/* * Device probe and attach routines for the following * Advanced Systems Inc. SCSI controllers: * * Single Channel Products: * ABP742 - Bus-Master EISA (240 CDB) * * Dual Channel Products: * ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel) * * Copyright (c) 1997 Justin Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: adv_eisa.c,v 1.4 1999/05/08 21:59:16 dfr Exp $ */ #include "eisa.h" #if NEISA > 0 #include #include #include #include #include #include #include #include #include #include #include #define EISA_DEVICE_ID_ADVANSYS_740 0x04507400 #define EISA_DEVICE_ID_ADVANSYS_750 0x04507500 #define ADV_EISA_SLOT_OFFSET 0xc00 #define ADV_EISA_OFFSET_CHAN1 0x30 #define ADV_EISA_OFFSET_CHAN2 0x50 #define ADV_EISA_IOSIZE 0x100 #define ADV_EISA_ROM_BIOS_ADDR_REG 0x86 #define ADV_EISA_IRQ_BURST_LEN_REG 0x87 #define ADV_EISA_IRQ_MASK 0x07 #define ADV_EISA_IRQ_10 0x00 #define ADV_EISA_IRQ_11 0x01 #define ADV_EISA_IRQ_12 0x02 #define ADV_EISA_IRQ_14 0x04 #define ADV_EISA_IRQ_15 0x05 #define ADV_EISA_MAX_DMA_ADDR (0x07FFFFFFL) #define ADV_EISA_MAX_DMA_COUNT (0x07FFFFFFL) /* * The overrun buffer shared amongst all EISA adapters. */ static u_int8_t* overrun_buf; static bus_dma_tag_t overrun_dmat; static bus_dmamap_t overrun_dmamap; static bus_addr_t overrun_physbase; static const char *adveisamatch(eisa_id_t type); static const char* adveisamatch(eisa_id_t type) { switch (type & ~0xF) { case EISA_DEVICE_ID_ADVANSYS_740: return ("AdvanSys ABP-740/742 SCSI adapter"); break; case EISA_DEVICE_ID_ADVANSYS_750: return ("AdvanSys ABP-750/752 SCSI adapter"); break; default: break; } return (NULL); } static int adveisaprobe(device_t dev) { const char *desc; u_int32_t iobase; u_int8_t irq; desc = adveisamatch(eisa_get_id(dev)); if (!desc) return (ENXIO); device_set_desc(dev, desc); iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE) + ADV_EISA_SLOT_OFFSET; eisa_add_iospace(dev, iobase, ADV_EISA_IOSIZE, RESVADDR_NONE); irq = inb(iobase + ADV_EISA_IRQ_BURST_LEN_REG); irq &= ADV_EISA_IRQ_MASK; switch (irq) { case 0: case 1: case 2: case 4: case 5: break; default: printf("adv at slot %d: illegal " "irq setting %d\n", eisa_get_slot(dev), irq); return ENXIO; } eisa_add_intr(dev, irq + 10, EISA_TRIGGER_LEVEL); return 0; } static int adveisaattach(device_t dev) { struct adv_softc *adv; struct adv_softc *adv_b; struct resource *io; struct resource *irq; int unit = device_get_unit(dev); int rid, error; void *ih; adv_b = NULL; rid = 0; io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE); if (!io) { device_printf(dev, "No I/O space?!\n"); return ENOMEM; } rid = 0; irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (!irq) { device_printf(dev, "No irq?!\n"); bus_release_resource(dev, SYS_RES_IOPORT, 0, io); return ENOMEM; } switch (eisa_get_id(dev) & ~0xF) { case EISA_DEVICE_ID_ADVANSYS_750: adv_b = adv_alloc(unit, rman_get_bustag(io), rman_get_bushandle(io) + ADV_EISA_OFFSET_CHAN2); if (adv_b == NULL) goto bad; /* * Allocate a parent dmatag for all tags created * by the MI portions of the advansys driver */ /* XXX Should be a child of the PCI bus dma tag */ error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/0, /*boundary*/0, /*lowaddr*/ADV_EISA_MAX_DMA_ADDR, /*highaddr*/BUS_SPACE_MAXADDR, /*filter*/NULL, /*filterarg*/NULL, /*maxsize*/BUS_SPACE_MAXSIZE_32BIT, /*nsegments*/BUS_SPACE_UNRESTRICTED, /*maxsegsz*/ADV_EISA_MAX_DMA_COUNT, /*flags*/0, &adv_b->parent_dmat); if (error != 0) { printf("%s: Could not allocate DMA tag - error %d\n", adv_name(adv_b), error); adv_free(adv_b); goto bad; } adv_b->init_level++; /* FALLTHROUGH */ case EISA_DEVICE_ID_ADVANSYS_740: adv = adv_alloc(unit, rman_get_bustag(io), rman_get_bushandle(io) + ADV_EISA_OFFSET_CHAN1); if (adv == NULL) { if (adv_b != NULL) adv_free(adv_b); goto bad; } /* * Allocate a parent dmatag for all tags created * by the MI portions of the advansys driver */ /* XXX Should be a child of the PCI bus dma tag */ error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/0, /*boundary*/0, /*lowaddr*/ADV_EISA_MAX_DMA_ADDR, /*highaddr*/BUS_SPACE_MAXADDR, /*filter*/NULL, /*filterarg*/NULL, /*maxsize*/BUS_SPACE_MAXSIZE_32BIT, /*nsegments*/BUS_SPACE_UNRESTRICTED, /*maxsegsz*/ADV_EISA_MAX_DMA_COUNT, /*flags*/0, &adv->parent_dmat); if (error != 0) { printf("%s: Could not allocate DMA tag - error %d\n", adv_name(adv), error); adv_free(adv); goto bad; } adv->init_level++; break; default: printf("adveisaattach: Unknown device type!\n"); goto bad; break; } if (overrun_buf == NULL) { /* Need to allocate our overrun buffer */ if (bus_dma_tag_create(adv->parent_dmat, /*alignment*/8, /*boundary*/0, ADV_EISA_MAX_DMA_ADDR, BUS_SPACE_MAXADDR, /*filter*/NULL, /*filterarg*/NULL, ADV_OVERRUN_BSIZE, /*nsegments*/1, BUS_SPACE_MAXSIZE_32BIT, /*flags*/0, &overrun_dmat) != 0) { adv_free(adv); goto bad; } if (bus_dmamem_alloc(overrun_dmat, (void **)&overrun_buf, BUS_DMA_NOWAIT, &overrun_dmamap) != 0) { bus_dma_tag_destroy(overrun_dmat); adv_free(adv); goto bad; } /* And permanently map it in */ bus_dmamap_load(overrun_dmat, overrun_dmamap, overrun_buf, ADV_OVERRUN_BSIZE, adv_map, &overrun_physbase, /*flags*/0); } /* * Now that we know we own the resources we need, do the * card initialization. */ /* * Stop the chip. */ ADV_OUTB(adv, ADV_CHIP_CTRL, ADV_CC_HALT); ADV_OUTW(adv, ADV_CHIP_STATUS, 0); adv->chip_version = EISA_REVISION_ID(eisa_get_id(dev)) + ADV_CHIP_MIN_VER_EISA - 1; if (adv_init(adv) != 0) { adv_free(adv); if (adv_b != NULL) adv_free(adv_b); return(-1); } adv->max_dma_count = ADV_EISA_MAX_DMA_COUNT; adv->max_dma_addr = ADV_EISA_MAX_DMA_ADDR; if (adv_b != NULL) { /* * Stop the chip. */ ADV_OUTB(adv_b, ADV_CHIP_CTRL, ADV_CC_HALT); ADV_OUTW(adv_b, ADV_CHIP_STATUS, 0); adv_b->chip_version = EISA_REVISION_ID(eisa_get_id(dev)) + ADV_CHIP_MIN_VER_EISA - 1; if (adv_init(adv_b) != 0) { adv_free(adv_b); } else { adv_b->max_dma_count = ADV_EISA_MAX_DMA_COUNT; adv_b->max_dma_addr = ADV_EISA_MAX_DMA_ADDR; } } /* * Enable our interrupt handler. */ bus_setup_intr(dev, irq, INTR_TYPE_CAM, adv_intr, adv, &ih); /* Attach sub-devices - always succeeds */ adv_attach(adv); if (adv_b != NULL) adv_attach(adv_b); return 0; bad: bus_release_resource(dev, SYS_RES_IOPORT, 0, io); bus_release_resource(dev, SYS_RES_IRQ, 0, irq); return -1; } static device_method_t adv_eisa_methods[] = { /* Device interface */ DEVMETHOD(device_probe, adveisaprobe), DEVMETHOD(device_attach, adveisaattach), { 0, 0 } }; static driver_t adv_eisa_driver = { "adv", adv_eisa_methods, 1, /* unused */ }; static devclass_t adv_devclass; DRIVER_MODULE(adv, eisa, adv_eisa_driver, adv_devclass, 0, 0); #endif /* NEISA > 0 */