/************************************************************************** Copyright (C) 2004-2005 Nicolai Haehnle et al. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation on the rights to use, copy, modify, merge, publish, distribute, sub license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. **************************************************************************/ /* * $FreeBSD$ */ #ifndef _R300_REG_H #define _R300_REG_H #define R300_MC_INIT_MISC_LAT_TIMER 0x180 # define R300_MC_MISC__MC_CPR_INIT_LAT_SHIFT 0 # define R300_MC_MISC__MC_VF_INIT_LAT_SHIFT 4 # define R300_MC_MISC__MC_DISP0R_INIT_LAT_SHIFT 8 # define R300_MC_MISC__MC_DISP1R_INIT_LAT_SHIFT 12 # define R300_MC_MISC__MC_FIXED_INIT_LAT_SHIFT 16 # define R300_MC_MISC__MC_E2R_INIT_LAT_SHIFT 20 # define R300_MC_MISC__MC_SAME_PAGE_PRIO_SHIFT 24 # define R300_MC_MISC__MC_GLOBW_INIT_LAT_SHIFT 28 #define R300_MC_INIT_GFX_LAT_TIMER 0x154 # define R300_MC_MISC__MC_G3D0R_INIT_LAT_SHIFT 0 # define R300_MC_MISC__MC_G3D1R_INIT_LAT_SHIFT 4 # define R300_MC_MISC__MC_G3D2R_INIT_LAT_SHIFT 8 # define R300_MC_MISC__MC_G3D3R_INIT_LAT_SHIFT 12 # define R300_MC_MISC__MC_TX0R_INIT_LAT_SHIFT 16 # define R300_MC_MISC__MC_TX1R_INIT_LAT_SHIFT 20 # define R300_MC_MISC__MC_GLOBR_INIT_LAT_SHIFT 24 # define R300_MC_MISC__MC_GLOBW_FULL_LAT_SHIFT 28 /* This file contains registers and constants for the R300. They have been found mostly by examining command buffers captured using glxtest, as well as by extrapolating some known registers and constants from the R200. I am fairly certain that they are correct unless stated otherwise in comments. */ #define R300_SE_VPORT_XSCALE 0x1D98 #define R300_SE_VPORT_XOFFSET 0x1D9C #define R300_SE_VPORT_YSCALE 0x1DA0 #define R300_SE_VPORT_YOFFSET 0x1DA4 #define R300_SE_VPORT_ZSCALE 0x1DA8 #define R300_SE_VPORT_ZOFFSET 0x1DAC /* This register is written directly and also starts data section in many 3d CP_PACKET3's */ #define R300_VAP_VF_CNTL 0x2084 # define R300_VAP_VF_CNTL__PRIM_TYPE__SHIFT 0 # define R300_VAP_VF_CNTL__PRIM_NONE (0<<0) # define R300_VAP_VF_CNTL__PRIM_POINTS (1<<0) # define R300_VAP_VF_CNTL__PRIM_LINES (2<<0) # define R300_VAP_VF_CNTL__PRIM_LINE_STRIP (3<<0) # define R300_VAP_VF_CNTL__PRIM_TRIANGLES (4<<0) # define R300_VAP_VF_CNTL__PRIM_TRIANGLE_FAN (5<<0) # define R300_VAP_VF_CNTL__PRIM_TRIANGLE_STRIP (6<<0) # define R300_VAP_VF_CNTL__PRIM_LINE_LOOP (12<<0) # define R300_VAP_VF_CNTL__PRIM_QUADS (13<<0) # define R300_VAP_VF_CNTL__PRIM_QUAD_STRIP (14<<0) # define R300_VAP_VF_CNTL__PRIM_POLYGON (15<<0) # define R300_VAP_VF_CNTL__PRIM_WALK__SHIFT 4 /* State based - direct writes to registers trigger vertex generation */ # define R300_VAP_VF_CNTL__PRIM_WALK_STATE_BASED (0<<4) # define R300_VAP_VF_CNTL__PRIM_WALK_INDICES (1<<4) # define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_LIST (2<<4) # define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_EMBEDDED (3<<4) /* I don't think I saw these three used.. */ # define R300_VAP_VF_CNTL__COLOR_ORDER__SHIFT 6 # define R300_VAP_VF_CNTL__TCL_OUTPUT_CTL_ENA__SHIFT 9 # define R300_VAP_VF_CNTL__PROG_STREAM_ENA__SHIFT 10 /* index size - when not set the