/* * Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es) * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * * MAINTAINER: Matthew N. Dodd * */ #include __FBSDID("$FreeBSD$"); /* * Intel EtherExpress Pro/10, Pro/10+ Ethernet driver * * Revision history: * * dd-mmm-yyyy: Multicast support ported from NetBSD's if_iy driver. * 30-Oct-1996: first beta version. Inet and BPF supported, but no multicast. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef EXDEBUG # define Start_End 1 # define Rcvd_Pkts 2 # define Sent_Pkts 4 # define Status 8 static int debug_mask = 0; # define DODEBUG(level, action) if (level & debug_mask) action #else # define DODEBUG(level, action) #endif devclass_t ex_devclass; char irq2eemap[] = { -1, -1, 0, 1, -1, 2, -1, -1, -1, 0, 3, 4, -1, -1, -1, -1 }; u_char ee2irqmap[] = { 9, 3, 5, 10, 11, 0, 0, 0 }; char plus_irq2eemap[] = { -1, -1, -1, 0, 1, 2, -1, 3, -1, 4, 5, 6, 7, -1, -1, -1 }; u_char plus_ee2irqmap[] = { 3, 4, 5, 7, 9, 10, 11, 12 }; /* Network Interface Functions */ static void ex_init(void *); static void ex_start(struct ifnet *); static int ex_ioctl(struct ifnet *, u_long, caddr_t); static void ex_watchdog(struct ifnet *); /* ifmedia Functions */ static int ex_ifmedia_upd(struct ifnet *); static void ex_ifmedia_sts(struct ifnet *, struct ifmediareq *); static int ex_get_media(struct ex_softc *); static void ex_reset(struct ex_softc *); static void ex_setmulti(struct ex_softc *); static void ex_tx_intr(struct ex_softc *); static void ex_rx_intr(struct ex_softc *); void ex_get_address(struct ex_softc *sc, u_char *enaddr) { uint16_t eaddr_tmp; eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Lo); enaddr[5] = eaddr_tmp & 0xff; enaddr[4] = eaddr_tmp >> 8; eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Mid); enaddr[3] = eaddr_tmp & 0xff; enaddr[2] = eaddr_tmp >> 8; eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Hi); enaddr[1] = eaddr_tmp & 0xff; enaddr[0] = eaddr_tmp >> 8; return; } int ex_card_type(u_char *enaddr) { if ((enaddr[0] == 0x00) && (enaddr[1] == 0xA0) && (enaddr[2] == 0xC9)) return (CARD_TYPE_EX_10_PLUS); return (CARD_TYPE_EX_10); } /* * Caller is responsible for eventually calling * ex_release_resources() on failure. */ int ex_alloc_resources(device_t dev) { struct ex_softc * sc = device_get_softc(dev); int error = 0; sc->ioport = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &sc->ioport_rid, RF_ACTIVE); if (!sc->ioport) { device_printf(dev, "No I/O space?!\n"); error = ENOMEM; goto bad; } sc->bst = rman_get_bustag(sc->ioport); sc->bsh = rman_get_bushandle(sc->ioport); sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid, RF_ACTIVE); if (!sc->irq) { device_printf(dev, "No IRQ?!\n"); error = ENOMEM; goto bad; } bad: return (error); } void ex_release_resources(device_t dev) { struct ex_softc * sc = device_get_softc(dev); if (sc->ih) { bus_teardown_intr(dev, sc->irq, sc->ih); sc->ih = NULL; } if (sc->ioport) { bus_release_resource(dev, SYS_RES_IOPORT, sc->ioport_rid, sc->ioport); sc->ioport = NULL; } if (sc->irq) { bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq); sc->irq = NULL; } return; } int ex_attach(device_t dev) { struct ex_softc * sc = device_get_softc(dev); struct ifnet * ifp = &sc->arpcom.ac_if; struct ifmedia * ifm; uint16_t temp; /* work out which set of irq <-> internal tables to use */ if (ex_card_type(sc->arpcom.ac_enaddr) == CARD_TYPE_EX_10_PLUS) { sc->irq2ee = plus_irq2eemap; sc->ee2irq = plus_ee2irqmap; } else { sc->irq2ee = irq2eemap; sc->ee2irq = ee2irqmap; } sc->mem_size = CARD_RAM_SIZE; /* XXX This should be read from the card itself. */ /* * Initialize the ifnet structure. */ ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST | IFF_NEEDSGIANT; ifp->if_start = ex_start; ifp->if_ioctl = ex_ioctl; ifp->if_watchdog = ex_watchdog; ifp->if_init = ex_init; ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; ifmedia_init(&sc->ifmedia, 0, ex_ifmedia_upd, ex_ifmedia_sts); temp = ex_eeprom_read(sc, EE_W5); if (temp & EE_W5_PORT_TPE) ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); if (temp & EE_W5_PORT_BNC) ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_2, 0, NULL); if (temp & EE_W5_PORT_AUI) ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL); ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->ifmedia, ex_get_media(sc)); ifm = &sc->ifmedia; ifm->ifm_media = ifm->ifm_cur->ifm_media; ex_ifmedia_upd(ifp); /* * Attach the interface. */ ether_ifattach(ifp, sc->arpcom.ac_enaddr); return(0); } int ex_detach(device_t dev) { struct ex_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); ifp = &sc->arpcom.ac_if; ex_stop(sc); ifp->if_flags &= ~IFF_RUNNING; ether_ifdetach(ifp); ex_release_resources(dev); return (0); } static void ex_init(void *xsc) { struct ex_softc * sc = (struct ex_softc *) xsc; struct ifnet * ifp = &sc->arpcom.ac_if; int s; int i; unsigned short temp_reg; DODEBUG(Start_End, printf("%s: ex_init: start\n", ifp->if_xname);); s = splimp(); ifp->if_timer = 0; /* * Load the ethernet address into the card. */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); temp_reg = CSR_READ_1(sc, EEPROM_REG); if (temp_reg & Trnoff_Enable) { CSR_WRITE_1(sc, EEPROM_REG, temp_reg & ~Trnoff_Enable); } for (i = 0; i < ETHER_ADDR_LEN; i++) { CSR_WRITE_1(sc, I_ADDR_REG0 + i, sc->arpcom.ac_enaddr[i]); } /* * - Setup transmit chaining and discard bad received frames. * - Match broadcast. * - Clear test mode. * - Set receiving mode. * - Set IRQ number. */ CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) | Tx_Chn_Int_Md | Tx_Chn_ErStp | Disc_Bad_Fr); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | No_SA_Ins | RX_CRC_InMem); CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3) & 0x3f /* XXX constants. */ ); CSR_WRITE_1(sc, CMD_REG, Bank1_Sel); CSR_WRITE_1(sc, INT_NO_REG, (CSR_READ_1(sc, INT_NO_REG) & 0xf8) | sc->irq2ee[sc->irq_no]); /* * Divide the available memory in the card into rcv and xmt buffers. * By default, I use the first 3/4 of the memory for the rcv buffer, * and the remaining 1/4 of the memory for the xmt buffer. */ sc->rx_mem_size = sc->mem_size * 3 / 4; sc->tx_mem_size = sc->mem_size - sc->rx_mem_size; sc->rx_lower_limit = 0x0000; sc->rx_upper_limit = sc->rx_mem_size - 2; sc->tx_lower_limit = sc->rx_mem_size; sc->tx_upper_limit = sc->mem_size - 2; CSR_WRITE_1(sc, RCV_LOWER_LIMIT_REG, sc->rx_lower_limit >> 8); CSR_WRITE_1(sc, RCV_UPPER_LIMIT_REG, sc->rx_upper_limit >> 8); CSR_WRITE_1(sc, XMT_LOWER_LIMIT_REG, sc->tx_lower_limit >> 8); CSR_WRITE_1(sc, XMT_UPPER_LIMIT_REG, sc->tx_upper_limit >> 8); /* * Enable receive and transmit interrupts, and clear any pending int. */ CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) | TriST_INT); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); CSR_WRITE_1(sc, MASK_REG, All_Int & ~(Rx_Int | Tx_Int)); CSR_WRITE_1(sc, STATUS_REG, All_Int); /* * Initialize receive and transmit ring buffers. */ CSR_WRITE_2(sc, RCV_BAR, sc->rx_lower_limit); sc->rx_head = sc->rx_lower_limit; CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_upper_limit | 0xfe); CSR_WRITE_2(sc, XMT_BAR, sc->tx_lower_limit); sc->tx_head = sc->tx_tail = sc->tx_lower_limit; ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE init\n");); ex_setmulti(sc); /* * Final reset of the board, and enable operation. */ CSR_WRITE_1(sc, CMD_REG, Sel_Reset_CMD); DELAY(2); CSR_WRITE_1(sc, CMD_REG, Rcv_Enable_CMD); ex_start(ifp); splx(s); DODEBUG(Start_End, printf("%s: ex_init: finish\n", ifp->if_xname);); } static void ex_start(struct ifnet *ifp) { struct ex_softc * sc = ifp->if_softc; int i, s, len, data_len, avail, dest, next; unsigned char tmp16[2]; struct mbuf * opkt; struct mbuf * m; DODEBUG(Start_End, printf("ex_start%d: start\n", unit);); s = splimp(); /* * Main loop: send outgoing packets to network card until there are no * more packets left, or the card cannot accept any more yet. */ while (((opkt = ifp->if_snd.ifq_head) != NULL) && !(ifp->if_flags & IFF_OACTIVE)) { /* * Ensure there is enough free transmit buffer space for * this packet, including its header. Note: the header * cannot wrap around the end of the transmit buffer and * must be kept together, so we allow space for twice the * length of the header, just in case. */ for (len = 0, m = opkt; m != NULL; m = m->m_next) { len += m->m_len; } data_len = len; DODEBUG(Sent_Pkts, printf("1. Sending packet with %d data bytes. ", data_len);); if (len & 1) { len += XMT_HEADER_LEN + 1; } else { len += XMT_HEADER_LEN; } if ((i = sc->tx_tail - sc->tx_head) >= 0) { avail = sc->tx_mem_size - i; } else { avail = -i; } DODEBUG(Sent_Pkts, printf("i=%d, avail=%d\n", i, avail);); if (avail >= len + XMT_HEADER_LEN) { IF_DEQUEUE(&ifp->if_snd, opkt); #ifdef EX_PSA_INTR /* * Disable rx and tx interrupts, to avoid corruption * of the host address register by interrupt service * routines. * XXX Is this necessary with splimp() enabled? */ CSR_WRITE_1(sc, MASK_REG, All_Int); #endif /* * Compute the start and end addresses of this * frame in the tx buffer. */ dest = sc->tx_tail; next = dest + len; if (next > sc->tx_upper_limit) { if ((sc->tx_upper_limit + 2 - sc->tx_tail) <= XMT_HEADER_LEN) { dest = sc->tx_lower_limit; next = dest + len; } else { next = sc->tx_lower_limit + next - sc->tx_upper_limit - 2; } } /* * Build the packet frame in the card's ring buffer. */ DODEBUG(Sent_Pkts, printf("2. dest=%d, next=%d. ", dest, next);); CSR_WRITE_2(sc, HOST_ADDR_REG, dest); CSR_WRITE_2(sc, IO_PORT_REG, Transmit_CMD); CSR_WRITE_2(sc, IO_PORT_REG, 