Commit Graph

1721 Commits

Author SHA1 Message Date
Mitsuru IWASAKI
858a52f464 Import ACPI Dock Station support. Note that this is still very young.
Additional detach implementaions (or maybe improvement) for other
deivce drivers is required.

Reviewed by:	njl, imp
MFC after:	1 week
2006-04-15 12:31:34 +00:00
Paul Saab
6caf734fd9 Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708)
PCI/PCIe Gigabit Ethernet adapeter.

Submitted by:	David Christensen
2006-04-10 19:55:23 +00:00
Sam Leffler
a585a9a1bc o add opt_ath.h enable tweaking various config parameters for the driver
without modifying the source code
o default debug msgs and diag support to off

MFC after:	3 days
2006-04-03 18:14:02 +00:00
Marcel Moolenaar
a75b305ac6 Build the scc(4) module with EBus and SBus attachments for sparc64
only and build the scc(4) module with MacIO attachment for powerpc.
2006-04-01 04:54:47 +00:00
Marcel Moolenaar
c9e0c5b9c4 Build uart(4) on PowerPC. 2006-03-31 01:50:23 +00:00
Marcel Moolenaar
af2e25a6d2 o Add scc(4) to the build.
o  Add the scc(4) manpage to the build.
o  Update the uart(4) manpage to account for scc(4).
o  Update the uart(4) module build to include support for scc(4).
2006-03-30 18:39:24 +00:00
Marcel Moolenaar
6174e6ed12 Add scc(4), a driver for serial communications controllers. These
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an umbrella driver that delegates the control over each channel
and mode to a subordinate driver (like uart(4)).
The scc(4) driver supports the Siemens SAB 82532 and the Zilog
Z8530 and replaces puc(4) for these devices.
2006-03-30 18:33:22 +00:00
Scott Long
7f631a410c Hook the MFI driver up to the build. 2006-03-29 09:57:22 +00:00
Scott Long
2e21a3ef7e Add a driver for the new LSI MegaRAID SAS controller family. The 'MFI' name
is derived from the phrase 'MegaRAID Firmware Interface' used by LSI.  This
driver provides a block interface to logical disks on the card and a minimal
management device.  It is MPSAFE, INTR_FAST, and 64-bit capable.

Thanks to Dell for providing hardware to test with and IronPort for
sponsoring the work.

Sponsored by: Dell, Ironport
MFC After: 3 days
2006-03-25 06:14:32 +00:00
Ruslan Ermilov
cea557add0 Extend coverage of the MK_IPX build option to the following:
- <netipx> headers [1]
- IPX library (libipx)
- IPX support in ifconfig(8)
- IPXrouted(8)
- new MK_NCP option

New MK_NCP build option controls:

- <netncp> and <fs/nwfs> headers
- NCP library (libncp)
- ncplist(1) and ncplogin(1)
- mount_nwfs(8)
- ncp and nwfs kernel modules

User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.

[1] <netsmb/netbios.h> unconditionally uses <netipx> headers
so they are still installed.  This needs to be dealt with.
2006-03-20 14:24:58 +00:00
Alexander Leidinger
5c8919adf4 Get rid of the need of COMPAT_43 in the linuxolator.
Submitted by:	Divacky Roman <xdivac02@stud.fit.vutbr.cz>
Obtained from:	DragonFly (some parts)
2006-03-18 18:20:17 +00:00
Ruslan Ermilov
e1fe3dba5c Reimplementation of world/kernel build options. For details, see:
http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html

The src.conf(5) manpage is to follow in a few days.

Brought to you by:	imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
Yoshihiro Takahashi
f28f001e8d Don't build the ipw and iwi on pc98. 2006-03-17 13:06:19 +00:00
Ruslan Ermilov
d1e9def254 NO_MAN is not needed here. 2006-03-16 15:18:17 +00:00
Damien Bergamini
b4c31113a1 build ipw(4) and iwi(4) modules on i386 and amd64 only. 2006-03-15 20:58:44 +00:00
Damien Bergamini
9a9d0e6ec3 remove depedancy with vnode_if.h.
it is no longer needed.
2006-03-12 19:06:06 +00:00
Søren Schmidt
3b9c3f561c Remove debug flag.
Spotted by: ru@
2006-03-11 08:42:08 +00:00
Søren Schmidt
bf86d4677b Add atausb module 2006-03-10 19:15:20 +00:00
Yaroslav Tykhiy
10dbb44a9f The pf' and pflog' sources do not depend on DEV_PF or DEV_PFLOG,
which is normal for own files of a device driver.