indices are assumed to be 16 bit */ # define R300_VAP_VF_CNTL__INDEX_SIZE_32bit (1<<11) /* number of vertices */ # define R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16 /* BEGIN: Wild guesses */ #define R300_VAP_OUTPUT_VTX_FMT_0 0x2090 # define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0) # define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_PRESENT (1<<1) # define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_1_PRESENT (1<<2) /* GUESS */ # define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_2_PRESENT (1<<3) /* GUESS */ # define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_3_PRESENT (1<<4) /* GUESS */ # define R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT (1<<16) /* GUESS */ #define R300_VAP_OUTPUT_VTX_FMT_1 0x2094 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 # define R300_VAP_OUTPUT_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 /* END */ #define R300_SE_VTE_CNTL 0x20b0 # define R300_VPORT_X_SCALE_ENA 0x00000001 # define R300_VPORT_X_OFFSET_ENA 0x00000002 # define R300_VPORT_Y_SCALE_ENA 0x00000004 # define R300_VPORT_Y_OFFSET_ENA 0x00000008 # define R300_VPORT_Z_SCALE_ENA 0x00000010 # define R300_VPORT_Z_OFFSET_ENA 0x00000020 # define R300_VTX_XY_FMT 0x00000100 # define R300_VTX_Z_FMT 0x00000200 # define R300_VTX_W0_FMT 0x00000400 # define R300_VTX_W0_NORMALIZE 0x00000800 # define R300_VTX_ST_DENORMALIZED 0x00001000 /* BEGIN: Vertex data assembly - lots of uncertainties */ /* gap */ /* Where do we get our vertex data? // // Vertex data either comes either from immediate mode registers or from // vertex arrays. // There appears to be no mixed mode (though we can force the pitch of // vertex arrays to 0, effectively reusing the same element over and over // again). // // Immediate mode is controlled by the INPUT_CNTL registers. I am not sure // if these registers influence vertex array processing. // // Vertex arrays are controlled via the 3D_LOAD_VBPNTR packet3. // // In both cases, vertex attributes are then passed through INPUT_ROUTE. // Beginning with INPUT_ROUTE_0_0 is a list of WORDs that route vertex data // into the vertex processor's input registers. // The first word routes the first input, the second word the second, etc. // The corresponding input is routed into the register with the given index. // The list is ended by a word with INPUT_ROUTE_END set. // // Always set COMPONENTS_4 in immediate mode. */ #define R300_VAP_INPUT_ROUTE_0_0 0x2150 # define R300_INPUT_ROUTE_COMPONENTS_1 (0 << 0) # define R300_INPUT_ROUTE_COMPONENTS_2 (1 << 0) # define R300_INPUT_ROUTE_COMPONENTS_3 (2 << 0) # define R300_INPUT_ROUTE_COMPONENTS_4 (3 << 0) # define R300_INPUT_ROUTE_COMPONENTS_RGBA (4 << 0) /* GUESS */ # define R300_VAP_INPUT_ROUTE_IDX_SHIFT 8 # define R300_VAP_INPUT_ROUTE_IDX_MASK (31 << 8) /* GUESS */ # define R300_VAP_INPUT_ROUTE_END (1 << 13) # define R300_INPUT_ROUTE_IMMEDIATE_MODE (0 << 14) /* GUESS */ # define R300_INPUT_ROUTE_FLOAT (1 << 14) /* GUESS */ # define R300_INPUT_ROUTE_UNSIGNED_BYTE (2 << 14) /* GUESS */ # define R300_INPUT_ROUTE_FLOAT_COLOR (3 << 14) /* GUESS */ #define R300_VAP_INPUT_ROUTE_0_1 0x2154 #define R300_VAP_INPUT_ROUTE_0_2 0x2158 #define R300_VAP_INPUT_ROUTE_0_3 0x215C #define R300_VAP_INPUT_ROUTE_0_4 0x2160 #define R300_VAP_INPUT_ROUTE_0_5 0x2164 #define R300_VAP_INPUT_ROUTE_0_6 0x2168 #define R300_VAP_INPUT_ROUTE_0_7 0x216C /* gap */ /* Notes: // - always set up to produce at least two attributes: // if vertex program uses only position, fglrx will set normal, too // - INPUT_CNTL_0_COLOR and INPUT_CNTL_COLOR bits are always equal */ #define R300_VAP_INPUT_CNTL_0 0x2180 # define R300_INPUT_CNTL_0_COLOR 0x00000001 #define R300_VAP_INPUT_CNTL_1 0x2184 # define R300_INPUT_CNTL_POS 0x00000001 # define R300_INPUT_CNTL_NORMAL 0x00000002 # define R300_INPUT_CNTL_COLOR 0x00000004 # define R300_INPUT_CNTL_TC0 0x00000400 # define R300_INPUT_CNTL_TC1 0x00000800 # define R300_INPUT_CNTL_TC2 0x00001000 /* GUESS */ # define R300_INPUT_CNTL_TC3 0x00002000 /* GUESS */ # define R300_INPUT_CNTL_TC4 0x00004000 /* GUESS */ # define R300_INPUT_CNTL_TC5 0x00008000 /* GUESS */ # define R300_INPUT_CNTL_TC6 0x00010000 /* GUESS */ # define R300_INPUT_CNTL_TC7 0x00020000 /* GUESS */ /* gap */ /* Words parallel to INPUT_ROUTE_0; All words that are active in INPUT_ROUTE_0 // are set to a swizzling bit pattern, other words are 0. // // In immediate mode, the pattern is always set to xyzw. In vertex array // mode, the swizzling pattern is e.g. used to set zw components in texture // coordinates with only tweo components. */ #define R300_VAP_INPUT_ROUTE_1_0 0x21E0 # define R300_INPUT_ROUTE_SELECT_X 0 # define R300_INPUT_ROUTE_SELECT_Y 1 # define R300_INPUT_ROUTE_SELECT_Z 2 # define R300_INPUT_ROUTE_SELECT_W 3 # define R300_INPUT_ROUTE_SELECT_ZERO 4 # define R300_INPUT_ROUTE_SELECT_ONE 5 # define R300_INPUT_ROUTE_SELECT_MASK 7 # define R300_INPUT_ROUTE_X_SHIFT 0 # define R300_INPUT_ROUTE_Y_SHIFT 3 # define R300_INPUT_ROUTE_Z_SHIFT 6 # define R300_INPUT_ROUTE_W_SHIFT 9 # define R300_INPUT_ROUTE_ENABLE (15 << 12) #define R300_VAP_INPUT_ROUTE_1_1 0x21E4 #define R300_VAP_INPUT_ROUTE_1_2 0x21E8 #define R300_VAP_INPUT_ROUTE_1_3 0x21EC #define R300_VAP_INPUT_ROUTE_1_4 0x21F0 #define R300_VAP_INPUT_ROUTE_1_5 0x21F4 #define R300_VAP_INPUT_ROUTE_1_6 0x21F8 #define R300_VAP_INPUT_ROUTE_1_7 0x21FC /* END */ /* gap */ /* BEGIN: Upload vertex program and data // The programmable vertex shader unit has a memory bank of unknown size // that can be written to in 16 byte units by writing the address into // UPLOAD_ADDRESS, followed by data in UPLOAD_DATA (multiples of 4 DWORDs). // // Pointers into the memory bank are always in multiples of 16 bytes. // // The memory bank is divided into areas with fixed meaning. // // Starting at address UPLOAD_PROGRAM: Vertex program instructions. // Native limits reported by drivers from ATI suggest size 256 (i.e. 4KB), // whereas the difference between known addresses suggests size 512. // // Starting at address UPLOAD_PARAMETERS: Vertex program parameters. // Native reported limits and the VPI layout suggest size 256, whereas // difference between known addresses suggests size 512. // // At address UPLOAD_POINTSIZE is a vector (0, 0, ps, 0), where ps is the // floating point pointsize. The exact