Commit Graph

1484 Commits

Author SHA1 Message Date
Marcel Moolenaar
a602be7b07 Since printf also has at least one critical section, we need to
initialize pc_curthread. While here, rename early_pcpu to pcpu0
to be conistent (compare thread0 and proc0).
2006-11-18 23:15:25 +00:00
Marcel Moolenaar
77121031e7 Now that printf() needs the PCPU, set it up before we call printf().
Change the pc_pcb field from a pointer to struct pcb to struct pcb
so that sizeof(struct pcb) includes the PCB we use for IPI_STOP.
Statically declare early_pcb so that we don't have to allocate the
PCB for thread0. This way we can setup the PCPU before cninit()
and thus before we use printf().
2006-11-18 21:52:26 +00:00
Marcel Moolenaar
2fd31a5e0d Revert previous commit. PC_CONS_BUFR is not used nor needed by
assembly.
2006-11-18 21:48:13 +00:00
Ruslan Ermilov
26af9ac7d0 Fix a comment. 2006-11-13 06:26:57 +00:00
Alan Cox
44b8bd66f9 Make pmap_enter() responsible for setting PG_WRITEABLE instead
of its caller.  (As a beneficial side-effect, a high-contention
acquisition of the page queues lock in vm_fault() is eliminated.)
2006-11-12 21:48:34 +00:00
Robert Watson
43593547a3 Add missing includes of priv.h. 2006-11-06 17:43:10 +00:00
Robert Watson
acd3428b7d Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges.  These may
require some future tweaking.

Sponsored by:           nCircle Network Security, Inc.
Obtained from:          TrustedBSD Project
Discussed on:           arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
                        Alex Lyashkov <umka at sevcity dot net>,
                        Skip Ford <skip dot ford at verizon dot net>,
                        Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
John Birrell
8391a99bf7 Remove the KDTRACE option again because of the complaints about having
it as a default.

For the record, the KDTRACE option caused _no_ additional source files
to be compiled in; certainly no CDDL source files. All it did was to
allow existing BSD licensed kernel files to include one or more CDDL
header files.

By removing this from DEFAULTS, the onus is on a kernel builder to add
the option to the kernel config, possibly by including GENERIC and
customising from there. It means that DTrace won't be a feature
available in FreeBSD by default, which is the way I intended it to be.

Without this option, you can't load the dtrace module (which contains
the dtrace device and the DTrace framework). This is equivalent to
requiring an option in a kernel config before you can load the linux
emulation module, for example.

I think it is a mistake to have DTrace ported to FreeBSD, but not
to have it available to everyone, all the time. The only exception
to this is the companies which distribute systems with FreeBSD embedded.
Those companies will customise their systems anyway. The KDTRACE
option was intended for them, and only them.
2006-11-04 23:50:12 +00:00
John Birrell
1f80cd9398 Build in kernel support for loading DTrace modules by default. This
adds the hooks that DTrace modules register with, and adds a few functions
which have the dtrace_ prefix to allow the DTrace FBT (function boundary
trace) provider to avoid tracing because they are called from the DTtrace
probe context.

Unlike other forms of tracing and debug, DTrace support in the kernel
incurs negligible run-time cost.

I think the only reason why anyone wouldn't want to have kernel support
enabled for DTrace would be due to the license (CDDL) under which DTrace
is released.
2006-11-04 04:58:10 +00:00
Marcel Moolenaar
5910f6cc85 Make sure kern_envp is never NULL. If we don't get a pointer to
the environment from the loader, use the static environment.
2006-11-03 04:06:17 +00:00
John Birrell
3d068827c2 Add a cnputs() function to write a string to the console with
a lock to prevent interspersed strings written from different CPUs
at the same time.

To avoid putting a buffer on the stack or having to malloc one,
space is incorporated in the per-cpu structure. The buffer
size if 128 bytes; chosen because it's the next power of 2 size
up from 80 characters.

String writes to the console are buffered up the end of the line
or until the buffer fills. Then the buffer is flushed to all
console devices.

Existing low level console output via cnputc() is unaffected by
this change. ithread calls to log() are also unaffected to avoid
blocking those threads.

A minor change to the behaviour in a panic situation is that
console output will still be buffered, but won't be written to
a tty as before. This should prevent interspersed panic output
as a number of CPUs panic before we end up single threaded
running ddb.

