# # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC98,v 1.65 1999/02/16 11:15:21 kato Exp $ # GENERIC98 -- Generic PC98 machine with WD/SCSI disks machine "pc98" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident "GENERIC98" maxusers 32 options "PC98" #PC98 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options EPSON_BOUNCEDMA #use bounce buufer for 15-16M #options EPSON_MEMWIN #EPSON memory window support options UCONSOLE #Allow users to grab the console #options "LINE30" options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options SYSVSHM options SYSVSEM options SYSVMSG options COM_MULTIPORT # # IBM-PC HDD support #options COMPAT_ATDISK config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 11 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 disk fd2 at fdc0 drive 2 disk fd3 at fdc0 drive 3 # options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 9 disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #disk wd2 at wdc0 drive 2 #disk wd3 at wdc0 drive 3 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahc0 controller isp0 # # WD33C93 SCSI card (55/92 like board) # options BS_TARG_SAFEMODE # PC-9801-92 controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0 # SC-98 # controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x10000 # HA-55BS2 and later #controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x20000 # ELECOM type #controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x30000 # SMIT #controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 iomem 0xdd000 iosiz 0x1000 flags 0x40000 # Logitec LHA-20x #controller bs0 at isa? port IO_SCSI bio irq 5 drq 3 flags 0x50000 #controller aic0 at isa? port 0x1840 bio irq 5 flags 0x10000 controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows controller matcd0 at isa? port? bio # keyboard driver device pckbd0 at isa? port IO_KBD tty irq 1 #options KBD_INSTALL_CDEV device gdc0 at isa? #pseudo-device splash device sc0 at isa? tty device npx0 at isa? port IO_NPX irq 8 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # # Serial Interface # # COM1 device sio0 at isa? port "IO_COM1" tty irq 4 # COM2 (2nd CCU) device sio1 at isa? port 0x238 tty irq 5 flags 0x12000000 # PC-9861K, PC-9801-101, MDC-926Rs #device sio1 at isa? port "IO_COM2" tty irq 5 flags 0x01000000 #device sio2 at isa? port "IO_COM3" tty irq 6 flags 0x02000000 # PC-9801-120 (PnP off) #device sio1 at isa? port 0x8b0 tty irq 5 flags 0x11000000 # MC-16550II, MC-RS98 #device sio1 at isa? port 0xd2 tty irq 5 flags 0x14000101 #device sio2 at isa? port 0x8d2 tty flags 0x14000101 # RSB-2000, RSB-3000, B98-02 #device sio1 at isa? port 0xb0 tty flags 0x15000101 #device sio2 at isa? port 0xb1 tty flags 0x15000101 # RSB-384 #device sio1 at isa? port 0xb0 tty flags 0x16000000 #device sio2 at isa? port 0xb1 tty flags 0x16000000 # RSA-98III #device sio1 at isa? port 0x50e0 tty irq 5 flags 0x18000101 #device sio2 at isa? port 0x51e0 tty flags 0x18000101 # ESP98 #options COM_ESP #device sio1 at isa? port 0x18b0 tty irq 5 flags 0x19000000 #device lpt0 at isa? port IO_LPT tty device mse0 at isa? port IO_MSE tty irq 13 # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ax0 device de0 device fxp0 device mx0 device pn0 device rl0 device tl0 device tx0 device vr0 device vx0 device wb0 device xl0 # # DP8390 NIC # # ed0: generic driver # ed1: LANEED LD-BDN # ed2: EGY-98 # ed3: LGY-98 # ed4: ICM-IF-2766/EN-2298-T # ed5: SIC-98 # ed6: PC-9801-108 # ed7: LA-98 # ed8: C-NET(98) # ed9: C-NET(98)E/L # fe0: RE1000/1000Plus # fe1: C-NET(98)P2/C-NET(9N)E # device ed0 at isa? port 0x00d0 net irq 6 device ed5 at isa? port 0x00d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0x600000 device ed1 at isa? port 0x00d8 net irq 6 flags 0x200000 device ed3 at isa? port 0x00d0 net irq 6 flags 0x400000 device ed4 at isa? port 0x56d0 net irq 5 flags 0x500000 device ed2 at isa? port 0x00d8 net irq 6 flags 0x300000 device ed7 at isa? port 0x00d0 net irq 6 flags 0x900000 device ed6 at isa? port 0x0770 net irq 6 flags 0x800000 device ed9 at isa? port 0x03d0 net irq 6 flags 0xb00000 device ed8 at isa? port 0xa3d0 net irq 6 iomem 0xd0000 iosiz 16384 flags 0xa00000 device ep0 at isa? port 0x40d0 net irq 3 device fe0 at isa? port 0x00d0 net irq 3 device fe1 at isa? port 0x73d0 net irq 5 device lnc0 at isa? port 0x03d0 net irq 6 device zp0 at isa? port 0x00d0 net irq 10 iomem 0xe0000 #controller snd0 #device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3 #device sbxvi0 at isa? drq 3 #device sbmidi0 at isa? port 0x80d2 #device opl0 at isa? port 0x28d2 #device pcm0 at isa? port 0xa460 irq 12 #device mss0 at isa? port 0xf40 irq 12 drq 1 pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter