.\"
.\" Copyright (c) 1997, 1999 Hellmuth Michaelis. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$ 
.\"
.\"     last edit-date: [Wed Jul 28 15:57:02 1999]
.\"
.Dd May 20, 1999
.Dt ISDND.RC 5
.Os
.Sh NAME
.Nm isdnd.rc
.Nd isdn4bsd ISDN connection management daemon config file format
.Sh DESCRIPTION
The file
.Pa /etc/isdn/isdnd.rc
contains (if not otherwise specified on the command line) the runtime
configuration for the 
.Xr isdnd 8
ISDN connection management daemon which is part of the isdn4bsd package.
.Pp
The configuration file consists of keywords which start in column 1 followed by
one or more spaces or tabs, an equal sign, one or more spaces or tabs
and a keyword dependent parameter value.
.Pp
A line beginning with '#' is treated as a comment line.
.Pp
For keywords requiring the specification of a boolean value, the truth
value can be either
.Em yes
or
.Em on
while the false value can be either
.Em no
or
.Em off .
.Pp
The configuration file consists of one
.Em system
section and one or more
.Em entry
sections.
In the
.Em system
section parameters regarding the daemon operation or parameters 
not associated with a single remote connection can be set.
In the
.Em entry
section(s) parameters directly associated with a single remote
connection can be set.
.Pp
The following keywords are recognized by
.Nm isdnd :
.Pp
.Bl -tag -width system -compact

.It Li system
This keyword starts the system configuration section. It must not 
have a parameter and may be used only once. The keyword is mandatory.
The following keywords are valid in the system configuration section:
.Bl -tag -width useacctfile -compact

.It Li acctall
If this parameter is set to
.Em on ,
accounting information is written even if the local site was not charged
or no charging information is available or is not subscribed. (optional)

.It Li acctfile
Specifies the name of the accounting file which is used when the keyword
.Em useacctfile
(see below) is set to 
.Em on .
See also system keyword
.Em rotatesuffix .
If this keyword is omitted the system default is used. (optional)

.It Li aliasing
If this parameter is set to
.Em on ,
alias processing of telephone-number to name is enabled (see also the
.Em aliasfile
keyword below). The default is off. (optional)

.It Li aliasfile
Specifies the name of the telephone number-to-name alias database file shared
with the 
.Xr isdntel 1
utility when alias processing is enabled via the
.Em aliasing
keyword. (optional)

.It Li beepconnect
In fullscreen mode, if this parameter is set to
.Em on ,
ring the bell when connecting or disconnecting a call.

.It Li isdntime
If this parameter is set to
.Em on ,
date/time information from the exchange (if provided) is written to the
logfile. The default is off. (optional)

.It Li monitor-allowed
If this parameter is set to
.Em on 
or 
.Em yes ,
monitoring via a local or remote machine is enabled.
This parameter is optional and is set to
.Em off
by default.

.It Li monitor-port
sets the TCP port number for remote monitoring.
This integer parameter is optional and is set to port 451 by default.

.It Li monitor
This keyword specifies a local socket name or a host or network for remote
monitoring. The 
.Em monitor 
specification may either be:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar the name of a local (UNIX-domain) socket
this MUST start with a "/", example: /var/run/isdn-monitor
.It Ar a dotted-quad host specification
example: 192.168.1.2
.It Ar a dotted-quad network address with netmask
example: 192.168.1.0/24
.It Ar a resolvable host name
example: localhost
.It Ar a resolvable network name with netmask
example: up-vision-net/24
.El

.It Li monitor-access
This keyword specifies the access rights for a previously used 
.Em monitor
keyword. The supported access rights are:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar fullcmd
.It Ar restrictedcmd
.It Ar channelstate
.It Ar logevents
.It Ar callin
.It Ar callout
.El

.It Li ratesfile
Specifies the name of the ratesfile. If this keyword is omitted the system
default is used. (optional)

