/*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2013,2014 Ilya Bakulin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for xpt_print below */ #include /* for PRIu64 */ #include "opt_cam.h" FEATURE(mmccam, "CAM-based MMC/SD/SDIO stack"); static struct cam_ed * mmc_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id); static void mmc_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg); static void mmc_action(union ccb *start_ccb); static void mmc_dev_advinfo(union ccb *start_ccb); static void mmc_announce_periph(struct cam_periph *periph); static void mmc_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *ccb); /* mmcprobe methods */ static cam_status mmcprobe_register(struct cam_periph *periph, void *arg); static void mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb); static void mmcprobe_cleanup(struct cam_periph *periph); static void mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb); static void mmc_proto_announce(struct cam_ed *device); static void mmc_proto_denounce(struct cam_ed *device); static void mmc_proto_debug_out(union ccb *ccb); typedef enum { PROBE_RESET, PROBE_IDENTIFY, PROBE_SDIO_RESET, PROBE_SEND_IF_COND, PROBE_SDIO_INIT, PROBE_MMC_INIT, PROBE_SEND_APP_OP_COND, PROBE_GET_CID, PROBE_GET_CSD, PROBE_SEND_RELATIVE_ADDR, PROBE_MMC_SET_RELATIVE_ADDR, PROBE_SELECT_CARD, PROBE_DONE, PROBE_INVALID } probe_action; static char *probe_action_text[] = { "PROBE_RESET", "PROBE_IDENTIFY", "PROBE_SDIO_RESET", "PROBE_SEND_IF_COND", "PROBE_SDIO_INIT", "PROBE_MMC_INIT", "PROBE_SEND_APP_OP_COND", "PROBE_GET_CID", "PROBE_GET_CSD", "PROBE_SEND_RELATIVE_ADDR", "PROBE_MMC_SET_RELATIVE_ADDR", "PROBE_SELECT_CARD", "PROBE_DONE", "PROBE_INVALID" }; #define PROBE_SET_ACTION(softc, newaction) \ do { \ char **text; \ text = probe_action_text; \ CAM_DEBUG((softc)->periph->path, CAM_DEBUG_PROBE, \ ("Probe %s to %s\n", text[(softc)->action], \ text[(newaction)])); \ (softc)->action = (newaction); \ } while(0) static struct xpt_xport_ops mmc_xport_ops = { .alloc_device = mmc_alloc_device, .action = mmc_action, .async = mmc_dev_async, .announce = mmc_announce_periph, }; #define MMC_XPT_XPORT(x, X) \ static struct xpt_xport mmc_xport_ ## x = { \ .xport = XPORT_ ## X, \ .name = #x, \ .ops = &mmc_xport_ops, \ }; \ CAM_XPT_XPORT(mmc_xport_ ## x); MMC_XPT_XPORT(mmc, MMCSD); static struct xpt_proto_ops mmc_proto_ops = { .announce = mmc_proto_announce, .denounce = mmc_proto_denounce, .debug_out = mmc_proto_debug_out, }; static struct xpt_proto mmc_proto = { .proto = PROTO_MMCSD, .name = "mmcsd", .ops = &mmc_proto_ops, }; CAM_XPT_PROTO(mmc_proto); typedef struct { probe_action action; int restart; union ccb saved_ccb; uint32_t flags; #define PROBE_FLAG_ACMD_SENT 0x1 /* CMD55 is sent, card expects ACMD */ #define PROBE_FLAG_HOST_CAN_DO_18V 0x2 /* Host can do 1.8V signaling */ uint8_t acmd41_count; /* how many times ACMD41 has been issued */ struct cam_periph *periph; } mmcprobe_softc; /* XPort functions -- an interface to CAM at periph side */ static struct cam_ed * mmc_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct cam_ed *device; device = xpt_alloc_device(bus, target, lun_id); if (device == NULL) return (NULL); device->quirk = NULL; device->mintags = 0; device->maxtags = 0; bzero(&device->inq_data, sizeof(device->inq_data)); device->inq_flags = 0; device->queue_flags = 0; device->serial_num = NULL; device->serial_num_len = 0; return (device); } static void mmc_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg) { /* * We only need to handle events for real devices. */ if (target->target_id == CAM_TARGET_WILDCARD || device->lun_id == CAM_LUN_WILDCARD) return; if (async_code == AC_LOST_DEVICE && (device->flags & CAM_DEV_UNCONFIGURED) == 0) { device->flags |= CAM_DEV_UNCONFIGURED; xpt_release_device(device); } } /* Taken from nvme_scan_lun, thanks to bsdimp@ */ static void mmc_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *request_ccb) { struct ccb_pathinq cpi; cam_status status; struct cam_periph *old_periph; int lock; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmc_scan_lun\n")); xpt_path_inq(&cpi, path); if (cpi.ccb_h.status != CAM_REQ_CMP) { if (request_ccb != NULL) { request_ccb->ccb_h.status = cpi.ccb_h.status; xpt_done(request_ccb); } return; } if (xpt_path_lun_id(path) == CAM_LUN_WILDCARD) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("mmd_scan_lun ignoring bus\n")); request_ccb->ccb_h.status = CAM_REQ_CMP; /* XXX signal error ? */ xpt_done(request_ccb); return; } lock = (xpt_path_owned(path) == 0); if (lock) xpt_path_lock(path); if ((old_periph = cam_periph_find(path, "mmcprobe")) != NULL) { if ((old_periph->flags & CAM_PERIPH_INVALID) == 0) { // mmcprobe_softc *softc; // softc = (mmcprobe_softc *)old_periph->softc; // Not sure if we need request ccb queue for mmc // TAILQ_INSERT_TAIL(&softc->request_ccbs, // &request_ccb->ccb_h, periph_links.tqe); // softc->restart = 1; CAM_DEBUG(path, CAM_DEBUG_INFO, ("Got scan request, but mmcprobe already exists\n")); request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; xpt_done(request_ccb); } else { request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; xpt_done(request_ccb); } } else { CAM_DEBUG(path, CAM_DEBUG_INFO, (" Set up the mmcprobe device...\n")); status = cam_periph_alloc(mmcprobe_register, NULL, mmcprobe_cleanup, mmcprobe_start, "mmcprobe", CAM_PERIPH_BIO, path, NULL, 0, request_ccb); if (status != CAM_REQ_CMP) { xpt_print(path, "xpt_scan_lun: cam_alloc_periph " "returned an error, can't continue probe\n"); } request_ccb->ccb_h.status = status; xpt_done(request_ccb); } if (lock) xpt_path_unlock(path); } static void mmc_action(union ccb *start_ccb) { CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mmc_action! func_code=%x, action %s\n", start_ccb->ccb_h.func_code, xpt_action_name(start_ccb->ccb_h.func_code))); switch (start_ccb->ccb_h.func_code) { case XPT_SCAN_BUS: /* FALLTHROUGH */ case XPT_SCAN_TGT: /* FALLTHROUGH */ case XPT_SCAN_LUN: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO, ("XPT_SCAN_{BUS,TGT,LUN}\n")); mmc_scan_lun(start_ccb->ccb_h.path->periph, start_ccb->ccb_h.path, start_ccb->crcn.flags, start_ccb); break; case XPT_DEV_ADVINFO: { mmc_dev_advinfo(start_ccb); break; } default: xpt_action_default(start_ccb); break; } } static void mmc_dev_advinfo(union ccb *start_ccb) { struct cam_ed *device; struct ccb_dev_advinfo *cdai; off_t amt; xpt_path_assert(start_ccb->ccb_h.path, MA_OWNED); start_ccb->ccb_h.status = CAM_REQ_INVALID; device = start_ccb->ccb_h.path->device; cdai = &start_ccb->cdai; CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("%s: request %x\n", __func__, cdai->buftype)); /* We don't support writing any data */ if (cdai->flags & CDAI_FLAG_STORE) panic("Attempt to store data?!"); switch(cdai->buftype) { case CDAI_TYPE_SCSI_DEVID: cdai->provsiz = device->device_id_len; if (device->device_id_len == 0) break; amt = MIN(cdai->provsiz, cdai->bufsiz); memcpy(cdai->buf, device->device_id, amt); break; case CDAI_TYPE_SERIAL_NUM: cdai->provsiz = device->serial_num_len; if (device->serial_num_len == 0) break; amt = MIN(cdai->provsiz, cdai->bufsiz); memcpy(cdai->buf, device->serial_num, amt); break; case CDAI_TYPE_PHYS_PATH: /* pass(4) wants this */ cdai->provsiz = 0; break; case CDAI_TYPE_MMC_PARAMS: cdai->provsiz = sizeof(struct mmc_params); amt = MIN(cdai->provsiz, cdai->bufsiz); memcpy(cdai->buf, &device->mmc_ident_data, amt); break; default: panic("Unknown buftype"); return; } start_ccb->ccb_h.status = CAM_REQ_CMP; } static void mmc_announce_periph(struct cam_periph *periph) { struct ccb_pathinq cpi; struct ccb_trans_settings cts; struct cam_path *path = periph->path; cam_periph_assert(periph, MA_OWNED); CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("mmc_announce_periph")); memset(&cts, 0, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NORMAL); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb*)&cts); if ((cts.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) return; xpt_path_inq(&cpi, periph->path); CAM_DEBUG(path, CAM_DEBUG_INFO, ("XPT info: CLK %04d, ...\n", cts.proto_specific.mmc.ios.clock)); } void mmccam_start_discovery(struct cam_sim *sim) { union ccb *ccb; uint32_t pathid; KASSERT(sim->sim_dev != NULL, ("mmccam_start_discovery(%s): sim_dev is not initialized," " has cam_sim_alloc_dev() been used?", cam_sim_name(sim))); pathid = cam_sim_path(sim); ccb = xpt_alloc_ccb(); /* * We create a rescan request for BUS:0:0, since the card * will be at lun 0. */ if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid, /* target */ 0, /* lun */ 0) != CAM_REQ_CMP) { xpt_free_ccb(ccb); return; } xpt_rescan(ccb); } /* This func is called per attached device :-( */ static void mmc_print_ident(struct mmc_params *ident_data, struct sbuf *sb) { bool space = false; sbuf_printf(sb, "Relative addr: %08x\n", ident_data->card_rca); sbuf_printf(sb, "Card features: <"); if (ident_data->card_features & CARD_FEATURE_MMC) { sbuf_printf(sb, "MMC"); space = true; } if (ident_data->card_features & CARD_FEATURE_MEMORY) { sbuf_printf(sb, "%sMemory", space ? " " : ""); space = true; } if (ident_data->card_features & CARD_FEATURE_SDHC) { sbuf_printf(sb, "%sHigh-Capacity", space ? " " : ""); space = true; } if (ident_data->card_features & CARD_FEATURE_SD20) { sbuf_printf(sb, "%sSD2.0-Conditions", space ? " " : ""); space = true; } if (ident_data->card_features & CARD_FEATURE_SDIO) { sbuf_printf(sb, "%sSDIO", space ? " " : ""); space = true; } if (ident_data->card_features & CARD_FEATURE_18V) { sbuf_printf(sb, "%s1.8-Signaling", space ? " " : ""); } sbuf_printf(sb, ">\n"); if (ident_data->card_features & CARD_FEATURE_MEMORY) sbuf_printf(sb, "Card memory OCR: %08x\n", ident_data->card_ocr); if (ident_data->card_features & CARD_FEATURE_SDIO) { sbuf_printf(sb, "Card IO OCR: %08x\n", ident_data->io_ocr); sbuf_printf(sb, "Number of functions: %u\n", ident_data->sdio_func_count); } sbuf_finish(sb); printf("%s", sbuf_data(sb)); sbuf_clear(sb); } static void mmc_proto_announce(struct cam_ed *device) { struct sbuf sb; char buffer[256]; sbuf_new(&sb, buffer, sizeof(buffer), SBUF_FIXEDLEN); mmc_print_ident(&device->mmc_ident_data, &sb); sbuf_finish(&sb); sbuf_putbuf(&sb); } static void mmc_proto_denounce(struct cam_ed *device) { mmc_proto_announce(device); } static void mmc_proto_debug_out(union ccb *ccb) { if (ccb->ccb_h.func_code != XPT_MMC_IO) return; CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_CDB,("mmc_proto_debug_out\n")); } static periph_init_t probe_periph_init; static struct periph_driver probe_driver = { probe_periph_init, "mmcprobe", TAILQ_HEAD_INITIALIZER(probe_driver.units), /* generation */ 0, CAM_PERIPH_DRV_EARLY }; PERIPHDRIVER_DECLARE(mmcprobe, probe_driver); #define CARD_ID_FREQUENCY 400000 /* Spec requires 400kHz max during ID phase. */ static void probe_periph_init(void) { } static cam_status mmcprobe_register(struct cam_periph *periph, void *arg) { mmcprobe_softc *softc; union ccb *request_ccb; /* CCB representing the probe request */ int status; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("mmcprobe_register\n")); request_ccb = (union ccb *)arg; if (request_ccb == NULL) { printf("mmcprobe_register: no probe CCB, " "can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (mmcprobe_softc *)malloc(sizeof(*softc), M_CAMXPT, M_NOWAIT); if (softc == NULL) { printf("proberegister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } softc->flags = 0; softc->acmd41_count = 0; periph->softc = softc; softc->periph = periph; softc->action = PROBE_INVALID; softc->restart = 0; status = cam_periph_acquire(periph); memset(&periph->path->device->mmc_ident_data, 0, sizeof(struct mmc_params)); if (status != 0) { printf("proberegister: cam_periph_acquire failed (status=%d)\n", status); return (CAM_REQ_CMP_ERR); } CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe started\n")); if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) PROBE_SET_ACTION(softc, PROBE_RESET); else PROBE_SET_ACTION(softc, PROBE_IDENTIFY); /* This will kick the ball */ xpt_schedule(periph, CAM_PRIORITY_XPT); return(CAM_REQ_CMP); } static int mmc_highest_voltage(uint32_t ocr) { int i; for (i = MMC_OCR_MAX_VOLTAGE_SHIFT; i >= MMC_OCR_MIN_VOLTAGE_SHIFT; i--) if (ocr & (1 << i)) return (i); return (-1); } static inline void init_standard_ccb(union ccb *ccb, uint32_t cmd) { ccb->ccb_h.func_code = cmd; ccb->ccb_h.flags = CAM_DIR_OUT; ccb->ccb_h.retry_count = 0; ccb->ccb_h.timeout = 15 * 1000; ccb->ccb_h.cbfcnp = mmcprobe_done; } static void mmcprobe_start(struct cam_periph *periph, union ccb *start_ccb) { mmcprobe_softc *softc; struct cam_path *path; struct ccb_mmcio *mmcio; struct mtx *p_mtx = cam_periph_mtx(periph); struct ccb_trans_settings_mmc *cts; CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_start\n")); softc = (mmcprobe_softc *)periph->softc; path = start_ccb->ccb_h.path; mmcio = &start_ccb->mmcio; cts = &start_ccb->cts.proto_specific.mmc; struct mmc_params *mmcp = &path->device->mmc_ident_data; memset(&mmcio->cmd, 0, sizeof(struct mmc_command)); if (softc->restart) { softc->restart = 0; if (path->device->flags & CAM_DEV_UNCONFIGURED) softc->action = PROBE_RESET; else softc->action = PROBE_IDENTIFY; } /* Here is the place where the identify fun begins */ switch (softc->action) { case PROBE_RESET: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_RESET\n")); /* FALLTHROUGH */ case PROBE_IDENTIFY: xpt_path_inq(&start_ccb->cpi, periph->path); CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_IDENTIFY\n")); init_standard_ccb(start_ccb, XPT_GET_TRAN_SETTINGS); xpt_action(start_ccb); if (cts->ios.power_mode != power_off) { init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS); cts->ios.power_mode = power_off; cts->ios_valid = MMC_PM; xpt_action(start_ccb); mtx_sleep(periph, p_mtx, 0, "mmcios", 100); } /* mmc_power_up */ /* Get the host OCR */ init_standard_ccb(start_ccb, XPT_GET_TRAN_SETTINGS); xpt_action(start_ccb); uint32_t host_caps = cts->host_caps; if (host_caps & MMC_CAP_SIGNALING_180) softc->flags |= PROBE_FLAG_HOST_CAN_DO_18V; uint32_t hv = mmc_highest_voltage(cts->host_ocr); init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS); cts->ios.vdd = hv; cts->ios.bus_mode = opendrain; cts->ios.chip_select = cs_dontcare; cts->ios.power_mode = power_up; cts->ios.bus_width = bus_width_1; cts->ios.clock = 0; cts->ios_valid = MMC_VDD | MMC_PM | MMC_BM | MMC_CS | MMC_BW | MMC_CLK; xpt_action(start_ccb); mtx_sleep(periph, p_mtx, 0, "mmcios", 100); init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS); cts->ios.power_mode = power_on; cts->ios.clock = CARD_ID_FREQUENCY; cts->ios.timing = bus_timing_normal; cts->ios_valid = MMC_PM | MMC_CLK | MMC_BT; xpt_action(start_ccb); mtx_sleep(periph, p_mtx, 0, "mmcios", 100); /* End for mmc_power_on */ /* Begin mmc_idle_cards() */ init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS); cts->ios.chip_select = cs_high; cts->ios_valid = MMC_CS; xpt_action(start_ccb); mtx_sleep(periph, p_mtx, 0, "mmcios", 1); CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Send first XPT_MMC_IO\n")); init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = MMC_GO_IDLE_STATE; /* CMD 0 */ mmcio->cmd.arg = 0; mmcio->cmd.flags = MMC_RSP_NONE | MMC_CMD_BC; mmcio->cmd.data = NULL; mmcio->stop.opcode = 0; /* XXX Reset I/O portion as well */ break; case PROBE_SDIO_RESET: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_SDIO_RESET\n")); uint32_t mmc_arg = SD_IO_RW_ADR(SD_IO_CCCR_CTL) | SD_IO_RW_DAT(CCCR_CTL_RES) | SD_IO_RW_WR | SD_IO_RW_RAW; cam_fill_mmcio(&start_ccb->mmcio, /*retries*/ 0, /*cbfcnp*/ mmcprobe_done, /*flags*/ CAM_DIR_NONE, /*mmc_opcode*/ SD_IO_RW_DIRECT, /*mmc_arg*/ mmc_arg, /*mmc_flags*/ MMC_RSP_R5 | MMC_CMD_AC, /*mmc_data*/ NULL, /*timeout*/ 1000); break; case PROBE_SEND_IF_COND: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_SEND_IF_COND\n")); init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = SD_SEND_IF_COND; /* CMD 8 */ mmcio->cmd.arg = (1 << 8) + 0xAA; mmcio->cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR; mmcio->stop.opcode = 0; break; case PROBE_SDIO_INIT: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_SDIO_INIT\n")); init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = IO_SEND_OP_COND; /* CMD 5 */ mmcio->cmd.arg = mmcp->io_ocr; mmcio->cmd.flags = MMC_RSP_R4; mmcio->stop.opcode = 0; break; case PROBE_MMC_INIT: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_MMC_INIT\n")); init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = MMC_SEND_OP_COND; /* CMD 1 */ mmcio->cmd.arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */; mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; mmcio->stop.opcode = 0; break; case PROBE_SEND_APP_OP_COND: init_standard_ccb(start_ccb, XPT_MMC_IO); if (softc->flags & PROBE_FLAG_ACMD_SENT) { mmcio->cmd.opcode = ACMD_SD_SEND_OP_COND; /* CMD 41 */ /* * We set CCS bit because we do support SDHC cards. * XXX: Don't set CCS if no response to CMD8. */ uint32_t cmd_arg = MMC_OCR_CCS | mmcp->card_ocr; /* CCS + ocr */ if (softc->acmd41_count < 10 && mmcp->card_ocr != 0 ) cmd_arg |= MMC_OCR_S18R; mmcio->cmd.arg = cmd_arg; mmcio->cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR; softc->acmd41_count++; } else { mmcio->cmd.opcode = MMC_APP_CMD; /* CMD 55 */ mmcio->cmd.arg = 0; /* rca << 16 */ mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; } mmcio->stop.opcode = 0; break; case PROBE_GET_CID: /* XXX move to mmc_da */ init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = MMC_ALL_SEND_CID; mmcio->cmd.arg = 0; mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; mmcio->stop.opcode = 0; break; case PROBE_SEND_RELATIVE_ADDR: init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = SD_SEND_RELATIVE_ADDR; mmcio->cmd.arg = 0; mmcio->cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; mmcio->stop.opcode = 0; break; case PROBE_MMC_SET_RELATIVE_ADDR: init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = MMC_SET_RELATIVE_ADDR; mmcio->cmd.arg = MMC_PROPOSED_RCA << 16; mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; mmcio->stop.opcode = 0; break; case PROBE_SELECT_CARD: init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = MMC_SELECT_CARD; mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16; mmcio->cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; mmcio->stop.opcode = 0; break; case PROBE_GET_CSD: /* XXX move to mmc_da */ init_standard_ccb(start_ccb, XPT_MMC_IO); mmcio->cmd.opcode = MMC_SEND_CSD; mmcio->cmd.arg = (uint32_t)path->device->mmc_ident_data.card_rca << 16; mmcio->cmd.flags = MMC_RSP_R2 | MMC_CMD_BCR; mmcio->stop.opcode = 0; break; case PROBE_DONE: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Start with PROBE_DONE\n")); init_standard_ccb(start_ccb, XPT_SET_TRAN_SETTINGS); cts->ios.bus_mode = pushpull; cts->ios_valid = MMC_BM; xpt_action(start_ccb); return; /* NOTREACHED */ break; case PROBE_INVALID: break; default: CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("probestart: invalid action state 0x%x\n", softc->action)); panic("default: case in mmc_probe_start()"); } start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; xpt_action(start_ccb); } static void mmcprobe_cleanup(struct cam_periph *periph) { free(periph->softc, M_CAMXPT); } static void mmcprobe_done(struct cam_periph *periph, union ccb *done_ccb) { mmcprobe_softc *softc; struct cam_path *path; int err; struct ccb_mmcio *mmcio; u_int32_t priority; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mmcprobe_done\n")); softc = (mmcprobe_softc *)periph->softc; path = done_ccb->ccb_h.path; priority = done_ccb->ccb_h.pinfo.priority; switch (softc->action) { case PROBE_RESET: /* FALLTHROUGH */ case PROBE_IDENTIFY: { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("done with PROBE_RESET\n")); mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("GO_IDLE_STATE failed with error %d\n", err)); /* There was a device there, but now it's gone... */ if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Device lost!\n")); xpt_async(AC_LOST_DEVICE, path, NULL); } PROBE_SET_ACTION(softc, PROBE_INVALID); break; } path->device->protocol = PROTO_MMCSD; PROBE_SET_ACTION(softc, PROBE_SEND_IF_COND); break; } case PROBE_SEND_IF_COND: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; struct mmc_params *mmcp = &path->device->mmc_ident_data; if (err != MMC_ERR_NONE || mmcio->cmd.resp[0] != 0x1AA) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("IF_COND: error %d, pattern %08x\n", err, mmcio->cmd.resp[0])); } else { mmcp->card_features |= CARD_FEATURE_SD20; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("SD 2.0 interface conditions: OK\n")); } PROBE_SET_ACTION(softc, PROBE_SDIO_RESET); break; } case PROBE_SDIO_RESET: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("SDIO_RESET: error %d, CCCR CTL register: %08x\n", err, mmcio->cmd.resp[0])); PROBE_SET_ACTION(softc, PROBE_SDIO_INIT); break; } case PROBE_SDIO_INIT: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; struct mmc_params *mmcp = &path->device->mmc_ident_data; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("SDIO_INIT: error %d, %08x %08x %08x %08x\n", err, mmcio->cmd.resp[0], mmcio->cmd.resp[1], mmcio->cmd.resp[2], mmcio->cmd.resp[3])); /* * Error here means that this card is not SDIO, * so proceed with memory init as if nothing has happened */ if (err != MMC_ERR_NONE) { PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); break; } mmcp->card_features |= CARD_FEATURE_SDIO; uint32_t ioifcond = mmcio->cmd.resp[0]; uint32_t io_ocr = ioifcond & R4_IO_OCR_MASK; mmcp->sdio_func_count = R4_IO_NUM_FUNCTIONS(ioifcond); CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("SDIO card: %d functions\n", mmcp->sdio_func_count)); if (io_ocr == 0) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("SDIO OCR invalid, retrying\n")); break; /* Retry */ } if (io_ocr != 0 && mmcp->io_ocr == 0) { mmcp->io_ocr = io_ocr; break; /* Retry, this time with non-0 OCR */ } CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("SDIO OCR: %08x\n", mmcp->io_ocr)); if (ioifcond & R4_IO_MEM_PRESENT) { /* Combo card -- proceed to memory initialization */ PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); } else { /* No memory portion -- get RCA and select card */ PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR); } break; } case PROBE_MMC_INIT: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; struct mmc_params *mmcp = &path->device->mmc_ident_data; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("MMC_INIT: error %d, resp %08x\n", err, mmcio->cmd.resp[0])); PROBE_SET_ACTION(softc, PROBE_INVALID); break; } CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("MMC card, OCR %08x\n", mmcio->cmd.resp[0])); if (mmcp->card_ocr == 0) { /* We haven't sent the OCR to the card yet -- do it */ mmcp->card_ocr = mmcio->cmd.resp[0]; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("-> sending OCR to card\n")); break; } if (!(mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY)) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Card is still powering up\n")); break; } mmcp->card_features |= CARD_FEATURE_MMC | CARD_FEATURE_MEMORY; PROBE_SET_ACTION(softc, PROBE_GET_CID); break; } case PROBE_SEND_APP_OP_COND: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("APP_OP_COND: error %d, resp %08x\n", err, mmcio->cmd.resp[0])); PROBE_SET_ACTION(softc, PROBE_MMC_INIT); break; } if (!(softc->flags & PROBE_FLAG_ACMD_SENT)) { /* Don't change the state */ softc->flags |= PROBE_FLAG_ACMD_SENT; break; } softc->flags &= ~PROBE_FLAG_ACMD_SENT; if ((mmcio->cmd.resp[0] & MMC_OCR_CARD_BUSY) || (mmcio->cmd.arg & MMC_OCR_VOLTAGE) == 0) { struct mmc_params *mmcp = &path->device->mmc_ident_data; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Card OCR: %08x\n", mmcio->cmd.resp[0])); if (mmcp->card_ocr == 0) { mmcp->card_ocr = mmcio->cmd.resp[0]; /* Now when we know OCR that we want -- send it to card */ CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("-> sending OCR to card\n")); } else { /* We already know the OCR and despite of that we * are processing the answer to ACMD41 -> move on */ PROBE_SET_ACTION(softc, PROBE_GET_CID); } /* Getting an answer to ACMD41 means the card has memory */ mmcp->card_features |= CARD_FEATURE_MEMORY; /* Standard capacity vs High Capacity memory card */ if (mmcio->cmd.resp[0] & MMC_OCR_CCS) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Card is SDHC\n")); mmcp->card_features |= CARD_FEATURE_SDHC; } /* Whether the card supports 1.8V signaling */ if (mmcio->cmd.resp[0] & MMC_OCR_S18A) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Card supports 1.8V signaling\n")); mmcp->card_features |= CARD_FEATURE_18V; if (softc->flags & PROBE_FLAG_HOST_CAN_DO_18V) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Host supports 1.8V signaling. Switch voltage!\n")); done_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; done_ccb->ccb_h.flags = CAM_DIR_NONE; done_ccb->ccb_h.retry_count = 0; done_ccb->ccb_h.timeout = 100; done_ccb->ccb_h.cbfcnp = NULL; done_ccb->cts.proto_specific.mmc.ios.vccq = vccq_180; done_ccb->cts.proto_specific.mmc.ios_valid = MMC_VCCQ; xpt_action(done_ccb); } } } else { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Card not ready: %08x\n", mmcio->cmd.resp[0])); /* Send CMD55+ACMD41 once again */ PROBE_SET_ACTION(softc, PROBE_SEND_APP_OP_COND); } break; } case PROBE_GET_CID: /* XXX move to mmc_da */ { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("PROBE_GET_CID: error %d\n", err)); PROBE_SET_ACTION(softc, PROBE_INVALID); break; } struct mmc_params *mmcp = &path->device->mmc_ident_data; memcpy(mmcp->card_cid, mmcio->cmd.resp, 4 * sizeof(uint32_t)); CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("CID %08x%08x%08x%08x\n", mmcp->card_cid[0], mmcp->card_cid[1], mmcp->card_cid[2], mmcp->card_cid[3])); if (mmcp->card_features & CARD_FEATURE_MMC) PROBE_SET_ACTION(softc, PROBE_MMC_SET_RELATIVE_ADDR); else PROBE_SET_ACTION(softc, PROBE_SEND_RELATIVE_ADDR); break; } case PROBE_SEND_RELATIVE_ADDR: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; struct mmc_params *mmcp = &path->device->mmc_ident_data; uint16_t rca = mmcio->cmd.resp[0] >> 16; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("Card published RCA: %u\n", rca)); path->device->mmc_ident_data.card_rca = rca; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("PROBE_SEND_RELATIVE_ADDR: error %d\n", err)); PROBE_SET_ACTION(softc, PROBE_INVALID); break; } /* If memory is present, get CSD, otherwise select card */ if (mmcp->card_features & CARD_FEATURE_MEMORY) PROBE_SET_ACTION(softc, PROBE_GET_CSD); else PROBE_SET_ACTION(softc, PROBE_SELECT_CARD); break; } case PROBE_MMC_SET_RELATIVE_ADDR: mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("PROBE_MMC_SET_RELATIVE_ADDR: error %d\n", err)); PROBE_SET_ACTION(softc, PROBE_INVALID); break; } path->device->mmc_ident_data.card_rca = MMC_PROPOSED_RCA; PROBE_SET_ACTION(softc, PROBE_GET_CSD); break; case PROBE_GET_CSD: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("PROBE_GET_CSD: error %d\n", err)); PROBE_SET_ACTION(softc, PROBE_INVALID); break; } struct mmc_params *mmcp = &path->device->mmc_ident_data; memcpy(mmcp->card_csd, mmcio->cmd.resp, 4 * sizeof(uint32_t)); CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("CSD %08x%08x%08x%08x\n", mmcp->card_csd[0], mmcp->card_csd[1], mmcp->card_csd[2], mmcp->card_csd[3])); PROBE_SET_ACTION(softc, PROBE_SELECT_CARD); break; } case PROBE_SELECT_CARD: { mmcio = &done_ccb->mmcio; err = mmcio->cmd.error; if (err != MMC_ERR_NONE) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("PROBE_SEND_RELATIVE_ADDR: error %d\n", err)); PROBE_SET_ACTION(softc, PROBE_INVALID); break; } PROBE_SET_ACTION(softc, PROBE_DONE); break; } default: CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_done: invalid action state 0x%x\n", softc->action)); panic("default: case in mmc_probe_done()"); } if (softc->action == PROBE_INVALID && (path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { xpt_async(AC_LOST_DEVICE, path, NULL); } if (softc->action != PROBE_INVALID) xpt_schedule(periph, priority); /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ int frozen = cam_release_devq(path, 0, 0, 0, FALSE); CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("mmcprobe_done: remaining freeze count %d\n", frozen)); if (softc->action == PROBE_DONE) { /* Notify the system that the device is found! */ if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, path, done_ccb); } } xpt_release_ccb(done_ccb); if (softc->action == PROBE_DONE || softc->action == PROBE_INVALID) { cam_periph_invalidate(periph); cam_periph_release_locked(periph); } } void mmc_path_inq(struct ccb_pathinq *cpi, const char *hba, const struct cam_sim *sim, size_t maxio) { cpi->version_num = 1; cpi->hba_inquiry = 0; cpi->target_sprt = 0; cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN; cpi->hba_eng_cnt = 0; cpi->max_target = 0; cpi->max_lun = 0; cpi->initiator_id = 1; cpi->maxio = maxio; strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, hba, HBA_IDLEN); strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); cpi->unit_number = cam_sim_unit(sim); cpi->bus_id = cam_sim_bus(sim); cpi->protocol = PROTO_MMCSD; cpi->protocol_version = SCSI_REV_0; cpi->transport = XPORT_MMCSD; cpi->transport_version = 1; cpi->base_transfer_speed = 100; /* XXX WTF? */ cpi->ccb_h.status = CAM_REQ_CMP; }