fflagstostr(3)).
- Make path argument of type 'const char *' for consistency.
Discussed on: arch
Sponsored by: The FreeBSD Foundation
If syntactically invalid job identifiers are to be taken as jobs that exited
with status 127, this should not apply to options, so that we can add
options later if need be.
LibYAML is a YAML 1.1 parser and emitter under MIT license which will
soon be used by the pkg boostrap (usr.bin/pkg) and bhyve
Reviewed by: roberto, antoine
This ensures 'return' in a trap returns the correct status to the caller.
If evalskip is not set or if it is overridden by a previous evalskip, keep
the old behaviour of restoring the exit status from before the trap.
routines provide write-only stdio FILE objects that store their data in a
dynamically allocated buffer. They are a string builder interface somewhat
akin to a completely dynamic sbuf.
Reviewed by: bde, jilles (earlier versions)
MFC after: 1 month
access, birth, change and modify times of two files, instead of only
being able to compare modify times. The builtin test in sh(1) will
automagically acquire the same expansion.
Approved by: grog
MFC after: 2 weeks