Reviewed by:	scottl, jhb
MFC after:	2 weeks
2006-11-01 04:54:51 +00:00
John Birrell
3750d1ecad Remove the KSE option now that it's in DEFAULTS on these arches/machines.
The 'nooption' kernel config entry has to be used to turn KSE off now.
This isn't my preferred way of dealing with this, but I'll defer to
scottl's experience with the io/mem kernel option change and the grief
experienced over that.

Submitted by:	scottl@
2006-10-26 22:11:35 +00:00
John Birrell
013d6d8cb4 Add 'options KSE' to the kernel config DEFAULTS on all arches/machines
except sun4v.

This change makes the transition from a default to an option more
transparent and is an attempt to head off all the compliants that are
likely from people who don't read UPDATING, based on experience with
the io/mem change.

Submitted by:	scottl@
2006-10-26 22:05:25 +00:00
John Birrell
8460a577a4 Make KSE a kernel option, turned on by default in all GENERIC
kernel configs except sun4v (which doesn't process signals properly
with KSE).

Reviewed by:	davidxu@
2006-10-26 21:42:22 +00:00
Ruslan Ermilov
837f167eb2 Move "device splash" back to MI NOTES and "files", it's MI. 2006-10-23 13:23:14 +00:00
Marcel Moolenaar
5118cd1e4a o Eliminate nexus_print_resources(). Use resource_list_print_type()
instead.
o  Eliminate nexus_print_all_resources(). Inline the function body
   in nexus_print_child().
2006-10-23 00:38:58 +00:00
Alan Cox
43200cd3ed Eliminate unnecessary PG_BUSY tests. 2006-10-22 04:18:01 +00:00
Dag-Erling Smørgrav
c43ac89acc Move more MD devices and options out of MI NOTES. 2006-10-20 09:52:27 +00:00
Dag-Erling Smørgrav
c276283866 The VGA_DEBUG option only exists on {amd64,i386,ia64}.
Also remove 'device io' from amd64 NOTES; DEFAULTS takes care of it.
2006-10-20 08:56:26 +00:00
Marcel Moolenaar
d9bbf2a8a9 Fix previous revision:
o  day and mday are the same. No need to subtract 1 from mday.
o  Set dow to -1 as clock_ct_to_ts() checks this field and
   returns EINVAL on any day of the week but Sunday.
2006-10-19 00:53:35 +00:00
David Xu
5f641fc0fb o Add keyword volatile for user mutex owner field.
o Fix type consistent problem by using type long for old
  umtx and wait channel.
o Rename casuptr to casuword.
2006-10-17 02:24:47 +00:00
Hiroki Sato
b84baf83b9 Add a newline to the printf().
Spotted by:	Peter Carah <pete@altadena.net>
MFC after:	3 days
2006-10-15 16:52:59 +00:00
Marcel Moolenaar
84ee7f6ba2 Include freebsd32_signal.h now that signal-related definitions are
moved there.

Found by: ia64 tinderbox.
2006-10-06 19:33:44 +00:00
Simon L. B. Nielsen
4517aab293 - Remove SCHED_ULE from GENERIC to better avoid foot-shooting by
unsuspecting users.
- Add a comment in NOTES about experimental status of SCHED_ULE.
- Make warning about experimental status in sched_ule(4) a bit
  stronger.

Suggested and reviewed by:	dougb
Discussed on:			developers
MFC after:			3 days
2006-10-05 20:31:58 +00:00
John Birrell
6825d60738 PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
Security:
Move the relocation definitions to the common elf header so that DTrace
can use them on one architecture targeted to a different one.

Add the additional ELF types defines in Sun's "Linker and Libraries"
manual.
2006-10-04 21:37:10 +00:00
Poul-Henning Kamp
60e88b878c Use calendrical calculations from subr_clock.c instead of home-rolled. 2006-10-02 16:32:36 +00:00
Poul-Henning Kamp
b69f71eb29 Second part of a little cleanup in the calendar/timezone/RTC handling.
Split subr_clock.c in two parts (by repo-copy):
   subr_clock.c contains generic RTC and calendaric stuff. etc.
   subr_rtc.c contains the newbus'ified RTC interface.

