/* * Largely written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 * * $FreeBSD$ */ /* * SCSI general interface description */ #ifndef _SCSI_SCSI_ALL_H #define _SCSI_SCSI_ALL_H 1 #include #ifdef _KERNEL #include "opt_scsi.h" /* * This is the number of seconds we wait for devices to settle after a SCSI * bus reset. */ #ifndef SCSI_DELAY #define SCSI_DELAY 2000 #endif /* * If someone sets this to 0, we assume that they want the minimum * allowable bus settle delay. All devices need _some_ sort of bus settle * delay, so we'll set it to a minimum value of 100ms. */ #if (SCSI_DELAY == 0) #undef SCSI_DELAY #define SCSI_DELAY 100 #endif /* * Make sure the user isn't using seconds instead of milliseconds. */ #if (SCSI_DELAY < 100) #error "SCSI_DELAY is in milliseconds, not seconds! Please use a larger value" #endif #endif /* _KERNEL */ /* * SCSI command format */ /* * Define dome bits that are in ALL (or a lot of) scsi commands */ #define SCSI_CTL_LINK 0x01 #define SCSI_CTL_FLAG 0x02 #define SCSI_CTL_VENDOR 0xC0 #define SCSI_CMD_LUN 0xA0 /* these two should not be needed */ #define SCSI_CMD_LUN_SHIFT 5 /* LUN in the cmd is no longer SCSI */ #define SCSI_MAX_CDBLEN 16 /* * 16 byte commands are in the * SCSI-3 spec */ #if defined(CAM_MAX_CDBLEN) && (CAM_MAX_CDBLEN < SCSI_MAX_CDBLEN) #error "CAM_MAX_CDBLEN cannot be less than SCSI_MAX_CDBLEN" #endif /* * This type defines actions to be taken when a particular sense code is * received. Right now, these flags are only defined to take up 16 bits, * but can be expanded in the future if necessary. */ typedef enum { SS_NOP = 0x000000, /* Do nothing */ SS_RETRY = 0x010000, /* Retry the command */ SS_FAIL = 0x020000, /* Bail out */ SS_START = 0x030000, /* Send a Start Unit command to the device, * then retry the original command. */ SS_TUR = 0x040000, /* Send a Test Unit Ready command to the * device, then retry the original command. */ SS_MANUAL = 0x050000, /* * This error must be handled manually, * i.e. the code must look at the asc and * ascq values and determine the proper * course of action. */ SS_TURSTART = 0x060000, /* * Send a Test Unit Ready command to the * device, and if that fails, send a start * unit. */ SS_MASK = 0xff0000 } scsi_sense_action; typedef enum { SSQ_NONE = 0x0000, SSQ_DECREMENT_COUNT = 0x0100, /* Decrement the retry count */ SSQ_MANY = 0x0200, /* send lots of recovery commands */ SSQ_RANGE = 0x0400, /* * Yes, this is a hack. Basically, * if this flag is set then it * represents an ascq range. The * "correct" way to implement the * ranges might be to add a special * field to the sense code table, * but that would take up a lot of * additional space. This solution * isn't as elegant, but is more * space efficient. */ SSQ_PRINT_SENSE = 0x0800, SSQ_MASK = 0xff00 } scsi_sense_action_qualifier; /* Mask for error status values */ #define SS_ERRMASK 0xff /* The default error action */ #define SS_DEF SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE|EIO /* Default error action, without an error return value */ #define SS_NEDEF SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE /* Default error action, without sense printing or an error return value */ #define SS_NEPDEF SS_RETRY|SSQ_DECREMENT_COUNT struct scsi_generic { u_int8_t opcode; u_int8_t bytes[11]; }; struct scsi_request_sense { u_int8_t opcode; u_int8_t byte2; u_int8_t unused[2]; u_int8_t length; u_int8_t control; }; struct scsi_test_unit_ready { u_int8_t opcode; u_int8_t byte2; u_int8_t unused[3]; u_int8_t control; }; struct scsi_send_diag { u_int8_t opcode; u_int8_t byte2; #define SSD_UOL 0x01 #define SSD_DOL 0x02 #define SSD_SELFTEST 0x04 #define SSD_PF 0x10 u_int8_t unused[1]; u_int8_t paramlen[2]; u_int8_t control; }; struct scsi_sense { u_int8_t opcode; u_int8_t byte2; u_int8_t unused[2]; u_int8_t length; u_int8_t control; }; struct scsi_inquiry { u_int8_t opcode; u_int8_t byte2; #define SI_EVPD 0x01 u_int8_t page_code; u_int8_t reserved; u_int8_t length; u_int8_t control; }; struct scsi_mode_sense_6 { u_int8_t opcode; u_int8_t byte2; #define SMS_DBD 0x08 u_int8_t page; #define SMS_PAGE_CODE 0x3F #define SMS_VENDOR_SPECIFIC_PAGE 0x00 #define SMS_DISCONNECT_RECONNECT_PAGE 0x02 #define SMS_PERIPHERAL_DEVICE_PAGE 0x09 #define SMS_CONTROL_MODE_PAGE 0x0A #define SMS_ALL_PAGES_PAGE 0x3F #define SMS_PAGE_CTRL_MASK 0xC0 #define SMS_PAGE_CTRL_CURRENT 0x00 #define SMS_PAGE_CTRL_CHANGEABLE 0x40 #define SMS_PAGE_CTRL_DEFAULT 0x80 #define SMS_PAGE_CTRL_SAVED 0xC0 u_int8_t unused; u_int8_t length; u_int8_t control; }; struct scsi_mode_sense_10 { u_int8_t opcode; u_int8_t byte2; /* same bits as small version */ u_int8_t page; /* same bits as small version */ u_int8_t unused[4]; u_int8_t length[2]; u_int8_t control; }; struct scsi_mode_select_6 { u_int8_t opcode; u_int8_t byte2; #define SMS_SP 0x01 #define SMS_PF 0x10 u_int8_t unused[2]; u_int8_t length; u_int8_t control; }; struct scsi_mode_select_10 { u_int8_t opcode; u_int8_t byte2; /* same bits as small version */ u_int8_t unused[5]; u_int8_t length[2]; u_int8_t control; }; /* * When sending a mode select to a tape drive, the medium type must be 0. */ struct scsi_mode_hdr_6 { u_int8_t datalen; u_int8_t medium_type; u_int8_t dev_specific; u_int8_t block_descr_len; }; struct scsi_mode_hdr_10 { u_int8_t datalen[2]; u_int8_t medium_type; u_int8_t dev_specific; u_int8_t reserved[2]; u_int8_t block_descr_len[2]; }; struct scsi_mode_block_descr { u_int8_t density_code; u_int8_t num_blocks[3]; u_int8_t reserved; u_int8_t block_len[3]; }; struct scsi_control_page { u_int8_t page_code; u_int8_t page_length; u_int8_t rlec; #define SCB_RLEC 0x01 /*Report Log Exception Cond*/ u_int8_t queue_flags; #define SCP_QUEUE_ALG_MASK 0xF0 #define SCP_QUEUE_ALG_RESTRICTED 0x00 #define SCP_QUEUE_ALG_UNRESTRICTED 0x10 #define SCP_QUEUE_ERR 0x02 /*Queued I/O aborted for CACs*/ #define SCP_QUEUE_DQUE 0x01 /*Queued I/O disabled*/ u_int8_t eca_and_aen; #define SCP_EECA 0x80 /*Enable Extended CA*/ #define SCP_RAENP 0x04 /*Ready AEN Permission*/ #define SCP_UAAENP 0x02 /*UA AEN Permission*/ #define SCP_EAENP 0x01 /*Error AEN Permission*/ u_int8_t reserved; u_int8_t aen_holdoff_period[2]; }; struct scsi_reserve { u_int8_t opcode; u_int8_t byte2; u_int8_t unused[2]; u_int8_t length; u_int8_t control; }; struct scsi_release { u_int8_t opcode; u_int8_t byte2; u_int8_t unused[2]; u_int8_t length; u_int8_t control; }; struct scsi_prevent { u_int8_t opcode; u_int8_t byte2; u_int8_t unused[2]; u_int8_t how; u_int8_t control; }; #define PR_PREVENT 0x01 #define PR_ALLOW 0x00 struct scsi_sync_cache { u_int8_t opcode; u_int8_t byte2; u_int8_t begin_lba[4]; u_int8_t reserved; u_int8_t lb_count[2]; u_int8_t control; }; struct scsi_changedef { u_int8_t opcode; u_int8_t byte2; u_int8_t unused1; u_int8_t how; u_int8_t unused[4]; u_int8_t datalen; u_int8_t control; }; struct scsi_read_buffer { u_int8_t opcode; u_int8_t byte2; #define RWB_MODE 0x07 #define RWB_MODE_HDR_DATA 0x00 #define RWB_MODE_DATA 0x02 #define RWB_MODE_DOWNLOAD 0x04 #define RWB_MODE_DOWNLOAD_SAVE 0x05 u_int8_t buffer_id; u_int8_t offset[3]; u_int8_t length[3]; u_int8_t control; }; struct scsi_write_buffer { u_int8_t opcode; u_int8_t byte2; u_int8_t buffer_id; u_int8_t offset[3]; u_int8_t length[3]; u_int8_t control; }; struct scsi_rw_6 { u_int8_t opcode; u_int8_t addr[3]; /* only 5 bits are valid in the MSB address byte */ #define SRW_TOPADDR 0x1F u_int8_t length; u_int8_t control; }; struct scsi_rw_10 { u_int8_t opcode; #define SRW10_RELADDR 0x01 #define SRW10_FUA 0x08 #define SRW10_DPO 0x10 u_int8_t byte2; u_int8_t addr[4]; u_int8_t reserved; u_int8_t length[2]; u_int8_t control; }; struct scsi_rw_12 { u_int8_t opcode; #define SRW12_RELADDR 0x01 #define SRW12_FUA 0x08 #define SRW12_DPO 0x10 u_int8_t byte2; u_int8_t addr[4]; u_int8_t reserved; u_int8_t length[4]; u_int8_t control; }; struct scsi_start_stop_unit { u_int8_t opcode; u_int8_t byte2; #define SSS_IMMED 0x01 u_int8_t reserved[2]; u_int8_t how; #define SSS_START 0x01 #define SSS_LOEJ 0x02 u_int8_t control; }; #define SC_SCSI_1 0x01 #define SC_SCSI_2 0x03 /* * Opcodes */ #define TEST_UNIT_READY 0x00 #define REQUEST_SENSE 0x03 #define READ_6 0x08 #define WRITE_6 0x0a #define INQUIRY 0x12 #define MODE_SELECT_6 0x15 #define MODE_SENSE_6 0x1a #define START_STOP_UNIT 0x1b #define START_STOP 0x1b #define RESERVE 0x16 #define RELEASE 0x17 #define RECEIVE_DIAGNOSTIC 0x1c #define SEND_DIAGNOSTIC 0x1d #define PREVENT_ALLOW 0x1e #define READ_CAPACITY 0x25 #define READ_10 0x28 #define WRITE_10 0x2a #define POSITION_TO_ELEMENT 0x2b #define SYNCHRONIZE_CACHE 0x35 #define WRITE_BUFFER 0x3b #define READ_BUFFER 0x3c #define CHANGE_DEFINITION 0x40 #define MODE_SELECT_10 0x55 #define MODE_SENSE_10 0x5A #define MOVE_MEDIUM 0xa5 #define READ_12 0xa8 #define WRITE_12 0xaa #define READ_ELEMENT_STATUS 0xb8 /* * Device Types */ #define T_DIRECT 0x00 #define T_SEQUENTIAL 0x01 #define T_PRINTER 0x02 #define T_PROCESSOR 0x03 #define T_WORM 0x04 #define T_CDROM 0x05 #define T_SCANNER 0x06 #define T_OPTICAL 0x07 #define T_CHANGER 0x08 #define T_COMM 0x09 #define T_ASC0 0x0a #define T_ASC1 0x0b #define T_STORARRAY 0x0c #define T_ENCLOSURE 0x0d #define T_NODEVICE 0x1F #define T_ANY 0xFF /* Used in Quirk table matches */ #define T_REMOV 1 #define T_FIXED 0 struct scsi_inquiry_data { u_int8_t device; #define SID_TYPE(inq_data) ((inq_data)->device & 0x1f) #define SID_QUAL(inq_data) (((inq_data)->device & 0xE0) >> 5) #define SID_QUAL_LU_CONNECTED 0x00 /* The specified peripheral device * type is currently connected to * logical unit. If the target cannot * determine whether or not a physical * device is currently connected, it * shall also use this peripheral * qualifier when returning the INQUIRY * data. This peripheral qualifier * does not mean that the device is * ready for access by the initiator. */ #define SID_QUAL_LU_OFFLINE 0x01 /* The target is capable of supporting * the specified peripheral device type * on this logical unit; however, the * physical device is not currently * connected to this logical unit. */ #define SID_QUAL_RSVD 0x02 #define SID_QUAL_BAD_LU 0x03 /* The target is not capable of * supporting a physical device on * this logical unit. For this * peripheral qualifier the peripheral * device type shall be set to 1Fh to * provide compatibility with previous * versions of SCSI. All