Commit Graph

28 Commits

Author SHA1 Message Date
Warner Losh
96d951d396 Make a pass and cleanup the printfs from this driver.
Approved by: re (scottl) blanket ep
2005-07-01 05:31:23 +00:00
Warner Losh
c4af929fb7 o When calling ep_get_macaddr(), provide it a local buffer. Add a comment
that says why we do this (or rather, explains that it is some voodoo magic
  that's poorly understood).  The local buffer fixes the crash on attach.
o Rename get_e() to ep_get_e() to avoid namespace pollution.

Submitted by: mux
Approved by: re (scottl)
2005-06-26 04:19:45 +00:00
Warner Losh
a20e4848bd u_intXX_t -> uintXX_t while I'm here. 2005-01-20 19:39:33 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Warner Losh
f8b82da4a7 Remove duplicate $FreeBSD$
Noticed by: njl
2004-07-22 07:11:15 +00:00
Warner Losh
6b5dc774ed Pass sc to GO_WINDOW macro.
Use SET_IRQ for pccard case, rather than exapnding it inline.

Requested by: mdodd
2003-10-26 22:28:20 +00:00
Warner Losh
c365ed47e4 Whole grab-bag of changes:
o Make the driver MPSAFE
o Some changes due to diff reduction effort with vx.
o Removed some obsolete junk.

Reviewed by: sam, modd
2003-10-25 04:09:49 +00:00
Warner Losh
3dc59524c7 Transition to using bus_space macros rather than the inb/outb/etc.
Use EP_{READ,WRITE}{,_MULTI}_{1,2,4} instead.  I've had several people
submit patches like this over the years of varying qualities, markm
being the last.  The names were chosen in consulation with mdodd on
irc.

I've tested this with only PCMCIA cards: 3CCE589EC and 3CCSH572BT.
I've not tried with my more extensive ISA, EISA and cbus collection.

Reviewed by: mdodd
2003-10-18 15:22:43 +00:00
Mark Murray
024351e027 Style fixes of the whitespace variety. Fix long lines and tabs. 2003-08-30 08:10:58 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Mark Murray
5146af6d82 Style(9) cleanup. There was no consistent style in this driver, and
The next round of commits will be to fix up locking in it. This lot
is to at least give a consistent base to work off.

OK'ed by:	imp, mdodd
2003-07-17 19:37:56 +00:00
Matthew N. Dodd
672fc9ebf6 - Free interrupt handler in ep_free().
- Move ep_pccard_detach() to if_ep.c and rename to ep_detach()
- Specify detach methods for all bus frontends.
2003-03-29 22:27:41 +00:00
Matthew N. Dodd
18e03d5e08 Checksum the configuration EEPROM. 2003-03-29 21:57:32 +00:00
Matthew N. Dodd
b26809608c Register dependency on the elink module. 2003-03-29 13:45:17 +00:00
Marcel Moolenaar
1583e8d08e Fix compilation on non-i386 machines. Inconsistent conditional
compilation yielded definitions that we're used.
2003-02-23 03:39:22 +00:00
Matthew N. Dodd
8ae37ad0ba Bandaid the bits that use the elink_foo() functions which are
i386 only at this point.
2003-02-13 23:01:59 +00:00
Yoshihiro Takahashi
8297c2fc98 Fixed to support 3Com 3C569B for PC-98.
Submitted by:	"Hirokazu WATANABE" <gwna@geocities.co.jp>
2000-12-09 04:25:07 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Warner Losh
07dad7e607 Remove 7 unnecessary includes frmo phk's script 2000-09-20 19:31:37 +00:00
Matthew N. Dodd
5ce6286805 Properly detect ISA cards in EISA mode and skip them in the ISA identify
routine so that they will be picked up by the EISA front end.

PR:		i386/2598
2000-07-18 06:37:08 +00:00
Matthew N. Dodd
0e8fe3f0e9 Fix a bug in the last commit. >> 4 instead of >> 8. *bap*
Fix a long-standing bug where I used a 'break;' instead of a 'continue;';
you had to have multiple ISA boards in non-PnP mode with an 'unknown' board
with a lower MAC address to find this one.  Since I have 4 3c5x9 boards
in my test box I was somewhat confused when this happened. :)

Make the messages printed by ep_isa_identify() a little more consistent;
we'll only see them in verbose boot mode but it makes me feel better if
they look nice.
2000-01-23 08:46:21 +00:00
Matthew N. Dodd
adc098b163 Add the ID for the 3c509-TPC.
Also, while I'm here, add a mechanism to catch unknown board IDs that
are likely to be 3c509s and allow them to be attached.

PR:		kern/16304
Submitted by:	Kelly Yancey <kbyanc@posi.net>
2000-01-23 08:23:38 +00:00
Matthew N. Dodd
d6eb71ddd5 Whitespace cleanups. 1999-12-06 09:16:13 +00:00
Matthew N. Dodd
8d133d9561 Add a delay (per the databook) to the get_eeprom_data() loop so
that the read EEPROM command has time to execute.

I didn't observe any difference in behavior on my test system but
this is the documented "correct behavior".
1999-12-06 08:59:52 +00:00
Matthew N. Dodd
0613716013 Standardize device descriptions so that there is parity between PnP
descriptions and non-PnP descriptions.
1999-12-06 08:40:59 +00:00
Matthew N. Dodd
94d49d9a35 Correctly implement the non-PnP enumeration of ISA board.
We now correctly skip boards that have PnP support enabled, or are in
test mode.  The 3c509s support a number of combinations of device
probing, as per the databook.

	- ISA only
	- PnP only
	- ISA or PnP

We will allow cards that can be dealt with by PnP to be attached by the
PnP enumerator.

This fixes the bogus detection of boards at weird ioports.
1999-12-06 08:31:47 +00:00
Matthew N. Dodd
79a9057038 HEADS UP! All 3c5x9 users!
- Rip out all the static softc stuff and do softc allocation the right way.
- Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY
  method to enumerate all non-PnP ISA devices.

  This has the following consequences:

	- No 'ep' devices may be hardwired.
	  - All hardwired devices will probably be detected twice.
	    By hardwired I mean:

		device          ep0     at isa? port 0x300 irq 10

	- 'ep' devices are ordered by bus, slot, and then MAC address.

- Make 3c509B cards work in PnP mode.  Yes, they really work.
- Convert over to using ifmedia for media selection.  No more of this
  lame 'linkX' stuff.
- Consolidate a lot of duplicated code.
- Make a stab at not breaking MII based PCCARD devices.
  I doubt that the PCCARD stuff works any more than it did before my
  changes but theres hope.  My PCCARD hardware should arrive in a
  week or so.
- Retreive the media settings from the card EEPROM rather than guessing.
  I've got a 3c509-TPO that thinks its got an AUI port and if others
  can report similar problems I'll write a bit of clever code that will
  fix this but right now it works correctly on all but 1 card.
- Clean up a few things and make some cosmetic changes.
- Add myself as the MAINTAINER since nobody else wants to.  I'm
  in the best position to do this as I've got an example of most
  of the cards:

	EISA	3c579	bnc/aui
	MCA	3c529	tp/aui
	ISA	3c509	tpo
	ISA-PnP	3c509B	combo

   If someone wants to send me a any cards I don't have I'd appriciate
   it.  Also welcome are 3c59x boards since I'll be folding if_vx and
   if_ep at some point.
1999-10-27 06:25:16 +00:00
Matthew N. Dodd
39b547ce4d - Split out the ISA and PCCARD specific code.
- Split out the prototypes, externs and struct decls from if_epreg.h into
  if_epvar.h.

- Add support for MCA based Etherlink III (3c529) devices.

None of this code is used right now; the old if_ep driver is still
in place and used.

I will eventually get around to converting if_ep_isa.c to newbus once I've
had a talk with Peter and DFR about the DEVICE_IDENTIFY() method.

I have tested this code on my PS/2.  It works.  I would like EISA and ISA
testers since my example hardware hasn't arrived yet.

Add:

dev/ep/if_ep.c          optional ep
dev/ep/if_ep_isa.c      optional ep isa
dev/ep/if_ep_eisa.c     optional ep eisa
dev/ep/if_ep_mca.c      optional ep mca
dev/ep/if_ep_pccard.c   optional ep card

to sys/conf/files

Remove:

i386/eisa/3c5x9.c             optional        ep
i386/isa/if_ep.c              optional        ep

from sys/i386/conf/files.i386

PCCARD testers wanted!

I will switch off and cvs rm the old driver in favor of this copy once
I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00