# Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. Neither the name of the project nor the names of its contributors # may be used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # There are sample scripts for IPsec configuration by manual keying. # A security association is uniquely identified by a triple consisting # of a Security Parameter Index (SPI), an IP Destination Address, and a # security protocol (AH or ESP) identifier. You must take care of these # parameters when you configure by manual keying. # ESP transport mode is recommended for TCP port number 110 between # Host-A and Host-B. Encryption algorithm is blowfish-cbc whose key # is "kamekame", and authentication algorithm is hmac-sha1 whose key # is "this is the test key". # # ============ ESP ============ # | | # Host-A Host-B # fec0::10 -------------------- fec0::11 # # At Host-A and Host-B, spdadd fec0::10[any] fec0::11[110] tcp -P out ipsec esp/transport/fec0::10-fec0::11/use ; spdadd fec0::11[110] fec0::10[any] tcp -P in ipsec esp/transport/fec0::11-fec0::10/use ; add fec0::10 fec0::11 esp 0x10001 -m transport -E blowfish-cbc "kamekame" -A hmac-sha1 "this is the test key" ; add fec0::11 fec0::10 esp 0x10002 -m transport -E blowfish-cbc "kamekame" -A hmac-sha1 "this is the test key" ; # "[any]" is wildcard of port number. Note that "[0]" is the number of # zero in port number. # Security protocol is old AH tunnel mode, i.e. RFC1826, with keyed-md5 # whose key is "this is the test" as authentication algorithm. # That protocol takes place between Gateway-A and Gateway-B. # # ======= AH ======= # | | # Network-A Gateway-A Gateway-B Network-B # 10.0.1.0/24 ---- 172.16.0.1 ----- 172.16.0.2 ---- 10.0.2.0/24 # # At Gateway-A: spdadd 10.0.1.0/24 10.0.2.0/24 any -P out ipsec ah/tunnel/172.16.0.1-172.16.0.2/require ; spdadd 10.0.2.0/24 10.0.1.0/24 any -P in ipsec ah/tunnel/172.16.0.2-172.16.0.1/require ; add 172.16.0.1 172.16.0.2 ah-old 0x10003 -m any -A keyed-md5 "this is the test" ; add 172.16.0.2 172.16.0.1 ah-old 0x10004 -m any -A keyed-md5 "this is the test" ; # If port number field is omitted such above then "[any]" is employed. # -m specifies the mode of SA to be used. "-m any" means wildcard of # mode of security protocol. You can use this SAs for both tunnel and # transport mode. # At Gateway-B. Attention to the selector and peer's IP address for tunnel. spdadd 10.0.2.0/24 10.0.1.0/24 any -P out ipsec ah/tunnel/172.16.0.2-172.16.0.1/require ; spdadd 10.0.1.0/24 10.0.2.0/24 any -P in ipsec ah/tunnel/172.16.0.1-172.16.0.2/require ; add 172.16.0.1 172.16.0.2 ah-old 0x10003 -m tunnel -A keyed-md5 "this is the test" ; add 172.16.0.2 172.16.0.1 ah-old 0x10004 -m tunnel -A keyed-md5 "this is the test" ; # AH transport mode followed by ESP tunnel mode is required between # Gateway-A and Gateway-B. # Encryption algorithm is 3des-cbc, and authentication algorithm for ESP # is hmac-sha1. Authentication algorithm for AH is hmac-md5. # # ========== AH ========= # | ======= ESP ===== | # | | | | # Network-A Gateway-A Gateway-B Network-B # fec0:0:0:1::/64 --- fec0:0:0:1::1 ---- fec0:0:0:2::1 --- fec0:0:0:2::/64 # # At Gateway-A: spdadd fec0:0:0:1::/64 fec0:0:0:2::/64 any -P out ipsec esp/tunnel/fec0:0:0:1::1-fec0:0:0:2::1/require ah/transport/fec0:0:0:1::1-fec0:0:0:2::1/require ; spdadd fec0:0:0:2::/64 fec0:0:0:1::/64 any -P in ipsec esp/tunnel/fec0:0:0:2::1-fec0:0:0:1::1/require ah/transport/fec0:0:0:2::1-fec0:0:0:1::1/require ; add fec0:0:0:1::1 fec0:0:0:2::1 esp 0x10001 -m tunnel -E 3des-cbc "kamekame12341234kame1234" -A hmac-sha1 "this is the test key" ; add fec0:0:0:1::1 fec0:0:0:2::1 ah 0x10001 -m transport -A hmac-md5 "this is the test" ; add