other * peripheral device type values are * reserved for this peripheral * qualifier. */ #define SID_QUAL_IS_VENDOR_UNIQUE(inq_data) ((SID_QUAL(inq_data) & 0x08) != 0) u_int8_t dev_qual2; #define SID_QUAL2 0x7F #define SID_IS_REMOVABLE(inq_data) (((inq_data)->dev_qual2 & 0x80) != 0) u_int8_t version; #define SID_ANSI_REV(inq_data) ((inq_data)->version & 0x07) #define SCSI_REV_0 0 #define SCSI_REV_CCS 1 #define SCSI_REV_2 2 #define SCSI_REV_3 3 #define SID_ECMA 0x38 #define SID_ISO 0xC0 u_int8_t response_format; #define SID_AENC 0x80 #define SID_TrmIOP 0x40 u_int8_t additional_length; u_int8_t reserved[2]; u_int8_t flags; #define SID_SftRe 0x01 #define SID_CmdQue 0x02 #define SID_Linked 0x08 #define SID_Sync 0x10 #define SID_WBus16 0x20 #define SID_WBus32 0x40 #define SID_RelAdr 0x80 #define SID_VENDOR_SIZE 8 char vendor[SID_VENDOR_SIZE]; #define SID_PRODUCT_SIZE 16 char product[SID_PRODUCT_SIZE]; #define SID_REVISION_SIZE 4 char revision[SID_REVISION_SIZE]; }; struct scsi_vpd_unit_serial_number { u_int8_t device; u_int8_t page_code; #define SVPD_UNIT_SERIAL_NUMBER 0x80 u_int8_t reserved; u_int8_t length; /* serial number length */ #define SVPD_SERIAL_NUM_SIZE 251 char serial_num[SVPD_SERIAL_NUM_SIZE]; }; struct scsi_read_capacity { u_int8_t opcode; u_int8_t byte2; u_int8_t addr[4]; u_int8_t unused[3]; u_int8_t control; }; struct scsi_read_capacity_data { u_int8_t addr[4]; u_int8_t length[4]; }; struct scsi_sense_data { u_int8_t error_code; #define SSD_ERRCODE 0x7F #define SSD_CURRENT_ERROR 0x70 #define SSD_DEFERRED_ERROR 0x71 #define SSD_ERRCODE_VALID 0x80 u_int8_t segment; u_int8_t flags; #define SSD_KEY 0x0F #define SSD_KEY_NO_SENSE 0x00 #define SSD_KEY_RECOVERED_ERROR 0x01 #define SSD_KEY_NOT_READY 0x02 #define SSD_KEY_MEDIUM_ERROR 0x03 #define SSD_KEY_HARDWARE_ERROR 0x04 #define SSD_KEY_ILLEGAL_REQUEST 0x05 #define SSD_KEY_UNIT_ATTENTION 0x06 #define SSD_KEY_DATA_PROTECT 0x07 #define SSD_KEY_BLANK_CHECK 0x08 #define SSD_KEY_Vendor_Specific 0x09 #define SSD_KEY_COPY_ABORTED 0x0a #define SSD_KEY_ABORTED_COMMAND 0x0b #define SSD_KEY_EQUAL 0x0c #define SSD_KEY_VOLUME_OVERFLOW 0x0d #define SSD_KEY_MISCOMPARE 0x0e #define SSD_KEY_RESERVED 0x0f #define SSD_ILI 0x20 #define SSD_EOM 0x40 #define SSD_FILEMARK 0x80 u_int8_t info[4]; u_int8_t extra_len; u_int8_t cmd_spec_info[4]; u_int8_t add_sense_code; u_int8_t add_sense_code_qual; u_int8_t fru; u_int8_t sense_key_spec[3]; #define SSD_SCS_VALID 0x80 #define SSD_FIELDPTR_CMD 0x40 #define SSD_BITPTR_VALID 0x08 #define SSD_BITPTR_VALUE 0x07 #define SSD_MIN_SIZE 18 u_int8_t extra_bytes[14]; #define SSD_FULL_SIZE sizeof(struct scsi_sense_data) }; struct scsi_mode_header_6 { u_int8_t data_length; /* Sense data length */ u_int8_t medium_type; u_int8_t dev_spec; u_int8_t blk_desc_len; }; struct scsi_mode_header_10 { u_int8_t data_length[2];/* Sense data length */ u_int8_t medium_type; u_int8_t dev_spec; u_int8_t unused[2]; u_int8_t blk_desc_len[2]; }; struct scsi_mode_blk_desc { u_int8_t density; u_int8_t nblocks[3]; u_int8_t reserved; u_int8_t blklen[3]; }; #define SCSI_DEFAULT_DENSITY 0x00 /* use 'default' density */ #define SCSI_SAME_DENSITY 0x7f /* use 'same' density- >= SCSI-2 only */ /* * Status Byte */ #define SCSI_STATUS_OK 0x00 #define SCSI_STATUS_CHECK_COND 0x02 #define SCSI_STATUS_COND_MET 0x04 #define SCSI_STATUS_BUSY 0x08 #define SCSI_STATUS_INTERMED 0x10 #define SCSI_STATUS_INTERMED_COND_MET 0x14 #define SCSI_STATUS_RESERV_CONFLICT 