0); CSR_WRITE_2(sc, IO_PORT_REG, next); CSR_WRITE_2(sc, IO_PORT_REG, data_len); /* * Output the packet data to the card. Ensure all * transfers are 16-bit wide, even if individual * mbufs have odd length. */ for (m = opkt, i = 0; m != NULL; m = m->m_next) { DODEBUG(Sent_Pkts, printf("[%d]", m->m_len);); if (i) { tmp16[1] = *(mtod(m, caddr_t)); CSR_WRITE_MULTI_2(sc, IO_PORT_REG, (uint16_t *) tmp16, 1); } CSR_WRITE_MULTI_2(sc, IO_PORT_REG, (uint16_t *) (mtod(m, caddr_t) + i), (m->m_len - i) / 2); if ((i = (m->m_len - i) & 1) != 0) { tmp16[0] = *(mtod(m, caddr_t) + m->m_len - 1); } } if (i) CSR_WRITE_MULTI_2(sc, IO_PORT_REG, (uint16_t *) tmp16, 1); /* * If there were other frames chained, update the * chain in the last one. */ if (sc->tx_head != sc->tx_tail) { if (sc->tx_tail != dest) { CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_last + XMT_Chain_Point); CSR_WRITE_2(sc, IO_PORT_REG, dest); } CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count); i = CSR_READ_2(sc, IO_PORT_REG); CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count); CSR_WRITE_2(sc, IO_PORT_REG, i | Ch_bit); } /* * Resume normal operation of the card: * - Make a dummy read to flush the DRAM write * pipeline. * - Enable receive and transmit interrupts. * - Send Transmit or Resume_XMT command, as * appropriate. */ CSR_READ_2(sc, IO_PORT_REG); #ifdef EX_PSA_INTR CSR_WRITE_1(sc, MASK_REG, All_Int & ~(Rx_Int | Tx_Int)); #endif if (sc->tx_head == sc->tx_tail) { CSR_WRITE_2(sc, XMT_BAR, dest); CSR_WRITE_1(sc, CMD_REG, Transmit_CMD); sc->tx_head = dest; DODEBUG(Sent_Pkts, printf("Transmit\n");); } else { CSR_WRITE_1(sc, CMD_REG, Resume_XMT_List_CMD); DODEBUG(Sent_Pkts, printf("Resume\n");); } sc->tx_last = dest; sc->tx_tail = next; BPF_MTAP(ifp, opkt); ifp->if_timer = 2; ifp->if_opackets++; m_freem(opkt); } else { ifp->if_flags |= IFF_OACTIVE; DODEBUG(Status, printf("OACTIVE start\n");); } } splx(s); DODEBUG(Start_End, printf("ex_start%d: finish\n", unit);); } void ex_stop(struct ex_softc *sc) { DODEBUG(Start_End, printf("ex_stop%d: start\n", unit);); /* * Disable card operation: * - Disable the interrupt line. * - Flush transmission and disable reception. * - Mask and clear all interrupts. * - Reset the 82595. */ CSR_WRITE_1(sc, CMD_REG, Bank1_Sel); CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) & ~TriST_INT); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); CSR_WRITE_1(sc, CMD_REG, Rcv_Stop); sc->tx_head = sc->tx_tail = sc->tx_lower_limit; sc->tx_last = 0; /* XXX I think these two lines are not necessary, because ex_init will always be called again to reinit the interface. */ CSR_WRITE_1(sc, MASK_REG, All_Int); CSR_WRITE_1(sc, STATUS_REG, All_Int); CSR_WRITE_1(sc, CMD_REG, Reset_CMD); DELAY(200); DODEBUG(Start_End, printf("ex_stop%d: finish\n", unit);); return; } void ex_intr(void *arg) { struct ex_softc *sc = (struct ex_softc *)arg; struct ifnet *ifp = &sc->arpcom.ac_if; int int_status, send_pkts; int loops = 100; DODEBUG(Start_End, printf("ex_intr%d: start\n", unit);); send_pkts = 0; while (loops-- > 0 && (int_status = CSR_READ_1(sc, STATUS_REG)) & (Tx_Int | Rx_Int)) { /* don't loop forever */ if (int_status == 0xff) break; if (int_status & Rx_Int) { CSR_WRITE_1(sc, STATUS_REG, Rx_Int); ex_rx_intr(sc); } else if (int_status & Tx_Int) { CSR_WRITE_1(sc, STATUS_REG, Tx_Int); ex_tx_intr(sc); send_pkts = 1; } } if (loops == 0) printf("100 loops are not enough\n"); /* * If any packet has been transmitted, and there are queued packets to * be sent, attempt to send more packets to the network card. */ if (send_pkts && (ifp->if_snd.ifq_head != NULL)) ex_start(ifp); DODEBUG(Start_End, printf("ex_intr%d: finish\n", unit);); return; } static void ex_tx_intr(struct ex_softc *sc) { struct ifnet * ifp = &sc->arpcom.ac_if; int tx_status; DODEBUG(Start_End, printf("ex_tx_intr%d: start\n", unit);); /* * - Cancel the watchdog. * For all packets transmitted since last transmit interrupt: * - Advance chain pointer to next queued packet. * - Update statistics. */ ifp->if_timer = 0; while (sc->tx_head != sc->tx_tail) { CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_head); if (! CSR_READ_2(sc, IO_PORT_REG) & Done_bit) break; tx_status = CSR_READ_2(sc, IO_PORT_REG); sc->tx_head = CSR_READ_2(sc, IO_PORT_REG); if (tx_status & TX_OK_bit) { ifp->if_opackets++; } else { ifp->if_oerrors++; } ifp->if_collisions += tx_status & No_Collisions_bits; } /* * The card should be ready to accept more packets now. */ ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE tx_intr\n");); DODEBUG(Start_End, printf("ex_tx_intr%d: finish\n", unit);); return; } static void ex_rx_intr(struct ex_softc *sc) { struct ifnet * ifp = &sc->arpcom.ac_if; int rx_status; int pkt_len; int QQQ; struct mbuf * m; struct mbuf * ipkt; struct ether_header * eh; DODEBUG(Start_End, printf("ex_rx_intr%d: start\n", unit);); /* * For all packets received since last receive interrupt: * - If packet ok, read it into a new mbuf and queue it to interface, * updating statistics. * - If packet bad, just discard it, and update statistics. * Finally, advance receive stop limit in card's memory to new location. */ CSR_WRITE_2(sc, HOST_ADDR_REG, sc->rx_head); while (CSR_READ_2(sc, IO_PORT_REG) == RCV_Done) { rx_status = CSR_READ_2(sc, IO_PORT_REG); sc->rx_head = CSR_READ_2(sc, IO_PORT_REG); QQQ = pkt_len = CSR_READ_2(sc, IO_PORT_REG); if (rx_status & RCV_OK_bit) { MGETHDR(m, M_DONTWAIT, MT_DATA); ipkt = m; if (ipkt == NULL) { ifp->if_iqdrops++; } else { ipkt->m_pkthdr.rcvif = ifp; ipkt->m_pkthdr.len = pkt_len; ipkt->m_len = MHLEN; while (pkt_len > 0) { if (pkt_len > MINCLSIZE) { MCLGET(m, M_DONTWAIT); if (m->m_flags & M_EXT) { m->m_len = MCLBYTES; } else { m_freem(ipkt); ifp->if_iqdrops++; goto rx_another; } } m->m_len = min(m->m_len, pkt_len); /* * NOTE: I'm assuming that all mbufs allocated are of even length, * except for the last one in an odd-length packet. */ CSR_READ_MULTI_2(sc, IO_PORT_REG, mtod(m, uint16_t *), m->m_len / 2); if (m->m_len & 1) { *(mtod(m, caddr_t) + m->m_len - 1) = CSR_READ_1(sc, IO_PORT_REG); } pkt_len -= m->m_len; if (pkt_len > 0) { MGET(m->m_next, M_DONTWAIT, MT_DATA); if (m->m_next == NULL) { m_freem(ipkt); ifp->if_iqdrops++; goto rx_another; } m = m->m_next; m->m_len = MLEN; } } eh = mtod(ipkt, struct ether_header *); #ifdef EXDEBUG if (debug_mask & Rcvd_Pkts) { if ((eh->ether_dhost[5] != 0xff) || (eh->ether_dhost[0] != 0xff)) { printf("Receive packet with %d data bytes: %6D -> ", QQQ, eh->ether_shost, ":"); printf("%6D\n", eh->ether_dhost, ":"); } /* QQQ */ } #endif (*ifp->if_input)(ifp, ipkt); ifp->if_ipackets++; } } else { ifp->if_ierrors++; } CSR_WRITE_2(sc, HOST_ADDR_REG, sc->rx_head); rx_another: ; } if (sc->rx_head < sc->rx_lower_limit + 2) CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_upper_limit); else CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_head - 2); DODEBUG(Start_End, printf("ex_rx_intr%d: finish\n", unit);); return; } static int ex_ioctl(register struct ifnet *ifp, u_long cmd, caddr_t data) { struct ex_softc * sc = ifp->if_softc; struct ifreq * ifr = (struct ifreq *)data; int s; int error = 0; DODEBUG(Start_End, printf("%s: ex_ioctl: start ", ifp->if_xname);); s = splimp(); switch(cmd) { case SIOCSIFADDR: case SIOCGIFADDR: case SIOCSIFMTU: error = ether_ioctl(ifp, cmd, data); break; case SIOCSIFFLAGS: DODEBUG(Start_End, printf("SIOCSIFFLAGS");); if ((ifp->if_flags & IFF_UP) == 0 && (ifp->if_flags & IFF_RUNNING)) { ifp->if_flags &= ~IFF_RUNNING; ex_stop(sc); } else { ex_init(sc); } break; #ifdef NODEF case SIOCGHWADDR: DODEBUG(Start_End, printf("SIOCGHWADDR");); bcopy((caddr_t)sc->sc_addr, (caddr_t)&ifr->ifr_data, sizeof(sc->sc_addr)); break; #endif case SIOCADDMULTI: case SIOCDELMULTI: ex_init(sc); error = 0; break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, cmd); break; default: DODEBUG(Start_End, printf("unknown");); error = EINVAL; } splx(s); DODEBUG(Start_End, printf("\n%s: ex_ioctl: finish\n", ifp->if_xname);); return(error); } static void ex_setmulti(struct ex_softc *sc) { struct ifnet *ifp; struct ifmultiaddr *maddr; uint16_t *addr; int count; int timeout, status; ifp = &sc->arpcom.ac_if; count = 0; TAILQ_FOREACH(maddr, &ifp->if_multiaddrs, ifma_link) { if (maddr->ifma_addr->sa_family != AF_LINK) continue; count++; } if ((ifp->if_flags & IFF_PROMISC) || (ifp->if_flags & IFF_ALLMULTI) || count > 63) { /* Interface is in promiscuous mode or there are too many * multicast addresses for the card to handle */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Promisc_Mode); CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); } else if ((ifp->if_flags & IFF_MULTICAST) && (count > 0)) { /* Program multicast addresses plus our MAC address * into the filter */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Multi_IA); CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); /* Borrow space from TX buffer; this should be safe * as this is only called from ex_init */ CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_lower_limit); CSR_WRITE_2(sc, IO_PORT_REG, MC_Setup_CMD); CSR_WRITE_2(sc, IO_PORT_REG, 0); CSR_WRITE_2(sc, IO_PORT_REG, 0); CSR_WRITE_2(sc, IO_PORT_REG, (count + 1) * 6); TAILQ_FOREACH(maddr, &ifp->if_multiaddrs, ifma_link) { if (maddr->ifma_addr->sa_family != AF_LINK) continue; addr = (uint16_t*)LLADDR((struct sockaddr_dl *) maddr->ifma_addr); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); } /* Program our MAC address as well */ /* XXX: Is this necessary? The Linux driver does this * but the NetBSD driver