#!/bin/sh # # This is sysconfig - a file full of useful variables that you can set # to change the default startup behavior of your system. # # $Id$ ######################### Start Of Local Configuration Section ########### # Location of local startup directories. local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" ######################### End Of Local Configuration Section ############# ######################### Start Of Syscons Section ####################### # Choose keyboard map from /usr/share/syscons/keymaps/* or NO if default. keymap=NO # Set keyboard rate to: slow, normal, fast or NO if default. keyrate=NO # Change function keys default values (or no change if NO) # Syntax: " [ ]..." keychange=NO # Desired cursor type {normal|blink|destructive}, NO if no change cursor=NO # Desired bell type {duration.pitch|normal|visual}, NO if no change keybell=NO # Choose screen map from /usr/share/syscons/scrnmaps/* (or NO for none) scrnmap=NO # Choose font 8x16 from /usr/share/syscons/fonts/* (or NO for default) font8x16=NO # Choose font 8x14 from /usr/share/syscons/fonts/* (or NO for default) font8x14=NO # Choose font 8x8 from /usr/share/syscons/fonts/* (or NO for default) font8x8=NO # Set blank time (in seconds) or "off" to turn it off (or NO for default) blanktime=NO # Set to screen saver desired: blank, green, snake, star (or NO for none) saver=NO # Set to # {microsoft|mousesystems|mmseries|logitech|busmouse|mouseman|ps/2|mmhittab} # to activate system mouse cursor support (or NO for none) # Use 'vidcontrol -m on' command to activate it on particular screen mousedtype=NO ############## Next block activated only if mousedtype != NO ################ # Set to your mouse port (required) # Use real device here, because /dev/mouse usually linked with /dev/sysmouse mousedport=/dev/cuaa0 # Moused options: # -s: 9600 baud mouse # -c: enable ChordMiddle # see moused usage info for complete options list mousedflags="" ######################### End of moused block ############################## # General Russian setup for example: # (koi8-r keyboard with cp866 screen font mapped to koi8-r) # # keymap=ru.koi8-r # keyrate=fast # keychange="61 " # cursor=destructive # scrnmap=koi8-r2cp866 # font8x16=cp866b-8x16 # font8x14=cp866-8x14 # font8x8=cp866-8x8 # blanktime=600 # saver=snake # mousedtype=mousesystems # mousedport=/dev/cuaa0 # mousedflags="" ######################### End Of Syscons Section ####################### ######################### Start Of Netconfig Section ####################### # Set to the name of your host - this is pretty important! hostname=myname.my.domain # Set to the NIS domainname of your host, or NO if none defaultdomainname=NO # # Some broken implementations can't handle the RFC 1323 and RFC 1644 # TCP options. If TCP connections randomly hang, try disabling this, # and bug the vendor of the losing equipment. # tcp_extensions=YES # If you're running PCNFSD or anything else which requires mountd to allow # non-root requests for NFS mounts, set this to YES. weak_mountd_authentication=NO # # Set to the list of network devices on this host. You must have an # ifconfig_${network_interface} line for each interface listed here. # Extra addresses may be specified with sequentual _alias lines. IPX # addresses may be specified with an ifconfig_${network_interface}_ipx # line. # # for example: # # network_interfaces="ed0 sl0 lo0" # # ifconfig_ed0="inet 10.0.0.1 netmask 0xffffff00" # ifconfig_sl0="inet 10.0.1.0 netmask 0xffffff00" # ifconfig_lo0="inet 127.0.0.1" # ifconfig_ed0_alias0="inet 10.0.2.1 netmask 0xffffff00" # ifconfig_ed0_alias1="inet 10.0.2.2 netmask 0xffffffff" # ifconfig_ed0_ipx="ipx 0x1234" # # Alternatively, /etc/start_if.${network_interface} is run if it exists. # This script can be used as an alternative to the ifconfig_ lines. # network_interfaces="lo0" ifconfig_lo0="inet 127.0.0.1" # # Set to the list of route add lines for this host. You must have a # route_${static_routes} line for each static route listed here (unless # static_routes is set to "" - do NOT use ``NO'' to denote a lack of static # routes!). # #static_routes="foo multicast" #route_foo="woofo woofo-gw" #route_multicast="224.0.0.0 -netmask 0xf0000000 -interface 10.0.0.1" static_routes="" # Set to the host you'd like set as your default router, or NO for none. # This is the same as adding a ``default'' entry to static_routes. defaultrouter=NO # This is the routing daemon you want to use. Possible options are # currently NO (for none), `routed' and `gated'. Also see `routerflags' # for startup flags. router=routed # These are the flags you'd like to start the routing daemon with routerflags=-q # mrouted flags, or NO if you don't want to start mrouted. Needs kernel # options enabled before it will work. mrouted=NO # YES will switch routing on in the kernel. You need to switch this on # if this machine has to act as a IPX router. You need to build a # kernel with IPX support for this to work. ipxgateway=NO # IPXrouted flags. NO if you don't want to start it. Do "man IPXrouted" # to get more information on the