ahci.c had one signed long, which was passed into rman, rather than u_long.
After the switch of rman_res_t from size u_long to size uintmax_t, the sign
extension caused ranges to get messed up, and ahcich* to not attach.
There may be more signed longs used in this way, which will be fixed as they're
reported.
Reported by: pho
1. Limit secs to INT32_MAX / 2 to avoid errors from kern_setitimer().
Assert that kern_setitimer() returns 0.
Remove bogus cast of secs.
Fix style(9) issues.
2. Increment the return value if the remaining tv_usec value more than 500000 as a Linux does.
Pointed out by: [1] Bruce Evans
MFC after: 1 week
There's some upcoming work to add new chipset support here and I'd
like to only add 802.11n support to one driver, instead of both
urtwn and rtwn.
There's also missing support for things like 802.11n, some powersave
work, bluetooth integration/coexistence, etc, and also newer parts
(like 8192EU, maybe some 11ac parts, not sure yet.)
So, this is hopefully the first step in a longer set of steps to unify
rtwn/urtwn and extend it with more interesting chipset and functionality
support.
Reviewed by: kevlo
An IPI cannot be sent via the local APIC if a previous IPI is still
being delivered. Attempts to send an IPI will wait for a pending IPI
to clear. Prior to r278325 these checks used a spin loop with a
hardcoded maximum count which broke AP startup on some systems.
However, r278325 also enforced a minimum latency of 5 microseconds if an
IPI was still pending which resulted in a measurable performance hit.
This change reduces that minimum latency to 1 microsecond.
Tested by: stas
MFC after: 3 days
For the !unmap case it may happen that pbuf gets called unreferenced
when vm_fault_quick_hold_pages() fails.
Initialize it so it doesn't cause trouble.
CID: 1352776
Reviewed by: jhb
MFC after: 1 week
This is a subset of what's in the linux 802.11ac implementation.
I've verified that the bits that mention an 802.11ac draft are
still the same in 802.11ac-2013 and noted it accordingly.
This is for the most part one big no-op.
Obtained from: 802.11ac-2013.pdf
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
In dual emac mode, the CPSW subsystem provides two independent ethernets.
This is implemented (as recommended by TI's TRM) with a mixture of switch
settings (vlans) and specific features of CPSW subsystem.
The driver was splitted to accommodate the shared parts (RX and TX rings
for example) while it still provides two independent ethernets.
Each of the ethernet ports driver has it's own set of MDIO registers among
the other private settings.
Previously this driver always operate in promisc mode, now the Switch ALE
(address table entry) is properly initialized and enabled.
The driver is also tested (and known to work) with both ports operating in
single port mode (active_slave 0 or 1).
Tested on uBMC (dual emac mode, both ports in single mode, giga and fast
ethernet) and BBB (single port, fast ethernet).
Sponsored by: Rubicon Communications (Netgate)
This allows some simplification of its callers. No functional change
intended.
Tested by: Larry Rosenman (as part of a larger change)
MFC after: 1 month
pointer isn't NULL, it is safe, because we are handling IPV6_PKTINFO
socket option in this block of code. Also, use in6ifa_withaddr() instead
of ifa_withaddr().
We changed the ABI for ARM in 10, an removed support for the old ABI in 11,
as such binaries from these releases are unable to be run on a head kernel.
Reviewed by: bz, emast
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5652
Figure out if the chip is counting PAUSE frames in the "normal" stats
and take them out if it is. This fixes a bug in the tx stats because
the default hardware behavior is different for Tx and Rx but the driver
was treating both the same way. The result was that OPACKETS, OBYTES,
and OMCASTS were under-reported (if tx_pause > 0) before this change.
Note that the mac_stats sysctl still gives you the raw value of these
statistics straight from the device registers.
during argument validity verification, unbound zero'ing of the process LDT
and adjacent memory can be initiated from usermode.
Submitted by: CORE Security
Patch by: kib
Security: SA-16:15
r296861 addressed a build failure due to undefined SYS_freebsd6_lseek
by adding a COMPAT_FREEBSD6 conditional, but we do not support FreeBSD 6
compatibility on armeb anyway so remove it completely.
Reviewed by: andrew, bz
Differential Revision: https://reviews.freebsd.org/D5643
the ABI in 10.0, and have removed support for the old ABI in 11. As such
any of these options to provide compatibility prior to 10 are unneeded.
Sponsored by: ABT Systems Ltd
The following pheripherals are supported: UART, MMC, AHCI, EHCI, PCIe, I2C,
PMIC, GPIO, CPU temperature and clock.
Note: The PCIe driver is pure mash at this moment. It will be reworked
immediately when both D5237 and D2579 enter the current tree.
SYSCTL_COUNTER_U64_ARRAY() macro.
- Add proper asserts to the SYSCTL_COUNTER_U64_ARRAY() macro that checks
the size of the first element of the array.
- Add an example to the counter(9) manual page how to use the
SYSCTL_COUNTER_U64_ARRAY() macro.
- Add some missing symbolic links for counter(9) while at it.
When we guess the nature of the outbound packet (output vs. forwarding) we need
to take bridges into account. When bridging the input interface does not match
the output interface, but we're not forwarding. Similarly, it's possible for the
interface to actually be the bridge interface itself (and not a member interface).
PR: 202351
MFC after: 2 weeks
This is several year's worth of fail point upgrades done at EMC Isilon. They
are interdependent enough that it makes sense to put a single diff up for them.
Primarily, we added:
- Changing all mainline execution paths to be lockless, which lets us use fail
points in more sleep-sensitive areas, and allows more parallel execution
- A number of additional commands, including 'pause' that lets us do some
interesting deterministic repros of race conditions
- The ability to dump the stacks of all threads sleeping on a fail point
- A number of other API changes to allow marking up the fail point's context in
the code, and firing callbacks before and after execution
- A man page update
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: cem (earlier version), jhb, kib, pho
With feedback from: bdrewery
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5427
* Implement a new ratectl method, which defaults to returning nothing;
* Add a top level sysctl (net.wlan.X.rate_stats) to extract it;
* Add ratectl info for the 'amrr' module.
Tested:
* urtwn(4), STA mode
Differential Revision: https://reviews.freebsd.org/D5630
Prevent ixgbe outputting "Invalid advertised speed" warning on boot with
no customisations by moving test from sysctl handler to set handler.
PR: 208022
MFC after: 3 days
Sponsored by: Multiplay
Use the Toeplitz hash value as source for the flowid. This makes the
hash value more suitable for so-called hash bucket algorithms which
are used in the FreeBSD's TCP/IP stack when RSS is enabled.
Sponsored by: Mellanox Technologies
MFC after: 1 week
ipoib module.
The bpfdetach() function is trying to turn off promiscious mode on the
network interface it is attached to while holding a mutex. The fix
consists of ignoring any further calls to the ipoib_ioctl() function
when the network interface is going to be detached. The ipoib_ioctl()
function might sleep.
Sponsored by: Mellanox Technologies
MFC after: 1 week
non-multiple of 64 bytes. Thereafter, the user state save area is
misaligned, which triggers assertion in the debugging kernels, or
segmentation violation on accesses for non-debugging configs.
Force the desired alignment of the user save area as the fix
(workaround is to disable bit 9 in the hw.xsave_mask loader tunable).
This correction is required for booting on the upcoming Intel' Purley
platform.
Reported and tested by: "Pieper, Jeffrey E" <jeffrey.e.pieper@intel.com>,
jimharris
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
support frameworks (i.e. clk/regulators/tsensors/fuses...).
It provides simple unified consumers interface for manipulations with
phy (USB/SATA/PCIe) resources.
support frameworks(i.e. clk/reset/phy/tsensors/fuses...).
The framework is still far from perfect and probably doesn't have stable
interface yet, but we want to start testing it on more real boards and
different architectures.
Keymap header files have historically been generated using the build
host's /usr/sbin/kbdcontrol and using the host's keymap files.
However, that introduces an issue when building a kernel to use vt(4)
on a system using sc(4), or vice versa: kbdcontrol searches for keymap
files in the /usr/share subdirectory appropriate for the host, not the
target.
With this change the build searches both the and sc keymap directories
from the source tree.
PR: 193865
Submitted by: Harald Schmalzbauer
struct tcpstat, because the structure can be zeroed out by netstat(1) -z,
and of course running connection counts shouldn't be touched.
Place running connection counts into separate array, and provide
separate read-only sysctl oid for it.
It seems that if range within one page is given this page will not be
invalidated at all. Clean it up.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: wma, zbb
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5569
This commit provides attachment of xhci-platform for A38X boards, making
it possible to mount FreeBSD world from USB3.0 flash. 'xhci' device was
added to files.mv (as optional) and kernconf of Armada38x was enhanced.
It was also necessary to open programmable memory windows of USB3.0.
fdt_win_setup needed improvement so it's able to traverse through
children of internal-regs node.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: hselasky
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5031
After ARM_INTRNG introduction, MPIC code needed several modifications:
- IRQ resource and its handler added
- several DEVMETHODs of INTRNG interface implemented
- defines enhanced to ensure code compiles as well for AXP as for A38X
- added dummy MSI_IRQ, ERR_IRQ defines for Armada38x
- MPIC driver was added to files.armada38x, ARM_INTRNG option enabled in
kernconf file and regs of MPIC corrected in dts file.
Instead of modifying Armada38X DTS, offsets to CPU registers defined in
driver were changed. That required restoring 'reg' property of mpic node
in ArmadaXP to state compliant with Linux DTS.
Additionally, required ARM_INTRNG definitions were added to mv_common.c.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: adrian, andrew, ian, skra
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5030
This displays the IE names in ifconfig but it doesn't yet decode things.
Submitted by: Idwer Vollering <vidwer@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3782
strlens is somewhat suboptimal, but it's a temporary measure that will
be replaced with red-black trees later on.
PR: 204417
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5266
In timer2sbintime(), calculate the second and fractional second portions of
the sbintime separately. When calculating the the fractional second portion,
use a 64bit multiply to prevent excess truncation. This avoids the ~7% error
in the original conversion for ns, and smaller errors of the same type for us
and ms.
PR: 198139
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5397
The base system libc is only used to run binaries built on FreeBSD 7.0 and
later. It does not need to include system call wrappers for system calls
only used by FreeBSD binaries built on versions older than 7.0. This was
already true for "COMPAT" system calls, but now wrappers for system calls
used on FreeBSD 4 and 6 are excluded as well.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5597
Both objdump and nm are equally capable of reporting undefined symbols.
This gets us a step closer to building without binutils as we have an nm
implementation from ELF Tool Chain.
Reviewed by: bdrewery
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5613
This makes sure the default context of each ring is cleaned up with the
ring itself and fixes a memory leak.
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri May 3 16:29:08 2013 +0300
drm/i915: unreference default context on module unload
Before module unload is called, gpu_idle() will switch
to default context. This will increment ref count of base
object as the default context is 'running' on module unload
time. Unreference the drm object so that when context
is freed, base object is freed as well.
v2: added comment to explain the refcounts (Ben Widawsky)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Obtained from: Linux
defined:
sys/dev/cxgbe/t4_main.c:7474: warning: 'sysctl_tp_tick' defined but not used
sys/dev/cxgbe/t4_main.c:7505: warning: 'sysctl_tp_dack_timer' defined but not used
sys/dev/cxgbe/t4_main.c:7519: warning: 'sysctl_tp_timer' defined but not used
This just adds a bunch of #ifdef TCP_OFFLOAD in the right places.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D5620
This fixes several memory leaks. Apparently, this problem exists in
Linux 3.8 but the code changed in Linux 3.9 so it may be fixed upstream
already. Still, this is something we need to pay attention to.
... when __wait_seqno() is interrupted by a signal. In this case,
__wait_seqno() returns -ERESTARTSYS. Like we already do in drm_ioctl(),
we need to convert this error to a common code such as -EINTR, so the
page fault handler is restarted.
Reported by: Frederic Chardon <chardon.frederic@gmail.com>
Tested by: Frederic Chardon <chardon.frederic@gmail.com>
The i915 video driver doesn't depend on agp(4) anymore for Sandybridge
and later GPUs. Therefore, there is no need to attach agp(4) to those
devices.
While here, fix `agp_i965_res_spec` to include the aperture base for
GEN4 and GEN5.
Reviewed by: kib
Approved by: kib
Differential Revision: https://reviews.freebsd.org/D5586
192.168.1.1, with share "share". This commit fixes a problem
where "mkdir /net/192.168.1.1/share/meh" would return spurious
error instead of creating the directory if the target filesystem
wasn't mounted yet; subsequent attempts would work correctly.
The failure scenario is kind of complicated to explain, but it all
boils down to calling VOP_MKDIR() for the target filesystem (NFS)
with wrong dvp - the autofs vnode instead of the filesystem root
mounted over it.
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5442
This fixes the following error:
kernel: error: [drm:pid1167:drm_release] *ERROR* Device busy: 2
Because of that, drm_lastclose() was not called, leading to a few memory
leaks once the driver was unloaded.
MFC after: 1 week
pfs_visible(). The recursion does not cause deadlock because the sx
implementation does not prefer exclusive waiters over the shared, but
this is an implementation detail.
Reported by: pho, Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jhb
Tested by: pho
Approved by: des (pseudofs maintainer)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The inclusion of .MAKE.DEPENDFILE (.depend) has special logic in make
to ignore stale/missing dependencies. bmake 20160220 added a '.dinclude'
directive that uses the special logic for .depend when including the file.
This fixes a build error when a file is moved or deleted that exists in a
.depend.OBJ file. This happened in r292782 when sha512c.c "moved" and an
incremental build of lib/libmd would fail with:
make: don't know how to make /usr/src/lib/libcrypt/../libmd/sha512c.c. Stop
Now this will just be seen as a stale dependency and cause a rebuild:
make: /usr/obj/usr/src/lib/libmd/.depend.sha512c.o, 13: ignoring stale .depend for /usr/src/lib/libcrypt/../libmd/sha512c.c
--- sha512c.o ---
...
This rebuild will only be done once since the .depend.sha512c.o will
be updated on the build with the -MF flags.
This also removes -MP being passed for the .depend.OBJ generation (which
would create fake targets for system headers) since the logic is no
longer needed to protect from missing files.
Sponsored by: EMC / Isilon Storage Division
- Query the location of the log very early during attach. Refresh the
location later after establishing contact with the firmware.
- Save the log's location as a flat address in devlog_params.
- Use a memory window instead of backdoor access to the EDC/MC to read
the log.
I believe that this patch handled the problem from the wrong side.
Instead of making ZFS properly handle large stripe sizes, it made
unrelated driver to lie in reported parameters to workaround that.
Alternative solution for this problem from ZFS side was committed at
r296615.
Discussed with: smh
If device has stripe size bigger then maximal sector size supported by
ZFS, there is nothing can be done to avoid read-modify-write cycles.
Taking that stripe size into account will only reduce space efficiency
and pointlessly bother user with warnings that can not be fixed.
Discussed with: smh
Use of misaligned or non-power-of-2 stripes is not really useful for ZFS,
since increased ashift won't help to avoid read-modify-write cycles, and
only reduce pool space efficiency and compression rates.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Stefan Ring <stefanrin@gmail.com>
Reviewed by: Steven Burgess <sburgess@datto.com>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
In certain circumstances, "zfs send -i" (incremental send) can produce a
stream which will result in incorrect sparse file contents on the
target.
The problem manifests as regions of the received file that should be
sparse (and read a zero-filled) actually contain data from a file that
was deleted (and which happened to share this file's object ID).
Note: this can happen only with filesystems (not zvols, because they do
not free (and thus can not reuse) object IDs).
Note: This can happen only if, since the incremental source (FromSnap),
a file was deleted and then another file was created, and the new file
is sparse (i.e. has areas that were never written to and should be
implicitly zero-filled).
We suspect that this was introduced by 4370 (applies only if hole_birth
feature is enabled), and made worse by 5243 (applies if hole_birth
feature is disabled, and we never send any holes).
The bug is caused by the hole birth feature. When an object is deleted
and replaced, all the holes in the object have birth time zero. However,
zfs send cannot tell that the holes are new since the file was replaced,
so it doesn't send them in an incremental. As a result, you can end up
with invalid data when you receive incremental send streams. As a
short-term fix, we can always send holes with birth time 0 (unless it's
a zvol or a dataset where we can guarantee that no objects have been
reused).
Closes#37openzfs/openzfs@adef853162
TSO packets will signal segments TX completion in the separate CQ
descriptors. Each CQ descriptor for HW TSO will point to the same
SQ entry.
Do not invoke nicvf_put_sq_desc() for secondary segments to avoid
free_cnt corruption and eventually integer overflow that will result
in the negative free_cnt value and hence impossibility of further
transmission.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5535
Do not modify NIC_QSET_CQ_0_7_HEAD manually, especially
in non-atomic context.
It doesn't seem to be necessary to recreate CQ head after
interrupt clearing too.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5533
So that functions shared w/ attach path could use if_printf().
While I'm here, remove unnecessary if_dunit and if_dname assignment.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5576
