IF non-existend gateway was specified, the code responsible for calculating
an updated nexthop group, returned the same already-used nexthop group.
After the route table update, the operation result contained the same
old & new nexthop groups. Thus, the code responsible for decomposing
the notification to the list of simple nexthop-level notifications,
was not able to find any differences. As a result, it hasn't updated any
of the "simple" notification fields, resulting in empty rtentry pointer.
This empty pointer was the direct reason of a panic.
Fix the problem by returning ESRCH when the new nexthop group is the same
as the old one after applying gateway filter.
Reported by: Michael <michael.adm at gmail.com>
PR: 255665
MFC after: 3 days
This allows us to kill states created from a rule with route-to/reply-to
set. This is particularly useful in multi-wan setups, where one of the
WAN links goes down.
Submitted by: Steven Brown
Obtained from: https://github.com/pfsense/FreeBSD-src/pull/11/
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30058
Introduce an nvlist based alternative to DIOCKILLSTATES.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30054
When showing the states, in very verbose mode, also display the gateway
(i.e. the target for route-to/reply-to).
Submitted by: Steven Brown
Reviewed by: donner
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30051
div_output_outbound() and div_output_inbound() relied on the caller to
free the mbuf if an error occurred. However, this is contrary to the
semantics of their callees, ip_output(), ip6_output() and
netisr_queue_src(), which always consume the mbuf. So, if one of these
functions returned an error, that would get propagated up to
div_output(), resulting in a double free.
Fix the problem by making div_output_outbound() and div_output_inbound()
responsible for freeing the mbuf in all cases.
Reported by: Michael Schmiedgen <schmiedgen@gmx.net>
Tested by: Michael Schmiedgen
Reviewed by: donner
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30129
When unwinding the stack, we may encounter a stack frame in a poisoned
region of the stack, triggering a false positive.
Reviewed by: andrew, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30126
KASAN does not insert redzones around global variables and so is not
susceptible to the problem that led to us disabling ASAN for linker set
elements in the first place (see commit fe3d8086fb).
Reviewed by: andrew, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30126
The coldsync port was removed in 2012. The last stable release of
coldsync was issued in 2002. Let's get rid of it.
PR: 255051
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30100
issues.
A) Not enough hdrlen was being calculated when a UDP tunnel is
in place.
and
B) Not enough memory is allocated in racks fsb. We need to
overbook the fsb to include a udphdr just in case.
Submitted by: Peter Lei
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D30157
This is OBJT_SWAP pager, specialized for tmpfs. Right now, both swap pager
and generic vm code have to explicitly handle swap objects which are tmpfs
vnode v_object, in the special ways. Replace (almost) all such places with
proper methods.
Since VM still needs a notion of the 'swap object', regardless of its
use, add yet another type-classification flag OBJ_SWAP. Set it in
vm_object_allocate() where other type-class flags are set.
This change almost completely eliminates the knowledge of tmpfs from VM,
and opens a way to make OBJT_SWAP_TMPFS loadable from tmpfs.ko.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
Put each type into dedicated line, which makes addition of new
types cleaner.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
Allow vp_heldp argument to be NULL, in which case the returned vnode
is not held for tmpfs swap objects.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
Makes the code in vm_object collapse/page_remove cleaner
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
This eliminates the staircase of conditions in vm_map_entry_set_vnode_text().
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
specialized for swap and vnode pagers, and used to implement
vm_object_set_writeable_dirty().
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
Fill lines with the function definitions.
Use local var to shorten repeated extra-long expressions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
'show adapter' now shows PCIe width and speed, IOC Speed, and the
temperature of the controller.
A new command, 'set ncq', is added.
It enables or disables SATA NCQ in the NVRAM of the card.
Its current setting is added to 'show adapter' as well.
PR: 254841
MFC after: 2 weeks
Relnotes: perhaps
It is needed to invalidate cache in case of inode space removal
to avoid situation, when extents cache returns not exist extent.
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29931
It is possible to walk thru inode extents if EXT2FS_PRINT_EXTENTS
macro is defined. The extents headers magics and physical blocks
ranges are checked during extents walk.
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29932
I saw a situation where the driver set CAM_AUTOSNS_VALID on a failed ccb
even though SRB_STATUS_AUTOSENSE_VALID was not set in the status.
The actual sense data remained all zeros.
The problem seems to be that create_storvsc_request() always sets
hv_storvsc_request::sense_info_len, so checking for sense_info_len != 0
is not enough to determine if any auto-sense data is actually available.
Reviewed by: whu, imp
MFC after: 2 weeks
Sponsored by: CyberSecure
Differential Revision: https://reviews.freebsd.org/D30124
The dev field is placed into the inode structure.
The major/minor numbers conversion to/from linux compatile
format happen during on-disk inodes writing/reading.
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29930
The birthtime field of struct vattr does not checked
for VNOVAL in case of ext2_setattr() and produce incorrect
inode birthtime values.
Found using pjdfstest:
pjdfstest/tests/utimensat/03.t
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29929
Virtio modern has the common data organized in little endian, but
on powerpc64 BE it was reading and writing in the wrong endian.
Submitted by: Leonardo Bianconi <leonardo.bianconi@eldorado.org.br>
Reviewed by: bryanv, alfredo
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28947
Only LS1046A and LS1028A require the base clk to be divided by 2.
Implement that by moving the divider to a SoC specific data.
This commit fixes base clk setup for the entire SoC family,
including the already suported LS2160A.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30120
The new driver provides probe and attach functions for the NXP LS1028A
clockgen and passes configuration information to QorIQ clockgen class.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30125
When _ISOC11_SOURCES is defined for glibc at the same time
__POSIX_C_SOURCE is defined, it extends the __POSIX_C_SOURCE definition
by exaclty what C11 adds to the spec for each system header. We follow
both OpenBSD's and glibc's convention by also C11 or higher compliation
mode is selected.
The Open Group is working on issuing a new version of the POSIX standard
that will realign the standard from C99 to a newer version of C. This
commit is a stop-gap measure for greater compatibility until that
environment has been standardized.
Reviewed by: brooks@, arichards@, Olivier Certne
(comments tweaked before commit)
PR: 255290
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29902
Report status from dword0 for passthru commands. Many commands report
some status or information here, so reporting it can help know what's
going on.
Sponsored by: Netflix
The source to be used should be sqlite-autoconf-3350500.tar.gz
instead of the souce sqlite-amalgamation-3350500.zip used by
the port.
This reverts commit eccd5a4d39.
According to comments in the Makefile, to make pxeboot work we need to
have crt0.o first. This is needed because the simplified loader in
pxeboot assumes that the startup code is at offset 0 in this binary. In
normal booting, the start address can be obtained from headers of the
binary, but since pxeboot encodes this as a pure binary, it has no way
of knowing where that is and assumes 0. Added comments to that effect
in the Makefile.
We've done this by adding it to OBJS before all the other .o's are
added. However, there's a problem. This also adds it to the CLEANFILES
variable, which causes it to be removed from multiple places. The
dependencies may also cause it to be re-built at a time that's after
boot2 is built. This causes installs to fail because at install time
boot2 is considered to be out of date and the programs to rebuild it are
no longer in the path.
Cope with this problem by just adding it to LDFLAGS instead.
Glanced at by: kevans ("I thought that went in ages ago")
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28876
