/*- * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /** * @file * * @brief This file contains the method implementations required to * translate the SCSI inquiry command. * The following (VPD) pages are currently supported: * - Standard * - Supported Pages * - Unit Serial Number * - Device Identification */ #if !defined(DISABLE_SATI_INQUIRY) #include #include #include #include #include //****************************************************************************** //* P R I V A T E M E T H O D S //****************************************************************************** /** * @brief This method builds the SCSI data associated with the SATI product * revision that is commonly used on the Standard inquiry response and * the ATA information page. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[in] ata_input_data This parameter specifies ata data received from * the remote device. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the standard inquiry data. * * @return none */ static void sati_inquiry_construct_product_revision( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; // Fill in the product revision level field. // Per SAT, copy portions of the firmware revision that is not filled // with spaces. Some devices left-align their firmware rev ID, while // others right-align. if ( (identify->firmware_revision[4] == 0x20) && (identify->firmware_revision[5] == 0x20) && (identify->firmware_revision[6] == 0x20) && (identify->firmware_revision[7] == 0x20) ) { sati_ata_identify_device_copy_data( sequence, scsi_io, 32, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(firmware_revision), 4, TRUE ); } else { // Since the last 4 bytes of the firmware revision are not spaces, // utilize these bytes as the firmware revision in the inquiry data. sati_ata_identify_device_copy_data( sequence, scsi_io, 32, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(firmware_revision)+4, 4, TRUE ); } } //****************************************************************************** //* P U B L I C M E T H O D S //****************************************************************************** /** * @brief This method builds the SCSI data associated with a SCSI standard * inquiry request. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[in] ata_input_data This parameter specifies ata data received from * the remote device. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the standard inquiry data. * * @return none */ void sati_inquiry_standard_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U32 index; // Device type is disk, attached to this lun. sati_set_data_byte(sequence, scsi_io, 0, 0x00); // If the device indicates it's a removable media device, then set the // RMB bit if (identify->general_config_bits & ATA_IDENTIFY_REMOVABLE_MEDIA_ENABLE) sati_set_data_byte(sequence, scsi_io, 1, 0x80); else sati_set_data_byte(sequence, scsi_io, 1, 0x00); sati_set_data_byte(sequence, scsi_io, 2, 0x05); // Indicate SPC-3 support sati_set_data_byte(sequence, scsi_io, 3, 0x02); // Response Format SPC-3 sati_set_data_byte(sequence, scsi_io, 4, 62); // 62 Additional Data Bytes. // n-4 per the spec, we end at // byte 66, so 66-4. sati_set_data_byte(sequence, scsi_io, 5, 0x00); sati_set_data_byte(sequence, scsi_io, 6, 0x00); sati_set_data_byte(sequence, scsi_io, 7, 0x02); // Enable Cmd Queueing // The Vender identification field is set to "ATA " sati_set_data_byte(sequence, scsi_io, 8, 0x41); sati_set_data_byte(sequence, scsi_io, 9, 0x54); sati_set_data_byte(sequence, scsi_io, 10, 0x41); sati_set_data_byte(sequence, scsi_io, 11, 0x20); sati_set_data_byte(sequence, scsi_io, 12, 0x20); sati_set_data_byte(sequence, scsi_io, 13, 0x20); sati_set_data_byte(sequence, scsi_io, 14, 0x20); sati_set_data_byte(sequence, scsi_io, 15, 0x20); // Fill in the product ID field. sati_ata_identify_device_copy_data( sequence, scsi_io, 16, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(model_number), 16, TRUE ); sati_inquiry_construct_product_revision( sequence, ata_input_data, scsi_io ); // Set the remaining fields up to the version descriptors to 0. for (index = 36; index < 58; index++) sati_set_data_byte(sequence, scsi_io, index, 0); // Add version descriptors for the various protocols in play. // SAM-4 sati_set_data_byte(sequence, scsi_io, 58, 0); sati_set_data_byte(sequence, scsi_io, 59, 0x80); // SAS-2 sati_set_data_byte(sequence, scsi_io, 60, 0x0C); sati_set_data_byte(sequence, scsi_io, 61, 0x20); // SPC-4 sati_set_data_byte(sequence, scsi_io, 62, 0x04); sati_set_data_byte(sequence, scsi_io, 63, 0x60); // SBC-3 sati_set_data_byte(sequence, scsi_io, 64, 0x04); sati_set_data_byte(sequence, scsi_io, 65, 0xC0); // ATA/ATAPI-8 ACS sati_set_data_byte(sequence, scsi_io, 66, 0x16); sati_set_data_byte(sequence, scsi_io, 67, 0x23); } /** * @brief This method builds the SCSI data associated with an SCSI inquiry * for the supported VPD pages page. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the supported VPD page information. * * @return none */ static void sati_inquiry_supported_pages_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io ) { // Formulate the SCSI output data for the caller. sati_set_data_byte(sequence, scsi_io, 0, 0); // Qualifier and Device Type sati_set_data_byte(sequence, scsi_io, 1, SCSI_INQUIRY_SUPPORTED_PAGES_PAGE); sati_set_data_byte(sequence, scsi_io, 2, 0); // Reserved. sati_set_data_byte(sequence, scsi_io, 3, 4); // # VPD pages supported sati_set_data_byte(sequence, scsi_io, 4, SCSI_INQUIRY_SUPPORTED_PAGES_PAGE); sati_set_data_byte(sequence, scsi_io, 5, SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE); sati_set_data_byte(sequence, scsi_io, 6, SCSI_INQUIRY_DEVICE_ID_PAGE); sati_set_data_byte(sequence, scsi_io, 7, SCSI_INQUIRY_ATA_INFORMATION_PAGE); sati_set_data_byte(sequence, scsi_io, 8, SCSI_INQUIRY_BLOCK_DEVICE_PAGE); sati_set_data_byte(sequence, scsi_io, 9, 0); // End of the list } /** * @brief This method builds the SCSI data associated with a request for * the unit serial number vital product data (VPD) page. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[in] ata_input_data This parameter specifies ata data received from * the remote device. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the unit serial number data. * * @return none */ void sati_inquiry_serial_number_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { // Peripheral qualifier (0x0, currently connected) // Peripheral device type (0x0 direct-access block device) sati_set_data_byte(sequence, scsi_io, 0, 0x00); sati_set_data_byte(sequence, scsi_io, 1, SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE); sati_set_data_byte(sequence, scsi_io, 2, 0x00); // Reserved sati_set_data_byte(sequence, scsi_io, 3, ATA_IDENTIFY_SERIAL_NUMBER_LEN); sati_ata_identify_device_copy_data( sequence, scsi_io, 4, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(serial_number), ATA_IDENTIFY_SERIAL_NUMBER_LEN, TRUE ); } /** * @brief This method builds the SCSI data associated with a request for * the Block Device Characteristics vital product data (VPD) page. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[in] ata_input_data This parameter specifies ata data received from * the remote device. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the unit serial number data. * * @return none */ void sati_inquiry_block_device_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U32 offset; // Peripheral qualifier (0x0, currently connected) // Peripheral device type (0x0 direct-access block device) sati_set_data_byte(sequence, scsi_io, 0, 0x00); sati_set_data_byte(sequence, scsi_io, 1, SCSI_INQUIRY_BLOCK_DEVICE_PAGE); //PAGE LENGTH 0x003C sati_set_data_byte(sequence, scsi_io, 2, 0x00); sati_set_data_byte(sequence, scsi_io, 3, SCSI_INQUIRY_BLOCK_DEVICE_LENGTH); sati_ata_identify_device_copy_data( sequence, scsi_io, 4, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(nominal_media_rotation_rate), 2, FALSE ); sati_set_data_byte(sequence, scsi_io, 6, 0x00); sati_set_data_byte( sequence, scsi_io, 7, (identify->device_nominal_form_factor & 0x0F) // only need bits 0-3 ); //bytes 8-63 are reserved for(offset = 8; offset < 63; offset++) { sati_set_data_byte(sequence, scsi_io, offset, 0x00); } } /** * @brief This method builds the SCSI data associated with a request for * the device identification vital product data (VPD) page. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[in] ata_input_data This parameter specifies ata data received from * the remote device. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the device ID page. * * @return none */ void sati_inquiry_device_id_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) ata_input_data; U16 byte_offset = 4; U16 page_length; // Peripheral qualifier (0x0, currently connected) // Peripheral device type (0x0 direct-access block device) sati_set_data_byte(sequence, scsi_io, 0, 0x00); sati_set_data_byte(sequence, scsi_io, 1, SCSI_INQUIRY_DEVICE_ID_PAGE); /** * If World Wide Names are supported by this target, then build an * identification descriptor using the WWN. */ if (identify->command_set_supported_extention & ATA_IDENTIFY_COMMAND_SET_WWN_SUPPORT_ENABLE) { sati_set_data_byte(sequence, scsi_io, 4, SCSI_FC_PROTOCOL_IDENTIFIER | SCSI_BINARY_CODE_SET ); sati_set_data_byte(sequence, scsi_io, 5, SCSI_LUN_ASSOCIATION | SCSI_NAA_IDENTIFIER_TYPE ); sati_set_data_byte(sequence, scsi_io, 6, 0); sati_set_data_byte(sequence, scsi_io, 7, 0x08); // WWN are 8 bytes long // Copy data from the identify device world wide name field into the // buffer. sati_ata_identify_device_copy_data( sequence, scsi_io, 8, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(world_wide_name), ATA_IDENTIFY_WWN_LEN, FALSE ); byte_offset = 16; } /** * Build a identification descriptor using the model number & serial number. */ sati_set_data_byte(sequence, scsi_io, byte_offset, SCSI_FC_PROTOCOL_IDENTIFIER | SCSI_ASCII_CODE_SET ); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, SCSI_LUN_ASSOCIATION | SCSI_T10_IDENTIFIER_TYPE ); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0); byte_offset++; // Identifier length (8 bytes for "ATA " + 40 bytes from ATA IDENTIFY // model number field + 20 bytes from ATA IDENTIFY serial number field. sati_set_data_byte( sequence, scsi_io, byte_offset, 8 + (ATA_IDENTIFY_SERIAL_NUMBER_LEN) + (ATA_IDENTIFY_MODEL_NUMBER_LEN) ); byte_offset++; // Per SAT, write "ATA ". sati_set_data_byte(sequence, scsi_io, byte_offset, 0x41); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0x54); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0x41); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0x20); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0x20); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0x20); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0x20); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0x20); byte_offset++; // Copy data from the identify device model number field into the // buffer and update the byte_offset. sati_ata_identify_device_copy_data( sequence, scsi_io, byte_offset, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(model_number), ATA_IDENTIFY_MODEL_NUMBER_LEN, TRUE ); byte_offset += ATA_IDENTIFY_MODEL_NUMBER_LEN; // Copy data from the identify device serial number field into the // buffer and update the byte_offset. sati_ata_identify_device_copy_data( sequence, scsi_io, byte_offset, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(serial_number), ATA_IDENTIFY_SERIAL_NUMBER_LEN, TRUE ); byte_offset += ATA_IDENTIFY_SERIAL_NUMBER_LEN; /** * If the target is contained in a SAS Domain, then build a target port * ID descriptor using the SAS address. */ #if defined(SATI_TRANSPORT_SUPPORTS_SAS) \ && defined(DISABLE_MSFT_SCSI_COMPLIANCE_SUPPORT) { SCI_SAS_ADDRESS_T sas_address; sati_set_data_byte( sequence, scsi_io, byte_offset, SCSI_SAS_PROTOCOL_IDENTIFIER | SCSI_BINARY_CODE_SET ); byte_offset++; sati_set_data_byte( sequence, scsi_io, byte_offset, SCSI_PIV_ENABLE | SCSI_TARGET_PORT_ASSOCIATION | SCSI_NAA_IDENTIFIER_TYPE ); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 0); byte_offset++; sati_set_data_byte(sequence, scsi_io, byte_offset, 8); // SAS Addr=8 bytes byte_offset++; sati_cb_device_get_sas_address(scsi_io, &sas_address); // Store the SAS address in the target port descriptor. sati_set_data_dword(sequence, scsi_io, byte_offset, sas_address.high); byte_offset += 4; sati_set_data_dword(sequence, scsi_io, byte_offset, sas_address.low); byte_offset += 4; } #endif // SATI_TRANSPORT_SUPPORTS_SAS && DISABLE_MSFT_SCSI_COMPLIANCE_SUPPORT /** * Set the Page length field. The page length is n-3, where n is the * last offset in the page (considered page length - 4). */ page_length = byte_offset - 4; sati_set_data_byte(sequence, scsi_io, 2, (U8)((page_length & 0xFF00) >> 8)); sati_set_data_byte(sequence, scsi_io, 3, (U8)(page_length & 0x00FF)); } /** * @brief This method builds the SCSI data associated with a request for * the ATA information vital product data (VPD) page. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[in] ata_input_data This parameter specifies ata data received from * a identify device command processed by the remote device. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the ATA information page. * * @return none */ SATI_STATUS sati_inquiry_ata_information_translate_data( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * ata_input_data, void * scsi_io ) { sati_set_data_byte(sequence, scsi_io, 0, 0x00); sati_set_data_byte(sequence, scsi_io, 1, SCSI_INQUIRY_ATA_INFORMATION_PAGE); sati_set_data_byte(sequence, scsi_io, 2, 0x02); sati_set_data_byte(sequence, scsi_io, 3, 0x38); //Reserved SAT2r07 sati_set_data_byte(sequence, scsi_io, 4, 0x00); sati_set_data_byte(sequence, scsi_io, 5, 0x00); sati_set_data_byte(sequence, scsi_io, 6, 0x00); sati_set_data_byte(sequence, scsi_io, 7, 0x00); // The Vender identification field is set to "ATA " sati_set_data_byte(sequence, scsi_io, 8, 0x41); sati_set_data_byte(sequence, scsi_io, 9, 0x54); sati_set_data_byte(sequence, scsi_io, 10, 0x41); sati_set_data_byte(sequence, scsi_io, 11, 0x20); sati_set_data_byte(sequence, scsi_io, 12, 0x20); sati_set_data_byte(sequence, scsi_io, 13, 0x20); sati_set_data_byte(sequence, scsi_io, 14, 0x20); sati_set_data_byte(sequence, scsi_io, 15, 0x20); //SAT Product identification sati_ata_identify_device_copy_data( sequence, scsi_io, 16, ata_input_data, ATA_IDENTIFY_DEVICE_GET_OFFSET(model_number), 16, TRUE ); //SAT Product Revision level bytes 32-35 sati_inquiry_construct_product_revision( sequence, ata_input_data, scsi_io ); //skipping ATA device signature for now //Command code sati_set_data_byte(sequence, scsi_io, 56, 0xEC); //Reserved SAT2r07 sati_set_data_byte(sequence, scsi_io, 57, 0x00); sati_set_data_byte(sequence, scsi_io, 58, 0x00); sati_set_data_byte(sequence, scsi_io, 59, 0x00); //copy all ATA identify device data sati_ata_identify_device_copy_data( sequence, scsi_io, 60, ata_input_data, 0, sizeof(ATA_IDENTIFY_DEVICE_DATA_T), FALSE ); //Need to send ATA Execute Device Diagnostic command still sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE; return SATI_SEQUENCE_INCOMPLETE; } /** * @brief This method will translate the inquiry SCSI command into * an ATA IDENTIFY DEVICE command. It will handle several different * VPD pages and the standard inquiry page. * For more information on the parameters passed to this method, * please reference sati_translate_command(). * * @return Indicate if the command translation succeeded. * @retval SCI_SUCCESS This is returned if the command translation was * successful. * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if * the page isn't supported, or the page code * field is not zero when the EVPD bit is 0. */ SATI_STATUS sati_inquiry_translate_command( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io ) { U8 * cdb = sati_cb_get_cdb_address(scsi_io); /** * SPC dictates: * - that the page code field must be 0, if VPD enable is 0. */ if ( ((sati_get_cdb_byte(cdb, 