DEV_FOO should be used if an unrelated kernel file needs to know of
the `foo' driver's static presence.  Obviously, module source files
should never use DEV_*.
2006-03-09 15:48:45 +00:00
Yaroslav Tykhiy
8d96e45531 Retire NETSMBCRYPTO as a kernel option and make its functionality
enabled by default in NETSMB and smbfs.ko.

With the most of modern SMB providers requiring encryption by
default, there is little sense left in keeping the crypto part
of NETSMB optional at the build time.

This will also return smbfs.ko to its former properties users
are rather accustomed to.

Discussed with:		freebsd-stable, re (scottl)
Not objected by:	bp, tjr (silence)
MFC after:		5 days
2006-03-05 22:52:17 +00:00
Damien Bergamini
c128b2d129 Add support for the second (RT2561/RT2561S) and third (RT2661 MIMO XR)
generations of 802.11abg chipsets from Ralink Technology.
Get rid of the pccard front-end while I'm here since all adapters are
cardbus ones.
2006-03-05 20:38:55 +00:00
Yaroslav Tykhiy
375ce6798f Take the functionality contained in the former "options TDFX_LINUX"
into a separate module.  Accordingly, convert the option into a device
named similarly.

Note for MFC: Perhaps the option should stay in RELENG_6 for POLA reasons.

Suggested by:	scottl
Reviewed by:	cokane
MFC after:	5 days
2006-03-03 21:37:38 +00:00
Yaroslav Tykhiy
9d5eafc196 Fix the decaying MODULES_WITH_WORLD again by adding a missing opt_*.h to SRCS. 2006-03-03 18:42:09 +00:00
Maksim Yevmenkin
b569776d07 Provide ability to disable kbdmux(4) with the hint.kbdmux.0.disabled="1" hint.
Document hint in the kbdmux(4) man page.

Requested by:	scottl
MFC after:	1 day
2006-03-01 18:34:48 +00:00
Wojciech A. Koszek
51b4ccb464 This patch fixes a problem, which exists if you have IPSEC in your kernel
and want to have crypto support loaded as KLD. By moving zlib to separate
module and adding MODULE_DEPEND directives, it is possible to use such
configuration without complication. Otherwise, since IPSEC is linked with
zlib (just like crypto.ko) you'll get following error:

	interface zlib.1 already present in the KLD 'kernel'!

Approved by:	cognet (mentor)
2006-02-27 16:56:22 +00:00
Wojciech A. Koszek
cf62a08f65 Connect zlib to the build.
Approved by:	cognet (mentor)
2006-02-27 16:50:51 +00:00
Yaroslav Tykhiy
82967ff0b8 CODA_COMPAT_5 may not be defined unconditionally in the coda5 module.
Otherwise a kernel build would break in the coda5 module if the main
kernel conf file enabled CODA_COMPAT_5, too.  Redefined symbols are
strictly disallowed by -Werror.

To overcome this issue, introduce a different symbol indicating coda5
build, CODA5_MODULE, and translate it to CODA_COMPAT_5 appropriately
in /sys/coda/coda.h.

MFC after:	3 days
2006-02-27 12:04:13 +00:00
Warner Losh
acb2d038a7 Move de from pci to dev/de 2006-02-26 17:51:22 +00:00
Yaroslav Tykhiy
56c559ca66 Move the hard-coded ETHER_* options to where they belong --
inside !if defined(KERNBUILDDIR).

Utilize the fact the module will support all frames by default --
it needs no ETHER_* options unless some frames need to be disabled.

Fix the comment respectively.

Don't forget to create fake opt_ef.h if no ETHER_* are set.

MFC after:	3 days
2006-02-24 12:27:09 +00:00
Marcel Moolenaar
9465d7f13a Remove dev/uart/uart_if.m from the default MFILES (in kmod.mk) and
instead define MFILES appropriately for the uart(4) module build.
2006-02-24 01:49:36 +00:00
Andrew Gallatin
784daffb89 Unhook myri10ge from build in preparation for rename 2006-02-23 12:30:39 +00:00
Hajimu UMEMOTO
9bf40914d2 Obey opt_inet6.h in kernel build directory.
Reported by:	Peter Losher <plosher-keyword-freebsd.a36e57__at__plosh.net>
MFC after:	3 days
2006-02-20 12:30:32 +00:00
Yoshihiro Takahashi
58d89e5cef Disable the myri10ge driver on pc98. 2006-02-20 12:05:52 +00:00
Andrew Gallatin
2790e25d62 Hook the myri10ge driver to the i386 and amd64 module builds.
Sponsored by: Myricom Inc.
Reviewed by: scottl
2006-02-20 02:50:09 +00:00
Andrew Gallatin
b2fc195e1b 10GbE mode driver and binary firmware for Myricom's PCI-express NICs.
More info regarding these nics can be found at http://www.myri.com.

Please note that the files
sys/dev/myri10ge/{mcp_gen_header.h,myri10ge_mcp.h} are internally
shared between all our drivers (solaris, macosx, windows, linux, etc).
I'd like to keep these files unchanged, so I can just import newer
versions of them when the firmware API/ABI changes.  This means I'm
stuck with some of the crazy-long #define names, and possibly
non-style(9) characteristics of these files.

Many thanks to mlaier for doing firmware(9) just as I
needed it, and to scottl for his helpful review.

Reviewed by: scottl, glebius
Sponsored by: Myricom Inc.
2006-02-19 22:39:19 +00:00
Yaroslav Tykhiy
c0d157d85f For the coda5 module, CODA_COMPAT_5 is mandatory, not optional.
Without CODA_COMPAT_5, it would be equivalent to the plain coda
module.  Therefore just add -DCODA_COMPAT_5 to CFLAGS instead of
fiddling with opt_coda.h.  This is particularly important when
the module is built along with the kernel and CODA_COMPAT_5 isn't
in the kernel conf file (and so not in opt_coda.h either).

MFC after:	3 days
2006-02-19 02:43:42 +00:00
Yaroslav Tykhiy
9be0cda615 Style: Remove blank lines before EOF.
Tested by:	cvs diff -B
2006-02-18 23:49:28 +00:00
Yaroslav Tykhiy
7ad7a38277 Work around the fact that nfsclient SRCS must include
nfs_diskless.c if NFS_ROOT is in effect, e.g., present
in the kernel config file.  Otherwise the built module
won't load due to an undefined reference to nfs_setup_diskless.

MFC after:	3 days
2006-02-18 23:31:49 +00:00
Ruslan Ermilov
525312f7c0 Fix standalone module build.
Reported by:	Boris Samorodov
2006-02-17 10:52:59 +00:00
Yoshihiro Takahashi
42a64e5369 Disable the ipmi driver on pc98. 2006-02-14 12:55:07 +00:00
Doug Ambrisko
1c204a5731 Tie the ipmi driver into the i386/amd64 builds. 2006-02-13 17:56:24 +00:00
Pawel Jakub Dawidek
a80f82a4a3 Check rootvnode variable to see if we still want to ask for passphrase on
boot. Other methods just don't work properly.

MFC after:	3 days
2006-02-11 12:45:01 +00:00
Doug Ambrisko
37b1ce132c Add an OpenIPMI mostly compatible driver. This driver was developed
to work with ipmitools.  It works with other tools that have an OpenIPMI
driver interface.  The port will need to get updated to used this.
I have not implemented the IPMB mode yet so ioctl's for that don't
really do much otherwise it should work like the OpenIPMI version.
The ipmi.h definitions was derived from the ipmitool header file.
The bus attachments are done for smbios and pci/smbios.  Differences
in bus probe order for modules/static are delt with.  ACPI attachment
should be done.

This drivers registers with the watchdod(4) interface

Work to do:
     - BT interface
     - IPMB mode

This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64
kernel.

I will link this into the build on next week.

Tom Rhodes, helped me with the man page.

Sponsored by:   IronPort Systems Inc.
Inspired from:  ipmitool & Linux
2006-02-10 20:51:35 +00:00
Yaroslav Tykhiy
a35ebcc25d INET doesn't belong to opt_inet6.h: INET6 belongs to it. 2006-02-07 18:13:56 +00:00
Warner Losh
d87076c835 an driver not endian clean, so don't enable on sparc64 2006-02-05 17:38:28 +00:00
Max Laier
5bba2114d0 Make pflog a seperate module. As a result pflog_packet() becomes a function
pointer that is declared in pf_ioctl.c

Requested by:	yar (as part of the module build reorg)
MFC after:	1 week
X-MFC with:	yar's module reorg
2006-02-05 17:17:32 +00:00
Roman Kurakin
f2ca64ca71 Attach ce(4) to the build.
MFC after:	3 days
2006-01-31 23:11:35 +00:00
Marius Strobl
44ac0964e9 Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC
in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as
it should work just fine with the AMD PCnet family of chips on all archs
but is not yet meant to replace lnc(4). If a kernel includes all of le(4),
lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now.
2006-01-31 22:34:13 +00:00
Roman Kurakin
dfd1ff19b4 Add makefile for ce(4) module. 2006-01-29 22:10:54 +00:00
Max Laier
6aec1278dc firmware(9) is a subsystem to load binary data into the kernel via a
specially crafted module.  There are several handrolled sollutions to this
problem in the tree already which will be replaced with this.  They include
iwi(4), ipw(4), ispfw(4) and digi(4).

No objection from:	arch
MFC after:		2 weeks
X-MFC after:		some drivers have been converted
2006-01-29 02:52:42 +00:00