purpose of this state is uncertain, // as there is also the R300_RE_POINTSIZE register. // // Multiple vertex programs and parameter sets can be loaded at once, // which could explain the size discrepancy. */ #define R300_VAP_PVS_UPLOAD_ADDRESS 0x2200 # define R300_PVS_UPLOAD_PROGRAM 0x00000000 # define R300_PVS_UPLOAD_PARAMETERS 0x00000200 # define R300_PVS_UPLOAD_POINTSIZE 0x00000406 /* gap */ #define R300_VAP_PVS_UPLOAD_DATA 0x2208 /* END */ /* gap */ /* I do not know the purpose of this register. However, I do know that // it is set to 221C_CLEAR for clear operations and to 221C_NORMAL // for normal rendering. */ #define R300_VAP_UNKNOWN_221C 0x221C # define R300_221C_NORMAL 0x00000000 # define R300_221C_CLEAR 0x0001C000 /* gap */ /* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between // rendering commands and overwriting vertex program parameters. // Therefore, I suspect writing zero to 0x2284 synchronizes the engine and // avoids bugs caused by still running shaders reading bad data from memory. */ #define R300_VAP_PVS_WAITIDLE 0x2284 /* GUESS */ /* Absolutely no clue what this register is about. */ #define R300_VAP_UNKNOWN_2288 0x2288 # define R300_2288_R300 0x00750000 /* -- nh */ # define R300_2288_RV350 0x0000FFFF /* -- Vladimir */ /* gap */ /* Addresses are relative to the vertex program instruction area of the // memory bank. PROGRAM_END points to the last instruction of the active // program // // The meaning of the two UNKNOWN fields is obviously not known. However, // experiments so far have shown that both *must* point to an instruction // inside the vertex program, otherwise the GPU locks up. // fglrx usually sets CNTL_3_UNKNOWN to the end of the program and // CNTL_1_UNKNOWN points to instruction where last write to position takes place. // Most likely this is used to ignore rest of the program in cases where group of verts arent visible. // For some reason this "section" is sometimes accepted other instruction that have // no relationship with position calculations. */ #define R300_VAP_PVS_CNTL_1 0x22D0 # define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 # define R300_PVS_CNTL_1_POS_END_SHIFT 10 # define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 /* Addresses are relative the the vertex program parameters area. */ #define R300_VAP_PVS_CNTL_2 0x22D4 # define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 # define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 #define R300_VAP_PVS_CNTL_3 0x22D8 # define R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT 10 # define R300_PVS_CNTL_3_PROGRAM_UNKNOWN2_SHIFT 0 /* The entire range from 0x2300 to 0x2AC inclusive seems to be used for // immediate vertices */ #define R300_VAP_VTX_COLOR_R 0x2464 #define R300_VAP_VTX_COLOR_G 0x2468 #define R300_VAP_VTX_COLOR_B 0x246C #define R300_VAP_VTX_POS_0_X_1 0x2490 /* used for glVertex2*() */ #define R300_VAP_VTX_POS_0_Y_1 0x2494 #define R300_VAP_VTX_COLOR_PKD 0x249C /* RGBA */ #define R300_VAP_VTX_POS_0_X_2 0x24A0 /* used for glVertex3*() */ #define R300_VAP_VTX_POS_0_Y_2 0x24A4 #define R300_VAP_VTX_POS_0_Z_2 0x24A8 #define R300_VAP_VTX_END_OF_PKT 0x24AC /* write 