1) & SCSI_INQUIRY_EVPD_ENABLE) == 0) && (sati_get_cdb_byte(cdb, 2) != 0) ) { sati_scsi_sense_data_construct( sequence, scsi_io, SCSI_STATUS_CHECK_CONDITION, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INVALID_FIELD_IN_CDB, SCSI_ASCQ_INVALID_FIELD_IN_CDB ); return SATI_FAILURE_CHECK_RESPONSE_DATA; } // Set the data length based on the allocation length field in the CDB. sequence->allocation_length = (sati_get_cdb_byte(cdb, 3) << 8) | (sati_get_cdb_byte(cdb, 4)); // Check to see if there was a request for the vital product data or just // the standard inquiry. if (sati_get_cdb_byte(cdb, 1) & SCSI_INQUIRY_EVPD_ENABLE) { // Parse the page code to determine which translator to invoke. switch (sati_get_cdb_byte(cdb, 2)) { case SCSI_INQUIRY_SUPPORTED_PAGES_PAGE: sequence->type = SATI_SEQUENCE_INQUIRY_SUPPORTED_PAGES; sati_inquiry_supported_pages_translate_data(sequence, scsi_io); return SATI_COMPLETE; break; case SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE: sequence->type = SATI_SEQUENCE_INQUIRY_SERIAL_NUMBER; break; case SCSI_INQUIRY_DEVICE_ID_PAGE: sequence->type = SATI_SEQUENCE_INQUIRY_DEVICE_ID; break; case SCSI_INQUIRY_ATA_INFORMATION_PAGE: if(sequence->state == SATI_SEQUENCE_STATE_INCOMPLETE) { sati_ata_execute_device_diagnostic_construct( ata_io, sequence ); sequence->type = SATI_SEQUENCE_INQUIRY_EXECUTE_DEVICE_DIAG; } else { sequence->type = SATI_SEQUENCE_INQUIRY_ATA_INFORMATION; } break; case SCSI_INQUIRY_BLOCK_DEVICE_PAGE: sequence->type = SATI_SEQUENCE_INQUIRY_BLOCK_DEVICE; break; default: sati_scsi_sense_data_construct( sequence, scsi_io, SCSI_STATUS_CHECK_CONDITION, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INVALID_FIELD_IN_CDB, SCSI_ASCQ_INVALID_FIELD_IN_CDB ); return SATI_FAILURE_CHECK_RESPONSE_DATA; break; } } else { sequence->type = SATI_SEQUENCE_INQUIRY_STANDARD; } sati_ata_identify_device_construct(ata_io, sequence); return SATI_SUCCESS; } /** * @brief This method finishes the construction of the SCSI data associated with a request for the ATA information vital product data (VPD) page. The ATA device signature is written into the data response from the task fle registers after issuing a Execute Device Diagnostic command. * * @param[in] sequence This parameter specifies the translator sequence * object to be utilized during data translation. * @param[out] scsi_io This parameter specifies the user IO request for * which to construct the ATA information page. * @param[in] ata_io This parameter specifies the ATA payload * buffer location and size to be translated. * * @return none */ void sati_inquiry_ata_information_finish_translation( SATI_TRANSLATOR_SEQUENCE_T * sequence, void * scsi_io, void * ata_io ) { U8 * register_fis = sati_cb_get_d2h_register_fis_address(ata_io); U32 offset; //SATA transport sati_set_data_byte(sequence, scsi_io, 36, 0x34); sati_set_data_byte(sequence, scsi_io, 37, 0x00); sati_set_data_byte(sequence, scsi_io, 38, (U8) sati_get_ata_status(register_fis)); sati_set_data_byte(sequence, scsi_io, 39, (U8) sati_get_ata_error(register_fis)); sati_set_data_byte(sequence, scsi_io, 40, sati_get_ata_lba_low(register_fis)); sati_set_data_byte(sequence, scsi_io, 41, sati_get_ata_lba_mid(register_fis)); sati_set_data_byte(sequence, scsi_io, 42, sati_get_ata_lba_high(register_fis)); sati_set_data_byte(sequence, scsi_io, 43, sati_get_ata_device(register_fis)); sati_set_data_byte(sequence, scsi_io, 44, sati_get_ata_lba_low_ext(register_fis)); sati_set_data_byte(sequence, scsi_io, 45, sati_get_ata_lba_mid_ext(register_fis)); sati_set_data_byte(sequence, scsi_io, 46, sati_get_ata_lba_high_ext(register_fis)); sati_set_data_byte(sequence, scsi_io, 47, 0x00); sati_set_data_byte(sequence, scsi_io, 48, sati_get_ata_sector_count(register_fis)); sati_set_data_byte(sequence, scsi_io, 49, sati_get_ata_sector_count_exp(register_fis)); for(offset = 50; offset < 56; offset++) { sati_set_data_byte(sequence, scsi_io, offset, 0x00); } sequence->state = SATI_SEQUENCE_STATE_FINAL; } #endif // !defined(DISABLE_SATI_INQUIRY)