While <sys/sysctl.h> includes <sys/queue.h> unconditionally, it is only
actually used in code which is conditional on _KERNEL. Make the #include
itself conditional as well, and fix userland code that uses <sys/queue.h>
for other purposes but relied on <sys/sysctl.h> to bring it in.
MFC after: 1 week
ioctl frontend ports.
This revision introduces two changes to CTL:
- Changes the way options are passed to CTL_LUN_REQ and CTL_PORT_REQ ioctls.
Removes ctl_be_arg structure and associated logic and replaces it with
nv(3)-based logic for passing in and out arguments.
- Allows creating multiple ioctl frontend ports using either ctladm(8) or
ctld(8).
New frontend ports are represented by /dev/cam/ctl<pp>.<vp> nodes, eg /dev/cam/ctl5.3.
Those device nodes respond only to CTL_IO ioctl.
New command-line options for ctladm:
# creates new ioctl frontend port with using free pp and vp=0
ctladm port -c
# creates new ioctl frontend port with pp=10 and vp=0
ctladm port -c -O pp=10
# creates new ioctl frontend port with pp=11 and vp=12
ctladm port -c -O pp=11 -O vp=12
# removes port with number 4 (it's a "targ_port" number, not pp number)
ctladm port -r -p 4
New syntax for ctl.conf:
target ... {
port ioctl/<pp>
...
}
target ... {
port ioctl/<pp>/<vp>
...
Note: Most of this work was made by jceel@, thank you.
Submitted by: jceel
Reworked by: myself
Reviewed by: mav (earlier versions and recently during the rework)
Obtained from: FreeNAS and TrueOS
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D9299
The --device and --part command line options were planned for Linux
compatibility mode. However, that mode will never happen, so remove
them as last vestiges of a false start.
Submitted by: Vlad Movchan
Print the boot variables in the order in the BootOrder variable, if it
exists, and then in verbose mode print any unreferneced BootXXXX
variables. If BootOrder isn't set, fall back to printing all the
variables.
Sponsored by: Netflix
by doing most of the work in a new function prison_add_vfs in kern_jail.c
Now a jail-enabled filesystem need only mark itself with VFCF_JAIL, and
the rest is taken care of. This includes adding a jail parameter like
allow.mount.foofs, and a sysctl like security.jail.mount_foofs_allowed.
Both of these used to be a static list of known filesystems, with
predefined permission bits.
Reviewed by: kib
Differential Revision: D14681
The prior code only allowed multiples of 32 for the
numbers of columns. Remove this restriction to allow
a forthcoming UEFI firmware update to allow arbitrary
x,y resolutions.
(the code for handling rows already supported non mult-32 values)
Reviewed by: Leon Dang (original author)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15274
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
This commit adds a new debug server to bhyve. Unlike the existing -g
option which provides an efficient connection to a debug server
running in the guest OS, this debug server permits inspection and
control of the guest from within the hypervisor itself without
requiring any cooperation from the guest. It is similar to the debug
server provided by qemu.
To avoid conflicting with the existing -g option, a new -G option has
been added that accepts a TCP port. An IPv4 socket is bound to this
port and listens for connections from debuggers. In addition, if the
port begins with the character 'w', the hypervisor will pause the
guest at the first instruction until a debugger attaches and
explicitly continues the guest. Note that only a single debugger can
attach to a guest at a time.
Virtual CPUs are exposed to the remote debugger as threads. General
purpose register values can be read for each virtual CPU. Other
registers cannot currently be read, and no register values can be
changed by the debugger.
The remote debugger can read guest memory but not write to guest
memory. To facilitate source-level debugging of the guest, memory
addresses from the debugger are treated as virtual addresses (rather
than physical addresses) and are resolved to a physical address using
the active virtual address translation of the current virtual CPU.
Memory reads should honor memory mapped I/O regions, though the debug
server does not attempt to honor any alignment or size constraints
when accessing MMIO.
The debug server provides limited support for controlling the guest.
The guest is suspended when a debugger is attached and resumes when a
debugger detaches. A debugger can suspend a guest by sending a Ctrl-C
request (e.g. via Ctrl-C in GDB). A debugger can also continue a
suspended guest while remaining attached. Breakpoints are not yet
supported. Single stepping is supported on Intel CPUs that support
MTRAP VM exits, but is not available on other systems.
While the current debug server has limited functionality, it should
at least be usable for basic debugging now. It is also a useful
checkpoint to serve as a base for adding additional features.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D15022
pwd_mkdb has emitted v4 password database records since 2003 (r113596)
in addition to v3, and as of r283981 by default it emitted only v4.
As described in r283981, retire the -l legacy option.
The -B and -L options were originally added to set the endianness of v3
records emitted by pwd_mkdb, but they also set the db hash endiannes and
so have been retained temporarily.
Announced on the FreeBSD-Current and FreeBSD-Stable lists. In stable/11
the man page contains a deprecation notice, and pwd_mkdb will emit a
deprecation notice if the -l option is specified.
