/* * Device driver for Specialix range (SLXOS) of serial line multiplexors. * * Copyright (C) 1990, 1992 Specialix International, * Copyright (C) 1993, Andy Rutter * Copyright (C) 1995, Peter Wemm * * Originally derived from: SunOS 4.x version * Ported from BSDI version to FreeBSD by Peter Wemm. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notices, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notices, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Andy Rutter of * Advanced Methods and Tools Ltd. based on original information * from Specialix International. * 4. Neither the name of Advanced Methods and Tools, nor Specialix * International may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHORS BE LIABLE. * * $Id: si.c,v 1.6 1995/09/11 06:28:38 peter Exp $ */ #ifndef lint static char si_copyright1[] = "@(#) (C) Specialix International, 1990,1992", si_copyright2[] = "@(#) (C) Andy Rutter 1993", si_copyright3[] = "@(#) (C) Peter Wemm 1995"; #endif /* not lint */ #define SI_DEBUG /* turn driver debugging on */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "si.h" /* * This device driver is designed to interface the Specialix International * range of serial multiplexor cards (SLXOS) to BSDI/386 on an ISA bus machine. * * The controller is interfaced to the host via dual port ram * and a (programmable - SIHOST2) interrupt at IRQ 11,12 or 15. */ #define POLL /* turn on poller to generate buffer empty interrupt */ #define SI_DEF_HWFLOW /* turn on default CRTSCTS flow control */ #define SI_I_HIGH_WATER (TTYHOG - SLXOS_BUFFERSIZE) enum si_mctl { GET, SET, BIS, BIC }; static void si_command __P((struct si_port *, int, int)); static int si_modem __P((struct si_port *, enum si_mctl, int)); static void si_write_enable __P((struct si_port *, int)); static int si_Sioctl __P((dev_t, int, caddr_t, int, struct proc *)); static void si_start __P((struct tty *)); static void si_lstart __P((struct si_port *)); static void si_disc_optim __P((struct tty *tp, struct termios *t, struct si_port *pp)); static void sihardclose __P((struct si_port *pp)); static void sidtrwakeup __P((void *chan)); void sistop __P((struct tty *tp, int rw)); void siintr __P((int bdnum)); int siparam __P((struct tty *, struct termios *)); extern void si_registerdev __P((struct isa_device *id)); extern int siprobe __P((struct isa_device *id)); extern int siattach __P((struct isa_device *id)); static void si_modem_state __P((struct si_port *pp, struct tty *tp, int hi_ip)); #ifdef SI_DEBUG static void si_dprintf __P((/* XXX should be varargs struct si_port *pp, int flags, char *str, int a1, int a2, int a3, int a4, int a5, int a6 */)); static char *si_mctl2str __P((enum si_mctl cmd)); #define DPRINT(x) si_dprintf x #else #define DPRINT(x) /* void */ #endif static int si_Nports = 0; static int si_Nmodules = 0; static int si_debug = 0; /* where the firmware lives */ extern int si_dsize; extern unsigned char si_download[]; struct si_softc { struct device sc_dev; /* base device */ int sc_type; /* adapter type */ char *sc_typename; /* adapter type string */ struct si_port *sc_ports; /* port structures for this card */ caddr_t sc_paddr; /* physical addr of iomem */ caddr_t sc_maddr; /* kvaddr of iomem */ int sc_nport; /* # ports on this card */ int sc_irq; /* copy of attach irq */ int sc_eisa_iobase; /* EISA io port address */ int sc_eisa_irqbits; struct kern_devconf sc_kdc; }; struct si_softc si_softc[NSI]; /* up to 4 elements */ #ifndef B2000 /* not standard */ # define B2000 2000 #endif static struct speedtab bdrates[] = { B75, CLK75, /* 0x0 */ B110, CLK110, /* 0x1 */ B150, CLK150, /* 0x3 */ B300, CLK300, /* 0x4 */ B600, CLK600, /* 0x5 */ B1200, CLK1200, /* 0x6 */ B2000, CLK2000, /* 0x7 */ B2400, CLK2400, /* 0x8 */ B4800, CLK4800, /* 0x9 */ B9600, CLK9600, /* 0xb */ B19200, CLK19200, /* 0xc */ B38400, CLK38400, /* 0x2 (out of order!) */ B57600, CLK57600, /* 0xd */ B115200, CLK110, /* 0x1 (dupe!, 110 baud on "si") */ -1, -1 }; /* populated with approx character/sec rates - translated at card * initialisation time to chars per tick of the clock */ static int done_chartimes = 0; static struct speedtab chartimes[] = { B75, 8, B110, 11, B150, 15, B300, 30, B600, 60, B1200, 120, B2000, 200, B2400, 240, B4800, 480, B9600, 960, B19200, 1920, B38400, 3840, B57600, 5760, B115200, 11520, -1, -1 }; static volatile int in_intr = 0; /* Inside interrupt handler? */ static int si_default_rate = TTYDEF_SPEED; static int si_default_iflag = 0; static int si_default_oflag = 0; static int si_default_lflag = 0; #ifdef SI_DEF_HWFLOW static int si_default_cflag = TTYDEF_CFLAG | CRTSCTS; #else static int si_default_cflag = TTYDEF_CFLAG; #endif #ifdef POLL #define POLL_INTERVAL (hz/2) static int init_finished = 0; static void si_poll __P((void *)); #endif /* * Array of adapter types and the corresponding RAM size. The order of * entries here MUST match the ordinal of the adapter type. */ static char *si_type[] = { "EMPTY", "SIHOST", "SI2", /* MCA */ "SIHOST2", "SIEISA", }; static struct kern_devconf si_kdc[NSI] = { { 0, 0, 0, /* filled in by dev_attach */ "si", 0, { MDDT_ISA, 0, "tty" }, isa_generic_externalize, 0, 0, ISA_EXTERNALLEN, &kdc_isa0, /* parent */ 0, /* parent data */ DC_UNCONFIGURED, /* state */ "Specialix SI/XIO Host adapter", DC_CLS_SERIAL, /* class */ } }; void si_registerdev(id) struct isa_device *id; { if (id->id_unit != 0) { si_kdc[id->id_unit] = si_kdc[0]; /* struct copy */ } si_kdc[id->id_unit].kdc_unit = id->id_unit; si_kdc[id->id_unit].kdc_isa = id; dev_attach(&si_kdc[id->id_unit]); } /* Look for a valid board at the given mem addr */ int siprobe(id) struct isa_device *id; { struct si_softc *sc; int type; u_int