Commit Graph

27 Commits

Author SHA1 Message Date
Paolo Pisati
2b40ce00a5 Raise a bit ipfw kld priority.
Discussed on: net-, ipfw-.
2008-03-03 10:12:46 +00:00
Oleg Bulyzhin
897c0f57d4 1) dummynet_io() declaration has changed.
2) Alter packet flow inside dummynet: allow certain packets to bypass
dummynet scheduler. Benefits are:

- lower latency: if packet flow does not exceed pipe bandwidth, packets
  will not be (up to tick) delayed (due to dummynet's scheduler granularity).
- lower overhead: if packet avoids dummynet scheduler it shouldn't reenter ip
  stack later. Such packets can be fastforwarded.
- recursion (which can lead to kernel stack exhaution) eliminated. This fix
  long existed panic, which can be triggered this way:
  	kldload dummynet
	sysctl net.inet.ip.fw.one_pass=0
	ipfw pipe 1 config bw 0
	for i in `jot 30`; do ipfw add 1 pipe 1 icmp from any to any; done
	ping -c 1 localhost

3) Three new sysctl nodes are added:
net.inet.ip.dummynet.io_pkt -		packets passed to dummynet
net.inet.ip.dummynet.io_pkt_fast - 	packets avoided dummynet scheduler
net.inet.ip.dummynet.io_pkt_drop -	packets dropped by dummynet

P.S. Above comments are true only for layer 3 packets. Layer 2 packet flow
     is not changed yet.

MFC after:	3 month
2007-11-06 23:01:42 +00:00
Mike Silbersack
4b421e2daa Add FBSDID to all files in netinet so that people can more
easily include file version information in bug reports.

Approved by:	re (kensmith)
2007-10-07 20:44:24 +00:00
Paolo Pisati
ff2f6fe80f Summer of Code 2005: improve libalias - part 2 of 2
With the second (and last) part of my previous Summer of Code work, we get:

-ipfw's in kernel nat

-redirect_* and LSNAT support

General information about nat syntax and some examples are available
in the ipfw (8) man page. The redirect and LSNAT syntax are identical
to natd, so please refer to natd (8) man page.

To enable in kernel nat in rc.conf, two options were added:

o firewall_nat_enable: equivalent to natd_enable

o firewall_nat_interface: equivalent to natd_interface

Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet
to continue being checked by the firewall ruleset after being
(de)aliased.

NOTA BENE: due to some problems with libalias architecture, in kernel
nat won't work with TSO enabled nic, thus you have to disable TSO via
ifconfig (ifconfig foo0 -tso).

Approved by: glebius (mentor)
2006-12-29 21:59:17 +00:00
Julian Elischer
010b65f54a revert last change.. premature.. need to wait until if_ethersubr.c
uses pfil to get to ipfw.
2006-10-21 00:16:31 +00:00
Julian Elischer
3df668cc38 Move some variables to a more likely place
and remove "temporary" stuff that is not needed any more.
2006-10-20 19:32:08 +00:00
Max Laier
e93187482d Reintroduce net.inet6.ip6.fw.enable sysctl to dis/enable the ipv6 processing
seperately.  Also use pfil hook/unhook instead of keeping the check
functions in pfil just to return there based on the sysctl.  While here fix
some whitespace on a nearby SYSCTL_ macro.
2006-05-12 04:41:27 +00:00
Hajimu UMEMOTO
8846bbf3ce obey opt_inet6.h and opt_ipsec.h in kernel build directory.
Requested by:	hrs
2005-11-29 17:56:11 +00:00
Brooks Davis
8195404bed Add IPv6 support to IPFW and Dummynet.
Submitted by:	Mariano Tortoriello and Raffaele De Lorenzo (via luigi)
2005-04-18 18:35:05 +00:00
Gleb Smirnoff
8351d04f34 When a packet has been reinjected into ipfw(4) after dummynet(4) processing
we have a non-NULL args.rule. If the same packet later is subject to "tee"
rule, its original is sent again into ipfw_chk() and it reenters at the same
rule. This leads to infinite loop and frozen router.

Assign args.rule to NULL, any time we are going to send packet back to
ipfw_chk() after a tee rule. This is a temporary workaround, which we
will leave for RELENG_5. In HEAD we are going to make divert(4) save
next rule the same way as dummynet(4) does.

PR:		kern/79546
Submitted by:	Oleg Bulyzhin
Reviewed by:	maxim, andre
MFC after:	3 days
2005-04-06 14:00:33 +00:00
Gleb Smirnoff
670742a102 Add a ng_ipfw node, implementing a quick and simple interface between
ipfw(4) and netgraph(4) facilities.

