/*- * Copyright (c) 1998,1999,2000,2001,2002 Søren Schmidt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ /* ATA register defines */ #define ATA_DATA 0x00 /* data register */ #define ATA_ERROR 0x01 /* (R) error register */ #define ATA_E_NM 0x02 /* no media */ #define ATA_E_ABORT 0x04 /* command aborted */ #define ATA_E_MCR 0x08 /* media change request */ #define ATA_E_IDNF 0x10 /* ID not found */ #define ATA_E_MC 0x20 /* media changed */ #define ATA_E_UNC 0x40 /* uncorrectable data */ #define ATA_E_ICRC 0x80 /* UDMA crc error */ #define ATA_FEATURE 0x01 /* (W) feature register */ #define ATA_F_DMA 0x01 /* enable DMA */ #define ATA_F_OVL 0x02 /* enable overlap */ #define ATA_COUNT 0x02 /* (W) sector count */ #define ATA_IREASON 0x02 /* (R) interrupt reason */ #define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ #define ATA_I_IN 0x02 /* read (1) | write (0) */ #define ATA_I_RELEASE 0x04 /* released bus (1) */ #define ATA_I_TAGMASK 0xf8 /* tag mask */ #define ATA_SECTOR 0x03 /* sector # */ #define ATA_CYL_LSB 0x04 /* cylinder# LSB */ #define ATA_CYL_MSB 0x05 /* cylinder# MSB */ #define ATA_DRIVE 0x06 /* Sector/Drive/Head register */ #define ATA_D_LBA 0x40 /* use LBA addressing */ #define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ #define ATA_CMD 0x07 /* command register */ #define ATA_C_NOP 0x00 /* NOP command */ #define ATA_C_F_FLUSHQUEUE 0x00 /* flush queued cmd's */ #define ATA_C_F_AUTOPOLL 0x01 /* start autopoll function */ #define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */ #define ATA_C_READ 0x20 /* read command */ #define ATA_C_READ48 0x24 /* read command */ #define ATA_C_READ_DMA48 0x25 /* read w/DMA command */ #define ATA_C_READ_DMA_QUEUED48 0x26 /* read w/DMA QUEUED command */ #define ATA_C_READ_MUL48 0x29 /* read multi command */ #define ATA_C_WRITE 0x30 /* write command */ #define ATA_C_WRITE48 0x34 /* write command */ #define ATA_C_WRITE_DMA48 0x35 /* write w/DMA command */ #define ATA_C_WRITE_DMA_QUEUED48 0x36 /* write w/DMA QUEUED command */ #define ATA_C_WRITE_MUL48 0x39 /* write multi command */ #define ATA_C_PACKET_CMD 0xa0 /* packet command */ #define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ #define ATA_C_SERVICE 0xa2 /* service command */ #define ATA_C_READ_MUL 0xc4 /* read multi command */ #define ATA_C_WRITE_MUL 0xc5 /* write multi command */ #define ATA_C_SET_MULTI 0xc6 /* set multi size command */ #define ATA_C_READ_DMA_QUEUED 0xc7 /* read w/DMA QUEUED command */ #define ATA_C_READ_DMA 0xc8 /* read w/DMA command */ #define ATA_C_WRITE_DMA 0xca /* write w/DMA command */ #define ATA_C_WRITE_DMA_QUEUED 0xcc /* write w/DMA QUEUED command */ #define ATA_C_SLEEP 0xe6 /* sleep command */ #define ATA_C_FLUSHCACHE 0xe7 /* flush cache to disk */ #define ATA_C_FLUSHCACHE48 0xea /* flush cache to disk */ #define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */ #define ATA_C_SETFEATURES 0xef /* features command */ #define ATA_C_F_SETXFER 0x03 /* set transfer mode */ #define ATA_C_F_ENAB_WCACHE 0x02 /* enable write cache */ #define ATA_C_F_DIS_WCACHE 0x82 /* disable write cache */ #define ATA_C_F_ENAB_RCACHE 0xaa /* enable readahead cache */ #define ATA_C_F_DIS_RCACHE 0x55 /* disable readahead cache */ #define ATA_C_F_ENAB_RELIRQ 0x5d /* enable release interrupt */ #define ATA_C_F_DIS_RELIRQ 0xdd /* disable release interrupt */ #define ATA_C_F_ENAB_SRVIRQ 0x5e /* enable service interrupt */ #define ATA_C_F_DIS_SRVIRQ 0xde /* disable service interrupt */ #define ATA_STATUS 0x07 /* status register */ #define ATA_S_ERROR 0x01 /* error */ #define ATA_S_INDEX 0x02 /* index */ #define ATA_S_CORR 0x04 /* data corrected */ #define ATA_S_DRQ 0x08 /* data request */ #define ATA_S_DSC 0x10 /* drive seek completed */ #define ATA_S_SERVICE 0x10 /* drive needs service */ #define ATA_S_DWF 0x20 /* drive write fault */ #define ATA_S_DMA 0x20 /* DMA ready */ #define ATA_S_READY 0x40 /* drive ready */ #define ATA_S_BUSY 0x80 /* busy */ #define ATA_ALTSTAT 0x00 /* alternate status register */ #define ATA_ALTOFFSET 0x206 /* alternate registers offset */ #define ATA_PCCARD_ALTOFFSET 0x0e /* do for PCCARD devices */ #define ATA_A_IDS 0x02 /* disable interrupts */ #define ATA_A_RESET 0x04 /* RESET controller */ #define ATA_A_4BIT 0x08 /* 4 head bits */ /* misc defines */ #define ATA_PRIMARY 0x1f0 #define ATA_SECONDARY 0x170 #define ATA_IOSIZE 0x08 #define ATA_ALTIOSIZE 0x01 #define ATA_BMIOSIZE 0x08 #define ATA_OP_FINISHED 0x00 #define ATA_OP_CONTINUES 0x01 #define ATA_IOADDR_RID 0 #define ATA_ALTADDR_RID 1 #define ATA_BMADDR_RID 2 #define ATA_IRQ_RID 0 #define ATA_DEV(device) ((device == ATA_MASTER) ? 0 : 1) /* busmaster DMA related defines */ #define ATA_DMA_ENTRIES 256 #define ATA_DMA_EOT 0x80000000 #define ATA_BMCMD_PORT 0x00 #define ATA_BMCMD_START_STOP 0x01 #define ATA_BMCMD_WRITE_READ 0x08 #define ATA_BMDEVSPEC_0 0x01 #define ATA_BMSTAT_PORT 0x02 #define ATA_BMSTAT_ACTIVE 0x01 #define ATA_BMSTAT_ERROR 0x02 #define ATA_BMSTAT_INTERRUPT 0x04 #define ATA_BMSTAT_MASK 0x07 #define ATA_BMSTAT_DMA_MASTER 0x20 #define ATA_BMSTAT_DMA_SLAVE 0x40 #define ATA_BMSTAT_DMA_SIMPLEX 0x80 #define ATA_BMDEVSPEC_1 0x03 #define ATA_BMDTP_PORT 0x04 /* structure for holding DMA address data */ struct ata_dmaentry { u_int32_t base; u_int32_t count; }; /* structure describing an ATA/ATAPI device */ struct ata_device { struct ata_channel *channel; int unit; /* unit number */ #define ATA_MASTER 0x00 #define ATA_SLAVE 0x10 char *name; /* device name */ struct ata_params *param; /* ata param structure */ void *driver; /* ptr to driver for device */ int flags; #define ATA_D_USE_CHS 0x0001 #define ATA_D_DETACHING 0x0002 #define ATA_D_MEDIA_CHANGED 0x0004 int mode; /* transfermode */ int cmd; /* last cmd executed */ void *result; /* misc data */ }; /* structure describing an ATA channel */ struct ata_channel { struct device *dev; /* device handle */ int unit; /* channel number */ struct resource *r_io; /* io addr resource handle */ struct resource *r_altio; /* altio addr resource handle */ struct resource *r_bmio; /* bmio addr resource handle */ struct resource *r_irq; /* interrupt of this channel */ void *ih; /* interrupt handle */ int (*intr_func)(struct ata_channel *); /* interrupt function */ u_int32_t chiptype; /* pciid of controller chip */ u_int32_t alignment; /* dma engine min alignment */ int flags; /* controller flags */ #define ATA_NO_SLAVE 0x01 #define ATA_USE_16BIT 0x02 #define ATA_ATAPI_DMA_RO 0x04 #define ATA_QUEUED 0x08 #define ATA_DMA_ACTIVE 0x10 struct ata_device device[2]; /* devices on this channel */ #define MASTER 0x00 #define SLAVE 0x01 int devices; /* what is present */ #define ATA_ATA_MASTER 0x01 #define ATA_ATA_SLAVE 0x02 #define ATA_ATAPI_MASTER 0x04 #define ATA_ATAPI_SLAVE 0x08 u_int8_t status; /* last controller status */ u_int8_t error; /* last controller error */ int active; /* active processing request */ #define ATA_IDLE 0x0000 #define ATA_IMMEDIATE 0x0001 #define ATA_WAIT_INTR 0x0002 #define ATA_WAIT_READY 0x0004 #define ATA_WAIT_MASK 0x0007 #define ATA_ACTIVE 0x0010 #define ATA_ACTIVE_ATA 0x0020 #define ATA_ACTIVE_ATAPI 0x0040 #define ATA_CONTROL 0x0080 TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */ TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */ void *running; /* currently running request */ }; /* disk bay/drawer related */ #define ATA_LED_OFF 0x00 #define ATA_LED_RED 0x01 #define ATA_LED_GREEN 0x02 #define ATA_LED_ORANGE 0x03 /* externs */ extern devclass_t ata_devclass; /* public prototypes */ int ata_probe(device_t); int ata_attach(device_t); int ata_detach(device_t); int ata_resume(device_t); void ata_start(struct ata_channel *); void ata_reset(struct ata_channel *); int ata_reinit(struct ata_channel *); int ata_wait(struct ata_device *, u_int8_t); int ata_command(struct ata_device *, u_int8_t, u_int64_t, u_int16_t, u_int8_t, int); void ata_drawerleds(struct ata_device *, u_int8_t); int ata_printf(struct ata_channel *, int, const char *, ...) __printflike(3, 4); int ata_prtdev(struct ata_device *, const char *, ...) __printflike(2, 3); void ata_set_name(struct ata_device *, char *, int); void ata_free_name(struct ata_device *); int ata_get_lun(u_int32_t *); int ata_test_lun(u_int32_t *, int); void ata_free_lun(u_int32_t *, int); char *ata_mode2str(int); int ata_pmode(struct ata_params *); int ata_wmode(struct ata_params *); int ata_umode(struct ata_params *); int ata_find_dev(device_t, u_int32_t, u_int32_t); void *ata_dmaalloc(struct ata_channel *, int); void ata_dmainit(struct ata_channel *, int, int, int, int); int ata_dmasetup(struct ata_channel *, int, struct ata_dmaentry *, caddr_t, int); void ata_dmastart(struct ata_channel *, int, struct ata_dmaentry *, int); int ata_dmastatus(struct ata_channel *); int ata_dmadone(struct ata_channel *); /* macros to hide busspace uglyness */ #define ATA_INB(res, offset) \ bus_space_read_1(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset)) #define ATA_INW(res, offset) \ bus_space_read_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset)) #define ATA_INL(res, offset) \ bus_space_read_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset)) #define ATA_INSW(res, offset, addr, count) \ bus_space_read_multi_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_INSL(res, offset, addr, count) \ bus_space_read_multi_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_OUTB(res, offset, value) \ bus_space_write_1(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset), (value)) #define ATA_OUTW(res, offset, value) \ bus_space_write_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset), (value)) #define ATA_OUTL(res, offset, value) \ bus_space_write_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), (offset), (value)) #define ATA_OUTSW(res, offset, addr, count) \ bus_space_write_multi_2(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count)) #define ATA_OUTSL(res, offset, addr, count) \ bus_space_write_multi_4(rman_get_bustag((res)), \ rman_get_bushandle((res)), \ (offset), (addr), (count))