/*- * Copyright (c) 2009-2010 * Swinburne University of Technology, Melbourne, Australia * Copyright (c) 2010 Lawrence Stewart * Copyright (c) 2010-2011 The FreeBSD Foundation * All rights reserved. * * This software was developed at the Centre for Advanced Internet * Architectures, Swinburne University, by David Hayes, made possible in part by * a grant from the Cisco University Research Program Fund at Community * Foundation Silicon Valley. * * Portions of this software were developed at the Centre for Advanced * Internet Architectures, Swinburne University of Technology, Melbourne, * Australia by David Hayes under sponsorship from the FreeBSD Foundation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include uma_zone_t txseginfo_zone; /* Smoothing factor for delayed ack guess. */ #define DLYACK_SMOOTH 5 /* Max number of time stamp errors allowed in a session. */ #define MAX_TS_ERR 10 static int ertt_packet_measurement_hook(int hhook_type, int hhook_id, void *udata, void *ctx_data, void *hdata, struct osd *hosd); static int ertt_add_tx_segment_info_hook(int hhook_type, int hhook_id, void *udata, void *ctx_data, void *hdata, struct osd *hosd); static int ertt_mod_init(void); static int ertt_mod_destroy(void); static int ertt_uma_ctor(void *mem, int size, void *arg, int flags); static void ertt_uma_dtor(void *mem, int size, void *arg); /* * Contains information about the sent segment for comparison with the * corresponding ack. */ struct txseginfo { /* Segment length. */ long len; /* Segment sequence number. */ tcp_seq seq; /* Time stamp indicating when the packet was sent. */ uint32_t tx_ts; /* Last received receiver ts (if the TCP option is used). */ uint32_t rx_ts; uint32_t flags; TAILQ_ENTRY (txseginfo) txsegi_lnk; }; /* Flags for struct txseginfo. */ #define TXSI_TSO 0x01 /* TSO was used for this entry. */ #define TXSI_RTT_MEASURE_START 0x02 /* Start a per RTT measurement. */ #define TXSI_RX_MEASURE_END 0x04 /* Measure the rx rate until this txsi. */ struct helper ertt_helper = { .mod_init = ertt_mod_init, .mod_destroy = ertt_mod_destroy, .h_flags = HELPER_NEEDS_OSD, .h_classes = HELPER_CLASS_TCP }; /* Define the helper hook info required by ERTT. */ struct hookinfo ertt_hooks[] = { { .hook_type = HHOOK_TYPE_TCP, .hook_id = HHOOK_TCP_EST_IN, .hook_udata = NULL, .hook_func = &ertt_packet_measurement_hook }, { .hook_type = HHOOK_TYPE_TCP, .hook_id = HHOOK_TCP_EST_OUT, .hook_udata = NULL, .hook_func = &ertt_add_tx_segment_info_hook } }; /* Flags to indicate how marked_packet_rtt should handle this txsi. */ #define MULTI_ACK 0x01 /* More than this txsi is acked. */ #define OLD_TXSI 0x02 /* TXSI is old according to timestamps. */ #define CORRECT_ACK 0X04 /* Acks this TXSI. */ #define FORCED_MEASUREMENT 0X08 /* Force an RTT measurement. */ /* * This fuction measures the RTT of a particular segment/ack pair, or the next * closest if this will yield an inaccurate result due to delayed acking or * other issues. */ static void inline marked_packet_rtt(struct txseginfo *txsi, struct ertt *e_t, struct tcpcb *tp, uint32_t *pmeasurenext, int *pmeasurenext_len, int *prtt_bytes_adjust, int mflag) { /* * If we can't measure this one properly due to delayed acking adjust * byte counters and flag to measure next