does not */ addr = (uint16_t*)(&sc->arpcom.ac_enaddr); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_WRITE_2(sc, IO_PORT_REG, *addr++); CSR_READ_2(sc, IO_PORT_REG); CSR_WRITE_2(sc, XMT_BAR, sc->tx_lower_limit); CSR_WRITE_1(sc, CMD_REG, MC_Setup_CMD); sc->tx_head = sc->tx_lower_limit; sc->tx_tail = sc->tx_head + XMT_HEADER_LEN + (count + 1) * 6; for (timeout=0; timeout<100; timeout++) { DELAY(2); if ((CSR_READ_1(sc, STATUS_REG) & Exec_Int) == 0) continue; status = CSR_READ_1(sc, CMD_REG); CSR_WRITE_1(sc, STATUS_REG, Exec_Int); break; } sc->tx_head = sc->tx_tail; } else { /* No multicast or promiscuous mode */ CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) & 0xDE); /* ~(Multi_IA | Promisc_Mode) */ CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); } } static void ex_reset(struct ex_softc *sc) { int s; DODEBUG(Start_End, printf("ex_reset%d: start\n", unit);); s = splimp(); ex_stop(sc); ex_init(sc); splx(s); DODEBUG(Start_End, printf("ex_reset%d: finish\n", unit);); return; } static void ex_watchdog(struct ifnet *ifp) { struct ex_softc * sc = ifp->if_softc; DODEBUG(Start_End, printf("%s: ex_watchdog: start\n", ifp->if_xname);); ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE watchdog\n");); ifp->if_oerrors++; ex_reset(sc); ex_start(ifp); DODEBUG(Start_End, printf("%s: ex_watchdog: finish\n", ifp->if_xname);); return; } static int ex_get_media(struct ex_softc *sc) { int current; int media; media = ex_eeprom_read(sc, EE_W5); CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); current = CSR_READ_1(sc, REG3); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); if ((current & TPE_bit) && (media & EE_W5_PORT_TPE)) return(IFM_ETHER|IFM_10_T); if ((current & BNC_bit) && (media & EE_W5_PORT_BNC)) return(IFM_ETHER|IFM_10_2); if (media & EE_W5_PORT_AUI) return (IFM_ETHER|IFM_10_5); return (IFM_ETHER|IFM_AUTO); } static int ex_ifmedia_upd(ifp) struct ifnet * ifp; { struct ex_softc * sc = ifp->if_softc; if (IFM_TYPE(sc->ifmedia.ifm_media) != IFM_ETHER) return EINVAL; return (0); } static void ex_ifmedia_sts(ifp, ifmr) struct ifnet * ifp; struct ifmediareq * ifmr; { struct ex_softc * sc = ifp->if_softc; ifmr->ifm_active = ex_get_media(sc); ifmr->ifm_status = IFM_AVALID | IFM_ACTIVE; return; } u_short ex_eeprom_read(struct ex_softc *sc, int location) { int i; u_short data = 0; int read_cmd = location | EE_READ_CMD; short ctrl_val = EECS; CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); CSR_WRITE_1(sc, EEPROM_REG, EECS); for (i = 8; i >= 0; i--) { short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI : ctrl_val; CSR_WRITE_1(sc, EEPROM_REG, outval); CSR_WRITE_1(sc, EEPROM_REG, outval | EESK); DELAY(3); CSR_WRITE_1(sc, EEPROM_REG, outval); DELAY(2); } CSR_WRITE_1(sc, EEPROM_REG, ctrl_val); for (i = 16; i > 0; i--) { CSR_WRITE_1(sc, EEPROM_REG, ctrl_val | EESK); DELAY(3); data = (data << 1) | ((CSR_READ_1(sc, EEPROM_REG) & EEDO) ? 1 : 0); CSR_WRITE_1(sc, EEPROM_REG, ctrl_val); DELAY(2); } ctrl_val &= ~EECS; CSR_WRITE_1(sc, EEPROM_REG, ctrl_val | EESK); DELAY(3); CSR_WRITE_1(sc, EEPROM_REG, ctrl_val); DELAY(2); CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); return(data); }