0x18 #define SCSI_STATUS_CMD_TERMINATED 0x22 #define SCSI_STATUS_QUEUE_FULL 0x28 struct scsi_inquiry_pattern { u_int8_t type; u_int8_t media_type; #define SIP_MEDIA_REMOVABLE 0x01 #define SIP_MEDIA_FIXED 0x02 const char *vendor; const char *product; const char *revision; }; struct scsi_static_inquiry_pattern { u_int8_t type; u_int8_t media_type; char vendor[SID_VENDOR_SIZE+1]; char product[SID_PRODUCT_SIZE+1]; char revision[SID_REVISION_SIZE+1]; }; struct scsi_sense_quirk_entry { struct scsi_inquiry_pattern inq_pat; int num_ascs; struct asc_table_entry *asc_info; }; struct asc_table_entry { u_int8_t asc; u_int8_t ascq; u_int32_t action; #if !defined(SCSI_NO_SENSE_STRINGS) const char *desc; #endif }; struct op_table_entry { u_int8_t opcode; u_int16_t opmask; const char *desc; }; struct scsi_op_quirk_entry { struct scsi_inquiry_pattern inq_pat; int num_ops; struct op_table_entry *op_table; }; struct ccb_scsiio; struct cam_periph; union ccb; #ifndef _KERNEL struct cam_device; #endif extern const char *scsi_sense_key_text[]; __BEGIN_DECLS const char * scsi_sense_desc(int asc, int ascq, struct scsi_inquiry_data *inq_data); scsi_sense_action scsi_error_action(int asc, int ascq, struct scsi_inquiry_data *inq_data); #ifdef _KERNEL void scsi_sense_print(struct ccb_scsiio *csio); int scsi_interpret_sense(union ccb *ccb, u_int32_t sense_flags, u_int32_t *relsim_flags, u_int32_t *reduction, u_int32_t *timeout, scsi_sense_action error_action); #else char * scsi_sense_string(struct cam_device *device, struct ccb_scsiio *csio, char *str, int str_len); void scsi_sense_print(struct cam_device *device, struct ccb_scsiio *csio, FILE *ofile); int scsi_interpret_sense(struct cam_device *device, union ccb *ccb, u_int32_t sense_flags, u_int32_t *relsim_flags, u_int32_t *reduction, u_int32_t *timeout, scsi_sense_action error_action); #endif /* _KERNEL */ #define SF_RETRY_UA 0x01 #define SF_NO_PRINT 0x02 #define SF_QUIET_IR 0x04 /* Be quiet about Illegal Request reponses */ #define SF_PRINT_ALWAYS 0x08 #define SF_RETRY_SELTO 0x10 /* Retry selection timeouts */ const char * scsi_op_desc(u_int16_t opcode, struct scsi_inquiry_data *inq_data); char * scsi_cdb_string(u_int8_t *cdb_ptr, char *cdb_string, size_t len); void scsi_print_inquiry(struct scsi_inquiry_data *inq_data); u_int scsi_calc_syncsrate(u_int period_factor); u_int scsi_calc_syncparam(u_int period); void scsi_test_unit_ready(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, u_int8_t sense_len, u_int32_t timeout); void scsi_request_sense(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), void *data_ptr, u_int8_t dxfer_len, u_int8_t tag_action, u_int8_t sense_len, u_int32_t timeout); void scsi_inquiry(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, u_int8_t *inq_buf, u_int32_t inq_len, int evpd, u_int8_t page_code, u_int8_t sense_len, u_int32_t timeout); void scsi_mode_sense(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, int dbd, u_int8_t page_code, u_int8_t page, u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len, u_int32_t timeout); void scsi_mode_select(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, int scsi_page_fmt, int save_pages, u_int8_t *param_buf, u_int32_t param_len, u_int8_t sense_len, u_int32_t timeout); void scsi_read_capacity(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, struct scsi_read_capacity_data *rcap_buf, u_int8_t sense_len, u_int32_t timeout); void