txsi. Note that since the * marked packet's transmitted bytes are measured we need to subtract the * transmitted bytes. Then pretend the next txsi was marked. */ if (mflag & (MULTI_ACK|OLD_TXSI)) { *pmeasurenext = txsi->tx_ts; *pmeasurenext_len = txsi->len; *prtt_bytes_adjust += *pmeasurenext_len; } else { if (mflag & FORCED_MEASUREMENT) { e_t->markedpkt_rtt = ticks - *pmeasurenext + 1; e_t->bytes_tx_in_marked_rtt = e_t->bytes_tx_in_rtt + *pmeasurenext_len - *prtt_bytes_adjust; } else { e_t->markedpkt_rtt = ticks - txsi->tx_ts + 1; e_t->bytes_tx_in_marked_rtt = e_t->bytes_tx_in_rtt - *prtt_bytes_adjust; } e_t->marked_snd_cwnd = tp->snd_cwnd; /* * Reset the ERTT_MEASUREMENT_IN_PROGRESS flag to indicate to * add_tx_segment_info that a new measurement should be started. */ e_t->flags &= ~ERTT_MEASUREMENT_IN_PROGRESS; /* * Set ERTT_NEW_MEASUREMENT to tell the congestion control * algorithm that a new marked RTT measurement has has been made * and is available for use. */ e_t->flags |= ERTT_NEW_MEASUREMENT; if (tp->t_flags & TF_TSO) { /* Temporarily disable TSO to aid a new measurment. */ tp->t_flags &= ~TF_TSO; /* Keep track that we've disabled it. */ e_t->flags |= ERTT_TSO_DISABLED; } } } /* * Ertt_packet_measurements uses a small amount of state kept on each packet * sent to match incoming acknowledgements. This enables more accurate and * secure round trip time measurements. The resulting measurement is used for * congestion control algorithms which require a more accurate time. * Ertt_packet_measurements is called via the helper hook in tcp_input.c */ static int ertt_packet_measurement_hook(int hhook_type, int hhook_id, void *udata, void *ctx_data, void *hdata, struct osd *hosd) { struct ertt *e_t; struct tcpcb *tp; struct tcphdr *th; struct tcpopt *to; struct tcp_hhook_data *thdp; struct txseginfo *txsi; int acked, measurenext_len, multiack, new_sacked_bytes, rtt_bytes_adjust; uint32_t measurenext, rts; tcp_seq ack; KASSERT(ctx_data != NULL, ("%s: ctx_data is NULL!", __func__)); KASSERT(hdata != NULL, ("%s: hdata is NULL!", __func__)); e_t = (struct ertt *)hdata; thdp = ctx_data; tp = thdp->tp; th = thdp->th; to = thdp->to; new_sacked_bytes = (tp->sackhint.last_sack_ack != 0); measurenext = measurenext_len = multiack = rts = rtt_bytes_adjust = 0; acked = th->th_ack - tp->snd_una; INP_WLOCK_ASSERT(tp->t_inpcb); /* Packet has provided new acknowledgements. */ if (acked > 0 || new_sacked_bytes) { if (acked == 0 && new_sacked_bytes) { /* Use last sacked data. */ ack = tp->sackhint.last_sack_ack; } else ack = th->th_ack; txsi = TAILQ_FIRST(&e_t->txsegi_q); while (txsi != NULL) { rts = 0; /* Acknowledgement is acking more than this txsi. */ if (SEQ_GT(ack, txsi->seq + txsi->len)) { if (txsi->flags & TXSI_RTT_MEASURE_START || measurenext) { marked_packet_rtt(txsi, e_t, tp, &measurenext, &measurenext_len, &rtt_bytes_adjust, MULTI_ACK); } TAILQ_REMOVE(&e_t->txsegi_q, txsi, txsegi_lnk); uma_zfree(txseginfo_zone, txsi); txsi = TAILQ_FIRST(&e_t->txsegi_q); continue; } /* * Guess if delayed acks are being used by the receiver. * * XXXDH: A simple heuristic that could be improved */ if (!new_sacked_bytes) { if (acked > tp->t_maxseg) { e_t->dlyack_rx += (e_t->dlyack_rx < DLYACK_SMOOTH) ? 