Without this change, DTrace will refuse to load a DOF section if the
function component of any of its probes exceeds DTRACE_FUNCNAMELEN (128).
Probes in C++ programs can have very long function components. Rather than
rejecting all probes if a single probe exceeds the limit, simply skip the
invalid probe and emit a warning. This ensures that valid probes are
instantiated.
PR: 207735
MFC after: 2 weeks
This allows one to enable DTrace probes relatively early during boot,
during SI_SUB_DTRACE_ANON, before dtrace(1) can invoked. The desired
enabling is created using dtrace -A, which writes a /boot/dtrace.dof
file and uses nextboot(8) to ensure that DTrace kernel modules are loaded
and that the DOF file describing the enabling is loaded by loader(8)
during the subsequent boot. The trace output can then be fetched with
dtrace -a.
With this commit, boot-time DTrace is only functional on i386 and amd64: on
other architectures, the high-resolution timer frequency is initialized
during SI_SUB_CLOCKS and is thus not available when the anonymous
tracing state is initialized. On x86, the TSC is used and is thus available
earlier.
MFC after: 1 month
Relnotes: yes
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
When a process is exiting, there is a narrow window where p_cred may be
NULL while its threads are still executing. Specifically, the last thread
to exit a process sets the process state to PRS_ZOMBIE with the proc
spinlock held and then calls thread_exit(). thread_exit() drops the spin
lock, permitting the process to be reaped and thus causing its cred struct
to be released. However, the exiting thread may still cause DTrace probes
to fire by calling sched_throw(), resulting in a double fault if such a
probe enabling attempts to access the GID or UID DIF variables.
The thread's cred reference is not susceptible to this race since it is not
released until after the thread has exited.
MFC after: 1 week
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
It would previously call into some unfinished Solaris compatibility code and
return without actually calling panic(9). The compatibility code is
unneeded, however, so just remove it and have dtrace_panic() call vpanic(9)
directly.
Differential Revision: https://reviews.freebsd.org/D2349
Reviewed by: avg
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Passing "-x lazyload" to dtrace -G during compilation causes dtrace(1) to
not link drti.o into the output object file, so the USDT probes are not created
during process startup. Instead, dtrace(1) will automatically discover and
create probes on the process' behalf when attaching.
Differential Revision: https://reviews.freebsd.org/D2203
Reviewed by: rpaulo
MFC after: 1 month
cannot happen on FreeBSD. r278136 overlooked the fact that a destructor
registered with devfs_set_cdevpriv(9) is invoked even in the case of an
error.
X-MFC-With: r278136
Since the upstream for cddl code is now illumos not sun, mechanically
convert all sun #ifdef's to illumos #ifdef's which have been used in all
newer code for some time.
Also do a manual pass to correct the use if #ifdef comments as per style(9)
as well as few uses of #if defined(__FreeBSD__) vs #ifndef illumos.
MFC after: 1 month
Sponsored by: Multiplay
In the old days callout(9) had 1 tick precision and that was inadequate
for some uses, e.g. DTrace profile module, so we had to emulate cyclic
API and behavior. Now we can directly use callout(9) in the very few
places where cyclic was used.
Differential Revision: https://reviews.freebsd.org/D1161
Reviewed by: gnn, jhb, markj
MFC after: 2 weeks
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
6679140 asymmetric alloc/dealloc activity can induce dynamic variable drops
6679193 dtrace_dynvar walker produces flood of dtrace_dynhash_sink
This finishes a set of merges from the older OpenSolaris releases.
Still the FreeBSD port has many differences that are difficult to
account for but that seems normal given that the kernels are different.
MFC after: 1 week
6851093 system drops to kmdb with anonymous dtrace probes + kmdb
This has no effect on FreeBSD (code is ifdef'ed) but is useful as
reference for future merges.
MFC after: 1 week
These have no effect on FreeBSD, in fact they are ifdef'ed,
but make easier future merges:
6699767 panic in spec_open()
6718877 crgetzoneid() use can cause problems when forking processes with
USDT providers in a non global zone
MFC after: 3 days
2915 DTrace in a zone should see "cpu", "curpsinfo", et al
2916 DTrace in a zone should be able to access fds[]
2917 DTrace in a zone should have limited provider access
MFC after: 2 weeks
usage from dtrace. The dtrace code already uses cdevpriv(9) since FreeBSD
8, so this change should be quite harmless.
Reviewed by: markj
Approved by: markj
MFC after: never
4248 dtrace(1M) should never create DOF with empty probes section
4249 Only probes from the first DTrace object file will be included
Illumos Revision: 4a20ab41aadcb81c53e72fc65886e964e9add59
Reference:
https://www.illumos.org/issues/4248https://www.illumos.org/issues/4249
Obtained from: Illumos
MFC after: 1 month
illumos/illumos-gate@6fb4854bed
This fixes the tst.resize1.d and tst.resize2.d DTrace tests, which have
been failing since r261122 since they were causing dtrace(1) to attempt to
allocate and use large amounts of memory, and get killed by the OOM killer
as a result.
MFC after: 1 month
aggregation IDs, as is done in the upstream illumos code. This still
requires some FreeBSD-specific code, as our vmem API is not identical to the
one in illumos.