Reviewed by:	andre, brooks, julian
2005-02-05 12:06:33 +00:00
Gleb Smirnoff
28935658c4 - Reduce number of arguments passed to dummynet_io(), we already have cookie
in struct ip_fw_args itself.
- Remove redundant &= 0xffff from dummynet_io().
2005-01-16 11:13:18 +00:00
Gleb Smirnoff
6c69a7c30b o Clean up interface between ip_fw_chk() and its callers:
- ip_fw_chk() returns action as function return value. Field retval is
  removed from args structure. Action is not flag any more. It is one
  of integer constants.
- Any action-specific cookies are returned either in new "cookie" field
  in args structure (dummynet, future netgraph glue), or in mbuf tag
  attached to packet (divert, tee, some future action).

o Convert parsing of return value from ip_fw_chk() in ipfw_check_{in,out}()
  to a switch structure, so that the functions are more readable, and a future
  actions can be added with less modifications.

Approved by:	andre
MFC after:	2 months
2005-01-14 09:00:46 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
Gleb Smirnoff
d2a09f901a Revert last change.
Andre:
  First lets get major new features into the kernel in a clean and nice way,
  and then start optimizing. In this case we don't have any obfusication that
  makes later profiling and/or optimizing difficult in any way.

Requested by:	csjp, sam
2004-12-10 07:47:17 +00:00
Gleb Smirnoff
f5a19d3909 Check that DUMMYNET_LOADED before seeking dummynet m_tag.
Reviewed by:	andre
MFC after:	1 week
2004-12-09 16:41:47 +00:00
Andre Oppermann
72584fd2c0 Convert IPDIVERT into a loadable module. This makes use of the dynamic loadability
of protocols.  The call to divert_packet() is done through a function pointer.  All
semantics of IPDIVERT remain intact.  If IPDIVERT is not loaded ipfw will refuse to
install divert rules and  natd will complain about 'protocol not supported'.  Once
it is loaded both will work and accept rules and open the divert socket.  The module
can only be unloaded if no divert sockets are open.  It does not close any divert
sockets when an unload is requested but will return EBUSY instead.
2004-10-19 21:14:57 +00:00
Max Laier
d6a8d58875 Add an additional struct inpcb * argument to pfil(9) in order to enable
passing along socket information. This is required to work around a LOR with
the socket code which results in an easy reproducible hard lockup with
debug.mpsafenet=1. This commit does *not* fix the LOR, but enables us to do
so later. The missing piece is to turn the filter locking into a leaf lock
and will follow in a seperate (later) commit.

This will hopefully be MT5'ed in order to fix the problem for RELENG_5 in
forseeable future.

Suggested by:		rwatson
A lot of work by:	csjp (he'd be even more helpful w/o mentor-reviews ;)
Reviewed by:		rwatson, csjp
Tested by:		-pf, -ipfw, LINT, csjp and myself
MFC after:		3 days

LOR IDs:		14 - 17 (not fixed yet)
2004-09-29 04:54:33 +00:00
Andre Oppermann
f91248c1ad If we have to 'ipfw fwd'-tag a packet the second time in ipfw_pfil_out() don't
prepend an already existing tag again.  Instead unlink it and prepend it again
to have it as the first tag in the chain.

PR:		kern/71380
2004-09-13 19:20:14 +00:00
Andre Oppermann
7c0102f575 Make 'ipfw tee' behave as inteded and designed. A tee'd packet is copied
and sent to the DIVERT socket while the original packet continues with the
next rule.  Unlike a normally diverted packet no IP reassembly attemts are
made on tee'd packets and they are passed upwards totally unmodified.

Note: This will not be MFC'd to 4.x because of major infrastucture changes.

PR:		kern/64240 (and many others collapsed into that one)
2004-09-13 16:46:05 +00:00
Andre Oppermann
c21fd23260 Always compile PFIL_HOOKS into the kernel and remove the associated kernel
compile option.  All FreeBSD packet filters now use the PFIL_HOOKS API and
thus it becomes a standard part of the network stack.

If no hooks are connected the entire packet filter hooks section and related
activities are jumped over.  This removes any performance impact if no hooks
are active.

Both OpenBSD and DragonFlyBSD have integrated PFIL_HOOKS permanently as well.
2004-08-27 15:16:24 +00:00
Ruslan Ermilov
9bfe6d472a Revert the last change to sys/modules/ipfw/Makefile and fix a
standalone module build in a better way.

Silence from:	andre
MFC after:	3 days
2004-08-26 14:18:30 +00:00
Andre Oppermann
ce63226177 Fix a stupid typo which prevented an ipfw KLD unload from successfully cleaning
up its remains.  Do not terminate 'if' lines with ';'.

Spotted by:	claudio@OpenBSD.ORG (sitting 3m from my desk)
Pointy hat to:	andre
2004-08-20 00:36:55 +00:00
Andre Oppermann
50ab727669 Give a useful error message if someone tries to compile IPFIREWALL into the
kernel without specifying PFIL_HOOKS as well.
2004-08-19 18:38:23 +00:00
Andre Oppermann
9108601915 Do not unconditionally ignore IPDIVERT and IPFIREWALL_FORWARD when building
the ipfw KLD.

 For IPFIREWALL_FORWARD this does not have any side effects.  If the module
 has it but not the kernel it just doesn't do anything.

