#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD$

# GENERIC98 -- Generic PC98 machine with WD/SCSI disks

machine		pc98
cpu		I386_CPU
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		GENERIC98
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	PC98			#PC98
options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	MFS			#Memory Filesystem
options 	MFS_ROOT		#MFS usable as root device, "MFS" req'ed
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, "NFS" req'ed
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root. "CD9660" req'ed
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options 	EPSON_BOUNCEDMA		#use bounce buufer for 15-16M
#options 	EPSON_MEMWIN		#EPSON memory window support
options 	UCONSOLE		#Allow users to grab the console
#options 	LINE30
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) syscall trace support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options 	NCPU=2			# number of CPUs
#options 	NBUS=4			# number of busses
#options 	NAPIC=1			# number of IO APICs
#options 	NINTR=24		# number of INTs

controller	isa0
controller	pnp0			# PnP support for ISA
controller	pci0

# Floppy drives
controller	fdc0	at isa? port IO_FD1 irq 11 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1
device		fd2	at fdc0 drive 2
device		fd3	at fdc0 drive 3

# IDE controller and disks
controller	wdc0	at isa? port IO_WD1 irq 9
device		wd0	at wdc0 drive 0
#device		wd1	at wdc0 drive 1
#device		wd2	at wdc0 drive 2
#device		wd3	at wdc0 drive 3

# ATAPI devices on wdc?
device		wcd0		#IDE CD-ROM
#device		wfd0		#IDE Floppy (e.g. LS-120)
#device		wst0		#IDE Tape (e.g. Travan)

# SCSI Controllers
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
controller	ncr0		# NCR/Symbios Logic
controller	ahc0		# AHA2940 and onboard AIC7xxx devices
controller	amd0		# AMD 53C974 (Teckram DC-390(T))
controller	isp0		# Qlogic family
controller	adv0

#
# WD33C93 SCSI card (55/92 like board)
#

options	BS_TARG_SAFEMODE

# PC-9801-92
controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0
# SC-98
# controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x10000
# HA-55BS2 and later
#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x20000
# ELECOM type
#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x30000
# SMIT
#controller bs0 at isa? port IO_SCSI irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000
# Logitec LHA-20x
#controller bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000

# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
controller	scbus0		# SCSI bus (required)
device		da0		# Direct Access (disks)
device		sa0		# Sequential Access (tape etc)
device		cd0		# CD
device		pass0		# Passthrough device (direct SCSI access)

# Proprietary or custom CD-ROM Interfaces
device		matcd0	at isa? port?

# keyboard driver
device		pckbd0	at isa? port IO_KBD irq 1
#options 	KBD_INSTALL_CDEV

device		gdc0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa?

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 8

# Power management support (see LINT for more options)
device		apm0    at nexus? disable flags 0x31 # Advanced Power Management

# PCCARD (PCMCIA) support
#controller	card0
#device		pcic0	at isa?
#device		pcic1	at isa?

# Serial (COM) ports
#
options 	COM_MULTIPORT
#
# COM1
device		sio0	at isa? port IO_COM1 irq 4
# COM2 (2nd CCU)
device		sio1	at isa? port 0x238 irq 5 flags 0x12000000
# PC-9861K, PC-9801-101, MDC-926Rs
#device		sio1	at isa? port IO_COM2 irq 5 flags 0x01000000
#device		sio2	at isa? port IO_COM3 irq 6 flags 0x02000000
# PC-9801-120 (PnP off)
#device		sio1	at isa? port 0x8b0 irq 5 flags 0x11000000
# MC-16550II, MC-RS98
#device		sio1	at isa? port 0xd2 irq 5 flags 0x14000101
#device		sio2	at isa? port 0x8d2 flags 0x14000101
# RSB-2000, RSB-3000, B98-02
#device		sio1	at isa? port 0xb0 flags 0x15000101
#device		sio2	at isa? port 0xb1 flags 0x15000101
# RSB-384
#device		sio1	at isa? port 0xb0 flags 0x16000000
#device		sio2	at isa? port 0xb1 flags 0x16000000
# RSA-98III
#device		sio1	at isa? port 0x50e0 irq 5 flags 0x18000101
#device		sio2	at isa? port 0x51e0 flags 0x18000101
# ESP98
#options 	COM_ESP
#device		sio1	at isa? port 0x18b0 irq 5 flags 0x19000000

