Commit Graph

76 Commits

Author SHA1 Message Date
Marcel Moolenaar
8773a80baf Sanity the RTC code:
o  Remove the clock interface. Not only does it conflict with the MI
   version when device genclock is added to the kernel, it was also
   not possible to have more than 1 clock device. This of course would
   have been a problem if we actually had more than 1 clock device.
   In short: we don't need a clock interface and if we do eventually,
   we should be using the MI one.
o  Rewrite inittodr() and resettodr() to take into account that:
   1)  We use the EFI interface directly.
   2)  time_t is 64-bit and we do need to make sure we can determine
       leap years from year 2100 and on. Add a nice explanation of
       where leap years come from and why.
   3)  This rewrite happened in 2005 so any date prior to 1/1/2005
       (either M/D/Y or D/M/Y) is bogus. Reprogram the EFI clock with
       1/1/2005 in that case.
   4)  The EFI clock has a high probability of being correct, so
       only (further) correct the EFI clock when the file system time
       is larger. That should never happen in a time-synchronised world.
       Complain when EFI lost 2 days or more.

Replace the copyright notice now that I (pretty much) rewrote all of
this file.
2005-04-22 05:04:58 +00:00
John Baldwin
c6a37e8413 Divorce critical sections from spinlocks. Critical sections as denoted by
critical_enter() and critical_exit() are now solely a mechanism for
deferring kernel preemptions.  They no longer have any affect on
interrupts.  This means that standalone critical sections are now very
cheap as they are simply unlocked integer increments and decrements for the
common case.

Spin mutexes now use a separate KPI implemented in MD code: spinlock_enter()
and spinlock_exit().  This KPI is responsible for providing whatever MD
guarantees are needed to ensure that a thread holding a spin lock won't
be preempted by any other code that will try to lock the same lock.  For
now all archs continue to block interrupts in a "spinlock section" as they
did formerly in all critical sections.  Note that I've also taken this
opportunity to push a few things into MD code rather than MI.  For example,
critical_fork_exit() no longer exists.  Instead, MD code ensures that new
threads have the correct state when they are created.  Also, we no longer
try to fixup the idlethreads for APs in MI code.  Instead, each arch sets
the initial curthread and adjusts the state of the idle thread it borrows
in order to perform the initial context switch.

This change is largely a big NOP, but the cleaner separation it provides
will allow for more efficient alternative locking schemes in other parts
of the kernel (bare critical sections rather than per-CPU spin mutexes
for per-CPU data for example).

Reviewed by:	grehan, cognet, arch@, others
Tested on:	i386, alpha, sparc64, powerpc, arm, possibly more
2005-04-04 21:53:56 +00:00
Warner Losh
685e700261 It appears that 'kbd' device has never been used and isn't needed.
Build tests show that this isn't used for GENERIC or LINT, and nobody
seemed to know why they existed.
2004-11-23 00:00:43 +00:00
Marcel Moolenaar
03bfdd1362 Move the IA-32 trap handling from trap() to ia32_trap(). Move the
ia32_syscall() function along with it to ia32_trap.c. When COMPAT_IA32
is not defined, we'll raise SIGEMT instead.
2004-09-25 04:27:44 +00:00
Marcel Moolenaar
97752b2cbd Catch up with the drive-by renaming of IA32 to COMPAT_IA32. It must
have been rush hour...

While here, move COMPAT_IA32 from opt_global.h to opt_compat.h like on
amd64. Consequently, it's unsafe to use the option in pcb.h. We now
unconditionally have the ia32 specific registers in the PCB.

This commit is untested.
2004-08-16 18:54:23 +00:00
Mark Murray
8ab2f5ecc5 Break out the MI part of the /dev/[k]mem and /dev/io drivers into
their own directory and module, leaving the MD parts in the MD
area (the MD parts _are_ part of the modules). /dev/mem and /dev/io
are now loadable modules, thus taking us one step further towards
a kernel created entirely out of modules. Of course, there is nothing
preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
Marcel Moolenaar
5971a234e5 Hook the GDB backend into the build. 2004-07-10 23:31:17 +00:00
Nate Lawson
f1ca765c85 Move acpi_if.m to files.{amd64,i386,ia64}. This should fix the alpha build.
Pointed out by:	gallatin
2004-06-30 14:19:28 +00:00
Marcel Moolenaar
985b853f84 o De-support fdc(4). No ia64 has ever been made with PC floppy and
the likelyhood of one ever being made is nil.
o  While here, de-support sio(4).
2004-05-17 06:51:19 +00:00
Warner Losh
6cd91141eb Move fdc from isa/fd.c to dev/fdc/fdc.c. The old files were
repocopied.  Soon there will be additional bus attachments and
specialization for isa, acpi and pccard (and maybe pc98's cbus).

This was approved by nate, joerg and myself.  bde dissented on the new
location, but appeared to be OK after some discussion.
2004-05-17 05:46:16 +00:00
Marcel Moolenaar
6dc20b6610 Remove unwinder files that are commented-out. 2004-05-07 03:56:00 +00:00
Alan Cox
1af1ebb84e - Add uiomove_fromphys() implementations to alpha and ia64. These only
differ trivially from amd64.
 - Correct a spelling error in a comment.
2004-03-20 21:06:20 +00:00
Dag-Erling Smørgrav
1de30b60cb Add ffsl(), fls() flsl() to platforms that don't already have them. 2004-01-13 15:37:23 +00:00
Peter Wemm
64d85faa1c Assimilate ia64 back into the fold with the common freebsd32/ia32 code.
The split-up code is derived from the ia64 code originally.

Note that I have only compile-tested this, not actually run-tested it.
The ia64 side of the force is missing some significant chunks of signal
delivery code.
2003-12-11 01:05:09 +00:00
Peter Wemm
419d43c635 Use gcc's superior ffs() builtin. 2003-12-10 22:51:40 +00:00
Marcel Moolenaar
4d85274d1a Remove unused file. db_disasm() has been implemented in db_interface.c
now.
2003-10-24 06:48:41 +00:00
Marcel Moolenaar
1f98bf53d9 Hook-up the new disassembler. 2003-10-23 06:11:37 +00:00
Marcel Moolenaar
b8d941f010 Move uma_small_alloc() and uma_small_free() to uma_machdep.c. These
functions reference UMA internals from <vm/uma_int.h>, which makes
them highly unwanted in non-UMA specific files.

While here, prune the includes in pmap.c and use __FBSDID(). Move
the includes above the descriptive comment.

The copyright of uma_machdep.c is assigned to the project and can
be reassigned to the foundation if and when when such is preferrable.
2003-09-20 19:27:48 +00:00
Marcel Moolenaar
2bec1c8919 Hook-up the uart(4) driver to the build. For a detailed description
of what uart(4) is and/or is not see the initial commit log of one
of the files in sys/dev/uart (or see share/man/man4/uart.4).

Note that currently pc98 shares the MD file with i386. This needs
to change when pc98 support is fleshed-out to properly support the
various UARTs. A good example is sparc64 in this respect.

We build uart(4) as a module on all platforms. This may break
the ppc port. That depends on whether they do actually build
modules.

To use uart(4) on alpha, one must use the NO_SIO option.
2003-09-06 23:23:26 +00:00
Marcel Moolenaar
c42c5d3f7a Add rules for font.h and ukbdmap.h. Needed for LINT. 2003-08-23 02:33:36 +00:00
Marcel Moolenaar
7b50deb12e Add ptrace_machdep.c. 2003-08-15 18:01:10 +00:00
Marcel Moolenaar
efa60f3b1a Fix ordering bug created by previous commit. While here, make ppc(4)
dependent on isa.
2003-08-01 05:28:43 +00:00
Doug Ambrisko
a373227418 Add printer support to puc(4) driver.
-	Move isa/ppc* to sys/dev/ppc (repo-copy)
      -	Add an attachment method to ppc for puc
      -	In puc we need to walk the chain of parents.
Still to do, is to make ppc(4) & puc(4) work on other platforms.  Testers
wanted.

PR:		38372 (in spirit done differently)
Verified by:	Make universe (if I messed up a platform please fix)
2003-08-01 02:25:32 +00:00
Ruslan Ermilov
0be33d3321 The .s files were repo-copied to .S files.
Approved by:	marcel
Repocopied by:	joe
2003-07-02 12:57:07 +00:00
Marcel Moolenaar
f2c49dd248 Revamp of the syscall path, exception and context handling. The
prime objectives are:
o  Implement a syscall path based on the epc inststruction (see
   sys/ia64/ia64/syscall.s).
o  Revisit the places were we need to save and restore registers
   and define those contexts in terms of the register sets (see
   sys/ia64/include/_regset.h).

Secundairy objectives:
o  Remove the requirement to use contigmalloc for kernel stacks.
o  Better handling of the high FP registers for SMP systems.
o  Switch to the new cpu_switch() and cpu_throw() semantics.
o  Add a good unwinder to reconstruct contexts for the rare
   cases we need to (see sys/contrib/ia64/libuwx)

Many files are affected by this change. Functionally it boils
down to:
o  The EPC syscall doesn't preserve registers it does not need
   to preserve and places the arguments differently on the stack.
   This affects libc and truss.
o  The address of the kernel page directory (kptdir) had to
   be unstaticized for use by the nested TLB fault handler.
   The name has been changed to ia64_kptdir to avoid conflicts.
   The renaming affects libkvm.
o  The trapframe only contains the special registers and the
   scratch registers. For syscalls using the EPC syscall path
   no scratch registers are saved. This affects all places where
   the trapframe is accessed. Most notably the unaligned access
   handler, the signal delivery code and the debugger.
o  Context switching only partly saves the special registers
   and the preserved registers. This affects cpu_switch() and
   triggered the move to the new semantics, which additionally
   affects cpu_throw().
o  The high FP registers are either in the PCB or on some
   CPU. context switching for them is done lazily. This affects
   trap().
o  The mcontext has room for all registers, but not all of them
   have to be defined in all cases. This mostly affects signal
   delivery code now. The *context syscalls are as of yet still
   unimplemented.

Many details went into the removal of the requirement to use
contigmalloc for kernel stacks. The details are mostly CPU
specific and limited to exception_save() and exception_restore().
The few places where we create, destroy or switch stacks were
mostly simplified by not having to construct physical addresses
and additionally saving the virtual addresses for later use.

Besides more efficient context saving and restoring, which of
course yields a noticable speedup, this also fixes the dreaded
SMP bootup problem as a side-effect. The details of which are
still not fully understood.

This change includes all the necessary backward compatibility
code to have it handle older userland binaries that use the
break instruction for syscalls. Support for break-based syscalls
has been pessimized in favor of a clean implementation. Due to
the overall better performance of the kernel, this will still
be notived as an improvement if it's noticed at all.

Approved by: re@ (jhb)
2003-05-16 21:26:42 +00:00
Marcel Moolenaar
b1c4ed2222 Sort lines. 2003-04-29 05:38:41 +00:00
Poul-Henning Kamp
daabb372ca Separate the encoding/decoding functions for struct disklabel into a
separate source file which can be used from both kernel and userland code.
2003-04-17 07:39:03 +00:00
Poul-Henning Kamp
6e03422af0 Move the functions for encoding decoding struct dos_partition into
a separate .c file so they can be used from userland as well.
2003-04-12 08:34:40 +00:00
Ruslan Ermilov
5d1b6a85bc Standardize handling of locore.[sS] etc. files.
Submitted by:	jake, bde, ru
2003-02-28 21:59:14 +00:00
Marcel Moolenaar
dc00c828e3 Remove special casing for running in the simulator from the kernel
and instead add platform, firmware and EFI stubs to the loader.
The net effect of this change is that besides a special console and
disk driver, the kernel has no knowledge of the simulator. This has
the following advantages:
o  Simulator support is much harder to break,
o  It's easier to make use of more feature complete simulators.
   This would only need a change in the simulator specific loader,
o  Running SMP kernels within the simulator. Note that ski at this
   time does not simulate IPIs, so there's no way to start APs.

The platform, firmware and EFI stubs describe the following hardware:
o  4 CPU Itanium,
o  128 MB RAM within the 4GB address space,
o  64 MB RAM above the 4GB address space.

NOTE: The stubs in the skiloader describe a machine that should in
parts be defined by the simulator. Things like processor interrupt
block and AP wakeup vector cannot be choosen at random because they
require interpretation by the simulator. Currently the simulator is
ignorant of this.

This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS
which is ignored by the simulator.

Tested with: ski (version 0.943 for linux)
2003-02-01 22:50:09 +00:00
Poul-Henning Kamp
30b745b6ed Remove entries for files we don't have.
Approved by:	peter
2003-01-30 06:26:17 +00:00
Poul-Henning Kamp
a025fbfdc6 NO_GEOM cleanup: subr_disklabel.c no longer needed. 2003-01-28 14:51:32 +00:00
Poul-Henning Kamp
f527e9857e ia64 didn't need subr_diskslice.c and subr_diskmbr.c either. 2003-01-17 22:09:12 +00:00
Poul-Henning Kamp
2a2c796213 Move subr_disklabel.c and subr_diskslice.c from being MI to MD files,
so that they can be left out where they are unneeded.
2003-01-17 18:32:39 +00:00
Jake Burkholder
a360a43dd5 Improve the way that an elf image activator for an alternate word size is
included in the kernel.  Include imgact_elf.c in conf/files,  instead of
both imgact_elf32.c and imgact_elf64.c, which will use the default word
size for an architecture as defined in machine/elf.h.  Architectures that
wish to build an additional image activator for an alternate word size can
include either imgact_elf32.c or imgact_elf64.c in files.${ARCH}, which
allows it to be dependent on MD options instead of solely on architecture.