i, ramsize; volatile BYTE was, *ux; volatile unsigned char *maddr; unsigned char *paddr; si_registerdev(id); maddr = id->id_maddr; /* virtual address... */ paddr = (caddr_t)vtophys(id->id_maddr); /* physical address... */ DPRINT((0, DBG_AUTOBOOT, "SLXOS probe at virtual=0x%x physical=0x%x\n", id->id_maddr, paddr)); /* * this is a lie, but it's easier than trying to handle caching * and ram conflicts in the >1M and <16M region. */ if ((caddr_t)paddr < (caddr_t)IOM_BEGIN || (caddr_t)paddr >= (caddr_t)IOM_END) { printf("si%d: iomem (%x) out of range\n", id->id_unit, paddr); return(0); } if (id->id_unit >= NSI) { /* THIS IS IMPOSSIBLE */ return(0); } if (((u_int)paddr & 0x7fff) != 0) { DPRINT((0, DBG_AUTOBOOT|DBG_FAIL, "si%d: iomem (%x) not on 32k boundary\n", id->id_unit, paddr)); return(0); } for (i=0; i < NSI; i++) { if ((sc = &si_softc[i]) == NULL) continue; if ((caddr_t)sc->sc_paddr == (caddr_t)paddr) { DPRINT((0, DBG_AUTOBOOT|DBG_FAIL, "si%d: iomem (%x) already configured to si%d\n", id->id_unit, sc->sc_paddr, i)); return(0); } } #if NEISA > 0 if (id->id_iobase > 0x0fff) { /* EISA card */ int irq, port; unsigned long base; int eisa_irqs[] = { 0,IRQ1,IRQ2,IRQ3,IRQ4,IRQ5,IRQ6,IRQ7, IRQ8,IRQ9,IRQ10,IRQ11,IRQ12,IRQ13,IRQ14,IRQ15 }; port = id->id_iobase; base = (inb(port+1) << 24) | (inb(port) << 16); irq = ((inb(port+2) >> 4) & 0xf); id->id_irq = eisa_irqs[irq]; DPRINT((0, DBG_AUTOBOOT, "SLXOS: si%d: EISA base %x, irq %x, id_irq %x, port %x\n", id->id_unit, base, irq, id->id_irq, port)); if ((id->id_irq&(IRQ1|IRQ2|IRQ8|IRQ13)) != 0) goto bad_irq; id->id_iobase &= 0xf000; id->id_iosize = 0x0fff; type = EISA; outb(p+2, (BYTE)irq << 4); sc->sc_eisa_iobase = p; sc->sc_eisa_irqbits = irq << 4; ramsize = SIEISA_RAMSIZE; goto got_card; } #endif /* Is there anything out there? (0x17 is just an arbitrary number) */ *maddr = 0x17; if (*maddr != 0x17) { DPRINT((0, DBG_AUTOBOOT|DBG_FAIL, "si%d: 0x17 check fail at phys 0x%x\n", id->id_unit, paddr)); fail: return(0); } /* * OK, now to see if whatever responded is really an SI card. * Try for a MK II first (SIHOST2) */ for (i=SIPLSIG; iid_unit, paddr+0x77f8, *(maddr+0x77f8))); goto fail; } /* It must be an SIHOST (maybe?) - there must be a better way XXXX */ type = SIHOST; ramsize = SIHOST_RAMSIZE; got_card: DPRINT((0, DBG_AUTOBOOT, "SLXOS: found type %d card, try memory test\n", type)); /* Try the acid test */ ux = (BYTE *)(maddr + SIRAM); for (i=0; iid_unit, paddr+i, was, i&0xff)); goto fail; } } /* clear out the RAM */ ux = (BYTE *)(maddr + SIRAM); for (i=0; iid_unit, paddr+i, was)); goto fail; } } /* * Success, we've found a valid board, now fill in * the adapter structure. */ switch (type) { case SIHOST2: if ((id->id_irq&(IRQ11|IRQ12|IRQ15)) == 0) { bad_irq: DPRINT((0, DBG_AUTOBOOT|DBG_FAIL, "si%d: bad IRQ value - %d\n", id->id_unit, id->id_irq)); return(0); } id->id_msize = SIHOST2_MEMSIZE; break; case SIHOST: if ((id->id_irq&(IRQ11|IRQ12|IRQ15)) == 0) { goto bad_irq; } id->id_msize = SIHOST_MEMSIZE; break; case SIEISA: id->id_msize = SIEISA_MEMSIZE; break; case SI2: /* MCA */ default: printf("si%d: %s not supported\n", id->id_unit, si_type[type]); return(0); } si_softc[id->id_unit].sc_type = type; si_softc[id->id_unit].sc_typename = si_type[type]; return(-1); /* -1 == found */ } /* * Attach the device. Initialize the card. */ int siattach(id) struct isa_device *id; { int unit = id->id_unit; struct si_softc *sc = &si_softc[unit]; struct si_port *pp; volatile struct si_channel *ccbp; volatile struct si_reg *regp; volatile caddr_t maddr; struct si_module *modp; struct tty *tp; struct speedtab *spt; int nmodule, nport, x, y; DPRINT((0, DBG_AUTOBOOT, "SLXOS siattach\n")); sc->sc_paddr = (caddr_t)vtophys(id->id_maddr); sc->sc_maddr = id->id_maddr; sc->sc_irq = id->id_irq; sc->sc_ports = NULL; /* mark as uninitialised */ maddr = sc->sc_maddr; /* * OK, now lets download the firmware and try and boot the CPU.. */ DPRINT((0, DBG_DOWNLOAD, "SLXOS si_download: nbytes %d\n", si_dsize)); bcopy(si_download, maddr, si_dsize); switch (sc->sc_type) { case SIEISA: #if NEISA > 0 /* modify the Z280 firmware to tell it that it's on an EISA */ *(maddr+0x42) = 1; outb(sc->sc_eisa_iobase+2, sc->sc_eisa_irqbits | 4); (void)inb(sc->sc_eisa_iobase+3); /* reset interrupt */ break; #endif /* fall-through if not EISA */ case SI2: /* must get around to writing the code for * these one day */ return 0; case SIHOST: *(maddr+SIRESET_CL) = 0; *(maddr+SIINTCL_CL) = 0; break; case SIHOST2: *(maddr+SIPLRESET) = 0x10; switch (sc->sc_irq) { case IRQ11: *(maddr+SIPLIRQ11) = 0x10; break; case IRQ12: *(maddr+SIPLIRQ12) = 0x10; break; case IRQ15: *(maddr+SIPLIRQ15) = 0x10; break; } *(maddr+SIPLIRQCLR) = 0x10; break; } DELAY(1000000); /* wait around for a second */ regp = (struct si_reg *)maddr; y = 0; /* wait max of 5 sec for init OK */ while (regp->initstat == 0 && y++ < 10) { DELAY(500000); } switch (regp->initstat) { case 0: printf("si%d: startup timeout - aborting\n", unit); sc->sc_type = NULL; return 0; case 1: /* set throttle to 100 intr per second */ regp->int_count = 25000; /* rx intr max of 25 timer per second */ regp->rx_int_count = 4; regp->int_pending = 0; /* no intr pending */ regp->int_scounter = 0; /* reset counter */ break; case 0xff: /* * No modules found, so give up on this one. */ printf("si%d: %s - no ports found\n", unit, si_type[sc->sc_type]); return 0; default: printf("si%d: Z280 version error - initstat %x\n", unit, regp->initstat); return 0; } /* * First time around the ports just count them in order * to allocate some memory. */ nport = 0; modp = (struct si_module *)(maddr + 0x80); for (;;) { DPRINT((0, DBG_DOWNLOAD, "SLXOS si%d: ccb addr 