.\" Copyright (c) 2007-2010 Daniel Braniss <danny@cs.huji.ac.il>
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd December 17, 2013
.Dt ISCSI.CONF 5
.Os
.Sh NAME
.Nm iscsi.conf
.Nd iSCSI initiator configuration file
.Sh DESCRIPTION
The file
.Nm ,
is used by the
.Xr iscsictl 8
and
.Xr iscontrol 8
utilities.
It contains declarations and parameter/key-options.
The syntax is very simple,
.D1 Li variable = value;
and they can be grouped via a
.Em block
declaration:
.Bf Li
.Bd -literal
	# this is a comment
	target_1 { # nickname
	   variable = value;
	   ...
	} # this must be on a line by itself.
.Ed
.Ef
.Pp
The following are specified in the iSCSI RFC 3720,
for a full description see sections 11/12 of the RFC.
.Bl -tag -width MaxConnections
.It Cm AuthMethod
currently only supported authentication method is CHAP, with
digest either MD5 or SHA.
Default is none.
.It Cm HeaderDigest
a
.Em digest
is calculated on the header of all iSCSI PDUs, and
checked.
Only CRC32C is implemented.
Default is none.
.It Cm DataDigest
same as for HeaderDigest, but on the data part of the iSCSI PDU.
(not yet tested)
.It Cm TargetName
is the name by which the target is known, not to be confused with
target address, either obtained via the target administrator, or
from a
.Em discovery session .
.It Cm InitiatorName
if not specified, defaults to
.Sy iqn.2005-01.il.ac.huji.cs:
.Aq hostname .
.It Cm TargetAddress
is of the form
.Sy domainname[:port][,portal-group-tag]
to quote the RFC:
.Bd -ragged -compact
The domainname can be specified as either a DNS host name, a
dotted-decimal IPv4 address, or a bracketed IPv6 address as specified
in [RFC2732].
.Ed
Note: portal-group-tag is unused at the moment.
.Em not implemented yet.
.It Cm MaxRecvDataSegmentLength
the maximum data segment length in
bytes it can receive in an iSCSI PDU, default is 8192.
.It Cm MaxOutstandingR2T
is used to calculate/negotiate the
.Em tag opening ,
can be overridden by the
.Sy tag
option.
.It Cm SessionType
either Discovery or Normal, default is Normal, see the
.Fl d
flag of
.Cm iscontrol .
.El
.sp
The following are not specified in the
.Sy RFC 3720
.Bl -tag -width sockbufsize
.It Cm port
The iSCSI port used by the iSCSI protocol, defaults to 3260.
.It Cm tags
Sets the
.Em tag opening
to the value specified.
.It Cm maxluns
overrides the compiled value of
.Sy luns ,
see
.Xr iscsi_initiator 4 .
This value can only be reduced.
.It Cm sockbufsize
sets the receiver and transmitter socket buffer size to
.Em size ,
in kilobytes.
The default is 128.
.El
.sp
If
.Em AuthMethod
is set to
.Cm CHAP ,
then the following must also be set:
.Bl -tag -width chapSecret
.It Cm chapSecret
this
.Em shared-secret .
Can be either an ASCII string (e.g. hello world), a hex string (e.g
0xababcd0987654321...), or base64 string (eg 0b...)
.It Cm chapIName
the chap-name, defaults to
.Em hostname .
.It Cm chapDigest
can be MD5 or SHA1.
.It Cm tgtChapName/tgtChapSecret
name and secret used for mutual CHAP; by default, mutual CHAP
is not used.
.El
.Sh FILES
.Bl -tag -width indent
.It Pa /etc/iscsi.conf
.El
.Sh EXAMPLES
.Bd -literal
#
# Globals
#
port = 3260
#
myiscsi { # nickname
   targetaddress	= iscsi1
   targetname		= iqn.1900.com.com:sn.123456
}
chaptest {
   targetaddress= 10.0.0.1;
   targetname	= iqn.1900.com.com:sn.123456
   initiatorname= iqn.2005-01.il.ac.huji.cs:nobody
   authmethod = CHAP; chapDigest = SHA1;
   chapsecret = 0x3713c3336d9a224c2791c873d3d2b174
   tags		= 256
}
.Ed
.Sh SEE ALSO
.Xr iscsi_initiator 4 ,
.Xr iscsictl 8 ,
.Xr iscontrol 8
.Sh STANDARDS
ISCSI RFC 3720
.\"Sh HISTORY
.\"Sh AUTHORS
.Sh BUGS
Some options have not been implemented, either they were found
to be unnecessary, or not understood, this can change in the future.
.br
The tags opening value is difficult to calculate, use wisely.