.It Li regexpr
This keyword is used to specify regular expressions. It can be specified
more than once up to a compile time dependent value (currently set to 5 by
the MAX_RE definition in the source).
.Pp
All specified regular expressions are compared to the log strings at runtime
and if a match is found, a program is run with the log text as a parameter
(see also the keyword
.Em regprog
below).
.Pp
For an explanation how regular expressions are specified, please have a
look at
.Xr re_format 7
and
.Xr regex 3 .
The
.Em extended
regular expression syntax is supported here.
.Pp
Hint: it might be necessary to properly quote the expression to avoid
improper interpretation by the configuration file parser.
(optional)

.It Li regprog
This keyword is used to specify the name of a program which is run in
case a corresponding regular expression is matched by a logging string.
.Nm Isdnd
expects to find the program below the path
.Pa /etc/isdn
which is prepended to the string specified as a parameter to this keyword.
(optional)

.It Li rotatesuffix
Specifies a suffix for renaming the log- and the accountingfilename. In case
rotatesuffix is used and a USR1 signal is sent to isdnd, the logfile and the
accounting file is not only closed and reopened but the old logfile is also
renamed to the former filename with the rotatesuffix string appended.
If this keyword is omitted, the logfiles are just closed and reopened; this
is also the default behaviour. (optional)

.It Li rtprio
Specifies the realtime priority 
.Nm isdnd
runs at as an integer value in the range 0...31 with 0 being the highest
priority. This keyword is optional; if not specified the process priority of 
.Nm isdnd
is not touched in any way.
( See also
.Xr rtprio 1 
).
This keyword is only available if
.Nm
was compiled with -DUSE_RTPRIO.

.It Li useacctfile
If this parameter is set to
.Em on
charging (if available) and accounting information is written to the
accounting file. (optional)

.El

.It Li entry
This keyword starts one configuration entry. It must not have a parameter.
This keyword must be used at least once.
The following keywords are valid in an entry section:
.Bl -tag -width unitlengthsrc -compact

.It Li answerprog
This keyword is used to specify the name of a program which is run in
case an incoming telephone connection specified
.Em answer
in its configuration entry. The default name is
.Em answer .
.Nm Isdnd
expects to find this program beneath the path
.Pa /etc/isdn
which is prepended to the string specified as a parameter to this keyword.
(optional)

.It Li alert
is used to specify a time in seconds to wait before accepting a call. This
keyword is only usable for incoming telephone calls (dialin-reaction = answer).
It is used to have a chance to accept an incoming call on the phone before
the answering machine starts to run. The minimum value for the alert parameter
is 5 seconds and the maximum parameter allowed is 180 seconds.
(optional)

.It Li b1protocol
The B channel layer 1 protocol used for this connection. The keyword is mandatory.
The currently configurable values are:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar hdlc
HDLC framing.
.It Ar raw
No framing at all (used for telephony).
.El

.It Li callbackwait
The time in seconds to wait between hanging up the call from a remote site
and calling back the remote site. (optional)

.It Li calledbackwait
The time in seconds to wait for a remote site calling back the local site
after a call from the local site to the remote site has been made. (optional)

.It Li dialin-reaction
Used to specify what to do when an incoming connection request is received.
The keyword is mandatory.
The currently supported parameters are:
.Pp
.Bl -tag -width calledback -compact -offset
.It Ar accept
Accept an incoming call.
.It Ar reject
Reject an incoming call.
.It Ar ignore
Ignore an incoming call.
.It Ar answer
Start telephone answering for an incoming voice call.
.It Ar callback
When a remote site calls, hangup and call back the remote site.
.El

.It Li dialout-type
This keyword is used to configure what type of dialout mode is used.
The keyword is mandatory.
The currently supported parameters are:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar normal
Normal behavior, call the remote site which is supposed to accept the call.
.It Ar calledback
Callback behavior, call the remote side which rejects the call and calls
us back.
.El

.It Li dialrandincr
When dialing or re-dialing and this parameter is set to
.Em on ,
the dial retry time is added with a random value (currently 0...3 seconds)
to minimize the chance of two sites dialing synchronously so each gets a busy
each time it dials because the other side is also dialing.

