# # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC98,v 1.20 1997/04/08 12:01:11 kato Exp $ # GENERIC98 -- Generic PC98 machine with WD/SCSI disks machine "pc98" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident "GENERIC98" maxusers 10 options "PC98" #PC98 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options EPSON_BOUNCEDMA #use bounce buufer for 15-16M #options EPSON_MEMWIN #EPSON memory window support options UCONSOLE #Allow users to grab the console options "LINE30" options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SYSVSHM options SYSVSEM options SYSVMSG options AUTO_CLOCK options COM_MULTIPORT # # non-Intel CPU support # #options "IBM_486SLC" # IBM486SLC/SLC2 support #options "CYRIX_486DLC" # Cyrix 486DLC/SLC/DLC2/SLC2 support #options "CYRIX_5X86" # Cyrix 5x86 support #options SUSP_HLT # CPU enters suspend mode when HALT #options "DISABLE_5X86_LSSER" # Load-Store reordering enable # # IBM-PC HDD support #options COMPAT_ATDISK # # FreeBSD(98)-current is a *TEST VERSION*. # It is highly recomended to compile with following options, and to # record the panic messages and the result of trace command brefore # reporting a problem. options DDB options DIAGNOSTIC config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 11 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 disk fd2 at fdc0 drive 2 disk fd3 at fdc0 drive 3 tape ft0 at fdc0 drive 4 # options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 9 vector wdintr disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #disk wd2 at wdc0 drive 2 #disk wd3 at wdc0 drive 3 options ATAPI # Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc) is sufficient # for any number of installed devices. controller ncr0 controller ahc0 # # WD33C93 SCSI card (55/92 like board) # options BS_TARG_SAFEMODE # PC-9801-92 controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0 vector bsintr # SC-98 # controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x10000 vector bsintr # HA-55BS2 and later #controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x20000 vector bsintr # ELECOM type #controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x30000 vector bsintr # SMIT #controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 iomem 0xdc000 iosiz 0x1000 flags 0x40000 vector bsintr # Logitec LHA-20x #controller bs0 at isa? port "IO_SCSI" bio irq 5 drq 3 flags 0x50000 vector bsintr controller aic0 at isa? port 0x1840 bio irq 5 flags 0x10000 vector aicintr controller scbus0 device sd0 device od0 #See LINT for possible `od' options. device st0 device cd0 #Only need one of these, the code dynamically grows controller matcd0 at isa? port? bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr #options XSERVER # support for X server device npx0 at isa? port "IO_NPX" irq 8 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller crd0 #device pcic0 at crd? #device pcic1 at crd? device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port 0xd2 tty irq 5 flags 0x101 vector siointr device sio2 at isa? port 0x8d2 tty flags 0x101 vector siointr device lpt0 at isa? port "IO_LPT" tty device mse0 at isa? port "IO_MSE" tty irq 13 vector mseintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 device fxp0 device vx0 device lnc0 # # DP8390 NIC # # ed0: generic driver # ed1: LANEED LD-BDN # ed2: EGY-98 # ed3: LGY-98 # ed4: ICM-IF-2766/EN-2298-T # ed5: SIC-98 # ed6: PC-9801-108 # ed7: LA-98 # ed8: C-NET(98) # ed9: C-NET(98)E/L # device ed0 at isa? port 0x00d0 net irq 6 vector edintr device ed1 at isa? port 0x00d8 net irq 6 flags 0x200000 vector edintr device ed2 at isa? port 0x00d8 net irq 6 flags 0x300000 vector edintr device ed3 at isa? port 0x00d0 net irq 6 flags 0x400000 vector edintr device ed4 at isa? port 0x56d0 net irq 5 flags 0x500000 vector edintr device ed5 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 vector edintr device ed6 at isa? port 0x00d0 net irq 6 flags 0x800000 vector edintr device ed7 at isa? port 0x00d0 net irq 6 flags 0x900000 vector edintr device ed8 at isa? port 0x03d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 vector edintr device ed9 at isa? port 0x03d0 net irq 6 flags 0xb00000 vector edintr device ep0 at isa? port 0x40d0 net irq 3 vector epintr device fe0 at isa? port 0x00d0 net irq 3 vector feintr device zp0 at isa? port 0x00d0 net irq 10 iomem 0xe0000 vector zpintr #controller snd0 #device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 vector sbintr #device sbxvi0 at isa? drq 3 #device sbmidi0 at isa? port 0x80d2 #device opl0 at isa? port 0x28d2 #device pcm0 at isa? port 0xa460 irq 12 vector pcmintr #device mss0 at isa? port 0xf40 irq 12 drq 1 vector adintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 2 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing