/* Copyright (c) 1994, Matthew E. Kimmel. Permission is hereby granted * to use, copy, modify and distribute this software provided that both * the copyright notice and this permission notice appear in all copies * of the software, derivative works or modified versions, and any * portions thereof. * * Questions, comments, bug reports and fixes to kimmel@cs.umass.edu. * * $Id$ */ /* Except of course for the portions of code lifted from other FreeBSD * drivers (mainly elread, elget and el_ioctl) */ /* 3COM Etherlink 3C501 device driver for FreeBSD */ /* Yeah, I know these cards suck, but you can also get them for free * really easily... */ /* Bugs/possible improvements: * - Does not currently support DMA * - Does not currently support multicasts */ #include "el.h" #include "bpfilter.h" #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #ifdef IPX #include #include #endif #ifdef NS #include #include #endif #if NBPFILTER > 0 #include #include #endif #include #include #include /* For debugging convenience */ #ifdef EL_DEBUG #define dprintf(x) printf x #else #define dprintf(x) #endif /* el_softc: per line info and status */ static struct el_softc { struct arpcom arpcom; /* Ethernet common */ u_short el_base; /* Base I/O addr */ char el_pktbuf[EL_BUFSIZ]; /* Frame buffer */ } el_softc[NEL]; /* Prototypes */ static int el_attach(struct isa_device *); static void el_init(int); static int el_ioctl(struct ifnet *,int,caddr_t); static int el_probe(struct isa_device *); static void el_start(struct ifnet *); static void el_reset(int); static void el_watchdog(struct ifnet *); static void el_stop(int); static int el_xmit(struct el_softc *,int); static inline void elread(struct el_softc *,caddr_t,int); static struct mbuf *elget(caddr_t,int,int,struct ifnet *); static inline void el_hardreset(int); /* isa_driver structure for autoconf */ struct isa_driver eldriver = { el_probe, el_attach, "el" }; /* Probe routine. See if the card is there and at the right place. */ static int el_probe(struct isa_device *idev) { struct el_softc *sc; u_short base; /* Just for convenience */ u_char station_addr[ETHER_ADDR_LEN]; int i; /* Grab some info for our structure */ sc = &el_softc[idev->id_unit]; sc->el_base = idev->id_iobase; base = sc->el_base; /* First check the base */ if((base < 0x280) || (base > 0x3f0)) { printf("el%d: ioaddr must be between 0x280 and 0x3f0\n", idev->id_unit); return(0); } /* Now attempt to grab the station address from the PROM * and see if it contains the 3com vendor code. */ dprintf(("Probing 3c501 at 0x%x...\n",base)); /* Reset the board */ dprintf(("Resetting board...\n")); outb(base+EL_AC,EL_AC_RESET); DELAY(5); outb(base+EL_AC,0); dprintf(("Reading station address...\n")); /* Now read the address */ for(i=0;iarpcom.ac_enaddr,ETHER_ADDR_LEN); return(1); } } /* Attach the interface to the kernel data structures. By the time * this is called, we know that the card exists at the given I/O address. * We still assume that the IRQ given is correct. */ static int el_attach(struct isa_device *idev) { struct el_softc *sc; struct ifnet *ifp; struct ifaddr *ifa; struct sockaddr_dl *sdl; u_short base; dprintf(("Attaching el%d...\n",idev->id_unit)); /* Get things pointing to the right places. */ sc = &el_softc[idev->id_unit]; ifp = &sc->arpcom.ac_if; base = sc->el_base; /* Now reset the board */ dprintf(("Resetting board...\n")); el_hardreset(idev->id_unit); /* Initialize ifnet structure */ ifp->if_softc = sc; ifp->if_unit = idev->id_unit; ifp->if_name = "el"; ifp->if_mtu = ETHERMTU; ifp->if_output = ether_output; ifp->if_start = el_start; ifp->if_ioctl = el_ioctl; ifp->if_watchdog = el_watchdog; ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX); /* Now we can attach the interface */ dprintf(("Attaching interface...\n")); if_attach(ifp); ether_ifattach(ifp); /* Print out some information for the user */ printf("el%d: 3c501 address %6D\n",idev->id_unit, sc->arpcom.ac_enaddr, ":"); /* Finally, attach to bpf filter if it is present. */ #if NBPFILTER > 0 dprintf(("Attaching to BPF...\n")); bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif dprintf(("el_attach() finished.\n")); return(1); } /* This routine resets the interface. */ static void el_reset(int unit) { int s; dprintf(("elreset()\n")); s = splimp(); el_stop(unit); el_init(unit); splx(s); } static void el_stop(int unit) { struct el_softc *sc; sc = &el_softc[unit]; outb(sc->el_base+EL_AC,0); } /* Do a hardware reset of the 3c501. Do not call until after el_probe()! */ static inline void el_hardreset(int unit) { register struct el_softc *sc; register int base; register int j; sc = &el_softc[unit]; base = sc->el_base; /* First reset the board */ outb(base+EL_AC,EL_AC_RESET); DELAY(5); outb(base+EL_AC,0); /* Then give it back its ethernet address. Thanks to the mach * source code for this undocumented goodie... */ for(j=0;jarpcom.ac_enaddr[j]); } /* Initialize interface. */ static void el_init(int unit) { struct el_softc *sc; struct ifnet *ifp; int s; u_short base; /* Set up pointers */ sc = &el_softc[unit]; ifp = &sc->arpcom.ac_if; base = sc->el_base; /* If address not known, do nothing. */ if(TAILQ_EMPTY(&ifp->if_addrhead)) /* XXX unlikely */ return; s = splimp(); /* First, reset the board. */ dprintf(("Resetting board...\n")); el_hardreset(unit); /* Configure rx */ dprintf(("Configuring rx...\n")); if(ifp->if_flags & IFF_PROMISC) outb(base+EL_RXC,(EL_RXC_PROMISC|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW)); else outb(base+EL_RXC,(EL_RXC_ABROAD|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW)); outb(base+EL_RBC,0); /* Configure TX */ dprintf(("Configuring tx...\n")); outb(base+EL_TXC,0); /* Start reception */ dprintf(("Starting reception...\n")); outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX)); /* Set flags appropriately */ ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* And start output. */ el_start(ifp); splx(s); } /* Start output on interface. Get datagrams from the queue and output * them, giving the receiver a chance between datagrams. Call only * from splimp or interrupt level! */ static void el_start(struct ifnet *ifp) { struct el_softc *sc; u_short base; struct mbuf *m, *m0; int s, i, len, retries, done; /* Get things pointing in the right directions */ sc = ifp->if_softc; base = sc->el_base; dprintf(("el_start()...\n")); s = splimp(); /* Don't do anything if output is active */ if(sc->arpcom.ac_if.if_flags & IFF_OACTIVE) return; sc->arpcom.ac_if.if_flags |= IFF_OACTIVE; /* The main loop. They warned me against endless loops, but * would I listen? NOOO.... */ while(1) { /* Dequeue the next datagram */ IF_DEQUEUE(&sc->arpcom.ac_if.if_snd,m0); /* If there's nothing to send, return. */ if(m0 == NULL) { sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; splx(s); return; } /* Disable the receiver */ outb(base+EL_AC,EL_AC_HOST); outb(base+EL_RBC,0); /* Copy the datagram to the buffer. */ len = 0; for(m = m0; m != NULL; m = m->m_next) { if(m->m_len == 0) continue; bcopy(mtod(m,caddr_t),sc->el_pktbuf+len,m->m_len); len += m->m_len; } m_freem(m0); len = max(len,ETHER_MIN_LEN); /* Give the packet to the bpf, if any */ #if NBPFILTER > 0 if(sc->arpcom.ac_if.if_bpf) bpf_tap(&sc->arpcom.ac_if, sc->el_pktbuf, len); #endif /* Transfer datagram to board */ dprintf(("el: xfr pkt length=%d...\n",len)); i = EL_BUFSIZ - len; outb(base+EL_GPBL,(i & 0xff)); outb(base+EL_GPBH,((i>>8)&0xff)); outsb(base+EL_BUF,sc->el_pktbuf,len); /* Now transmit the datagram */ retries=0; done=0; while(!done) { if(el_xmit(sc,len)) { /* Something went wrong */ done = -1; break; } /* Check out status */ i = inb(base+EL_TXS); dprintf(("tx status=0x%x\n",i)); if(!(i & EL_TXS_READY)) { dprintf(("el: err txs=%x\n",i)); sc->arpcom.ac_if.if_oerrors++; if(i & (EL_TXS_COLL|EL_TXS_COLL16)) { if((!(i & EL_TXC_DCOLL16)) && retries < 15) { retries++; outb(base+EL_AC,EL_AC_HOST); } } else done = 1; } else { sc->arpcom.ac_if.if_opackets++; done = 1; } } if(done == -1) /* Packet not transmitted */ continue; /* Now give the card a chance to receive. * Gotta love 3c501s... */ (void)inb(base+EL_AS); outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX)); splx(s); /* Interrupt here */ s = splimp(); } } /* This function actually attempts to transmit a datagram downloaded * to the board. Call at splimp or interrupt, after downloading data! * Returns 0 on success, non-0 on failure */ static int el_xmit(struct el_softc *sc,int len) { int gpl; int i; gpl = EL_BUFSIZ - len; dprintf(("el: xmit...")); outb((sc->el_base)+EL_GPBL,(gpl & 0xff)); outb((sc->el_base)+EL_GPBH,((gpl>>8)&0xff)); outb((sc->el_base)+EL_AC,EL_AC_TXFRX); i = 20000; while((inb((sc->el_base)+EL_AS) & EL_AS_TXBUSY) && (i>0)) i--; if(i == 0) { dprintf(("tx not ready\n")); sc->arpcom.ac_if.if_oerrors++; return(-1); } dprintf(("%d cycles.\n",(20000-i))); return(0); } /* controller interrupt */ void elintr(int unit) { register struct el_softc *sc; register base; int stat, rxstat, len, done; /* Get things pointing properly */ sc = &el_softc[unit]; base = sc->el_base; dprintf(("elintr: ")); /* Check board status */ stat = inb(base+EL_AS); if(stat & EL_AS_RXBUSY) { (void)inb(base+EL_RXC); outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX)); return; } done = 0; while(!done) { rxstat = inb(base+EL_RXS); if(rxstat & EL_RXS_STALE) { (void)inb(base+EL_RXC); outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX)); return; } /* If there's an overflow, reinit the board. */ if(!(rxstat & EL_RXS_NOFLOW)) { dprintf(("overflow.\n")); el_hardreset(unit); /* Put board back into receive mode */ if(sc->arpcom.ac_if.if_flags & IFF_PROMISC) outb(base+EL_RXC,(EL_RXC_PROMISC|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW)); else outb(base+EL_RXC,(EL_RXC_ABROAD|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW)); (void)inb(base+EL_AS); outb(base+EL_RBC,0); (void)inb(base+EL_RXC); outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX)); return; } /* Incoming packet */ len = inb(base+EL_RBL); len |= inb(base+EL_RBH) << 8; dprintf(("receive len=%d rxstat=%x ",len,rxstat)); outb(base+EL_AC,EL_AC_HOST); /* If packet too short or too long, restore rx mode and return */ if((len <= sizeof(struct ether_header)) || (len > ETHER_MAX_LEN)) { if(sc->arpcom.ac_if.if_flags & IFF_PROMISC) outb(base+EL_RXC,(EL_RXC_PROMISC|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW)); else outb(base+EL_RXC,(EL_RXC_ABROAD|EL_RXC_AGF|EL_RXC_DSHORT|EL_RXC_DDRIB|EL_RXC_DOFLOW)); (void)inb(base+EL_AS); outb(base+EL_RBC,0); (void)inb(base+EL_RXC); outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX)); return; } sc->arpcom.ac_if.if_ipackets++; /* Copy the data into our buffer */ outb(base+EL_GPBL,0); outb(base+EL_GPBH,0); insb(base+EL_BUF,sc->el_pktbuf,len); outb(base+EL_RBC,0); outb(base+EL_AC,EL_AC_RX); dprintf(("%6D-->",sc->el_pktbuf+6,":")); dprintf(("%6D\n",sc->el_pktbuf,":")); /* Pass data up to upper levels */ len -= sizeof(struct ether_header); elread(sc,(caddr_t)(sc->el_pktbuf),len); /* Is there another packet? */ stat = inb(base+EL_AS); /* If so, do it all again (i.e. don't set done to 1) */ if(!(stat & EL_AS_RXBUSY)) dprintf((" ")); else done = 1; } (void)inb(base+EL_RXC); outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX)); return; } /* Pass a packet up to the higher levels. */ static inline void elread(struct el_softc *sc,caddr_t buf,int len) { register struct ether_header *eh; struct mbuf *m; eh = (struct ether_header *)buf; #if NBPFILTER > 0 /* * Check if there's a bpf filter listening on this interface. * If so, hand off the raw packet to bpf. */ if(sc->arpcom.ac_if.if_bpf) { bpf_tap(&sc->arpcom.ac_if, buf, len + sizeof(struct ether_header)); /* * Note that the interface cannot be in promiscuous mode if * there are no bpf listeners. And if el are in promiscuous * mode, el