0x%x\n", unit, modp)); switch (modp->sm_type & (~MMASK)) { case M232: case M422: DPRINT((0, DBG_DOWNLOAD, "SLXOS si%d: Found 232/422 module, %d ports\n", unit, (int)(modp->sm_type & MMASK))); /* this is a firmware issue */ if (si_Nports == SI_MAXPORTPERCARD) { printf("si%d: extra ports ignored\n", unit); continue; } x = modp->sm_type & MMASK; nport += x; si_Nports += x; si_Nmodules++; break; default: printf("si%d: unknown module type %d\n", unit, modp->sm_type); break; } if (modp->sm_next == 0) break; modp = (struct si_module *) (maddr + (unsigned)(modp->sm_next & 0x7fff)); } sc->sc_ports = (struct si_port *)malloc(sizeof(struct si_port) * nport, M_DEVBUF, M_NOWAIT); if (sc->sc_ports == 0) { mem_fail: printf("si%d: fail to malloc memory for port structs\n", unit); return 0; } bzero(sc->sc_ports, sizeof(struct si_port) * nport); sc->sc_nport = nport; /* * allocate tty structures for ports */ tp = (struct tty *)malloc(sizeof(*tp) * nport, M_DEVBUF, M_NOWAIT); if (tp == 0) goto mem_fail; bzero(tp, sizeof(*tp) * nport); /* mark the device state as attached */ si_kdc[unit].kdc_state = DC_BUSY; /* * Scan round the ports again, this time initialising. */ pp = sc->sc_ports; nmodule = 0; modp = (struct si_module *)(maddr + 0x80); for (;;) { switch (modp->sm_type & (~MMASK)) { case M232: case M422: nmodule++; nport = (modp->sm_type & MMASK); ccbp = (struct si_channel *)((char *)modp+0x100); for (x = 0; x < nport; x++, pp++, ccbp++) { pp->sp_ccb = ccbp; /* save the address */ pp->sp_tty = tp++; pp->sp_pend = IDLE_CLOSE; pp->sp_flags = 0; pp->sp_state = 0; /* internal flag */ pp->sp_dtr_wait = 3 * hz; pp->sp_iin.c_iflag = si_default_iflag; pp->sp_iin.c_oflag = si_default_oflag; pp->sp_iin.c_cflag = si_default_cflag; pp->sp_iin.c_lflag = si_default_lflag; termioschars(&pp->sp_iin); pp->sp_iin.c_ispeed = pp->sp_iin.c_ospeed = si_default_rate; pp->sp_iout = pp->sp_iin; } break; default: break; } if (modp->sm_next == 0) { printf("si%d: %s, ports: %d, modules: %d\n", unit, sc->sc_typename, sc->sc_nport, nmodule); break; } modp = (struct si_module *) (maddr + (unsigned)(modp->sm_next & 0x7fff)); } if (done_chartimes == 0) { for (spt = chartimes ; spt->sp_speed != -1; spt++) { if ((spt->sp_code /= hz) == 0) spt->sp_code = 1; } done_chartimes = 1; /* tell them where we stand.. */ printf("\ si%d: -------------------USE AT YOUR OWN RISK!!!!--------------------\n\ si%d: WARNING!! THIS DRIVER IS NOT COMPLETE NOR SUFFICIENTLY TESTED!!\n\ si%d: -------------------USE AT YOUR OWN RISK!!!!--------------------\n\ ", unit, unit, unit); } return (1); } struct isa_driver sidriver = { siprobe, siattach, "si" }; int siopen(dev, flag, mode, p) dev_t dev; int flag, mode; struct proc *p; { int oldspl, error; int card, port; register struct si_softc *sc; register struct tty *tp; volatile struct si_channel *ccbp; struct si_port *pp; int mynor = minor(dev); /* quickly let in /dev/si_control */ if (IS_CONTROLDEV(mynor)) { if (error = suser(p->p_ucred, &p->p_acflag)) return(error); return(0); } card = SI_CARD(mynor); if (card >= NSI) return (ENXIO); sc = &si_softc[card]; if (sc->sc_type == NULL) { DPRINT((0, DBG_OPEN|DBG_FAIL, "SLXOS si%d: type %s??\n", card, sc->sc_typename)); return(ENXIO); } port = SI_PORT(mynor); if (port >= sc->sc_nport) { DPRINT((0, DBG_OPEN|DBG_FAIL, "SLXOS si%d: nports %d\n", card, sc->sc_nport)); return(ENXIO); } #ifdef POLL /* * We've now got a device, so start the poller. */ if (init_finished == 0) { timeout(si_poll, (caddr_t)0L, POLL_INTERVAL); init_finished = 1; } #endif /* initial/lock device */ if (IS_STATE(mynor)) { return(0); } pp = sc->sc_ports + port; tp = pp->sp_tty; /* the "real" tty */ ccbp = pp->sp_ccb; /* Find control block */ DPRINT((pp, DBG_ENTRY|DBG_OPEN, "siopen(%x,%x,%x,%x)\n", dev, flag, mode, p)); oldspl = spltty(); /* Keep others out */ error = 0; open_top: while (pp->sp_state & SS_DTR_OFF) { error = tsleep(&pp->sp_dtr_wait, TTIPRI|PCATCH, "sidtr", 0); if (error != 0) goto out; } if (tp->t_state & TS_ISOPEN) { /* * The device is open, so everything has been initialised. * handle conflicts. */ if (IS_CALLOUT(mynor)) { if (!pp->sp_active_out) { error = EBUSY; goto out; } } else { if (pp->sp_active_out) { if (flag & O_NONBLOCK) { error = EBUSY; goto out; } error = tsleep(&pp->sp_active_out, TTIPRI|PCATCH, "sibi", 0); if (error != 0) goto out; goto open_top; } } if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) { DPRINT((pp, DBG_OPEN|DBG_FAIL, "already open and EXCLUSIVE set\n")); error = EBUSY; goto out; } } else { /* * The device isn't open, so there are no conflicts. * Initialize it. Avoid sleep... :-) */ DPRINT((pp, DBG_OPEN, "first open\n")); tp->t_oproc = si_start; tp->t_param = siparam; tp->t_dev = dev; tp->t_termios = mynor & SI_CALLOUT_MASK ? pp->sp_iout : pp->sp_iin; (void) si_modem(pp, SET, TIOCM_DTR|TIOCM_RTS); ++pp->sp_wopeners; /* in case of sleep in siparam */ error = siparam(tp, &tp->t_termios); --pp->sp_wopeners; if (error != 0) goto out; /* XXX: we should goto_top if siparam slept */ ttsetwater(tp); /* set initial DCD state */ pp->sp_last_hi_ip = ccbp->hi_ip; if ((pp->sp_last_hi_ip & IP_DCD) || IS_CALLOUT(mynor)) { (*linesw[tp->t_line].l_modem)(tp, 1); } } /* whoops! we beat the close! */ if (pp->sp_state & SS_CLOSING) { /* try and stop it from proceeding to bash the hardware */ pp->sp_state &= ~SS_CLOSING; } /* * Wait for DCD if necessary */ if (!(tp->t_state & TS_CARR_ON) && !IS_CALLOUT(mynor) && !(tp->t_cflag & CLOCAL) && !(flag & O_NONBLOCK)) { ++pp->sp_wopeners; DPRINT((pp, DBG_OPEN, "sleeping for carrier\n")); error = tsleep(TSA_CARR_ON(tp), TTIPRI|PCATCH, "sidcd", 0); --pp->sp_wopeners; if (error != 0) goto out; goto open_top; } error = (*linesw[tp->t_line].l_open)(dev, tp); si_disc_optim(tp, &tp->t_termios, pp); if (tp->t_state & TS_ISOPEN && IS_CALLOUT(mynor)) pp->sp_active_out = TRUE; pp->sp_state |= SS_OPEN; /* made it! */ out: splx(oldspl); DPRINT((pp, DBG_OPEN, "leaving siopen\n")); if (!(tp->t_state & TS_ISOPEN) && pp->sp_wopeners == 0) sihardclose(pp); return(error); } int siclose(dev, flag, mode, p) dev_t dev; int flag, mode; struct proc *p; { register struct si_port *pp; register struct tty *tp; int oldspl; int error = 0; int mynor = minor(dev); if (IS_SPECIAL(mynor)) return(0); oldspl = spltty(); pp = MINOR2PP(mynor); tp = pp->sp_tty; DPRINT((pp, DBG_ENTRY|DBG_CLOSE, "siclose(%x,%x,%x,%x) sp_state:%x\n", dev, flag, mode, p, pp->sp_state)); /* did we sleep and loose a race? */ if (pp->sp_state & SS_CLOSING) { /* error = ESOMETING? */ goto out; } /* begin race detection.. */ pp->sp_state |= SS_CLOSING; si_write_enable(pp, 0); /* block writes for ttywait() */ /* THIS MAY SLEEP IN TTYWAIT!!! */ (*linesw[tp->t_line].l_close)(tp, flag); si_write_enable(pp, 1); /* did we sleep and somebody started another open? */ if (!(pp->sp_state & SS_CLOSING)) { /* error = ESOMETING? */ goto out; } /* ok. we are now still on the right track.. nuke the hardware */ if (pp->sp_state & SS_LSTART) { untimeout((timeout_func_t)si_lstart, (caddr_t)pp); pp->sp_state &= ~SS_LSTART; } sistop(tp, FREAD | FWRITE); sihardclose(pp); ttyclose(tp); pp->sp_state &= ~SS_OPEN; out: DPRINT((pp, DBG_CLOSE|DBG_EXIT, "close done, returning\n")); splx(oldspl); return(error); } static void sihardclose(pp) struct si_port *pp; { int oldspl; struct tty *tp; volatile struct si_channel *ccbp; oldspl = spltty(); tp = pp->sp_tty; ccbp = pp->sp_ccb; /* Find control block */ if (tp->t_cflag & HUPCL || !pp->sp_active_out && !(ccbp->hi_ip & IP_DCD) && !(pp->sp_iin.c_cflag && CLOCAL) || !(tp->t_state & TS_ISOPEN)) { (void) si_modem(pp, BIC, TIOCM_DTR|TIOCM_RTS); (void) si_command(pp, FCLOSE, SI_NOWAIT); if (pp->sp_dtr_wait != 0) { timeout(sidtrwakeup, pp, pp->sp_dtr_wait); pp->sp_state |= SS_DTR_OFF; } } pp->sp_active_out = FALSE; wakeup((caddr_t)&pp->sp_active_out); wakeup(TSA_CARR_ON(tp)); splx(oldspl); } /* * called at splsoftclock()... */ static void sidtrwakeup(chan) void *chan; { struct si_port *pp; int oldspl; oldspl = spltty(); pp = (struct si_port *)chan; pp->sp_state &= ~SS_DTR_OFF; wakeup(&pp->sp_dtr_wait); splx(oldspl); } /* * User level stuff - read and write */ int siread(dev, uio, flag) register dev_t dev; struct uio *uio; int flag; { register struct tty *tp; int mynor = minor(dev); if (IS_SPECIAL(mynor)) { DPRINT((0, DBG_ENTRY|DBG_FAIL|DBG_READ, "siread(CONTROLDEV!!)\n")); return(ENODEV); } tp = MINOR2TP(mynor); DPRINT((TP2PP(tp), DBG_ENTRY|DBG_READ, "siread(%x,%x,%x)\n", dev, uio, flag)); return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); } int siwrite(dev, uio, flag) dev_t dev; struct uio *uio; int flag; { register struct si_port *pp; register struct tty *tp; int error = 0; int mynor = minor(dev); int oldspl; if (IS_SPECIAL(mynor)) { DPRINT((0, DBG_ENTRY|DBG_FAIL|DBG_WRITE, "siwrite(CONTROLDEV!!)\n")); return(ENODEV); } pp = MINOR2PP(mynor); tp = pp->sp_tty; DPRINT((pp, DBG_WRITE, "siwrite(%x,%x,%x)\n", dev, uio, flag)); oldspl = spltty(); /* * If writes are currently blocked, wait on the "real" tty */ while (pp->sp_state & SS_BLOCKWRITE) { pp->sp_state |= SS_WAITWRITE; DPRINT((pp, DBG_WRITE, "in siwrite, wait for SS_BLOCKWRITE to clear\n")); if (error = ttysleep(tp, (caddr_t)pp, TTOPRI|PCATCH, "siwrite", 0)) goto out; } error = (*linesw[tp->t_line].l_write)(tp, uio, flag); out: splx(oldspl); return (error); } struct tty * sidevtotty(dev_t dev) { struct si_port *pp; int mynor = minor(dev); struct si_softc *sc = &si_softc[SI_CARD(mynor)]; if (IS_SPECIAL(mynor)) return(NULL); if (SI_PORT(mynor) >= sc->sc_nport) return(NULL); pp = MINOR2PP(mynor); return (pp->sp_tty); } int siioctl(dev, cmd, data, flag, p) dev_t dev; int cmd; caddr_t data; int flag; struct proc *p; { struct si_port *pp; register struct tty *tp; int error; int mynor = minor(dev); int oldspl; int blocked = 0; #if defined(COMPAT_43) int oldcmd; struct termios term; #endif if (IS_SI_IOCTL(cmd)) return(si_Sioctl(dev, cmd, data, flag, p)); pp = MINOR2PP(mynor); tp = pp->sp_tty; DPRINT((pp, DBG_ENTRY|DBG_IOCTL, "siioctl(%x,%x,%x,%x)\n", dev, cmd, data, flag)); if (IS_STATE(mynor)) { struct termios *ct; switch (mynor & SI_STATE_MASK) { case SI_INIT_STATE_MASK: ct = IS_CALLOUT(mynor) ? &pp->sp_iout : &pp->sp_iin; break; case SI_LOCK_STATE_MASK: ct = IS_CALLOUT(mynor) ? &pp->sp_iout : &pp->sp_iin; break; default: return (ENODEV); } switch (cmd) { case TIOCSETA: error = suser(p->p_ucred, &p->p_acflag); if (error != 0) return (error); *ct = *(struct termios *)data; return (0); case TIOCGETA: *(struct termios *)data = *ct; return (0); case TIOCGETD: *(int *)data = TTYDISC; return (0); case TIOCGWINSZ: bzero(data, sizeof(struct winsize)); return (0); default: return (ENOTTY); } } /* * Do the old-style ioctl compat routines... */ #if defined(COMPAT_43) term = tp->t_termios; oldcmd = cmd; error = ttsetcompat(tp, &cmd, data, &term); if (error != 0) return (error); if (cmd != oldcmd) data = (caddr_t)&term; #endif /* * Do the initial / lock state business */ if (cmd == TIOCSETA || cmd == TIOCSETAW || cmd == TIOCSETAF) { int cc; struct termios *dt = (struct termios *)data; struct termios *lt = mynor & SI_CALLOUT_MASK ? &pp->sp_lout : &pp->sp_lin; dt->c_iflag = (tp->t_iflag & lt->c_iflag) | (dt->c_iflag & ~lt->c_iflag); dt->c_oflag = (tp->t_oflag & lt->c_oflag) | (dt->c_oflag & ~lt->c_oflag); dt->c_cflag = (tp->t_cflag & lt->c_cflag) | (dt->c_cflag & ~lt->c_cflag); dt->c_lflag = (tp->t_lflag & lt->c_lflag) | (dt->c_lflag & ~lt->c_lflag); for (cc = 0; cc < NCCS; ++cc) if (lt->c_cc[cc] != 0) dt->c_cc[cc] = tp->t_cc[cc]; if (lt->c_ispeed != 0) dt->c_ispeed = tp->t_ispeed; if (lt->c_ospeed != 0) dt->c_ospeed = tp->t_ospeed; } /* * Block user-level writes to give the ttywait() * a chance to completely drain for commands * that require the port to be in a quiescent state. */ switch (cmd) { case TIOCSETAW: case TIOCSETAF: case TIOCDRAIN: case TIOCSETP: blocked++; /* block writes for ttywait() and siparam() */ si_write_enable(pp, 0); } error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); if (error >= 0) goto out; oldspl = spltty(); error = ttioctl(tp, cmd, data, flag); si_disc_optim(tp, &tp->t_termios, pp); if (error >= 0) goto outspl; switch (cmd) { case TIOCSBRK: si_command(pp, SBREAK, SI_NOWAIT); break; case TIOCCBRK: si_command(pp, EBREAK, SI_NOWAIT); break; case TIOCSDTR: (void) si_modem(pp, SET, TIOCM_DTR|TIOCM_RTS); break; case TIOCCDTR: (void) si_modem(pp, SET, 0); break; case TIOCMSET: (void) si_modem(pp, SET, *(int *)data); break; case TIOCMBIS: (void) si_modem(pp, BIS, *(int *)data); break; case TIOCMBIC: (void) si_modem(pp, BIC, *(int *)data); break; case TIOCMGET: *(int *)data = si_modem(pp, GET, 0); break; case TIOCMSDTRWAIT: /* must be root since the wait applies to following logins */ error = suser(p->p_ucred, &p->p_acflag); if (error != 0) { goto outspl; } pp->sp_dtr_wait = *(int *)data * hz / 100; break; case TIOCMGDTRWAIT: *(int *)data = pp->sp_dtr_wait * 100 / hz; break; default: error = ENOTTY; } error = 0; outspl: splx(oldspl); out: DPRINT((pp, DBG_IOCTL|DBG_EXIT, "siioctl ret %d\n", error)); if (blocked) si_write_enable(pp, 1); return(error); } /* * Handle the Specialix ioctls. All MUST be called via the CONTROL device */ static int si_Sioctl(dev_t dev, int cmd, caddr_t data, int flag, struct proc *p) { struct si_softc *xsc; register struct si_port *xpp; volatile struct si_reg *regp; struct si_tcsi *dp; struct si_pstat *sps; BYTE *bp; int i, *ip, error = 0; int oldspl; int card, port; unsigned short *usp; int mynor = minor(dev); DPRINT((0, DBG_ENTRY|DBG_IOCTL, "si_Sioctl(%x,%x,%x,%x)\n", dev, cmd, data, flag)); #if 1 DPRINT((0, DBG_IOCTL, "TCSI_PORT=%x\n", TCSI_PORT)); DPRINT((0, DBG_IOCTL, "TCSI_CCB=%x\n", TCSI_CCB)); DPRINT((0, DBG_IOCTL, "TCSI_TTY=%x\n", TCSI_TTY)); #endif if (!IS_CONTROLDEV(mynor)) { DPRINT((0, DBG_IOCTL|DBG_FAIL, "not called from control device!\n")); return(ENODEV); } oldspl = spltty(); /* better safe than sorry */ ip = (int *)data; #define SUCHECK if (error = suser(p->p_ucred, &p->p_acflag)) goto out switch (cmd) { case TCSIPORTS: *ip = si_Nports; goto out; case TCSIMODULES: *ip = si_Nmodules; goto out; case TCSISDBG_ALL: SUCHECK; si_debug = *ip; goto out; case TCSIGDBG_ALL: *ip = si_debug; goto out; default: /* * Check that a controller for this port exists */ /* may also be a struct si_pstat, a superset of si_tcsi */ dp = (struct si_tcsi *)data; sps = (struct si_pstat *)data; card = dp->tc_card; xsc = &si_softc[card]; /* check.. */ if (card < 0 || card >= NSI || xsc->sc_type == NULL) { error = ENOENT; goto out; } /* * And check that a port exists */ port = dp->tc_port; if (port < 0 || port >= xsc->sc_nport) { error = ENOENT; goto out; } xpp = xsc->sc_ports + port; regp = (struct si_reg *)xsc->sc_maddr; } switch (cmd) { case TCSIDEBUG: #ifdef SI_DEBUG SUCHECK; if (xpp->sp_debug) xpp->sp_debug = 0; else { xpp->sp_debug = DBG_ALL; DPRINT((xpp, DBG_IOCTL, "debug toggled %s\n", (xpp->sp_debug&DBG_ALL)?"ON":"OFF")); } break; #else error = ENODEV; goto out; #endif case TCSISDBG_LEVEL: case TCSIGDBG_LEVEL: #ifdef SI_DEBUG if (cmd == TCSIGDBG_LEVEL) { dp->tc_dbglvl = xpp->sp_debug; } else { SUCHECK; xpp->sp_debug = dp->tc_dbglvl; } break; #else error = ENODEV; goto out; #endif case TCSIGRXIT: dp->tc_int = regp->rx_int_count; break; case TCSIRXIT: SUCHECK; regp->rx_int_count = dp->tc_int; break; case TCSIGIT: dp->tc_int = regp->int_count; break; case TCSIIT: SUCHECK; regp->int_count = dp->tc_int; break; case TCSISTATE: dp->tc_int = xpp->sp_ccb->hi_ip; break; /* these next three use a different structure */ case TCSI_PORT: SUCHECK; sps->tc_siport = *xpp; break; case TCSI_CCB: SUCHECK; sps->tc_ccb = *xpp->sp_ccb; break; case TCSI_TTY: SUCHECK; sps->tc_tty = *xpp->sp_tty; break; default: error = EINVAL; goto out; } out: splx(oldspl); return(error); /* success */ } /* * siparam() : Configure line params * called at spltty(); * this may sleep, does not flush, nor wait for drain, nor block writes * caller must arrange this if it's important.. */ int siparam(tp, t) register struct tty *tp; register struct termios *t; { register struct si_port *pp = TP2PP(tp); volatile struct si_channel *ccbp; int oldspl, cflag, iflag, oflag, lflag; int error = 0; /* shutup gcc */ int ispeed = 0; /* shutup gcc */ int ospeed = 0; /* shutup gcc */ BYTE val; DPRINT((pp, DBG_ENTRY|DBG_PARAM, "siparam(%x,%x)\n", tp, t)); cflag = t->c_cflag; iflag = t->c_iflag; oflag = t->c_oflag; lflag = t->c_lflag; DPRINT((pp, DBG_PARAM, "OFLAG 0x%x CFLAG 0x%x IFLAG 0x%x LFLAG 0x%x\n", oflag, cflag, iflag, lflag)); /* if not hung up.. */ if (t->c_ospeed != 0) { /* translate baud rate to firmware values */ ospeed = ttspeedtab(t->c_ospeed, bdrates); ispeed = t->c_ispeed ? ttspeedtab(t->c_ispeed, bdrates) : ospeed; /* enforce legit baud rate */ if (ospeed < 0 || ispeed < 0) return (EINVAL); } oldspl = spltty(); ccbp = pp->sp_ccb; /* ========== set hi_break ========== */ val = 0; if (iflag & IGNBRK) /* Breaks */ val |= BR_IGN; if (iflag & BRKINT) /* Interrupt on break? */ val |= BR_INT; if (iflag & PARMRK) /* Parity mark? */ val |= BR_PARMRK; if (iflag & IGNPAR) /* Ignore chars with parity errors? */ val |= BR_PARIGN; ccbp->hi_break = val; /* ========== set hi_csr ========== */ /* if not hung up.. */ if (t->c_ospeed != 0) { /* Set I/O speeds */ val = (ispeed << 4) | ospeed; } ccbp->hi_csr = val; /* ========== set hi_mr2 ========== */ val = 0; if (cflag & CSTOPB) /* Stop bits */ val |= MR2_2_STOP; else val |= MR2_1_STOP; /* * Enable H/W RTS/CTS handshaking. The default TA/MTA is * a DCE, hence the reverse sense of RTS and CTS */ /* Output Flow - RTS must be raised before data can be sent */ if (cflag & CCTS_OFLOW) val |= MR2_RTSCONT; ccbp->hi_mr1 = val; /* ========== set hi_mr1 ========== */ val = 0; if (!