When no interface is specified results in a syntax error in the rc
script. Only execute poststart when an interface has been specified.
PR: 263358
Submitted by: markj
Reported by: Joshua Kinard <freebsd@kumba.dev>
Fixes: 0da2c91e64
MFC after: 3 days
To allow for a dynamic page size on arm64 have the runtime linker
query the kernel for the currentl page size.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34765
Before, preloaded objects, if not listed as needed for any normally
linked objects, were silently ignored.
Preloaded objects are printed with the `[preloaded]` herald. The list
includes the objects not listed explicitly as recursive dependencies of
the main object, effectively dsos loaded by LD_PRELOAD mechanism.
vdso is listed as well, since it is not needed by anything.
Since there is no DT_NEEDED entry for LD_PRELOADed objects, they are
usually printed using LD_TRACE_LOADED_OBJECTS_FTM2 format due to the
failure of the heuristic based on the presence of the 'lib' prefix.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34716
The zfskeys service script starts before the zfs service script, so that
dataset decryption keys are available when `zfs mount -a` is run. One of
the potential edge cases of this design is that if a key is stored on
ZFS it won't be loaded until `zfs mount -a` is issued.
In order to address that let's try to load the additional keys and mount
related ZFS datasets after the zfs script finishes its standard mounting
procedure.
PR: 262468
Reported by: Graham Perrin <grahamperrin@gmail.com>
Reviewed by: allanjude
Approved by: allanjude (src)
Fixes: 33ff39796f Add zfskeys rc.d script for auto-loading encryption keys
MFC after: 3 days
Sponsored by: Modirum
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D34601
By rc.conf(5), setting rc_startmsgs="NO" should silence start messages.
Fix a few rc scripts by using startmsg.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
startmsg is a new rc.subr(8) function function to be used instead of
echo(1) when for boot messages. It replaces the often forgotten
check_startmsgs && echo ...
with
startmsg ...
No functional change intended.
I adjusted the commit message and did some final clean-ups of the patch
before committing.
PR: 255207
Reported by: Jose Luis Duran <jlduran@gmail.com>
Reviewed by: imp, 0mp
Approved by: imp (src)
Differential Revision: https://reviews.freebsd.org/D34514
/etc/rc.d/dumpon runs before /etc/rc.d/swap. When encrypted swap is in
use the .eli or .bde device will not exist at the time dumpon runs.
Even if this is addressed it does not make sense to dump core to
encrypted swap, as the encryption key will not be available after
reboot rendering the dump useless. Thus, for the case that dumpdev=AUTO
and encrypted swap is in use, strip the extension and use the underlying
device.
Emit a warning if we are using the underlying device and the user has not
configured dump encryption, so that the user knows that the will not be
encrypted.
PR: 238301
Reported by: Ivan Rozhuk
Reviewed by: jilles
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34474
- Use the standard *_flags variable for additional flags.
- Style: do not create unnecessary variables
- Do not set the defaults in the service script. This is what
/etc/defaults/rc.conf is for.
- Do not set additional flags via commands_args. ggated_flags are
already included in the final invocation. See rc.subr(8) for details.
- Document the meaning of ggated_config in /etc/defaults/rc.conf.
Approved by: eugen (src)
Fixes: c068632981 Add ggated rc script
Differential Revision: https://reviews.freebsd.org/D34439
When enabled, have the framework use the boottrace(8) utility to execute
each rc script, generating trace entries for the entire suite of
scripts.
Reviewed by: 0mp (slightly earlier version)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31930
Arno Tuber reported via email that he needed to restart the gssd daemon
after booting, to get his Kerberized NFS mount to work.
Without this patch, rcorder shows that the gssd starts before NETWORKING
and kdc. The gssd will need NETWORKING to connect to the KDC and, if
the kdc is running on the same system, it does not make sense to start it
before the kdc. This fixed the problem for Arno.
While here, I also added a "# BEFORE: mountcritremote".
It does not affect ordering at this time, but I felt
it should be added, since the gssd needs to be running
when remote NFS mounts are done.
PR: 261939
Reported by: anothatuber@gmail.com
Tested by: anothatuber@gmail.com
Reviewed by: rew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34265
it seems that glibc supports them, and such spelling is mentioned in the
ld.bfd manual. Idea seems to auto-correct some quoting/makefile sytnax
errors on linker command line.
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34247
NanoBSD or, more generally, systems with root_rw_mount="NO" are not able
to remove the firstboot_sentinel file, typically /firstboot, because the
logic in /etc/rc is currently inverted.
When checkyesno root_rw_mount tests on a read-only file system, the
return is 1, hence avoiding the option to mount the system read-write.
Restore the ability to remove the firstboot_sentinel file on read-only
mounted file systems.
This change was introduced in 40adda8665, and partially fixed in
1ce07411fa.
Differential Revision: https://reviews.freebsd.org/D34166
PR#254282 reports a problem where nullfs mounts cannot be
exported via mountd for FreeBSD 13.0.
The problem seems to be that, to do the nullfs mounts in
/etc/fstab, they require the "late" mount option, so that the
underlying filesystem is mounted (ZFS for the PR).
Adding "mountlate" to the REQUIRE list in /etc/rc.d/mountd
fixes the problem, but that results in a dependency cycle
because /etc/rc.d/lockd specifies:
REQUIRE: nfsd
BEFORE: DAEMON
--> which forces mountd to preceed DAEMON.
This patch removes "nfsd" from REQUIRE for lockd and statd,
then adds mountlate to REQUIRE for mountd, to fix this
problem. Having lockd REQUIRE nfsd was done in the NetBSD
code when it was pulled into FreeBSD and there does not
seem to be a need for this.
In case this causes problems, a long MFC has been specified.
PR: 254282
Differential Revision: https://reviews.freebsd.org/D33256
MFC after: 3 months
This addresses the following boot message:
/etc/rc: WARNING: $zfskeys_enable is not set properly - see rc.conf(5).
Reported by: Mark Millard
Sponsored by: Modirum MDPay
Sponsored by: Klara Inc.
Fixes: bfb7a31b6a ("rc: Hook zfskeys to the build")
Fixes: 33ff39796f ("Add zfskeys rc.d script for auto-loading encryption keys")
When a use sets umask in login.conf(5) to 027 or 077 a subsequently
fetched /var/db/ntpd.leap-seconds.list will inherit the permissions
allowed by the umask, resulting in a file that may not be readable
ntpd running under the ntp account. This patch adds a umask command
to preempt the umask in login.conf(5) prior to fetching a new copy
of the leap-seconds file.
PR: 261298
Reported by: Martin Waschbusch <martin@waschbuesch.de>
MFC after: 3 days
And put the tcp-wrapper utilities in it.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33439
Move some needed binaries/libs from FreeBSD-utilities to FreeBSD_runtime.
This is everything needed to boot to multiuser with FreeBSD-rc installed.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33435
YP is less and less used, split them to users have the choice to not
install them.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33441
Like wpa_supplicant, hostapd does not automatically UP the interface
when configured. The fix is similar to 5fcdc19a81.
Reported by: avg
Tested by: avg
MFC after: 1 week
In network6_getladdr() we are iterating over inet6 lines and are not
interested in any others. So tell ifconfig to limit output to "inet6"
as much as possible.
This is probably a micro-optimisation but was noticed while looking
at other IPv6-related boot-time improvements.
MFC after: 1 week
- Include <machine/tls.h> in MD rtld_machdep.h headers.
- Remove local definitions of TLS_* constants from rtld_machdep.h
headers and libc using the values from <machine/tls.h> instead.
- Use _tcb_set() instead of inlined versions in MD
allocate_initial_tls() routines in rtld. The one exception is amd64
whose _tcb_set() invokes the amd64_set_fsbase ifunc. rtld cannot
use ifuncs, so amd64 inlines the logic to optionally write to fsbase
directly.
- Use _tcb_set() instead of _set_tp() in libc.
- Use '&_tcb_get()->tcb_dtv' instead of _get_tp() in both rtld and libc.
This permits removing _get_tp.c from rtld.
- Use TLS_TCB_SIZE and TLS_TCB_ALIGN with allocate_tls() in MD
allocate_initial_tls() routines in rtld.
Reviewed by: kib, jrtc27 (earlier version)
Differential Revision: https://reviews.freebsd.org/D33353
This matches the TLS_TCB_ALIGN definition in libc.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33349
Previously TLS_DTV_OFFSET was added to the offset passed to
tls_get_addr_common; however, this approach matches powerpc and RISC-V
and better matches the intention.
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33347
This is the more standard name for the bias of dtv pointers used on
other platforms. This also fixes a few other places that were using
the wrong bias previously on MIPS such as dlpi_tls_data in struct
dl_phdr_info and the recently added __libc_tls_get_addr().
Reviewed by: kib, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33346
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
This disables the random (between zero and one seconds) delay before
rtsol and rtsold send a a Router Solicitation packet. This delay is
specified as a SHOULD by RFC 4861 for avoidance of network congestion,
but network speeds have increased enough in the 25 years since this
first appeared (in RFC 1970) that it seems unnecessary as a default
at this point.
This speeds up the FreeBSD boot process by an average of 500 ms.
Reviewed by: kp
MFC after: 1 week
Relnotes: yes
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D33089
Variables must be quoted if they contain non-alphanumeric characters.
Warner noted in the review that the lack of quoting causing problems
here is rather an edge case. I believe that it's worth adding the quotes
here anyway because this is what the specification says and there is no
good reason not to follow it.
Reviewed by: imp
Approved by: imp (src)
MFC after: 7 days