have to check if this packet is really ours. * * This test does not support multicasts. */ if((sc->arpcom.ac_if.if_flags & IFF_PROMISC) && bcmp(eh->ether_dhost,sc->arpcom.ac_enaddr, sizeof(eh->ether_dhost)) != 0 && bcmp(eh->ether_dhost,etherbroadcastaddr, sizeof(eh->ether_dhost)) != 0) return; } #endif /* * Pull packet off interface. */ m = elget(buf,len,0,&sc->arpcom.ac_if); if(m == 0) return; ether_input(&sc->arpcom.ac_if,eh,m); } /* * Pull read data off a interface. * Len is length of data, with local net header stripped. */ struct mbuf * elget(buf, totlen, off0, ifp) caddr_t buf; int totlen, off0; struct ifnet *ifp; { struct mbuf *top, **mp, *m; int off = off0, len; register caddr_t cp = buf; char *epkt; buf += sizeof(struct ether_header); cp = buf; epkt = cp + totlen; if (off) { cp += off + 2 * sizeof(u_short); totlen -= 2 * sizeof(u_short); } MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == 0) return (0); m->m_pkthdr.rcvif = ifp; m->m_pkthdr.len = totlen; m->m_len = MHLEN; top = 0; mp = ⊤ while (totlen > 0) { if (top) { MGET(m, M_DONTWAIT, MT_DATA); if (m == 0) { m_freem(top); return (0); } m->m_len = MLEN; } len = min(totlen, epkt - cp); if (len >= MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (m->m_flags & M_EXT) m->m_len = len = min(len, MCLBYTES); else len = m->m_len; } else { /* * Place initial small packet/header at end of mbuf. */ if (len < m->m_len) { if (top == 0 && len + max_linkhdr <= m->m_len) m->m_data += max_linkhdr; m->m_len = len; } else len = m->m_len; } bcopy(cp, mtod(m, caddr_t), (unsigned)len); cp += len; *mp = m; mp = &m->m_next; totlen -= len; if (cp == epkt) cp = buf; } return (top); } /* * Process an ioctl request. This code needs some work - it looks * pretty ugly. */ static int el_ioctl(ifp, command, data) register struct ifnet *ifp; int command; caddr_t data; { register struct ifaddr *ifa = (struct ifaddr *)data; struct el_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *)data; int s, error = 0; s = splimp(); switch (command) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: el_init(ifp->if_unit); /* before arpwhohas */ arp_ifinit((struct arpcom *)ifp, ifa); break; #endif #ifdef IPX /* * XXX - This code is probably wrong */ case AF_IPX: { register struct ipx_addr *ina = &(IA_SIPX(ifa)->sipx_addr); if (ipx_nullhost(*ina)) ina->x_host = *(union ipx_host *)(sc->arpcom.ac_enaddr); else { /* * */ bcopy((caddr_t)ina->x_host.c_host, (caddr_t)sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr)); } /* * Set new address */ el_init(ifp->if_unit); break; } #endif #ifdef NS /* * XXX - This code is probably wrong */ case AF_NS: { register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr); if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *)(sc->arpcom.ac_enaddr); else { /* * */ bcopy((caddr_t)ina->x_host.c_host, (caddr_t)sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr)); } /* * Set new address */ el_init(ifp->if_unit); break; } #endif default: el_init(ifp->if_unit); break; } break; case SIOCGIFADDR: { struct sockaddr *sa; sa = (struct sockaddr *)&ifr->ifr_data; bcopy((caddr_t)sc->arpcom.ac_enaddr, (caddr_t) sa->sa_data, ETHER_ADDR_LEN); } break; case SIOCSIFFLAGS: /* * If interface is marked down and it is running, then stop it */ if (((ifp->if_flags & IFF_UP) == 0) && (ifp->if_flags & IFF_RUNNING)) { el_stop(ifp->if_unit); ifp->if_flags &= ~IFF_RUNNING; } else { /* * If interface is marked up and it is stopped, then start it */ if ((ifp->if_flags & IFF_UP) && ((ifp->if_flags & IFF_RUNNING) == 0)) el_init(ifp->if_unit); } break; case SIOCSIFMTU: /* * Set the interface MTU. */ if (ifr->ifr_mtu > ETHERMTU) { error = EINVAL; } else { ifp->if_mtu = ifr->ifr_mtu; } break; default: error = EINVAL; } (void) splx(s); return (error); } /* Device timeout routine */ static void el_watchdog(struct ifnet *ifp) { log(LOG_ERR,"el%d: device timeout\n", ifp->if_unit); ifp->if_oerrors++; el_reset(ifp->if_unit); }