(cflag & PARENB)) /* Parity */ val |= MR1_NONE; else val |= MR1_WITH; if (cflag & PARODD) val |= MR1_ODD; if ((cflag & CS8) == CS8) { /* 8 data bits? */ val |= MR1_8_BITS; } else if ((cflag & CS7) == CS7) { /* 7 data bits? */ val |= MR1_7_BITS; } else if ((cflag & CS6) == CS6) { /* 6 data bits? */ val |= MR1_6_BITS; } else { /* Must be 5 */ val |= MR1_5_BITS; } /* * Enable H/W RTS/CTS handshaking. The default TA/MTA is * a DCE, hence the reverse sense of RTS and CTS */ /* Input Flow - CTS is raised when port is ready to receive data */ if (cflag & CRTS_IFLOW) val |= MR1_CTSCONT; ccbp->hi_mr1 = val; /* ========== set hi_mask ========== */ val = 0xff; if ((cflag & CS8) == CS8) { /* 8 data bits? */ val &= 0xFF; } else if ((cflag & CS7) == CS7) { /* 7 data bits? */ val &= 0x7F; } else if ((cflag & CS6) == CS6) { /* 6 data bits? */ val &= 0x3F; } else { /* Must be 5 */ val &= 0x1F; } if (iflag & ISTRIP) val &= 0x7F; ccbp->hi_mask = val; /* ========== set hi_prtcl ========== */ val = 0; /* Monitor DCD etc. if a modem */ if (!(cflag & CLOCAL)) val |= SP_DCEN; if (iflag & IXANY) val |= SP_TANY; if (iflag & IXON) val |= SP_TXEN; if (iflag & IXOFF) val |= SP_RXEN; if (iflag & INPCK) val |= SP_PAEN; ccbp->hi_prtcl = val; /* ========== set hi_{rx|tx}{on|off} ========== */ /* XXX: the card TOTALLY shields us from the flow control... */ ccbp->hi_txon = t->c_cc[VSTART]; ccbp->hi_txoff = t->c_cc[VSTOP]; ccbp->hi_rxon = t->c_cc[VSTART]; ccbp->hi_rxoff = t->c_cc[VSTOP]; /* ========== send settings to the card ========== */ /* potential sleep here */ if (ccbp->hi_stat == IDLE_CLOSE) /* Not yet open */ si_command(pp, LOPEN, SI_WAIT); /* open it */ else si_command(pp, CONFIG, SI_WAIT); /* change params */ /* ========== set DTR etc ========== */ /* Hangup if ospeed == 0 */ if (t->c_ospeed == 0) { (void) si_modem(pp, BIC, TIOCM_DTR|TIOCM_RTS); } else { /* * If the previous speed was 0, may need to re-enable * the modem signals */ (void) si_modem(pp, SET, TIOCM_DTR|TIOCM_RTS); } DPRINT((pp, DBG_PARAM, "siparam, complete: MR1 %x MR2 %x HI_MASK %x PRTCL %x HI_BREAK %x\n", ccbp->hi_mr1, ccbp->hi_mr2, ccbp->hi_mask, ccbp->hi_prtcl, ccbp->hi_break)); splx(oldspl); out: return(error); } /* * Enable or Disable the writes to this channel... * "state" -> enabled = 1; disabled = 0; */ static void si_write_enable(pp, state) register struct si_port *pp; int state; { int oldspl; oldspl = spltty(); if (state) { pp->sp_state &= ~SS_BLOCKWRITE; if (pp->sp_state & SS_WAITWRITE) { pp->sp_state &= ~SS_WAITWRITE; /* thunder away! */ wakeup((caddr_t)pp); } } else { pp->sp_state |= SS_BLOCKWRITE; } splx(oldspl); } /* * Set/Get state of modem control lines. * Due to DCE-like behaviour of the adapter, some signals need translation: * TIOCM_DTR DSR * TIOCM_RTS CTS */ static int si_modem(pp, cmd, bits) struct si_port *pp; enum si_mctl cmd; int bits; { volatile struct si_channel *ccbp; int x; DPRINT((pp, DBG_ENTRY|DBG_MODEM, "si_modem(%x,%s,%x)\n", pp, si_mctl2str(cmd), bits)); ccbp = pp->sp_ccb; /* Find channel address */ switch (cmd) { case GET: x = ccbp->hi_ip; bits = TIOCM_LE; if (x & IP_DCD) bits |= TIOCM_CAR; if (x & IP_DTR) bits |= TIOCM_DTR; if (x & IP_RTS) bits |= TIOCM_RTS; if (x & IP_RI) bits |= TIOCM_RI; return(bits); case SET: ccbp->hi_op &= ~(OP_DSR|OP_CTS); /* fall through */ case BIS: x = 0; if (bits & TIOCM_DTR) x |= OP_DSR; if (bits & TIOCM_RTS) x |= OP_CTS; ccbp->hi_op |= x; break; case BIC: if (bits & TIOCM_DTR) ccbp->hi_op &= ~OP_DSR; if (bits & TIOCM_RTS) ccbp->hi_op &= ~OP_CTS; } return 0; } /* * Handle change of modem state */ static void si_modem_state(pp, tp, hi_ip) register struct si_port *pp; register struct tty *tp; register int hi_ip; { /* if a modem dev */ if (hi_ip & IP_DCD) { if ( !(pp->sp_last_hi_ip & IP_DCD)) { DPRINT((pp, DBG_INTR, "modem carr on t_line %d\n", tp->t_line)); (void)(*linesw[tp->t_line].l_modem)(tp, 1); } } else { if (pp->sp_last_hi_ip & IP_DCD) { DPRINT((pp, DBG_INTR, "modem carr off\n")); if ((*linesw[tp->t_line].l_modem)(tp, 0)) (void) si_modem(pp, SET, 0); } } pp->sp_last_hi_ip = hi_ip; } /* * Poller to catch missed interrupts. */ #ifdef POLL static void si_poll(void *nothing) { register struct si_softc *sc; register int i; volatile struct si_reg *regp; int lost, oldspl; DPRINT((0, DBG_POLL, "si_poll()\n")); if (in_intr) goto out; oldspl = spltty(); lost = 0; for (i=0; isc_type == NULL) continue; regp = (struct si_reg *)sc->sc_maddr; /* * See if there has been a pending interrupt for 2 seconds * or so. The test = 200) won't correspond * to 2 seconds if int_count gets changed. */ if (regp->int_pending != 0) { if (regp->int_scounter >= 200 && regp->initstat == 1) { printf("SLXOS si%d: lost intr\n", i); lost++; } } else { regp->int_scounter = 0; } } if (lost) siintr(-1); /* call intr with fake vector */ splx(oldspl); out: timeout(si_poll, (caddr_t)0L, POLL_INTERVAL); } #endif /* ifdef POLL */ /* * The interrupt handler polls ALL ports on ALL adapters each time * it is called. */ static BYTE rxbuf[SLXOS_BUFFERSIZE]; /* input staging area */ void siintr(int