Centralize the machdep.{adjkerntz,disable_rtc_set,wall_cmos_clock}
sysctls and associated variables into subr_clock.c.  They are
not machine dependent and we have generic code that relies on being
present so they are not even optional.
2006-10-02 15:42:02 +00:00
Poul-Henning Kamp
f645b0b51c First part of a little cleanup in the calendar/timezone/RTC handling.
Move relevant variables to <sys/clock.h> and fix #includes as necessary.

Use libkern's much more time- & spamce-efficient BCD routines.
2006-10-02 12:59:59 +00:00
Ruslan Ermilov
6c9fdda750 Added COMPAT_FREEBSD6 option. 2006-09-26 12:36:34 +00:00
Alexander Kabaev
d9cb97ff9d Use __builtin_va_start instead of __builtin_stdarg_start. GCC4 obsoletes
the former and  __builtin_va_start was present in all GCC version 3.1 and
later.
2006-09-21 01:37:02 +00:00
Robert Watson
ef0d1723db Add audit hooks for ppc, ia64 system call paths.
Reviewed by:	marcel (ia64)
Obtained from:	TrustedBSD Project
MFC after:	3 days
2006-09-16 17:03:02 +00:00
David Xu
66e1c26dba Implement casuword32, compare and set user integer, thank Marcel Moolenarr
who wrote the IA64 version of casuword32.
2006-08-28 02:28:15 +00:00
Alan Cox
b554f899bd Eliminate unused definitions. (They came from NetBSD.)
Discussed with: cognet, grehan, marcel
2006-08-25 23:51:11 +00:00
John Baldwin
7e9f73f3ed First pass at allowing memory to be mapped using cache modes other than
WB (write-back) on x86 via control bits in PTEs and PDEs (including making
use of the PAT MSR).  Changes include:
- A new pmap_mapdev_attr() function for amd64 and i386 which takes an
  additional parameter (relative to pmap_mapdev()) specifying the cache
  mode for this mapping.  Note that on amd64 only WB mappings are done with
  the direct map, all other modes result in a private mapping.
- pmap_mapdev() on i386 and amd64 now defaults to using UC (uncached)
  mappings rather than WB.  Previously we relied on the BIOS setting up
  MTRR's to enforce memio regions being treated as UC.  This might make
  hw.cbb_start_memory unnecessary in some cases now for example.
- A new pmap_mapbios()/pmap_unmapbios() API has been added to allow places
  that used pmap_mapdev() to map non-device memory (such as ACPI tables)
  to do so using WB as before.
- A new pmap_change_attr() function for amd64 and i386 that changes the
  caching mode for a range of KVA.

Reviewed by:	alc
2006-08-11 19:22:57 +00:00
Alan Cox
78985e424a Complete the transition from pmap_page_protect() to pmap_remove_write().
Originally, I had adopted sparc64's name, pmap_clear_write(), for the
function that is now pmap_remove_write().  However, this function is more
like pmap_remove_all() than like pmap_clear_modify() or
pmap_clear_reference(), hence, the name change.

The higher-level rationale behind this change is described in
src/sys/amd64/amd64/pmap.c revision 1.567.  The short version is that I'm
trying to clean up and fix our support for execute access.

Reviewed by: marcel@ (ia64)
2006-08-01 19:06:06 +00:00
Marcel Moolenaar
302981e72a Remove sio(4) and related options from MI files to amd64, i386
and pc98 MD files. Remove nodevice and nooption lines specific
to sio(4) from ia64, powerpc and sparc64 NOTES. There were no
such lines for arm yet.
sio(4) is usable on less than half the platforms, not counting
a future mips platform. Its presence in MI files is therefore
increasingly becoming a burden.
2006-07-29 18:38:54 +00:00
John Baldwin
cb76d9b05c Retire SYF_ARGMASK and remove both SYF_MPSAFE and SYF_ARGMASK. sy_narg is
now back to just being an argument count.
2006-07-28 20:22:58 +00:00
John Baldwin
af5bf12239 Now that all system calls are MPSAFE, retire the SYF_MPSAFE flag used to
mark system calls as being MPSAFE:
- Stop conditionally acquiring Giant around system call invocations.
- Remove all of the 'M' prefixes from the master system call files.
- Remove support for the 'M' prefix from the script that generates the
  syscall-related files from the master system call files.
- Don't explicitly set SYF_MPSAFE when registering nfssvc.
2006-07-28 19:05:28 +00:00
John Baldwin
22ea1bc57a Unify the checking for lock misbehavior in the various syscall()
implementations and adjust some of the checks while I'm here:
- Add a new check to make sure we don't return from a syscall in a critical
  section.
- Add a new explicit check before userret() to make sure we don't return
  with any locks held.  The advantage here is that we can include the
  syscall number and name in syscall() whereas that info is not available
  in userret().
- Drop the mtx_assert()'s of sched_lock and Giant.  They are replaced by
  the more general checks just added.

MFC after:	2 weeks
2006-07-27 22:32:30 +00:00
John Baldwin
0c5d1dbd43 Add KTR_SYSC tracing to the syscall() implementations that didn't have it
yet.

MFC after:	1 week
2006-07-27 21:25:50 +00:00
John Baldwin
00f1856905 Add missing ptrace(2) system-call stops to various syscall()
implementations.

MFC after:	1 week
2006-07-27 19:50:16 +00:00
Marcel Moolenaar
4b8d8ccc23 Move default GEOM classes from files.ia64, where they were marked
standard, to the DEFAULTS file.
2006-07-17 20:02:51 +00:00
John Baldwin
19e9205a23 Simplify the pager support in DDB. Allowing different db commands to
install custom pager functions didn't actually happen in practice (they
all just used the simple pager and passed in a local quit pointer).  So,
just hardcode the simple pager as the only pager and make it set a global
db_pager_quit flag that db commands can check when the user hits 'q' (or a
suitable variant) at the pager prompt.  Also, now that it's easy to do so,
enable paging by default for all ddb commands.  Any command that wishes to
honor the quit flag can do so by checking db_pager_quit.  Note that the
pager can also be effectively disabled by setting $lines to 0.

Other fixes:
- 'show idt' on i386 and pc98 now actually checks the quit flag and
  terminates early.
- 'show intr' now actually checks the quit flag and terminates early.
2006-07-12 21:22:44 +00:00
Matt Jacob
086ba9f74f Make the firmware assist driver resident in
preparation for isp using it.
2006-07-09 16:40:31 +00:00
Bruce Evans
9366bb574f Fixed FP_R*. fp{get_set}round() apparently never worked on ia64, since
the alpha values were used and are quite different.

Fixed some style bugs by copying from the i386 version where it is better.
2006-07-05 06:10:21 +00:00
Marcel Moolenaar
559adb10ad Partial support for branch long emulation. This only emulates the
branch long jump and not the branch long call. Support for that is
forthcoming.
2006-06-29 19:59:18 +00:00
Alan Cox
9b123ca12a Make several changes to pmap_enter_quick_locked():
1. Make the caller responsible for performing pmap_install().  This reduces
the number of times that pmap_install() is performed by
pmap_enter_object() from twice per page to twice overall.

2. Don't block if pmap_find_pte() is unable to allocate a PTE.  If it did
block, then it might wind up mapping a cache page.  Specifically, if
pmap_enter_quick_locked() slept when called from pmap_enter_object(), the
page daemon could change an active or inactive page into a cache page just
before it was to be mapped.

3. Bail out of pmap_enter_quick_locked() if pv entries aren't plentiful.
In other words, don't force the allocation of a pv entry if they aren't
readily available.

Reviewed by: marcel@
2006-06-27 05:05:05 +00:00
Sergey Babkin
d81175c738 Backed out the change by request from rwatson.
PR:		kern/14584
2006-06-26 22:03:22 +00:00
Sergey Babkin
7a799f1ef0 The common UID/GID space implementation. It has been discussed on -arch
in 1999, and there are changes to the sysctl names compared to PR,
according to that discussion. The description is in sys/conf/NOTES.
Lines in the GENERIC files are added in commented-out form.
I'll attach the test script I've used to PR.

PR:		kern/14584
Submitted by:	babkin
2006-06-25 18:37:44 +00:00
Marcel Moolenaar
0705941372 Update to SDM 2.2:
o  Add tf (test feature) instruction,
o  Add vmsw (VM switch) instruction.

While here, update copyright.

MFC after: 1 week
2006-06-24 19:21:11 +00:00