.It Li dialretries
The number of dialing retries before giving up. (optional)

.It Li direction
This keyword is used to configure if incoming and outgoing, incoming-only or
outgoing only connections are possible.
The keyword is optional, the default is
.Em inout .

.Pp
The currently supported parameters are:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar inout
Normal behavior, connection establishment is possible from remote and local.
.It Ar in
Only incoming connections are possible.
.It Ar out
Only outgoing connections are possible.
.El

.It Li downtries
is used to configure the number of unsuccessful tries (= retry cycles!) before
the interface is disabled (for
.Em downtime
seconds).
(see also the keyword
.Em usedown
further up). This keyword is optional.

.It Li downtime
is used to configure the time in seconds an interface is disabled 
after the configured number of 
.Em downtries .
(see also the keyword
.Em usedown
further up).
This keyword is optional and is set to 60 seconds by default.

.It Li earlyhangup
A (safety) time in seconds which specifies the time to hangup before an
expected next charging unit will occur. (optional)

.It Li idle-algorithm-outgoing
The algorithm used to determine when to hang up an outgoing call when the
line becomes idle. The current algorithms are:

.Pp
.Bl -tag -width calledback -compact -offset
.It Ar fix-unit-size
idle algorithm which assumes fixed sized changing units during the whole call.
.It Ar var-unit-size
idle algorithm which assumes that the charging is time based after the first
units time has expired.
.El

.It Li idletime-outgoing
The time in seconds an outgoing connection must be idle before hanging up.
An idle timeout of zero disables this functionality.
(optional)

.It Li idletime-incoming
The time in seconds an incoming connection must be idle before hanging up.
An idle timeout of zero disables this functionality.
(optional)

.It Li isdncontroller
The ISDN controller number to be used for connections for this entry.
(mandatory)

.It Li isdnchannel
The ISDN controller channel number to be used for connections for this entry.
In case a channel is explicitly selected here, the SETUP message will request
this channel but mark the request as
.Em preferred
(the indicated channel is preferred) instead of exclusive (only the indicated
channel is acceptable). Thus the exchange is still free to select another 
than the requested channel!
(mandatory)

.It Li isdntxdel-incoming
A delay value suitable for the
.Em timeout()
kernel subroutine to delay the transmittion of the first packet after a
successfull connection is made by this value for 
.Em incoming
ISDN connections. The specification unit is 1/100 second. A zero (0) disables
this feature and is the default value. This feature is implemented (and makes 
sense only) for the
.Xr i4bipr 4
IP over raw HDLC ISDN driver. (optional)

.It Li isdntxdel-outgoing
A delay value suitable for the
.Em timeout()
kernel subroutine to delay the transmittion of the first packet after a
successfull connection is made by this value for 
.Em outgoing
ISDN connections. The specification unit is 1/100 second. A zero (0) disables   
this feature and is the default value. This feature is implemented (and makes
sense only) for the
.Xr i4bipr 4
IP over raw HDLC ISDN driver. (optional)

.It Li local-phone-dialout
The local telephone number used when the local site dials out. When dialing
out to a remote site, the number specified here is put into the
.Em "Calling Party Number Information Element" .
.Pp
This keyword is mandatory for the 
.Em ipr 
userland interfaces.

.It Li local-phone-incoming
The local telephone number used for verifying the destination of incoming
calls. When a remote site dials in, this number is used to verify that it 
is the local site which the remote site wants to connect to. It is compared
with the
.Em "Called Party Number Information Element"
got from the telephone exchange.
.Pp
This keyword is mandatory for the ipr interfaces.

.It Li name
Defines a symbolic name for this configuration entry. It's purpose is to
use this name in the full-screen display for easy identification of a link
to a remote site and for accounting purposes. (mandatory)

.It Li ratetype
The rate entry used from the rates file. (optional)
.br
For example, ratetype=0 selects lines beginning "ra0" in /etc/isdn/isdnd.rates;
(typically ra0 lines are a set of tables for local call rates on different
days of the week & times per day).