flags. ipxrouted=NO # timed flags, or NO if you don't want to start the time daemon timedflags=NO # xntpd flags, or NO if you don't want to start the xntpd daemon xntpdflags="NO" # this is inoperative unless xntpd is enabled; NO to disable tickadjflags="-Aq" # Set to the site you'd like to synchronize your clock from (gatekeeper.dec.com, # for example) or NO for no such site. ntpdate="NO" # Set to YES if you want to run rwhod rwhod=NO # Set to NO if don't want to run lpd lpd=YES # Default sendmail flags. -bd is pretty mandatory, -qm sets the queue scan # time in minutes. If set to NO, don't start sendmail at all. sendmail_flags="-bd -q30m" # Set to appropriate flags if you want to use AMD. The commented-out entry # provides a reasonable default, using the sample amd.map config file from the # /usr/src/etc directory. amdflags="NO" #amdflags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" # Set to YES if this machine will be an NFS client nfs_client=NO # Set to YES if this machine will be an NFS server nfs_server=NO # Set to appropriate flags if you want to start NIS for a client nis_clientflags="NO" # Name of host to ypset to, if no YP server on this wire nis_ypsetflags="NO" # Set to appropriate flags if you want to start NIS for a server nis_serverflags="NO" # Set to appropriate flags for rpc.ypxfrd. This should only be # run on NIS master servers. ypxfrdflags="NO" # Set to appropriate flags for rpc.yppasswdd. This should only be # run on NIS master servers. # Typical flags might be "-t /var/yp/master.passwd -s -f" yppasswddflags="NO" # Set to appropriate flags for named, if you have a full-time # connection to the Internet. # For most hosts, flags should be "-b /etc/namedb/named.boot" namedflags="NO" # Set to YES if you want to run the X-10 power controller daemon xtend=NO # Set to the name of the device for kernel crashdumps, or `off' to # disable any statically configured dumpdev, or NO for no change. # The device should normally be one of the swap devices specified # in /etc/fstab. dumpdev=NO # Set to YES if you want kernel crashdumps to be saved for debugging savecore=NO # Set to an additional swapfile you'd like to have added to preallocated swap # space during system boot (or NO for none). swapfile=NO # Set to YES if you want to run Kerberos authentication kerberos_server=NO # If you want this host to be a gateway, set to YES. gateway=NO # If you want this host to be a firewall or otherwise filter IP, set to YES. firewall=NO # Set to YES if you wish to check quotas. check_quotas=NO # Set to YES to turn on accounting. accounting=NO ######################### End Of Netconfig Section ####################### ######################### Start Of PC-card Section ####################### # If you want to enable APM BIOS driver, set to YES # (The APM BIOS driver is not configured into GENERIC kernel b/c of bugs) apm_enable=NO # If you want to use PC-card package, set to YES # (PC-card support is not configured in the GENERIC kernel) pccard_enable=NO # If you want to specify the address of memory used by PCIC, # set this address (DEFAULT=0xd0000) pccard_mem=DEFAULT # If you want to use Etnerent PCMCIA cards, specify the ifconfig portion # here. (card-specific flags like connector selection should be written in # the card-specific entry in /etc/pccard.conf). Set to DHCP if you want to # use a DHCP server to determine your IP address. If you want to use DHCP # please install Wide-DHCP client from ports/packages collection (this # package requires you to configure and setup BPF (Berkeley Packet Filter) # in your kernel. # # Set to NO if you don't want to configure your PC-CARD ethernet controller. # # for example: # # pccard_ifconfig="131.113.32.126 netmask 0xffffff00" # or # pccard_ifconfig="DHCP" # pccard_ifconfig=NO ######################### End Of PC-card Section ####################### ######################### Start Of Misc Section ####################### # Set to YES if you want ibcs2 (SCO) emulation loaded at startup ibcs2=NO # Set to YES if you want Linux a.out emulation loaded at startup linux=NO # Set to a string representing the interrupts you are going to use # for generating entropy in the kernel (or NO to ignore). # If the machine is networked, the Ethernet card IRQ is good. # The IRQ on an intelligent hard disk controller is good. # The IRQ's on most sound devices are good. # # The following choices are BAD: # The IRQ's on COM-ports (SIO devices), the IRQ used by a "classic" # IDE disk or cdrom (Intelligent controllers seem to be OK), and # the IRQ on the system clock. # # Experiment with the rest. The best interrupts are the ones that # happen fairly irregularly, and never occur in very high-speed bursts. # # You'll have it right when you have a good supply of numbers from # /dev/random, and no problems on your system, like slowdowns, # Sluggish net/disk activity, perhaps even errors. # For example - if you have a sound blaster on IRQ5, an ethernet card # on IRQ10 and a SCSI controller on IRQ11 (eg ADAPTEC 1542) you might # try this: # # rand_irqs="-s 5 -s 10 -s 11" rand_irqs="NO"