device		mse0	at isa? port IO_MSE irq 13

# NEW Parallel port
device		ppc0	at isa? port? irq 14
controller	ppbus0		# Parallel port bus (required)
device		lpt0		# Printer
device		plip0		# TCP/IP over parallel
device		ppi0		# Parallel port interface device
#controller	vpo0		# Requires scbus and da0
# OLD Parallel port
# Please stay olpt driver after ppc driver
device		olpt0	at isa? port IO_LPT


# PCI Ethernet NICs.
device		ax0		# ASIX AX88140A
device		de0		# DEC/Intel DC21x4x (``Tulip'')
device		fxp0		# Intel EtherExpress PRO/100B (82557, 82558)
device		pn0		# Lite-On 82c168/82c169 (``PNIC'')
device		tx0		# SMC 9432TX (83c170 ``EPIC'')
device		vx0		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
controller	miibus0		# MII bus support
device		al0		# ADMtek AL981/AN985 (``Comet''/``Centaur'')
device		dm0		# Davicom DM9100/DM9102
device		mx0		# Macronix 98713/98715/98725 (``PMAC'')
device		rl0		# RealTek 8129/8139
device		sf0		# Adaptec AIC-6915 (``Starfire'')
device		sis0		# Silicon Integrated Systems SiS 900/SiS 7016
device		ste0		# Sundance ST201 (D-Link DFE-550TX)
device		tl0		# Texas Instruments ThunderLAN
device		vr0		# VIA Rhine, Rhine II
device		wb0		# Winbond W89C840F
device		xl0		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
#
# DP8390 NIC
#
# ed0: generic driver
# ed1: LANEED LD-BDN
# ed2: EGY-98
# ed3: LGY-98
# ed4: ICM-IF-2766/EN-2298-T
# ed5: SIC-98
# ed6: PC-9801-108
# ed7: LA-98
# ed8: C-NET(98)
# ed9: C-NET(98)E/L
#
# MB86960A NIC
#
# fe0: RE1000/1000Plus/AccessPC N98C+/LAC-98
# fe1: C-NET(98)P2/C-NET(9N)E
#
# FE_8BIT_SUPPORT is needed to support LAC-98
#
#device ed0 at isa? port 0x00d0 irq 6
#device ed5 at isa? port 0x00d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000
#device ed1 at isa? port 0x00d8 irq 6 flags 0x200000
#device ed3 at isa? port 0x00d0 irq 6 flags 0x400000
#device ed4 at isa? port 0x56d0 irq 5 flags 0x500000
#device ed2 at isa? port 0x00d8 irq 6 flags 0x300000
#device ed7 at isa? port 0x00d0 irq 6 flags 0x900000
#device ed6 at isa? port 0x0770 irq 6 flags 0x800000
#device ed9 at isa? port 0x03d0 irq 6 flags 0xb00000
#device ed8 at isa? port 0xa3d0 irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000
device ep0 at isa? port 0x40d0 irq 3
device fe0 at isa? port 0x00d0 irq 3
device fe1 at isa? port 0x73d0 irq 5
device lnc0 at isa? port 0x03d0 irq 6

options 	FE_8BIT_SUPPORT		# LAC-98 support

# PCCARD NIC drivers.
# ze and zp take over the pcic and cannot coexist with generic pccard
# support, nor the ed and ep drivers they replace.
#device		zp0	at isa? port 0x00d0 irq 10 iomem 0xe0000

#controller	snd0
#device	sb0	at isa? port 0x20d2 irq 10 conflicts drq 3
#device	sbxvi0 	at isa? drq 3
#device	sbmidi0	at isa? port 0x80d2
#device	opl0	at isa? port 0x28d2
#device	nss0	at isa? port 0xa460 irq 12
#device	mss0	at isa? port 0xf40 irq 12 drq 1
#device	mpu0	at isa? port 0xe0d0 irq 6

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	gzip		# Exec gzipped a.out's

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

#pseudo-device	compat_atdisk	#IBM-PC HDD support