.It Li recoverytime
The time in seconds to wait between dial retries. (optional)

.It Li remdial-handling
is used to specify the dialout behavior in case more than one outgoing 
number is specified.
The currently supported parameters are:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar first
For every new (non-retry) call setup, start with the first number.
.It Ar last
For every new (non-retry) call setup, start with the last number with
which a successful connection was made.
.It Ar next
For every new (non-retry) call setup, start with the next number which
follows the last one used.
.El

.It Li remote-phone-dialout
The remote telephone number used when the local site dials out. When dialing
out to a remote site, the number specified here is put into the
.Em "Called Party Number Information Element" .
.Pp
This keyword is mandatory for the
.Em ipr
interfaces. It may be specified more than once to try to dial to several
numbers until one succeeds.

.It Li remote-phone-incoming
The remote telephone number used to verify an incoming call. When a remote site
dials in, this number is used to verify that it is the correct remote site
which is herewith authorized to connect into the local system. This parameter
is compared against the 
.Em "Calling Party Number Information Element"
got from the telephone exchange.
.Pp
This keyword is mandatory for the ipr interfaces.
.Pp
This keyword may have a wildcard parameter '*' to permit anyone dialing in.

.It Li unitlength
The length of a charging unit in seconds. This is used in conjunction with
the idletime to decide when to hangup a connection. (optional)

.It Li unitlengthsrc
This keyword is used to specify from which source
.Xr isdnd 8
takes the unitlength for shorthold mode. The currently configurable values are:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar none
Then unitlength is not specified anywhere. 
.It Ar cmdl
Use the unitlength specified on the commandline.
.It Ar conf
Use the unitlength specified in the configuration file with the keyword
.Em unitlength .
.It Ar rate
Use the unitlength from the ratesfile specified in the configuration
file with the keyword
.Em ratetype .
.It Ar aocd
Use a dynamically calculated unitlength in case AOCD is subscribed on
the ISDN line. (AOCD is an acronym for ``Advice Of Charge During the call''
which is a service provided by the telecommunications (ie phone) provider,
to indicate billable units).
.El

.It Li usrdevicename
Specifies the userland interface which is used for interfacing ISDN B channel
data to the userland. The keyword is mandatory.
This keyword accepts the following parameters:
.Pp
.Bl -tag -width Ds -compact -offset
.It Ar ipr
This parameter configures a raw HDLC IP over ISDN interface.
.It Ar isp
This parameter configures a synchronous PPP over ISDN interface.
.It Ar rbch
This specifies a Raw B CHannel access interface.
.It Ar tel
ISDN telephony.
.El

.It Li usrdeviceunit
Specifies the unit number for the device which is specified with
usrdevicename.

.It Li usedown
is used to enable the use of the keywords
.Em downtries
and
.Em downtime
in the entries section(s). It is used in the
.Nm isdnd
daemon to dynamically enable and disable the IP interfaces to avoid excessive
dialing activities in case of transient failures (such as busy lines).
This parameter is optional and is set to
.Em off
by default.

.It Li connectprog
specifies a program run everytime after a connection is established and
address negotiation is complete (i.e.: the connection is useable).
.Nm Isdnd
expects to find the program below the path
.Pa /etc/isdn
which is prepended to the string specified as a parameter to this keyword.
The programs specified by connect and disconnect will get the following
command line arguments: -d (device) -f (flag) [ -a (addr) ] where 
.Em device
is the name of device, e.g. "isp0", 
.Em flag
will be "up" if connection just got up, or "down" if interface changed to down 
state and
.Em addr
the address that got assigned to the interface as a dotted-quad ip address
(optional, only if it can be figured out by isdnd). (optional)

.It Li disconnectprog
specifies a program run everytime after a connection was shut down.
.Nm Isdnd
expects to find the program below the path
.Pa /etc/isdn
which is prepended to the string specified as a parameter to this keyword.
(optional)

.El
.El

.Sh IDLETIME CALCULATION AND SHORTHOLD MODE
.Bl -tag -width incoming calls -compact
.It Li incoming calls
It is assumed that the calling side knows most about charging structures and
such and as a consequence only the keyword
.Em idletime-incoming
has a function for incoming calls.
.Pp
For incoming calls the line is constantly monitored, and in case there was
not traffic taking place for the time in seconds specified by
.Em idletime-incoming
the call is closed.
.Pp
Typically,
.Em idletime-incoming
is used as a last resort and is therefore set much higher than a charging
unit time: typical values are one to five minutes.

.It Li outgoing calls
Outgoing call disconnect time can be setup in one of three ways:

.Bl -tag -width shorthold mode -compact
.It Li simple mode
For simple mode, the 
.Em idle-algorithm-outgoing
must be
.Em fix-unit-size
and the selected
.Em unitlength
must be 0 (zero) and
.Em idletime-outgoing
greater zero. 
.Pp
The outgoing traffic is constantly monitored, and in case there was
not traffic taking place for the time in seconds specified by
.Em idletime-outgoing
the call is closed.
.Pp
Typical values in simple mode are 10 to 30 seconds.

.It Li shorthold mode for fixed unit charging
For shorthold mode, the 
.Em idle-algorithm-outgoing
 must be
.Em fix-unit-size
 and the selected
.Em unitlength 
and 
.Em idletime-outgoing
must be greater than 0 (zero);
.Em earlyhangup must be >= 0 (zero).

.Bd -literal

|<unchecked-window>|<checkwindow>|<safetywindow>|
|                  |             |              |
+------------------+-------------+--------------+
|                  |             |              |
|                  |<-idle-time->|<earlyhangup->|
|<--------------unitlength--------------------->|

.Ed

During the unchecked window which is (unitlength - (idle-time+earlyhangup))
in length, no idle check is done. After the unchecked window has ended,
the line is checked for idle-time length if no traffic takes place. In case
there was traffic detected in the check-window, the same procedure is restarted
at the beginning of the next unit. In case no traffic was detected during
the check-window, the line is closed at the end of the check window.
.Pp
Notice: 
.Em unitlength
must (!) be greater than the sum of
.Em idletime-outgoing
and
.Em earlyhangup !

.It Li shorthold mode for variable unit charging
For shorthold mode, the 
.Em idle-algorithm-outgoing
must be
.Em var-unit-size
and the selected
.Em unitlength 
and
.Em idletime-outgoing
must be greater than 0 (zero);
.Pp

This shorthold mode is suitable when your calls are billed on
the elapse time of the call plus a fixed connection charge.
For example British Telecom bill this way.
.Pp

Each call is divided into two periods, the first is the
.Em unchecked
period and the second is the
.Em checked
. The
.Em checked
period starts 1 second before the first units time expires.
.Pp
During the
.Em checked
period if there is no traffic for
.Em idle-time
seconds the call is disconnected.
.Pp

.Bd -literal

|<---unchecked------------------>|<------checked------>
+------------------+-------------+
|                  |<-idle-time->|
|<--------------unitlength------->|

.Ed

Experience shows that useful values for idle-time are from 15 to 30 seconds.
.Pp
If idle-time is too short an application that is not yet finished with the
network will cause a new call to be placed.
.Pp
.El
.El

.Pp
.Sh FILES
.Bl -tag -width /etc/isdn/isdnd.rc -compact
.It Pa /etc/isdn/isdnd.rc
The default configuration file for the
.Nm isdnd
ISDN daemon.
.El
.Sh SEE ALSO
.Xr regex 3 ,
.Xr re_format 7 ,
.Xr isdnd 8 ,
.Xr isdnmonitor 8
.Sh AUTHORS
The 
.Xr isdnd 8
daemon and this manual page were written by
.An Hellmuth Michaelis Aq hm@kts.org .
.Pp
Additions to this manual page by
.An Barry Scott Aq barry@scottb.demon.co.uk .