Glanced at by:	peter
2003-01-04 22:07:48 +00:00
John Baldwin
d2ec391b39 Rename 'device acpica' to 'device acpi'.
Approved by:	msmith, iwasaki
2002-10-24 19:05:04 +00:00
Marcel Moolenaar
628d99be0d Make the unwind functions standard and not optional on ddb. They
will eventually be used for ktrace(2) too.
2002-10-19 04:02:16 +00:00
Peter Wemm
ffd6bca040 geom_mbr.c and geom_bsd.c would be kinda useful here too, at least
for a while.
2002-10-10 00:58:23 +00:00
Poul-Henning Kamp
3bd6561289 NB: This commit does *NOT* make GEOM the default in FreeBSD
NB: But it will enable it in all kernels not having options "NO_GEOM"

Put the GEOM related options into the intended order.

Add "options NO_GEOM" to all kernel configs apart from NOTES.

In some order of controlled fashion, the NO_GEOM options will be
removed, architecture by architecture in the coming days.

There are currently three known issues which may force people to
need the NO_GEOM option:

boot0cfg/fdisk:
        Tries to update the MBR while it is being used to control
        slices.  GEOM does not allow this as a direct operation.

SCSI floppy drives:
        Appearantly the scsi-da driver return "EBUSY" if no media
        is inserted.  This is wrong, it should return ENXIO.

PC98:
        It is unclear if GEOM correctly recognizes all variants of
        PC98 disklabels.  (Help Wanted!  I have neither docs nor HW)

These issues are all being worked.

Sponsored by:	DARPA & NAI Labs.
2002-10-05 16:35:33 +00:00
Sam Leffler
8b7ce2ff52 hookup new crypto support to the config/build process 2002-10-04 20:42:36 +00:00
Peter Wemm
5452db4885 de-count atkbdc and sc. Folks, remove the '1' from 'device sc 1' and
'device atkbdc 1'.
2002-08-19 23:59:21 +00:00
John Baldwin
ba268f0312 Move sio_isa.c back to MD files files due to PC98 brain damage. 2002-07-24 12:35:52 +00:00
Peter Wemm
3ebc124838 Infrastructure tweaks to allow having both an Elf32 and an Elf64 executable
handler in the kernel at the same time.  Also, allow for the
exec_new_vmspace() code to build a different sized vmspace depending on
the executable environment.  This is a big help for execing i386 binaries
on ia64.   The ELF exec code grows the ability to map partial pages when
there is a page size difference, eg: emulating 4K pages on 8K or 16K
hardware pages.

Flesh out the i386 emulation support for ia64.  At this point, the only
binary that I know of that fails is cvsup, because the cvsup runtime
tries to execute code in pages not marked executable.

Obtained from:  dfr (mostly, many tweaks from me).
2002-07-20 02:56:12 +00:00
John Baldwin
bdff575a42 Move all the sio(4) attachments (except for pc98's cbus attachment) to the
MI files file.  We can't move sio.c because pc98 uses a custom version.
2002-07-15 15:47:34 +00:00
Jake Burkholder
60b22c6d62 ${MACHINE_ARCH}dump.c -> dump_machdep.c. 2002-05-13 02:40:21 +00:00
Marcel Moolenaar
4ee5409b54 Add mca.c. 2002-04-28 08:43:47 +00:00
Doug Rabson
989db74d57 Add IA32 option for emulation of i386 binaries on the ia64 platform. 2002-04-10 19:35:50 +00:00
Marcel Moolenaar
561419e427 Actually have ia64dump.c be included in the build. Can't be bad. 2002-04-03 04:42:14 +00:00
Matthew Dillon
d74ac6819b Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit().  Cleanup the td_savecrit field by moving it
from MI to MD.  Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).

Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections.  This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.

This is the stage-1 commit.  Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways.  This should
be temporary.

Reviewed by:	core
Approved by:	core
2002-03-27 05:39:23 +00:00
Hajimu UMEMOTO
b5a8f767a6 - Speedup 3DES by using assembly code for i386.
- Sync des/blowfish to more recent openssl.

Obtained from:	KAME/NetBSD
MFC after:	2 weeks
2002-03-05 09:19:02 +00:00