/*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (augustss@carlstedt.se) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller. * * The EHCI 1.0 spec can be found at * http://developer.intel.com/technology/usb/download/ehci-r10.pdf * and the USB 2.0 spec at * http://www.usb.org/developers/docs/usb_20.zip */ /* The low level controller code for EHCI has been split into * PCI probes and EHCI specific code. This was done to facilitate the * sharing of code between *BSD's */ #include "opt_bus.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PCI_EHCI_VENDORID_ACERLABS 0x10b9 #define PCI_EHCI_VENDORID_AMD 0x1022 #define PCI_EHCI_VENDORID_APPLE 0x106b #define PCI_EHCI_VENDORID_CMDTECH 0x1095 #define PCI_EHCI_VENDORID_NEC 0x1033 #define PCI_EHCI_VENDORID_OPTI 0x1045 #define PCI_EHCI_VENDORID_SIS 0x1039 #define PCI_EHCI_DEVICEID_NEC 0x00e01033 static const char *ehci_device_nec = "NEC uPD 720100 USB 2.0 controller"; static const char *ehci_device_generic = "EHCI (generic) USB 2.0 controller"; #define PCI_EHCI_BASE_REG 0x10 static int ehci_pci_attach(device_t self); static int ehci_pci_detach(device_t self); static const char * ehci_pci_match(device_t self) { u_int32_t device_id = pci_get_devid(self); switch (device_id) { case PCI_EHCI_DEVICEID_NEC: return (ehci_device_nec); default: if (pci_get_class(self) == PCIC_SERIALBUS && pci_get_subclass(self) == PCIS_SERIALBUS_USB && pci_get_progif(self) == PCI_INTERFACE_EHCI) { return (ehci_device_generic); } } return NULL; /* dunno */ } static int ehci_pci_probe(device_t self) { const char *desc = ehci_pci_match(self); if (desc) { device_set_desc(self, desc); return 0; } else { return ENXIO; } } static int ehci_pci_attach(device_t self) { ehci_softc_t *sc = device_get_softc(self); device_t parent; device_t *neighbors; device_t *nbus; struct usbd_bus *bsc; int err; int rid; int ncomp; int count, buscount; int slot, function; int res; int i; switch(pci_read_config(self, PCI_USBREV, 1) & PCI_USBREV_MASK) { case PCI_USBREV_PRE_1_0: case PCI_USBREV_1_0: case PCI_USBREV_1_1: sc->sc_bus.usbrev = USBREV_UNKNOWN; printf("pre-2.0 USB rev\n"); return ENXIO; case PCI_USBREV_2_0: sc->sc_bus.usbrev = USBREV_2_0; break; default: sc->sc_bus.usbrev = USBREV_UNKNOWN; break; } pci_enable_busmaster(self); rid = PCI_CBMEM; sc->io_res = bus_alloc_resource(self, SYS_RES_MEMORY, &rid, 0, ~0, 1, RF_ACTIVE); if (!sc->io_res) { device_printf(self, "Could not map memory\n"); return ENXIO; } sc->iot = rman_get_bustag(sc->io_res); sc->ioh = rman_get_bushandle(sc->io_res); rid = 0; sc->irq_res = bus_alloc_resource(self, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (sc->irq_res == NULL) { device_printf(self, "Could not allocate irq\n"); ehci_pci_detach(self); return ENXIO; } sc->sc_bus.bdev = device_add_child(self, "usb", -1); if (!sc->sc_bus.bdev) { device_printf(self, "Could not add USB device\n"); ehci_pci_detach(self); return ENOMEM; } device_set_ivars(sc->sc_bus.bdev, sc); /* ehci_pci_match will never return NULL if ehci_pci_probe succeeded */ device_set_desc(sc->sc_bus.bdev, ehci_pci_match(self)); switch (pci_get_vendor(self)) { case PCI_EHCI_VENDORID_ACERLABS: sprintf(sc->sc_vendor, "AcerLabs"); break; case PCI_EHCI_VENDORID_AMD: sprintf(sc->sc_vendor, "AMD"); break; case PCI_EHCI_VENDORID_APPLE: sprintf(sc->sc_vendor, "Apple"); break; case PCI_EHCI_VENDORID_CMDTECH: sprintf(sc->sc_vendor, "CMDTECH"); break; case PCI_EHCI_VENDORID_NEC: sprintf(sc->sc_vendor, "NEC"); break; case PCI_EHCI_VENDORID_OPTI: sprintf(sc->sc_vendor, "OPTi"); break; case PCI_EHCI_VENDORID_SIS: sprintf(sc->sc_vendor, "SiS"); break; default: if (bootverbose) device_printf(self, "(New EHCI DeviceId=0x%08x)\n", pci_get_devid(self)); sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); } err = bus_setup_intr(self, sc->irq_res, INTR_TYPE_BIO, (driver_intr_t *) ehci_intr, sc, &sc->ih); if (err) { device_printf(self, "Could not setup irq, %d\n", err); sc->ih = NULL; ehci_pci_detach(self); return ENXIO; } /* * Find companion controllers. According to the spec they always * have lower function numbers so they should be enumerated already. */ parent = device_get_parent(self); res = device_get_children(parent, &neighbors, &count); if (res != 0) { device_printf(self, "Error finding companion busses\n"); ehci_pci_detach(self); return ENXIO; } ncomp = 0; slot = pci_get_slot(self); function = pci_get_function(self); for (i = 0; i < count; i++) { if (pci_get_slot(neighbors[i]) == slot && \ pci_get_function(neighbors[i]) < function) { res = device_get_children(neighbors[i], &nbus, &buscount); if (res != 0 || buscount != 1) continue; bsc = device_get_softc(nbus[0]); printf("ehci_pci_attach: companion %s\n", USBDEVNAME(bsc->bdev)); sc->sc_comps[ncomp++] = bsc; if (ncomp >= EHCI_COMPANION_MAX) break; } } sc->sc_ncomp = ncomp; err = ehci_init(sc); if (!err) err = device_probe_and_attach(sc->sc_bus.bdev); if (err) { device_printf(self, "USB init failed err=%d\n", err); #if 0 /* TODO */ ehci_pci_detach(self); #endif return EIO; } return 0; } static int ehci_pci_detach(device_t self) { ehci_softc_t *sc = device_get_softc(self); /* * XXX this code is not yet fit to be used as detach for the EHCI * controller */ /* * disable interrupts that might have been switched on in ehci_init */ if (sc->iot && sc->ioh) bus_space_write_4(sc->iot, sc->ioh, EHCI_USBINTR, 0); if (sc->irq_res && sc->ih) { int err = bus_teardown_intr(self, sc->irq_res, sc->ih); if (err) /* XXX or should we panic? */ device_printf(self, "Could not tear down irq, %d\n", err); sc->ih = NULL; } if (sc->sc_bus.bdev) { device_delete_child(self, sc->sc_bus.bdev); sc->sc_bus.bdev = NULL; } if (sc->irq_res) { bus_release_resource(self, SYS_RES_IRQ, 0, sc->irq_res); sc->irq_res = NULL; } if (sc->io_res) { bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, sc->io_res); sc->io_res = NULL; sc->iot = 0; sc->ioh = 0; } return 0; } static device_method_t ehci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, ehci_pci_probe), DEVMETHOD(device_attach, ehci_pci_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), {0, 0} }; static driver_t ehci_driver = { "ehci", ehci_methods, sizeof(ehci_softc_t), }; static devclass_t ehci_devclass; DRIVER_MODULE(ehci, pci, ehci_driver, ehci_devclass, 0, 0); DRIVER_MODULE(ehci, cardbus, ehci_driver, ehci_devclass, 0, 0);