Submitted by: Mike Ma <mikemandarine@gmail.com>
null-separated strings to a single string. This can be used to print the
full arguments of a process using execsnoop (from the DTrace toolkit) or
with the following one-liner:
dtrace -n 'syscall::execve:return {trace(curpsinfo->pr_psargs);}'
Note that this relies on the process arguments being cached via the struct
proc, which means that it will not work for argvs longer than
kern.ps_arg_cache_limit. However, the following rather non-portable
script can be used to extract any argv at exec time:
fbt::kern_execve:entry
{
printf("%s", memstr(args[1]->begin_argv, ' ',
args[1]->begin_envv - args[1]->begin_argv));
}
The debug.dtrace.memstr_max sysctl limits the maximum argument size to
memstr(). Thanks to Brendan Gregg for helpful comments on freebsd-dtrace.
Tested by: Fabian Keil (earlier version)
MFC after: 2 weeks
handlers rather than in the dtrace device open/close methods. The current
approach can cause a panic if the device is closed which the taskqueue
thread is active, or if a kernel module containing a provider is unloaded
while retained enablings are present and the dtrace device isn't opened.
Submitted by: gibbs (original version)
Reviewed by: gibbs
Approved by: re (glebius)
MFC after: 2 weeks
kld_unload event handler which gets invoked after a linker file has been
successfully unloaded. The kld_unload and kld_load event handlers are now
invoked with the shared linker lock held, while kld_unload_try is invoked
with the lock exclusively held.
Convert hwpmc(4) to use these event handlers instead of having
kern_kldload() and kern_kldunload() invoke hwpmc(4) hooks whenever files are
loaded or unloaded. This has no functional effect, but simplifes the linker
code somewhat.
Reviewed by: jhb
probes declared in a kernel module when that module is unloaded. In
particular,
* Unloading a module with active SDT probes will cause a panic. [1]
* A module's (FBT/SDT) probes aren't destroyed when the module is unloaded;
trying to use them after the fact will generally cause a panic.
This change fixes both problems by porting the DTrace module load/unload
handlers from illumos and registering them with the corresponding
EVENTHANDLER(9) handlers. This allows the DTrace framework to destroy all
probes defined in a module when that module is unloaded, and to prevent a
module unload from proceeding if some of its probes are active. The latter
problem has already been fixed for FBT probes by checking lf->nenabled in
kern_kldunload(), but moving the check into the DTrace framework generalizes
it to all kernel providers and also fixes a race in the current
implementation (since a probe may be activated between the check and the
call to linker_file_unload()).
Additionally, the SDT implementation has been reworked to define SDT
providers/probes/argtypes in linker sets rather than using SYSINIT/SYSUNINIT
to create and destroy SDT probes when a module is loaded or unloaded. This
simplifies things quite a bit since it means that pretty much all of the SDT
code can live in sdt.ko, and since it becomes easier to integrate SDT with
the DTrace framework. Furthermore, this allows FreeBSD to be quite flexible
in that SDT providers spanning multiple modules can be created on the fly
when a module is loaded; at the moment it looks like illumos' SDT
implementation requires all SDT probes to be statically defined in a single
kernel table.
PR: 166927, 166926, 166928
Reported by: davide [1]
Reviewed by: avg, trociny (earlier version)
MFC after: 1 month
users to guarantee that the output of DTrace scripts will be time-ordered.
This option is enabled by adding the line
#pragma D option temporal
to the beginning of a script, or by adding '-x temporal' to the arguments of
dtrace(1).
This change fixes a bug in the original port of the temporal option. This
bug was causing some assertions to fail, so they had been disabled; in this
revision the assertions are working properly and are enabled.
The DTrace version number has been bumped from 1.9.0 to 1.9.1 to reflect
the language change that's being introduced.
This change corresponds to part of illumos-gate commit e5803b76927480:
3021 option for time-ordered output from dtrace(1M)
Reviewed by: pfg
Obtained from: illumos
MFC after: 1 month
The following change from illumos brought caused DTrace to
pause in an interactive environment:
3026 libdtrace should set LD_NOLAZYLOAD=1 to help the pid provider
This was not detected during testing because it doesn't
affect scripts.
We shouldn't be changing the environment, especially since the
LD_NOLAZYLOAD option doesn't apply to our (GNU) ld.
Unfortunately the change from upstream was made in such a way
that it is very difficult to separate this change from the
others so, at least for now, it's better to just revert
everything.
Reference:
https://www.illumos.org/issues/3026
Reported by: Navdeep Parhar and Mark Johnston
Merge changes from illumos:
3021 option for time-ordered output from dtrace(1M)
3022 DTrace: keys should not affect the sort order when sorting by value
3023 it should be possible to dereference dynamic variables
3024 D integer narrowing needs some work
3025 register leak in D code generation
3026 libdtrace should set LD_NOLAZYLOAD=1 to help the pid provider
This brings yet another feature implemented in upstream DTrace.
A complete description is available here:
http://dtrace.org/blogs/ahl/2012/07/28/my-new-dtrace-favorite/
This change bumps the DT_VERS_* number to 1.9.1 in
accordance to what is done in illumos.
This change was somewhat complicated because upstream is mixed many
changes in an individual commit and some of the tests don't really
apply to us.
There are also appear to be differences in timestamping with Solaris
so we had to workaround some assertions making sure no regression
happened.
Special thanks to Fabian Keil for changes and testing.
Illumos Revisions: 13758:23432da34147
Reference:
https://www.illumos.org/issues/3021https://www.illumos.org/issues/3022https://www.illumos.org/issues/3023https://www.illumos.org/issues/3024https://www.illumos.org/issues/3025https://www.illumos.org/issues/1694
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 1 months
