referenced by pointer, making it non-static should not have even the
negligible impact on the existing code.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
beasts still exist unfortunately. More details can be found in other
references, but the short version is that bridges with this bit set ignore
I/O port ranges that alias to valid ISA I/O port ranges. In the driver
this requires not allocating these alias regions from the parent device
(so they are free to be acquired by ISA devices), and ensuring no child
devices use resources from these alias regions.
- Change the pcib_window structure to allow for an array of backing
resources rather than a single resource and update the existing code
to cope with this. Some of the coping requires using the saved
base and limit values in pcib_window instead of using rman operations
on the backing resource.
- Add special handling for allocating and adjusting the I/O port window
of an ISA-enabled bridge to only allocate the non-alias ranges and
add those to the associated resource manager.
- Reject I/O port allocations for a fixed request that conflicts with an
ISA alias range.
- Remove the "no prefected decode" verbose printf during boot. The absence
of a "prefetched decode" line is sufficient.
- Replace the "subtractively decoded bridge" verbose printf with a single
printf that lists all the "special" decoding modes of a bridge: ISA,
subtractive, and VGA.
- Add a custom bus_release_resource() method to the PCI bus driver so that
it can properly free resources for I/O windows of PCI-PCI bridges.
(These resources are not stored in the bridge device's resource list.)
PR: misc/179033
MFC after: 2 weeks
VMware up to at least ESXi 5.1. Actually, using INTx in that case instead
may still result in interrupt storms, with MSI being the only working
option in some configurations. So introduce a PCI_QUIRK_DISABLE_MSIX quirk
which only blacklists MSI-X but not also MSI and use it for the VMware
PCI-PCI-bridges. Note that, currently, we still assume that if MSI doesn't
work, MSI-X won't work either - but that's part of the internal logic and
not guaranteed as part of the API contract. While at it, add and employ
a pci_has_quirk() helper.
Reported and tested by: Paul Bucher
- Use NULL instead of 0 for pointers.
Submitted by: jhb (mostly)
Approved by: jhb
MFC after: 3 days
bug where a PCI device would be powered down if it failed to probe, but
not when its driver was detached (e.g. via kldunload).
- Add a new helper method resource_list_release_active() which forcefully
releases any active resources of a specified type from a resource list.
- Add a bus_child_detached method for the PCI bus driver which forces any
active resources to be released (and whines to the console if it finds
any) and then powers the device down.
- Call pci_child_detached() if we fail to probe a device when a driver
is kldloaded. This isn't perfect but can avoid leaking resources
from a probe() routine in the kldload case.
Reviewed by: imp, brooks
MFC after: 1 month
tester of this fix, and realloc_bars breaks some other cases as a small
BAR that is reallocated can end up grabbing space needed by a much larger
BAR in the existing window of a PCI-PCI bridge.
MFC after: 3 days
assigned conflicting ranges to BARs then leaving the BARs alone could
result in one device stealing mmio accesses intended to go to a second
device. Prior to 233677 the PCI bus driver attempted to handle this case
by clearing the BAR to 0 depending on BARs based at 0 not decoding (which
is not guaranteed to be true). Now when a conflicting BAR is detected the
following steps are taken:
1) If hw.pci.realloc_bars (a new tunable) is enabled (default is enabled),
then ignore the current BAR setting from the firmware and attempt to
allocate a fresh resource range for the BAR.
2) If 1) failed (or was disabled), disable decoding for the relevant
BAR type (e.g. disable mem decoding for a memory BAR) and emit a
warning if booting verbose.
Tested by: Alex Keda <admin@lissyara.su>
MFC after: 1 week
devices. While at it, update the comment now that we know that MSI-X
doesn't work with ESXi 5.1 for Intel 82576 either and the underlying issue
is a bug in the MSI-X allocation code of the hypervisor.
Reported by: Harald Schmalzbauer
- Make the nomatch table const.
MFC after: 1 week
them, please let me know if not). Most of these are of the form:
static const struct bzzt_type {
[...list of members...]
} const bzzt_devs[] = {
[...list of initializers...]
};
The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).
I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).
Reviewed by: yongari, marius
MFC after: 1 week
#defines. This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.
This is a mostly mechanical rename:
s/PCIR_EXPRESS_/PCIER_/g
s/PCIM_EXP_/PCIEM_/g
s/PCIM_LINK_/PCIEM_LINK_/g
When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.
Discussed with: jhb
MFC after: 1 week
and deactivating PCI resources. Previously, if a device had more than
48 MSI interrupts, then activating message 48 (which has a rid == PCIR_BIOS)
would incorrectly try to enable the PCI ROM BAR.
Tested by: Olivier Cinquin ocinquin uci edu
MFC after: 3 days
not disable it and it is even harmful as hselasky found out. Historically,
this code was originated from (OLDCARD) CardBus driver and later leaked into
PCI driver when CardBus was newbus'ified and refactored with PCI driver.
However, it is not really necessary even for CardBus.
Reviewed by: hselasky, imp, jhb
bridges. Rather than blindly enabling the windows on all of them, only
enable the window when an MSI interrupt is enabled for a device behind
the bridge, similar to what already happens for HT PCI-PCI bridges.
To implement this, each x86 Host-PCI bridge driver has to be able to
locate it's actual backing device on bus 0. For ACPI, use the _ADR
method to find the slot and function of the device. For the non-ACPI
case, the legacy(4) driver already scans bus 0 looking for Host-PCI
bridge devices. Now it saves the slot and function of each bridge that
it finds as ivars that the Host-PCI bridge driver can then use in its
pcib_map_msi() method.
This fixes machines where non-MSI interrupts were broken by the previous
round of HT MSI changes.
Tested by: bapt
MFC after: 1 week
Don't disable BARs on any PCI display devices, because doing that can
sometimes cause the main memory bus to stop working, causing all
memory reads to return nothing but 0xFFFFFFFF, even though the memory
location was previously written. After a while a privileged
instruction fault will appear and then nothing more can be debugged.
The reason for this behaviour is unknown.
MFC after: 1 week
For example, some BIOS for AMD SB600 south bridge may map HPET MMIO base
address as a memory BAR for SMBus controller depending on a PM register
configuration. Before r231161 (and r232086, subsequent MFC to stable/9),
it was not fatal but hpet(4) just failed to attach. Since we probe and
attach HPET earlier than PCI devices now, it caused unfortunate hard lockup.
With this patch, it does not hang any more and HPET works at the same time.
Clean up some style nits while I am in the neighborhood.
PR: kern/165647
Reviewed by: jhb
MFC after: 3 days
Expand pci_save_state and pci_restore_state to save more of
the config state for PCI Express and PCI-X devices. Various
writable control registers are present in PCI Express that
can potentially be lost over suspend/resume cycle.
This change is modeled after similar functionality in Linux.
Reviewed by: wlosh,jhb
MFC after: 1 month
all for platforms that only have 32-bit bus addresses. Second, remove
the 'tag_valid' flag from the softc. Instead, if we don't create a
tag in pci_attach_common(), just cache the value of our parent's tag
so that we always have a valid tag to return.
- pci_find_extcap() is repurposed to be used for fetching PCI-express
extended capabilities (PCIZ_* constants in <dev/pci/pcireg.h>).
- pci_find_htcap() can be used to locate a specific HyperTransport
capability (PCIM_HTCAP_* constants in <dev/pci/pcireg.h>).
- Cache the starting location of the PCI-express capability for PCI-express
devices in PCI device ivars.
The tag enforces a single restriction that all DMA transactions must not
cross a 4GB boundary. Note that while this restriction technically only
applies to PCI-express, this change applies it to all PCI devices as it
is simpler to implement that way and errs on the side of caution.
- Add a softc structure for PCI bus devices to hold the bus_dma tag and
a new pci_attach_common() routine that performs actions common to the
attach phase of all PCI bus drivers. Right now this only consists of
a bootverbose printf and the allocate of a bus_dma tag if necessary.
- Adjust all PCI bus drivers to allocate a PCI bus softc and to call
pci_attach_common() from their attach routines.
MFC after: 2 weeks
pci_cfg_save() and pci_cfg_restore() for device drivers to use when
saving and restoring state (e.g. to handle device-specific resets).
Reviewed by: imp
MFC after: 2 weeks
through by VMware so blacklist their PCI-PCI bridge for MSI/MSI-X here.
Note that besides currently there not being a quirk type that disables
MSI-X only and there's no evidence that MSI doesn't work with the VMware
pass-through, it's really questionable whether MSI generally works in
that setup as VMware only mention three know working devices [1, p. 4].
Also not that this quirk entry currently doesn't affect the devices
emulated by VMware in any way as these don't claim support MSI/MSI-X to
begin with. [2]
While at it, make the PCI quirk table const and static.
- Remove some duplicated empty lines.
- Use DEVMETHOD_END.
PR: 163812, http://forums.freebsd.org/showthread.php?t=27899 [2]
Reviewed by: jhb
MFC after: 3 days
pci_get_vpd_readonly_method(). Previously the loop was always running
to completion and falling through to failing with ENXIO.
PR: kern/164313
Submitted by: Chuck Tuffli chuck tuffli net
MFC after: 1 week
bridge is blacklisted. In that case just return from pci_alloc_msix_method(),
otherwise we continue without a single MSI-X resource, causing subsequent
attempts to use the seemingly available resource to fail or when booting
verbose a NULL-pointer dereference of rle->start when trying to print the
IRQ in pci_alloc_msix_method().
Reviewed by: jhb
MFC after: 1 week
the recent changes to track BAR state explicitly. The code would now
attempt to add the same BAR twice in this case. Instead, change this so
that it recognizes this case and only adds it once and do not delete the
BAR outright after parsing the CIS.
Tested by: bschmidt
driver would verify that requests for child devices were confined to any
existing I/O windows, but the driver relied on the firmware to initialize
the windows and would never grow the windows for new requests. Now the
driver actively manages the I/O windows.
This is implemented by allocating a bus resource for each I/O window from
the parent PCI bus and suballocating that resource to child devices. The
suballocations are managed by creating an rman for each I/O window. The
suballocated resources are mapped by passing the bus_activate_resource()
call up to the parent PCI bus. Windows are grown when needed by using
bus_adjust_resource() to adjust the resource allocated from the parent PCI
bus. If the adjust request succeeds, the window is adjusted and the
suballocation request for the child device is retried.
When growing a window, the rman_first_free_region() and
rman_last_free_region() routines are used to determine if the front or
end of the existing I/O window is free. From using that, the smallest
ranges that need to be added to either the front or back of the window
are computed. The driver will first try to grow the window in whichever
direction requires the smallest growth first followed by the other
direction if that fails.
Subtractive bridges will first attempt to satisfy requests for child
resources from I/O windows (including attempts to grow the windows). If
that fails, the request is passed up to the parent PCI bus directly
however.
The PCI-PCI bridge driver will try to use firmware-assigned ranges for
child BARs first and only allocate a "fresh" range if that specific range
cannot be accommodated in the I/O window. This allows systems where the
firmware assigns resources during boot but later wipes the I/O windows
(some ACPI BIOSen are known to do this) to "rediscover" the original I/O
window ranges.
The ACPI Host-PCI bridge driver has been adjusted to correctly honor
hw.acpi.host_mem_start and the I/O port equivalent when a PCI-PCI bridge
makes a wildcard request for an I/O window range.
The new PCI-PCI bridge driver is only enabled if the NEW_PCIB kernel option
is enabled. This is a transition aide to allow platforms that do not
yet support bus_activate_resource() and bus_adjust_resource() in their
Host-PCI bridge drivers (and possibly other drivers as needed) to use the
old driver for now. Once all platforms support the new driver, the
kernel option and old driver will be removed.
PR: kern/143874 kern/149306
Tested by: mav
allocated, not the maximum number of messages the device supports. The
spec only requires the former, and I believe I implemented the latter due
to misunderstanding an e-mail. In particular, this fixes an issue where
having several devices that all support 16 messages can run out of
IDT vectors on x86 even though the driver only uses a single message.
Submitted by: Bret Ketchum bcketchum of gmail
MFC after: 1 week
bus driver will now remember the size of a BAR obtained during the initial
bus scan and use that size when doing lazy resource allocation rather than
resizing the BAR. The bus driver will now also report unallocated BARs to
userland for display by 'pciconf -lb'. Psuedo-resources that are not BARs
(such as the implicit I/O port resources for master/slave ATA controllers)
will no longer be listed as BARs in 'pciconf -lb'. During resume, BARs are
restored from their new saved state instead of having the raw registers
saved and restored across resume. This also fixes restoring BARs at
unusual loactions if said BAR has been allocated by a driver.
Add a constant for the offset of the ROM BIOS BAR in PCI-PCI bridges and
properly handle ROM BIOS BARs in PCI-PCI bridges. The PCI bus now also
properly handles the lack of a ROM BIOS BAR in a PCI-Cardbus bridge.
Tested by: jkim
"extended capabilities" to refer to the new set of capability structures
starting at offset 0x100 in config space for PCI-express devices. For now
both function names will still work. I will merge this to older branches
to ease driver portability, but 9.0 will ship with a new pci_find_extcap()
function that locates extended capabilities instead.
Reviewed by: imp
MFC after: 1 week
chipsets that do not have an HT slave at 0:0:0:0. The Linux quirk is
actually specific to Nvidia chipsets and the check I had added was in
the wrong place.
Prodded by: nathanw
- Always enable the HyperTransport MSI mapping window for HyperTransport
to PCI bridges (these show up as HyperTransport slave devices).
The mapping windows in PCI-PCI bridges are enabled by existing code
in the PCI-PCI bridge driver as MSI requests propagate up the device
tree, but Host-PCI bridges don't really show up in that tree.
- If the PCI device at domain 0 bus 0 slot 0 function 0 is not a
HyperTransport device, then blacklist MSI on any other HT devices in
the system. Linux has a similar quirk.
PR: kern/155442
Tested by: Zack Dannar zdannar of gmail
MFC after: 1 week
causing the size calculation to be truncated to the size of an int
(32-bits on all current architectures).
Submitted by: Anish akgupt3 of gmail
MFC after: 1 week
within the first 4 bytes of the EHCI memory space. For controllers that
use big-endian MMIO, reading them with 1- and 2-byte reads would then
return the wrong values. Instead, read the combined register with a 4-byte
read and mask out the interesting quantities.
PCI-express or PCI-X capabilities if we are running in a virtual machine.
- Whitelist the Intel 82440 chipset used by QEMU.
Tested by: jfv
MFC after: 1 week
ignore BARs that are invalid due to having a size of zero, not to ignore
BARs with an existing base of zero. While here, reorganize the code
slightly to make the intent clearer.
Reported by: avg
MFC after: 1 week
Specification Rev. 1.2. Rename pp_pcmcsr field of PM capabilities to pp_bse
to avoid further confusions and adjust some comments accordingly. The real
PMCSR (Power Management Control/Status Register) is PCIR_POWER_STATUS and
it is actually BSE (PCI-to-PCI Bridge Support Extensions) register.