bdnum) { struct si_softc *Isc = NULL; register struct si_softc *sc; register struct si_port *pp; volatile struct si_channel *ccbp; register struct tty *tp; volatile caddr_t maddr; BYTE op, ip, cc; int x, card, port, n, i; volatile BYTE *z; BYTE c; static int in_poll = 0; if (bdnum < 0) { Isc = NULL; in_poll = 1; } else { Isc = &si_softc[bdnum]; } DPRINT((0, (Isc == 0)?DBG_POLL:DBG_INTR, "siintr(0x%x)\n", Isc)); if (in_intr != 0) { if (Isc == NULL) /* should never happen */ return; printf("SLXOS si%d: Warning interrupt handler re-entered\n", Isc==0 ? -1 : Isc->sc_dev.dv_unit); return; } in_intr = 1; /* * When we get an int we poll all the channels and do ALL pending * work, not just the first one we find. This allows all cards to * share the same vector. */ for (card=0; card < NSI; card++) { sc = &si_softc[card]; if (sc->sc_type == NULL) continue; switch(sc->sc_type) { case SIHOST : maddr = sc->sc_maddr; ((volatile struct si_reg *)maddr)->int_pending = 0; /* flag nothing pending */ *(maddr+SIINTCL) = 0x00; /* Set IRQ clear */ *(maddr+SIINTCL_CL) = 0x00; /* Clear IRQ clear */ break; case SIHOST2: maddr = sc->sc_maddr; ((volatile struct si_reg *)maddr)->int_pending = 0; *(maddr+SIPLIRQCLR) = 0x00; *(maddr+SIPLIRQCLR) = 0x10; break; case SIEISA: #if NEISA > 0 maddr = sc->sc_maddr; ((volatile struct si_reg *)maddr)->int_pending = 0; (void)inb(sc->sc_eisa_iobase+3); break; #endif /* fall through if not EISA kernel */ case SIEMPTY: default: continue; } ((volatile struct si_reg *)maddr)->int_scounter = 0; for (pp = sc->sc_ports, port=0; port < sc->sc_nport; pp++, port++) { ccbp = pp->sp_ccb; tp = pp->sp_tty; /* * See if a command has completed ? */ if (ccbp->hi_stat != pp->sp_pend) { DPRINT((pp, DBG_INTR, "siintr hi_stat = 0x%x, pend = %d\n", ccbp->hi_stat, pp->sp_pend)); switch(pp->sp_pend) { case LOPEN: case MPEND: case MOPEN: case CONFIG: pp->sp_pend = ccbp->hi_stat; /* sleeping in si_command */ wakeup(&pp->sp_state); break; default: pp->sp_pend = ccbp->hi_stat; } } /* * Continue on if it's closed */ if (ccbp->hi_stat == IDLE_CLOSE) { continue; } /* * Do modem state change if not a local device */ si_modem_state(pp, tp, ccbp->hi_ip); /* * Do break processing */ if (ccbp->hi_state & ST_BREAK) { if (tp->t_state & TS_CONNECTED && tp->t_state & TS_ISOPEN) { (*linesw[tp->t_line].l_rint)(TTY_BI, tp); } ccbp->hi_state &= ~ST_BREAK; /* A Bit iffy this */ DPRINT((pp, DBG_INTR, "si_intr break\n")); } /* * Do RX stuff - if not open then * dump any characters. */ if ((tp->t_state & TS_CONNECTED) == 0 || (tp->t_state & TS_ISOPEN) == 0) { ccbp->hi_rxopos = ccbp->hi_rxipos; } else { while ((c = ccbp->hi_rxipos - ccbp->hi_rxopos) != 0) { op = ccbp->hi_rxopos; ip = ccbp->hi_rxipos; n = c & 0xff; DPRINT((pp, DBG_INTR, "n = %d, op = %d, ip = %d\n", n, op, ip)); if (n <= SLXOS_BUFFERSIZE - op) { DPRINT((pp, DBG_INTR, "\tsingle copy\n")); z = ccbp->hi_rxbuf + op; bcopy((caddr_t)z, rxbuf, n); op += n; } else { x = SLXOS_BUFFERSIZE - op; DPRINT((pp, DBG_INTR, "\tdouble part 1 %d\n", x)); z = ccbp->hi_rxbuf + op; bcopy((caddr_t)z, rxbuf, x); DPRINT((pp, DBG_INTR, "\tdouble part 2 %d\n", n-x)); z = ccbp->hi_rxbuf; bcopy((caddr_t)z, rxbuf+x, n-x); op += n; } ccbp->hi_rxopos = op; DPRINT((pp, DBG_INTR, "n = %d, op = %d, ip = %d\n", n, op, ip)); /* * at this point... * n = number of chars placed in rxbuf */ /* * Avoid the grotesquely inefficient lineswitch routine * (ttyinput) in "raw" mode. It usually takes about 450 * instructions (that's without canonical processing or echo!). * slinput is reasonably fast (usually 40 instructions plus * call overhead). */ if (tp->t_state & TS_CAN_BYPASS_L_RINT) { /* block if the driver supports it */ if (tp->t_rawq.c_cc + n >= SI_I_HIGH_WATER && (tp->t_cflag & CRTS_IFLOW || tp->t_iflag & IXOFF) && !(tp->t_state & TS_TBLOCK)) ttyblock(tp); tk_nin += n; tk_rawcc += n; tp->t_rawcc += n; b_to_q((char *)rxbuf, n, &tp->t_rawq); ttwakeup(tp); if (tp->t_state & TS_TTSTOP && (tp->t_iflag & IXANY || tp->t_cc[VSTART] == tp->t_cc[VSTOP])) { tp->t_state &= ~TS_TTSTOP; tp->t_lflag &= ~FLUSHO; si_start(tp); } } else { for(x = 0; x < n; x++) { i = rxbuf[x]; (*linesw[tp->t_line].l_rint)(rxbuf[x], tp); if (pp->sp_hotchar && i == pp->sp_hotchar) { setsofttty(); } } } } /* end of RX while */ } /* end TS_CONNECTED */ /* * Do TX stuff */ (*linesw[tp->t_line].l_start)(tp); } /* end of for (all ports on this controller) */ } /* end of for (all controllers) */ in_poll = in_intr = 0; DPRINT((0, (Isc==0)?DBG_POLL:DBG_INTR, "end of siintr()\n")); } /* * Nudge the transmitter... */ static void si_start(tp) register struct tty *tp; { struct si_port *pp; volatile struct si_channel *ccbp; register struct clist *qp; register char *dptr; BYTE ipos; int nchar; int oldspl, count, n, amount, buffer_full; int do_exitproc; oldspl = spltty(); qp = &tp->t_outq; pp = TP2PP(tp); DPRINT((pp, DBG_ENTRY|DBG_START, "si_start(%x) t_state %x sp_state %x t_outq.c_cc %d\n", tp, tp->t_state, pp->sp_state, qp->c_cc)); if (tp->t_state & (TS_TIMEOUT|TS_TTSTOP)) goto out; do_exitproc = 0; buffer_full = 0; ccbp = pp->sp_ccb; /* * Handle the case where ttywait() is called on process exit * this may be BSDI specific, I dont know... */ if (tp->t_session != NULL && tp->t_session->s_leader != NULL && (tp->t_session->s_leader->p_flag & P_WEXIT)) { do_exitproc++; } count = (int)ccbp->hi_txipos - (int)ccbp->hi_txopos; DPRINT((pp, DBG_START, "count %d\n", (BYTE)count)); dptr = (char *)ccbp->hi_txbuf; /* data buffer */ while ((nchar = qp->c_cc) > 0) { if ((BYTE)count >= 255) { buffer_full++; break; } amount = min(nchar, (255 - (BYTE)count)); ipos = (unsigned int)ccbp->hi_txipos; /* will it fit in one lump? */ if ((SLXOS_BUFFERSIZE - ipos) >= amount) { n = q_to_b(&tp->t_outq, (char *)&ccbp->hi_txbuf[ipos], amount); } else { n = q_to_b(&tp->t_outq, (char *)&ccbp->hi_txbuf[ipos], SLXOS_BUFFERSIZE-ipos); if (n == SLXOS_BUFFERSIZE-ipos) { n += q_to_b(&tp->t_outq, (char *)&ccbp->hi_txbuf[0], amount - (SLXOS_BUFFERSIZE-ipos)); } } ccbp->hi_txipos += n; count = (int)ccbp->hi_txipos - (int)ccbp->hi_txopos; } if (count != 0 && nchar == 0) { tp->t_state |= TS_BUSY; } else { tp->t_state &= ~TS_BUSY; } /* wakeup time? */ ttwwakeup(tp); DPRINT((pp, DBG_START, "count %d, nchar %d, tp->t_state 0x%x\n", (BYTE)count, nchar, tp->t_state)); if ((tp->t_state & TS_BUSY) || do_exitproc) { int time; if (do_exitproc != 0) { time = hz / 10; } else { time = ttspeedtab(tp->t_ospeed, chartimes); if (time > 0) { if (time < nchar) time = nchar / time; else time = 2; } else { printf("SLXOS si%d: bad char time value!!\n", SI_CARD(tp->t_dev)); goto out; } } if ((pp->sp_state & (SS_LSTART|SS_INLSTART)) == SS_LSTART) { untimeout((timeout_func_t)si_lstart, (caddr_t)pp); } else { pp->sp_state |= SS_LSTART; } DPRINT((pp, DBG_START, "arming lstart, time=%d\n", time)); timeout((timeout_func_t)si_lstart, (caddr_t)pp, time); } out: splx(oldspl); DPRINT((pp, DBG_EXIT|DBG_START, "leave si_start()\n")); } /* * Note: called at splsoftclock from the timeout code * This has to deal with two things... cause wakeups while waiting for * tty drains on last process exit, and call l_start at about the right * time for protocols like ppp. */ static void si_lstart(pp) register struct si_port *pp; { register struct tty *tp; int oldspl; DPRINT((pp, DBG_ENTRY|DBG_LSTART, "si_lstart(%x) sp_state %x\n", pp, pp->sp_state)); oldspl = spltty(); if ((pp->sp_state & SS_OPEN) == 0 || (pp->sp_state & SS_LSTART) == 0) { splx(oldspl); return; } pp->sp_state &= ~SS_LSTART; pp->sp_state |= SS_INLSTART; tp = pp->sp_tty; /* deal with the process exit case */ ttwwakeup(tp); /* nudge protocols */ (*linesw[tp->t_line].l_start)(tp); pp->sp_state &= ~SS_INLSTART; splx(oldspl); } /* * Stop output on a line. called at spltty(); */ void sistop(tp, rw) register struct tty *tp; int rw; { volatile struct si_channel *ccbp; struct si_port *pp; pp = TP2PP(tp); ccbp = pp->sp_ccb; DPRINT((TP2PP(tp), DBG_ENTRY|DBG_STOP, "sistop(%x,%x)\n", tp, rw)); /* XXX: must check (rw & FWRITE | FREAD) etc flushing... */ if (rw & FWRITE) { /* what level are we meant to be flushing anyway? */ if (tp->t_state & TS_BUSY) { si_command(TP2PP(tp), WFLUSH, SI_NOWAIT); tp->t_state &= ~TS_BUSY; ttwwakeup(tp); /* Bruce???? */ } } #if 0 /* this doesn't work right yet.. */ if (rw & FREAD) { ccbp->hi_rxopos = ccbp->hi_rxipos; } #endif } /* * Issue a command to the Z280 host card CPU. */ static void si_command(pp, cmd, waitflag) struct si_port *pp; /* port control block (local) */ int cmd; int waitflag; { int oldspl; volatile struct si_channel *ccbp = pp->sp_ccb; int x; DPRINT((pp, DBG_ENTRY|DBG_PARAM, "si_command(%x,%x,%d): hi_stat 0x%x\n", pp, cmd, waitflag, ccbp->hi_stat)); oldspl = spltty(); /* Keep others out */ /* wait until it's finished what it was doing.. */ while((x = ccbp->hi_stat) != IDLE_OPEN && x != IDLE_CLOSE && x != cmd) { if (in_intr) { /* Prevent sleep in intr */ DPRINT((pp, DBG_PARAM, "cmd intr collision - completing %d\trequested %d\n", x, cmd)); splx(oldspl); return; } else if (ttysleep(pp->sp_tty, (caddr_t)&pp->sp_state, TTIPRI|PCATCH, "sicmd1", 1)) { splx(oldspl); return; } } /* it should now be in IDLE_OPEN, IDLE_CLOSE, or "cmd" */ /* if there was a pending command, cause a state-change wakeup */ if (pp->sp_pend != IDLE_OPEN) { switch(pp->sp_pend) { case LOPEN: case MPEND: case MOPEN: case CONFIG: wakeup(&pp->sp_state); break; default: break; } } pp->sp_pend = cmd; /* New command pending */ ccbp->hi_stat = cmd; /* Post it */ if (waitflag) { if (in_intr) { /* If in interrupt handler */ DPRINT((pp, DBG_PARAM, "attempt to sleep in si_intr - cmd req %d\n", cmd)); splx(oldspl); return; } else while(ccbp->hi_stat != IDLE_OPEN) { if (ttysleep(pp->sp_tty, (caddr_t)&pp->sp_state, TTIPRI|PCATCH, "sicmd2", 0)) break; } } splx(oldspl); } static void si_disc_optim(tp, t, pp) struct tty *tp; struct termios *t; struct si_port *pp; { /* * XXX can skip a lot more cases if Smarts. Maybe * (IGNCR | ISTRIP | IXON) in c_iflag. But perhaps we * shouldn't skip if (TS_CNTTB | TS_LNCH) is set in t_state. */ if (!(t->c_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP | IXON)) && (!(t->c_iflag & BRKINT) || (t->c_iflag & IGNBRK)) && (!(t->c_iflag & PARMRK) || (t->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) && !(t->c_lflag & (ECHO | ICANON | IEXTEN | ISIG | PENDIN)) && linesw[tp->t_line].l_rint == ttyinput) tp->t_state |= TS_CAN_BYPASS_L_RINT; else tp->t_state &= ~TS_CAN_BYPASS_L_RINT; /* * Prepare to reduce input latency for packet * discplines with a end of packet character. */ if (tp->t_line == SLIPDISC) pp->sp_hotchar = 0xc0; else if (tp->t_line == PPPDISC) pp->sp_hotchar = 0x7e; else pp->sp_hotchar = 0; DPRINT((pp, DBG_OPTIM, "bypass: %s, hotchar: %x\n", (tp->t_state & TS_CAN_BYPASS_L_RINT) ? "on" : "off", pp->sp_hotchar)); } #ifdef SI_DEBUG static void si_dprintf(pp, flags, str, a1, a2, a3, a4, a5, a6) struct si_port *pp; int flags; char *str; int a1, a2, a3, a4, a5, a6; { if ((pp == NULL && (si_debug&flags)) || (pp != NULL && ((pp->sp_debug&flags) || (si_debug&flags)))) { if (pp != NULL) printf("SLXOS %ci%d(%d): ", 's', SI_CARD(pp->sp_tty->t_dev), SI_PORT(pp->sp_tty->t_dev)); printf(str, a1, a2, a3, a4, a5, a6); } } static char * si_mctl2str(cmd) enum si_mctl cmd; { switch (cmd) { case GET: return("GET"); case SET: return("SET"); case BIS: return("BIS"); case BIC: return("BIC"); } return("BAD"); } #endif