scsi_prevent(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, u_int8_t action, u_int8_t sense_len, u_int32_t timeout); void scsi_synchronize_cache(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, u_int32_t begin_lba, u_int16_t lb_count, u_int8_t sense_len, u_int32_t timeout); void scsi_read_write(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, int readop, u_int8_t byte2, int minimum_cmd_size, u_int32_t lba, u_int32_t block_count, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, u_int32_t timeout); void scsi_start_stop(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, int start, int load_eject, int immediate, u_int8_t sense_len, u_int32_t timeout); int scsi_inquiry_match(caddr_t inqbuffer, caddr_t table_entry); int scsi_static_inquiry_match(caddr_t inqbuffer, caddr_t table_entry); static __inline void scsi_extract_sense(struct scsi_sense_data *sense, int *error_code, int *sense_key, int *asc, int *ascq); static __inline void scsi_ulto2b(u_int32_t val, u_int8_t *bytes); static __inline void scsi_ulto3b(u_int32_t val, u_int8_t *bytes); static __inline void scsi_ulto4b(u_int32_t val, u_int8_t *bytes); static __inline u_int32_t scsi_2btoul(u_int8_t *bytes); static __inline u_int32_t scsi_3btoul(u_int8_t *bytes); static __inline int32_t scsi_3btol(u_int8_t *bytes); static __inline u_int32_t scsi_4btoul(u_int8_t *bytes); static __inline void *find_mode_page_6(struct scsi_mode_header_6 *mode_header); static __inline void *find_mode_page_10(struct scsi_mode_header_10 *mode_header); static __inline void scsi_extract_sense(struct scsi_sense_data *sense, int *error_code, int *sense_key, int *asc, int *ascq) { *error_code = sense->error_code & SSD_ERRCODE; *sense_key = sense->flags & SSD_KEY; *asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0; *ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0; } static __inline void scsi_ulto2b(u_int32_t val, u_int8_t *bytes) { bytes[0] = (val >> 8) & 0xff; bytes[1] = val & 0xff; } static __inline void scsi_ulto3b(u_int32_t val, u_int8_t *bytes) { bytes[0] = (val >> 16) & 0xff; bytes[1] = (val >> 8) & 0xff; bytes[2] = val & 0xff; } static __inline void scsi_ulto4b(u_int32_t val, u_int8_t *bytes) { bytes[0] = (val >> 24) & 0xff; bytes[1] = (val >> 16) & 0xff; bytes[2] = (val >> 8) & 0xff; bytes[3] = val & 0xff; } static __inline u_int32_t scsi_2btoul(u_int8_t *bytes) { u_int32_t rv; rv = (bytes[0] << 8) | bytes[1]; return (rv); } static __inline u_int32_t scsi_3btoul(u_int8_t *bytes) { u_int32_t rv; rv = (bytes[0] << 16) | (bytes[1] << 8) | bytes[2]; return (rv); } static __inline int32_t scsi_3btol(u_int8_t *bytes) { u_int32_t rc = scsi_3btoul(bytes); if (rc & 0x00800000) rc |= 0xff000000; return (int32_t) rc; } static __inline u_int32_t scsi_4btoul(u_int8_t *bytes) { u_int32_t rv; rv = (bytes[0] << 24) | (bytes[1] << 16) | (bytes[2] << 8) | bytes[3]; return (rv); } /* * Given the pointer to a returned mode sense buffer, return a pointer to * the start of the first mode page. */ static __inline void * find_mode_page_6(struct scsi_mode_header_6 *mode_header) { void *page_start; page_start = (void *)((u_int8_t *)&mode_header[1] + mode_header->blk_desc_len); return(page_start); } static __inline void * find_mode_page_10(struct scsi_mode_header_10 *mode_header) { void *page_start; page_start = (void *)((u_int8_t *)&mode_header[1] + scsi_2btoul(mode_header->blk_desc_len)); return(page_start); } __END_DECLS #endif /*_SCSI_SCSI_ALL_H*/