 For IPDIVERT the KLD will be unloadable if the kernel doesn't have IPDIVERT
 compiled in too.  However this is the least disturbing behaviour.  The user
 can just recompile either module or the kernel to match the other one.  The
 access to the machine is not denied if ipfw refuses to load.
2004-08-19 17:59:26 +00:00
Andre Oppermann
e4c97eff8e Bring back the sysctl 'net.inet.ip.fw.enable' to unbreak the startup scripts
and to be able to disable ipfw if it was compiled directly into the kernel.
2004-08-19 17:38:47 +00:00
Andre Oppermann
9b932e9e04 Convert ipfw to use PFIL_HOOKS. This is change is transparent to userland
and preserves the ipfw ABI.  The ipfw core packet inspection and filtering
functions have not been changed, only how ipfw is invoked is different.

However there are many changes how ipfw is and its add-on's are handled:

 In general ipfw is now called through the PFIL_HOOKS and most associated
 magic, that was in ip_input() or ip_output() previously, is now done in
 ipfw_check_[in|out]() in the ipfw PFIL handler.

 IPDIVERT is entirely handled within the ipfw PFIL handlers.  A packet to
 be diverted is checked if it is fragmented, if yes, ip_reass() gets in for
 reassembly.  If not, or all fragments arrived and the packet is complete,
 divert_packet is called directly.  For 'tee' no reassembly attempt is made
 and a copy of the packet is sent to the divert socket unmodified.  The
 original packet continues its way through ip_input/output().

 ipfw 'forward' is done via m_tag's.  The ipfw PFIL handlers tag the packet
 with the new destination sockaddr_in.  A check if the new destination is a
 local IP address is made and the m_flags are set appropriately.  ip_input()
 and ip_output() have some more work to do here.  For ip_input() the m_flags
 are checked and a packet for us is directly sent to the 'ours' section for
 further processing.  Destination changes on the input path are only tagged
 and the 'srcrt' flag to ip_forward() is set to disable destination checks
 and ICMP replies at this stage.  The tag is going to be handled on output.
 ip_output() again checks for m_flags and the 'ours' tag.  If found, the
 packet will be dropped back to the IP netisr where it is going to be picked
 up by ip_input() again and the directly sent to the 'ours' section.  When
 only the destination changes, the route's 'dst' is overwritten with the
 new destination from the forward m_tag.  Then it jumps back at the route
 lookup again and skips the firewall check because it has been marked with
 M_SKIP_FIREWALL.  ipfw 'forward' has to be compiled into the kernel with
 'option IPFIREWALL_FORWARD' to enable it.

 DUMMYNET is entirely handled within the ipfw PFIL handlers.  A packet for
 a dummynet pipe or queue is directly sent to dummynet_io().  Dummynet will
 then inject it back into ip_input/ip_output() after it has served its time.
 Dummynet packets are tagged and will continue from the next rule when they
 hit the ipfw PFIL handlers again after re-injection.

 BRIDGING and IPFW_ETHER are not changed yet and use ipfw_chk() directly as
 they did before.  Later this will be changed to dedicated ETHER PFIL_HOOKS.

More detailed changes to the code:

 conf/files
	Add netinet/ip_fw_pfil.c.

 conf/options
	Add IPFIREWALL_FORWARD option.

 modules/ipfw/Makefile
	Add ip_fw_pfil.c.

 net/bridge.c
	Disable PFIL_HOOKS if ipfw for bridging is active.  Bridging ipfw
	is still directly invoked to handle layer2 headers and packets would
	get a double ipfw when run through PFIL_HOOKS as well.

 netinet/ip_divert.c
	Removed divert_clone() function.  It is no longer used.

 netinet/ip_dummynet.[ch]
	Neither the route 'ro' nor the destination 'dst' need to be stored
	while in dummynet transit.  Structure members and associated macros
	are removed.

 netinet/ip_fastfwd.c
	Removed all direct ipfw handling code and replace it with the new
	'ipfw forward' handling code.

 netinet/ip_fw.h
	Removed 'ro' and 'dst' from struct ip_fw_args.

 netinet/ip_fw2.c
	(Re)moved some global variables and the module handling.

 netinet/ip_fw_pfil.c
	New file containing the ipfw PFIL handlers and module initialization.

 netinet/ip_input.c
	Removed all direct ipfw handling code and replace it with the new
	'ipfw forward' handling code.  ip_forward() does not longer require
	the 'next_hop' struct sockaddr_in argument.  Disable early checks
	if 'srcrt' is set.

 netinet/ip_output.c
	Removed all direct ipfw handling code and replace it with the new
	'ipfw forward' handling code.

 netinet/ip_var.h
	Add ip_reass() as general function.  (Used from ipfw PFIL handlers
	for IPDIVERT.)

 netinet/raw_ip.c
	Directly check if ipfw and dummynet control pointers are active.

 netinet/tcp_input.c
	Rework the 'ipfw forward' to local code to work with the new way of
	forward tags.

 netinet/tcp_sack.c
	Remove include 'opt_ipfw.h' which is not needed here.

 sys/mbuf.h
	Remove m_claim_next() macro which was exclusively for ipfw 'forward'
	and is no longer needed.

Approved by:	re (scottl)
2004-08-17 22:05:54 +00:00