1 : 0; multiack = 1; } else if (acked > txsi->len) { multiack = 1; e_t->dlyack_rx += (e_t->dlyack_rx < DLYACK_SMOOTH) ? 1 : 0; } else if (acked == tp->t_maxseg || acked == txsi->len) { e_t->dlyack_rx -= (e_t->dlyack_rx > 0) ? 1 : 0; } /* Otherwise leave dlyack_rx the way it was. */ } /* * Time stamps are only to help match the txsi with the * received acknowledgements. */ if (e_t->timestamp_errors < MAX_TS_ERR && (to->to_flags & TOF_TS) != 0 && to->to_tsecr) { /* * Note: All packets sent with the offload will * have the same time stamp. If we are sending * on a fast interface and the t_maxseg is much * smaller than one tick, this will be fine. The * time stamp would be the same whether we were * using tso or not. However, if the interface * is slow, this will cause problems with the * calculations. If the interface is slow, there * is not reason to be using tso, and it should * be turned off. */ /* * If there are too many time stamp errors, time * stamps won't be trusted */ rts = to->to_tsecr; /* Before this packet. */ if (!e_t->dlyack_rx && TSTMP_LT(rts, txsi->tx_ts)) /* When delayed acking is used, the * reflected time stamp is of the first * packet and thus may be before * txsi->tx_ts. */ break; if (TSTMP_GT(rts, txsi->tx_ts)) { /* * If reflected time stamp is later than * tx_tsi, then this txsi is old. */ if (txsi->flags & TXSI_RTT_MEASURE_START || measurenext) { marked_packet_rtt(txsi, e_t, tp, &measurenext, &measurenext_len, &rtt_bytes_adjust, OLD_TXSI); } TAILQ_REMOVE(&e_t->txsegi_q, txsi, txsegi_lnk); uma_zfree(txseginfo_zone, txsi); txsi = TAILQ_FIRST(&e_t->txsegi_q); continue; } if (rts == txsi->tx_ts && TSTMP_LT(to->to_tsval, txsi->rx_ts)) { /* * Segment received before sent! * Something is wrong with the received * timestamps so increment errors. If * this keeps up we will ignore * timestamps. */ e_t->timestamp_errors++; } } /* * Acknowledging a sequence number before this txsi. * If it is an old txsi that may have had the same seq * numbers, it should have been removed if time stamps * are being used. */ if (SEQ_LEQ(ack, txsi->seq)) break; /* Before first packet in txsi. */ /* * Only ack > txsi->seq and ack <= txsi->seq+txsi->len * past this point. * * If delayed acks are being used, an acknowledgement * for a single segment will have been delayed by the * receiver and will yield an inaccurate measurement. In * this case, we only make the measurement if more than * one segment is being acknowledged or sack is * currently being used. */ if (!e_t->dlyack_rx || multiack || new_sacked_bytes) { /* Make an accurate new measurement. */ e_t->rtt = ticks - txsi->tx_ts + 1; if (e_t->rtt < e_t->minrtt || e_t->minrtt == 0) e_t->minrtt = e_t->rtt; if (e_t->rtt > e_t->maxrtt || e_t->maxrtt == 0) e_t->maxrtt = e_t->rtt; } if (txsi->flags & TXSI_RTT_MEASURE_START || measurenext) marked_packet_rtt(txsi, e_t, tp, &measurenext, &measurenext_len, &rtt_bytes_adjust, CORRECT_ACK); if (txsi->flags & TXSI_TSO) { txsi->len -= acked; if (txsi->len > 0) { /* * This presumes ack for first bytes in * txsi, this may not be true but it * shouldn't cause problems for the * timing. * * We remeasure RTT even though we only * have a single txsi. The rationale * behind this is that it is better to * have a slightly inaccurate * measurement than no additional * measurement for the rest of the bulk * transfer. Since TSO is only used on * high speed interface cards, so the * packets should be transmitted at line * rate back to back with little * difference in transmission times (in * ticks). */ txsi->seq += acked; /* * Reset txsi measure flag so we don't * use it for another RTT measurement. */ txsi->flags &= ~TXSI_RTT_MEASURE_START; /* * There is still more data to be acked * from tso bulk transmission, so we * won't remove it from the TAILQ yet. */ break; } } TAILQ_REMOVE(&e_t->txsegi_q, txsi, txsegi_lnk); uma_zfree(txseginfo_zone, txsi); break; } if (measurenext) { /* * We need to do a RTT measurement. It won't be the best * if we do it here. */ marked_packet_rtt(txsi, e_t, tp, &measurenext, &measurenext_len, &rtt_bytes_adjust, FORCED_MEASUREMENT); } } return (0); } /* * Add information about a transmitted segment to a list. * This is called via the helper hook in tcp_output.c */ static int ertt_add_tx_segment_info_hook(int hhook_type, int hhook_id, void *udata, void *ctx_data, void *hdata, struct osd *hosd) { struct ertt *e_t; struct tcpcb *tp; struct tcphdr *th; struct tcpopt *to; struct tcp_hhook_data *thdp; struct txseginfo *txsi; long len; int tso; KASSERT(ctx_data != NULL, ("%s: ctx_data is NULL!", __func__)); KASSERT(hdata != NULL, ("%s: hdata is NULL!", __func__)); e_t = (struct ertt *)hdata; thdp = ctx_data; tp = thdp->tp; th = thdp->th; to = thdp->to; len = thdp->len; tso = thdp->tso; INP_WLOCK_ASSERT(tp->t_inpcb); if (len > 0) { txsi = uma_zalloc(txseginfo_zone, M_NOWAIT); if (txsi != NULL) { /* Construct txsi setting the necessary flags. */ txsi->flags = 0; /* Needs to be initialised. */ txsi->seq = ntohl(th->th_seq); txsi->len = len; if (tso) txsi->flags |= TXSI_TSO; else if (e_t->flags & ERTT_TSO_DISABLED) { tp->t_flags |= TF_TSO; e_t->flags &= ~ERTT_TSO_DISABLED; } if (e_t->flags & ERTT_MEASUREMENT_IN_PROGRESS) { e_t->bytes_tx_in_rtt += len; } else { txsi->flags |= TXSI_RTT_MEASURE_START; e_t->flags |= ERTT_MEASUREMENT_IN_PROGRESS; e_t->bytes_tx_in_rtt = len; } if (((tp->t_flags & TF_NOOPT) == 0) && (to->to_flags & TOF_TS)) { txsi->tx_ts = ntohl(to->to_tsval) - tp->ts_offset; txsi->rx_ts = ntohl(to->to_tsecr); } else { txsi->tx_ts = ticks; txsi->rx_ts = 0; /* No received time stamp. */ } TAILQ_INSERT_TAIL(&e_t->txsegi_q, txsi, txsegi_lnk); } } return (0); } static int ertt_mod_init(void) { txseginfo_zone = uma_zcreate("ertt_txseginfo", sizeof(struct txseginfo), NULL, NULL, NULL, NULL, 0, 0); return (0); } static int ertt_mod_destroy(void) { uma_zdestroy(txseginfo_zone); return (0); } static int ertt_uma_ctor(void *mem, int size, void *arg, int flags) { struct ertt *e_t; e_t = mem; TAILQ_INIT(&e_t->txsegi_q); e_t->timestamp_errors = 0; e_t->minrtt = 0; e_t->maxrtt = 0; e_t->rtt = 0; e_t->flags = 0; e_t->dlyack_rx = 0; e_t->bytes_tx_in_rtt = 0; e_t->markedpkt_rtt = 0; return (0); } static void ertt_uma_dtor(void *mem, int size, void *arg) { struct ertt *e_t; struct txseginfo *n_txsi, *txsi; e_t = mem; txsi = TAILQ_FIRST(&e_t->txsegi_q); while (txsi != NULL) { n_txsi = TAILQ_NEXT(txsi, txsegi_lnk); uma_zfree(txseginfo_zone, txsi); txsi = n_txsi; } } KHELP_DECLARE_MOD_UMA(ertt, &ertt_helper, ertt_hooks, 1, sizeof(struct ertt), ertt_uma_ctor, ertt_uma_dtor);