Reviewed by: delphij, lidl, rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15144
User-visible changes:
"-u" is added to to list of command line options supported by bthidd.
Use it to enable evdev support. uinput and evdev modules should be
kld-loaded or compiled into the kernel in that case.
bthidd_evdev_support rc.conf variable is added to control enabling of
evdev support in bthidd startup script. Possible values are: "YES", "NO",
"AUTO"(default). Setting bthidd_evdev_support to "AUTO" inserts "-u" option
if kernel is compiled with EVDEV_SUPPORT option enabled.
Support for consumer HID usage page keyboard events is implemented. Most of
them are available only through evdev protocol.
kern.evdev.rcpt_mask sysctl is checked, so "sysctl kern.evdev.rcpt_mask=12"
should be executed if EVDEV_SUPPORT is compiled into kernel.
It is recommended to regenerate bthidd.conf entries with bthidcontrol(8)
"Query" command to set user-friendly names of bluetooth devices.
Reviewed by: emax, gonzo, wblock (docs), bcr (docs, early version)
Differential Revision: https://reviews.freebsd.org/D13456
Extend bthidd.conf format to store name of remote Bluetooth HID devices and
implement querying of this information with bthidcontrol(8) "Query" command.
Reviewed by: emax
Differential Revision: https://reviews.freebsd.org/D13456
become redundant after documenting all the subcommands, and switches
to the new syntax, without the '-d'.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
For cross-architecture reproducibility. The db(3) functions work with
hashes of either endianness, and the current (v4) version password db
entries already store integers in network order. Do so with the hash as
well so that identical password databases can be created on big- and
little-endian hosts.
The -B and -L flags exist to set the endianness for legacy (v3) entries
when the -l flag is used, and they will still control hash endianness
(at least until the backwards compatibility infrastructure is removed).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
- cd9660 relies on an #include "iso.h" but does not build any .c files
out of source, so remove reach-over .PATH
- ffs does not rely on any sys/ headers, so remove -I from CFLAGS.
- ffs_tables from sys/ is used by ffs; move the SRCS entry from the top-
level Makefile to ffs' Makefile.inc.
Sponsored by: The FreeBSD Foundation
r283981 switched pwd_mkdb to emit only v4 database entries by default,
and introduced a -l (legacy) option emit v3 entries in addition. The
commit message claims that legacy support will be removed in 12.0, so
emit a warning now if it is used.
Previously the code only warned about the condition and then happily
proceeded to use the too large value resulting in the array
out-of-bounds access.
Obtained from: Panzura (Chuanbo Zheng)
MFC after: 10 days
Sponsored by: Panzura
supervised program. The existing -r option has a hard-coded delay of one
second. This change adds a -R option which takes a delay in seconds. This
can be used to prevent log spam and rapid restarts, similar to init(8)'s
behavior of adding a delay between rapid restarts when it's supervising a
program.
- Move all of the code responsible for transmitting log messages into a
separate function, fprintlog_write().
- Instead of manually modifying a list of iovecs, add a structure
iovlist with some helper functions.
- Alter the F_FORW (UDP message forwarding) case to also use iovecs like
the other cases. Use sendmsg() instead of sendto().
- In the case of F_FORW, truncate the message to a size dependent on the
address family (AF_INET, AF_INET6), as proposed by RFC 5426.
- Move all traditional message formatting into fprintlog_bsd(). Get rid
of some of the string copying and snprintf()'ing. Simply emit more
iovecs to get the job done.
- Increase ttymsg()'s limit of 7 iovecs to 32. Add a definition for this
limit, so it can be reused by iovlist.
- Add fprintlog_rfc5424() to emit RFC 5424 formatted log entries.
- Add a "-O" command line option to enable RFC 5424 formatting. It would
have been nicer if we supported "-o rfc5424", just like on NetBSD.
Unfortunately, the "-o" flag is already used for a different purpose
on FreeBSD.
- Don't truncate hostnames in the RFC 5424 case, as suggested by that
specific RFC.
For people interested in using this, this feature can be enabled by
adding the following line to /etc/rc.conf:
syslogd_flags="-s -O rfc5424"
Differential Revision: https://reviews.freebsd.org/D15011
COP allows fine-grained control on whether to offload a TCP connection
using t4_tom, and what settings to apply to a connection selected for
offload. t4_tom must still be loaded and IFCAP_TOE must still be
enabled for full TCP offload to take place on an interface. The
difference is that IFCAP_TOE used to be the only knob and would enable
TOE for all new connections on the inteface, but now the driver will
also consult the COP, if any, before offloading to the hardware TOE.
A policy is a plain text file with any number of rules, one per line.
Each rule has a "match" part consisting of a socket-type (L = listen,
A = active open, P = passive open, D = don't care) and a pcap-filter(7)
expression, and a "settings" part that specifies whether to offload the
connection or not and the parameters to use if so. The general format
of a rule is: [socket-type] expr => settings
Example. See cxgbetool(8) for more information.