fec0:0:0:2::1 fec0:0:0:1::1 esp 0x10001 -m tunnel -E 3des-cbc "kamekame12341234kame1234" -A hmac-sha1 "this is the test key" ; add fec0:0:0:2::1 fec0:0:0:1::1 ah 0x10001 -m transport -A hmac-md5 "this is the test" ; # ESP tunnel mode is required between Host-A and Gateway-A. # Encryption algorithm is cast128-cbc, and authentication algorithm # for ESP is hmac-sha1. # ESP transport mode is recommended between Host-A and Host-B. # Encryption algorithm is rc5-cbc, and authentication algorithm # for ESP is hmac-md5. # # ================== ESP ================= # | ======= ESP ======= | # | | | | # Host-A Gateway-A Host-B # fec0:0:0:1::1 ---- fec0:0:0:2::1 ---- fec0:0:0:2::2 # # At Host-A: spdadd fec0:0:0:1::1[any] fec0:0:0:2::2[80] tcp -P out ipsec esp/transport/fec0:0:0:1::1-fec0:0:0:2::2/use esp/tunnel/fec0:0:0:1::1-fec0:0:0:2::1/require ; spdadd fec0:0:0:2::1[80] fec0:0:0:1::1[any] tcp -P in ipsec esp/transport/fec0:0:0:2::2-fec0:0:0:1::1/use esp/tunnel/fec0:0:0:2::1-fec0:0:0:1::1/require ; add fec0:0:0:1::1 fec0:0:0:2::2 esp 0x10001 -m transport -E cast128-cbc "12341234" -A hmac-sha1 "this is the test key" ; add fec0:0:0:1::1 fec0:0:0:2::1 esp 0x10002 -E rc5-cbc "kamekame" -A hmac-md5 "this is the test" ; add fec0:0:0:2::2 fec0:0:0:1::1 esp 0x10003 -m transport -E cast128-cbc "12341234" -A hmac-sha1 "this is the test key" ; add fec0:0:0:2::1 fec0:0:0:1::1 esp 0x10004 -E rc5-cbc "kamekame" -A hmac-md5 "this is the test" ; # By "get" command, you can get an entry of either SP or SA. get fec0:0:0:1::1 fec0:0:0:2::2 ah 0x10004 ; # Also delete command, you can delete an entry of either SP or SA. spddelete fec0:0:0:1::/64 fec0:0:0:2::/64 any -P out; delete fec0:0:0:1::1 fec0:0:0:2::2 ah 0x10004 ; # By dump command, you can dump all entry of either SP or SA. dump ; spddump ; dump esp ; flush esp ; # By flush command, you can flush all entry of either SP or SA. flush ; spdflush ; # "flush" and "dump" commands can specify a security protocol. dump esp ; flush ah ; # XXX add ::1 ::1 esp 10001 -m transport -E simple ; add ::1 ::1 esp 10002 -m transport -E des-deriv "12341234" ; add ::1 ::1 esp-old 10003 -m transport -E des-32iv "12341234" ; add ::1 ::1 esp 10004 -m transport -E simple -A null ; add ::1 ::1 esp 10005 -m transport -E simple -A hmac-md5 "1234123412341234" ; add ::1 ::1 esp 10006 -m tunnel -E simple -A hmac-sha1 "12341234123412341234" ; add ::1 ::1 esp 10007 -m transport -E simple -A keyed-md5 "1234123412341234" ; add ::1 ::1 esp 10008 -m any -E simple -A keyed-sha1 "12341234123412341234" ; add ::1 ::1 esp 10009 -m transport -E des-cbc "testtest" ; add ::1 ::1 esp 10010 -m transport -E 3des-cbc "testtest12341234testtest" ; add ::1 ::1 esp 10011 -m tunnel -E cast128-cbc "testtest1234" ; add ::1 ::1 esp 10012 -m tunnel -E blowfish-cbc "testtest1234" ; add ::1 ::1 esp 10013 -m tunnel -E rc5-cbc "testtest1234" ; add ::1 ::1 esp 10014 -m any -E rc5-cbc "testtest1234" ; add ::1 ::1 esp 10015 -m transport -f zero-pad -E simple ; add ::1 ::1 esp 10016 -m tunnel -f random-pad -r 8 -lh 100 -ls 80 -E simple ; add ::1 ::1 esp 10017 -m transport -f seq-pad -f nocyclic-seq -E simple ; add ::1 ::1 esp 10018 -m transport -E simple ; #add ::1 ::1 ah 20000 -m transport -A null ; add ::1 ::1 ah 20001 -m any -A hmac-md5 "1234123412341234"; add ::1 ::1 ah 20002 -m tunnel -A hmac-sha1 "12341234123412341234"; add ::1 ::1 ah 20003 -m transport -A keyed-md5 "1234123412341234"; add ::1 ::1 ah-old 20004 -m transport -A keyed-md5 "1234123412341234"; add ::1 ::1 ah 20005 -m transport -A keyed-sha1 "12341234123412341234"; #add ::1 ::1 ipcomp 30000 -C oui ; add ::1 ::1 ipcomp 30001 -C deflate ; #add ::1 ::1 ipcomp 30002 -C lzs ; # enjoy.