[L] ip && port http => offload
[L] port 443 => !offload
[L] port ssh => offload
[P] src net 192.168/16 && dst port ssh => offload !nagle !timestamp cong newreno
[P] dst port ssh => offload !nagle ecn cong tahoe
[P] dst port http => offload
[A] dst port 443 => offload tls
[A] dst net 192.168/16 => offload !timestamp cong highspeed
The driver processes the rules for each new listen, active open, or
passive open and stops at the first match. There is an implicit rule at
the end of every policy that prohibits offload when no rule in the
policy matches:
[D] all => !offload
This is a reworked and expanded version of a patch submitted by
Krishnamraju Eraparaju @ Chelsio.
Sponsored by: Chelsio Communications
By popular demand, pkg now walks thought the arguments passed and
if it finds -y or --yes it does accept those as equivalent of
ASSUME_ALWAYS_YES env var.
Requested by: many
MFC after: 1 week
Directory mtime will only change if a file is added or removed, not
modified. For /var/cron/tabs, this is fine because of how crontab(1) manages
it using temp files so all crontab(1) changes will trigger a reload of the
database.
For /etc/cron.d and /usr/local/etc/cron.d, this is not necessarily the case.
Instead of checking their mtime, we should descend into them and check mtime
on all jobs also.
Reported by: des
Reviewed by: bapt
MFC after: 1 week
from userland without the need to use sysctls, it allows the old
sysctls to continue to function, but deprecates them at
FreeBSD_version 1200060 (Relnotes for deprecate).
The command line of bhyve is maintained in a backwards compatible way.
The API of libvmmapi is maintained in a backwards compatible way.
The sysctl's are maintained in a backwards compatible way.
Added command option looks like:
bhyve -c [[cpus=]n][,sockets=n][,cores=n][,threads=n][,maxcpus=n]
The optional parts can be specified in any order, but only a single
integer invokes the backwards compatible parse. [,maxcpus=n] is
hidden by #ifdef until kernel support is added, though the api
is put in place.
bhyvectl --get-cpu-topology option added.
Reviewed by: grehan (maintainer, earlier version),
Reviewed by: bcr (manpages)
Approved by: bde (mentor), phk (mentor)
Tested by: Oleg Ginzburg <olevole@olevole.ru> (cbsd)
MFC after: 1 week
Relnotes: Y
Differential Revision: https://reviews.freebsd.org/D9930
Now that all of parsemsg() parses both RFC 3164 and 5424 messages and
hands them to logmsg(), alter the latter to properly forward all RFC
5424 message attributes to fprintlog(). While there, make some minor
cleanups to this code:
- Instead of extending the existing code that compares hostnames and
message bodies for deduplication, print all of the relevant message
fields into a single string that we can compare ('saved').
- No longer let the behaviour of fprintflog() depend on whether
'msg == NULL' to print repetition messages, Simply decompose this
function into fprintlog_first() and fprintlog_successive(). This
makes the interpretation of function arguments less magical and also
allows us to get consistent behaviour across RFC 3164 and 5424 when
adding support for the RFC 5424 output format.
- As RFC 5424 syslog messages have a dedicated application name field,
alter the repetition messages to be printed on behalf of syslogd on
the current system. Change these messages to use the local hostname,
so that it's obvious which syslogd instance detected the repetition.
Remove f_prevhost, as it has now become unnecessary.
- Remove a useless strdup(). Deconsting the message string is safe in
this specific case.
Syslogd currently uses the RFC 3164 format for its log messages.One
limitation of RFC 3164 is that it cannot be used to log entries with
sub-second precision timestamps. One of our users has expressed a desire
for doing this for doing some basic performance measurements.
This change attempts to make a first cut at switching to RFC 5424 based
logging. The first step is to alter syslogd's input path to properly
parse such messages. It alters the logmsg() prototype to match the
fields of RFC 5424. The parsemsg() function is extended to parse both
RFC 3164 and 5424 messages and call into logmsg() accordingly.
Additional changes include:
- Introducing proper parsing of timestamps, so that they can be printed
in any desired output format. This means we need to infer the year and
timezone for RFC 3164 timestamps.
- Removing ISKERNEL. This can now be realised by simply providing an
APP-NAME (== "kernel").
- Extending RFC 3164 parsing to trim off the TAG prefix and using that
to derive APP-NAME and PROCID.
- Increase MAXLINE. RFC 5424 mentions we should support 2k messages.
Differential Revision: https://reviews.freebsd.org/D14926
When I implemented my EFI support I failed to check if the upstream version
of makefs in NetBSD had done the same. Override my version with theirs to
make it easier to stay in sync with them in the future.
Reviewed by: imp, mav
Obtained from: NetBSD
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14913
r222319 in newfs raised the default blocksize for UFS/FFS filesystems
from 16K to 32K and the default fragment size from 2K to 4K, with a
rationale that most disks were now running with 4K sectors.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