0 to indicate end of packet? */ /* gap */ /* These are values from r300_reg/r300_reg.h - they are known to be correct and are here so we can use one register file instead of several - Vladimir */ #define R300_GB_VAP_RASTER_VTX_FMT_0 0x4000 # define R300_GB_VAP_RASTER_VTX_FMT_0__POS_PRESENT (1<<0) # define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_0_PRESENT (1<<1) # define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_1_PRESENT (1<<2) # define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_2_PRESENT (1<<3) # define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_3_PRESENT (1<<4) # define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_SPACE (0xf<<5) # define R300_GB_VAP_RASTER_VTX_FMT_0__PT_SIZE_PRESENT (0x1<<16) #define R300_GB_VAP_RASTER_VTX_FMT_1 0x4004 /* each of the following is 3 bits wide, specifies number of components */ # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 # define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 /* UNK30 seems to enables point to quad transformation on textures (or something closely related to that). This bit is rather fatal at the time being due to lackings at pixel shader side */ #define R300_GB_ENABLE 0x4008 # define R300_GB_POINT_STUFF_ENABLE (1<<0) # define R300_GB_LINE_STUFF_ENABLE (1<<1) # define R300_GB_TRIANGLE_STUFF_ENABLE (1<<2) # define R300_GB_STENCIL_AUTO_ENABLE (1<<4) # define R300_GB_UNK30 (1<<30) /* each of the following is 2 bits wide */ #define R300_GB_TEX_REPLICATE 0 #define R300_GB_TEX_ST 1 #define R300_GB_TEX_STR 2 # define R300_GB_TEX0_SOURCE_SHIFT 16 # define R300_GB_TEX1_SOURCE_SHIFT 18 # define R300_GB_TEX2_SOURCE_SHIFT 20 # define R300_GB_TEX3_SOURCE_SHIFT 22 # define R300_GB_TEX4_SOURCE_SHIFT 24 # define R300_GB_TEX5_SOURCE_SHIFT 26 # define R300_GB_TEX6_SOURCE_SHIFT 28 # define R300_GB_TEX7_SOURCE_SHIFT 30 /* MSPOS - positions for multisample antialiasing (?) */ #define R300_GB_MSPOS0 0x4010 /* shifts - each of the fields is 4 bits */ # define R300_GB_MSPOS0__MS_X0_SHIFT 0 # define R300_GB_MSPOS0__MS_Y0_SHIFT 4 # define R300_GB_MSPOS0__MS_X1_SHIFT 8 # define R300_GB_MSPOS0__MS_Y1_SHIFT 12 # define R300_GB_MSPOS0__MS_X2_SHIFT 16 # define R300_GB_MSPOS0__MS_Y2_SHIFT 20 # define R300_GB_MSPOS0__MSBD0_Y 24 # define R300_GB_MSPOS0__MSBD0_X 28 #define R300_GB_MSPOS1 0x4014 # define R300_GB_MSPOS1__MS_X3_SHIFT 0 # define R300_GB_MSPOS1__MS_Y3_SHIFT 4 # define R300_GB_MSPOS1__MS_X4_SHIFT 8 # define R300_GB_MSPOS1__MS_Y4_SHIFT 12 # define R300_GB_MSPOS1__MS_X5_SHIFT 16 # define R300_GB_MSPOS1__MS_Y5_SHIFT 20 # define R300_GB_MSPOS1__MSBD1 24 #define R300_GB_TILE_CONFIG 0x4018 # define R300_GB_TILE_ENABLE (1<<0) # define R300_GB_TILE_PIPE_COUNT_RV300 0 # define R300_GB_TILE_PIPE_COUNT_R300 (3<<1) # define R300_GB_TILE_PIPE_COUNT_R420 (7<<1) # define R300_GB_TILE_SIZE_8 0 # define R300_GB_TILE_SIZE_16 (1<<4) # define R300_GB_TILE_SIZE_32 (2<<4) # define R300_GB_SUPER_SIZE_1 (0<<6) # define R300_GB_SUPER_SIZE_2 (1<<6) # define R300_GB_SUPER_SIZE_4 (2<<6) # define R300_GB_SUPER_SIZE_8 (3<<6) # define R300_GB_SUPER_SIZE_16 (4<<6) # define R300_GB_SUPER_SIZE_32 (5<<6) # define R300_GB_SUPER_SIZE_64 (6<<6) # define R300_GB_SUPER_SIZE_128 (7<<6) # define R300_GB_SUPER_X_SHIFT 9 /* 3 bits wide */ # define R300_GB_SUPER_Y_SHIFT 12 /* 3 bits wide */ # define R300_GB_SUPER_TILE_A 0 # define R300_GB_SUPER_TILE_B (1<<15) # define R300_GB_SUBPIXEL_1_12 0 # define R300_GB_SUBPIXEL_1_16 (1<<16) #define R300_GB_FIFO_SIZE 0x4024 /* each of the following is 2 bits wide */ #define R300_GB_FIFO_SIZE_32 0 #define R300_GB_FIFO_SIZE_64 1 #define R300_GB_FIFO_SIZE_128 2 #define R300_GB_FIFO_SIZE_256 3 # define R300_SC_IFIFO_SIZE_SHIFT 0 # define R300_SC_TZFIFO_SIZE_SHIFT 2 # define R300_SC_BFIFO_SIZE_SHIFT 4 # define R300_US_OFIFO_SIZE_SHIFT 12 # define R300_US_WFIFO_SIZE_SHIFT 14 /* the following use the same constants as above, but meaning is is times 2 (i.e. instead of 32 words it means 64 */ # define R300_RS_TFIFO_SIZE_SHIFT 6 # define R300_RS_CFIFO_SIZE_SHIFT 8 # define R300_US_RAM_SIZE_SHIFT 10 /* watermarks, 3 bits wide */ # define R300_RS_HIGHWATER_COL_SHIFT 16 # define R300_RS_HIGHWATER_TEX_SHIFT 19 # define R300_OFIFO_HIGHWATER_SHIFT 22 /* two bits only */ # define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT 24 #define R300_GB_SELECT 0x401C # define R300_GB_FOG_SELECT_C0A 0 # define R300_GB_FOG_SELECT_C1A 1 # define R300_GB_FOG_SELECT_C2A 2 # define R300_GB_FOG_SELECT_C3A 3 # define R300_GB_FOG_SELECT_1_1_W 4 # define R300_GB_FOG_SELECT_Z 5 # define R300_GB_DEPTH_SELECT_Z 0 # define R300_GB_DEPTH_SELECT_1_1_W (1<<3) # define R300_GB_W_SELECT_1_W 0 # define R300_GB_W_SELECT_1 (1<<4) #define R300_GB_AA_CONFIG 0x4020 # define R300_AA_ENABLE 0x01 # define R300_AA_SUBSAMPLES_2 0 # define R300_AA_SUBSAMPLES_3 (1<<1) # define R300_AA_SUBSAMPLES_4 (2<<1) # define R300_AA_SUBSAMPLES_6 (3<<1) /* END */ /* gap */ /* The upper enable bits are guessed, based on fglrx reported limits. */ #define R300_TX_ENABLE 0x4104 # define R300_TX_ENABLE_0 (1 << 0) # define R300_TX_ENABLE_1 (1 << 1) # define R300_TX_ENABLE_2 (1 << 2) # define R300_TX_ENABLE_3 (1 << 3) # define R300_TX_ENABLE_4 (1 << 4) # define R300_TX_ENABLE_5 (1 << 5) # define R300_TX_ENABLE_6 (1 << 6) # define R300_TX_ENABLE_7 (1 << 7) # define R300_TX_ENABLE_8 (1 << 8) # define R300_TX_ENABLE_9 (1 << 9) # define R300_TX_ENABLE_10 (1 << 10) # define R300_TX_ENABLE_11 (1 << 11) # define R300_TX_ENABLE_12 (1 << 12) # define R300_TX_ENABLE_13 (1 << 13) # define R300_TX_ENABLE_14 (1 << 14) # define R300_TX_ENABLE_15 (1 << 15) /* The pointsize is given in multiples of 6. The pointsize can be // enormous: Clear() renders a single point that fills the entire // framebuffer. */ #define R300_RE_POINTSIZE 0x421C # define R300_POINTSIZE_Y_SHIFT 0 # define R300_POINTSIZE_Y_MASK (0xFFFF << 0) /* GUESS */ # define R300_POINTSIZE_X_SHIFT 16 # define R300_POINTSIZE_X_MASK (0xFFFF << 16) /* GUESS */ # define R300_POINTSIZE_MAX (R300_POINTSIZE_Y_MASK / 6) /* The line width is given in multiples of 6. In default mode lines are classified as vertical lines. HO: horizontal VE: vertical or horizontal HO & VE: no classification */ #define R300_RE_LINE_CNT 0x4234 # define R300_LINESIZE_SHIFT 0 # define R300_LINESIZE_MASK (0xFFFF << 0) /* GUESS */ # define R300_LINESIZE_MAX (R300_LINESIZE_MASK / 6) # define R300_LINE_CNT_HO (1 << 16) # define R300_LINE_CNT_VE (1 << 17) /* Some sort of scale or clamp value for texcoordless textures. */ #define R300_RE_UNK4238 0x4238 #define R300_RE_SHADE_MODEL 0x4278 # define R300_RE_SHADE_MODEL_SMOOTH 0x3aaaa # define R300_RE_SHADE_MODEL_FLAT 0x39595 /* Dangerous */ #define R300_RE_POLYGON_MODE 0x4288 # define R300_PM_ENABLED (1 << 0) # define R300_PM_FRONT_POINT (0 << 0) # define R300_PM_BACK_POINT (0 << 0) # define R300_PM_FRONT_LINE (1 << 4) # define R300_PM_FRONT_FILL (1 << 5) # define R300_PM_BACK_LINE (1 << 7) # define R300_PM_BACK_FILL (1 << 8) /* Not sure why there are duplicate of factor and constant values. My best guess so far is that there are seperate zbiases for test and write. Ordering might be wrong. Some of the tests indicate that fgl has a fallback implementation of zbias via pixel shaders. */ #define R300_RE_ZBIAS_T_FACTOR 0x42A4 #define R300_RE_ZBIAS_T_CONSTANT 0x42A8 #define R300_RE_ZBIAS_W_FACTOR 0x42AC #define R300_RE_ZBIAS_W_CONSTANT 0x42B0 /* This register needs to be set to (1<<1) for RV350 to correctly perform depth test (see --vb-triangles in r300_demo) Don't know about other chips. - Vladimir This is set to 3 when GL_POLYGON_OFFSET_FILL is on. My guess is that there are two bits for each zbias primitive (FILL, LINE, POINT). One to enable depth test and one for depth write. Yet this doesnt explain why depth writes work ... */ #define R300_RE_OCCLUSION_CNTL 0x42B4 # define R300_OCCLUSION_ON (1<<1) #define R300_RE_CULL_CNTL 0x42B8 # define R300_CULL_FRONT (1 << 0) # define R300_CULL_BACK (1 << 1) # define R300_FRONT_FACE_CCW (0 << 2) # define R300_FRONT_FACE_CW (1 << 2) /* BEGIN: Rasterization / Interpolators - many guesses // 0_UNKNOWN_18 has always been set except for clear operations. // TC_CNT is the number of incoming texture coordinate sets (i.e. it depends // on the vertex program, *not* the fragment program) */ #define R300_RS_CNTL_0 0x4300 # define R300_RS_CNTL_TC_CNT_SHIFT 2 # define R300_RS_CNTL_TC_CNT_MASK (7 << 2) # define R300_RS_CNTL_CI_CNT_SHIFT 7 /* number of color interpolators used */ # define R300_RS_CNTL_0_UNKNOWN_18 (1 << 18) /* Guess: RS_CNTL_1 holds the index of the highest used RS_ROUTE_n register. */ #define R300_RS_CNTL_1 0x4304 /* gap */ /* Only used for texture coordinates. // Use the source field to route texture coordinate input from the vertex program // to the desired interpolator. Note that the source field is relative to the // outputs the vertex program *actually* writes. If a vertex program only writes // texcoord[1], this will be source index 0. // Set INTERP_USED on all interpolators that produce data used by the // fragment program. INTERP_USED looks like a swizzling mask, but // I haven't seen it used that way. // // Note: The _UNKNOWN constants are always set in their respective register. // I don't know if this is necessary. */ #define R300_RS_INTERP_0 0x4310 #define R300_RS_INTERP_1 0x4314 # define R300_RS_INTERP_1_UNKNOWN 0x40 #define R300_RS_INTERP_2 0x4318 # define R300_RS_INTERP_2_UNKNOWN 0x80 #define R300_RS_INTERP_3 0x431C # define R300_RS_INTERP_3_UNKNOWN 0xC0 #define R300_RS_INTERP_4 0x4320 #define R300_RS_INTERP_5 0x4324 #define R300_RS_INTERP_6 0x4328 #define R300_RS_INTERP_7 0x432C # define R300_RS_INTERP_SRC_SHIFT 2 # define R300_RS_INTERP_SRC_MASK (7 << 2) # define R300_RS_INTERP_USED 0x00D10000 /* These DWORDs control how vertex data is routed into fragment program // registers, after interpolators. */ #define R300_RS_ROUTE_0 0x4330 #define R300_RS_ROUTE_1 0x4334 #define R300_RS_ROUTE_2 0x4338 #define R300_RS_ROUTE_3 0x433C /* GUESS */ #define R300_RS_ROUTE_4 0x4340 /* GUESS */ #define R300_RS_ROUTE_5 0x4344 /* GUESS */ #define R300_RS_ROUTE_6 0x4348 /* GUESS */ #define R300_RS_ROUTE_7 0x434C /* GUESS */ # define R300_RS_ROUTE_SOURCE_INTERP_0 0 # define R300_RS_ROUTE_SOURCE_INTERP_1 1 # define R300_RS_ROUTE_SOURCE_INTERP_2 2 # define R300_RS_ROUTE_SOURCE_INTERP_3 3 # define R300_RS_ROUTE_SOURCE_INTERP_4 4 # define R300_RS_ROUTE_SOURCE_INTERP_5 5 /* GUESS */ # define R300_RS_ROUTE_SOURCE_INTERP_6 6 /* GUESS */ # define R300_RS_ROUTE_SOURCE_INTERP_7 7 /* GUESS */ # define R300_RS_ROUTE_ENABLE (1 << 3) /* GUESS */ # define R300_RS_ROUTE_DEST_SHIFT 6 # define R300_RS_ROUTE_DEST_MASK (31 << 6) /* GUESS */ /* Special handling for color: When the fragment program uses color, // the ROUTE_0_COLOR bit is set and ROUTE_0_COLOR_DEST contains the // color register index. */ # define R300_RS_ROUTE_0_COLOR (1 << 14) # define R300_RS_ROUTE_0_COLOR_DEST_SHIFT 17 # define R300_RS_ROUTE_0_COLOR_DEST_MASK (31 << 17) /* GUESS */ /* As above, but for secondary color */ # define R300_RS_ROUTE_1_COLOR1 (1 << 14) # define R300_RS_ROUTE_1_COLOR1_DEST_SHIFT 17 # define R300_RS_ROUTE_1_COLOR1_DEST_MASK (31 << 17) # define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) /* END */ /* BEGIN: Scissors and cliprects // There are four clipping rectangles. Their corner coordinates are inclusive. // Every pixel is assigned a number from 0 and 15 by setting bits 0-3 depending // on whether the pixel is inside cliprects 0-3, respectively. For example, // if a pixel is inside cliprects 0 and 1, but outside 2 and 3, it is assigned // the number 3 (binary 0011). // Iff the bit corresponding to the pixel's number in RE_CLIPRECT_CNTL is set, // the pixel is rasterized. // // In addition to this, there is a scissors rectangle. Only pixels inside the // scissors rectangle are drawn. (coordinates are inclusive) // // For some reason, the top-left corner of the framebuffer is at (1440, 1440) // for the purpose of clipping and scissors. */ #define R300_RE_CLIPRECT_TL_0 0x43B0 #define R300_RE_CLIPRECT_BR_0 0x43B4 #define R300_RE_CLIPRECT_TL_1 0x43B8 #define R300_RE_CLIPRECT_BR_1 0x43BC #define R300_RE_CLIPRECT_TL_2 0x43C0 #define R300_RE_CLIPRECT_BR_2 0x43C4 #define R300_RE_CLIPRECT_TL_3 0x43C8 #define R300_RE_CLIPRECT_BR_3 0x43CC # define R300_CLIPRECT_OFFSET 1440 # define R300_CLIPRECT_MASK 0x1FFF # define R300_CLIPRECT_X_SHIFT 0 # define R300_CLIPRECT_X_MASK (0x1FFF << 0) # define R300_CLIPRECT_Y_SHIFT 13 # define R300_CLIPRECT_Y_MASK (0x1FFF << 13) #define R300_RE_CLIPRECT_CNTL 0x43D0 # define R300_CLIP_OUT (1 << 0) # define R300_CLIP_0 (1 << 1) # define R300_CLIP_1 (1 << 2) # define R300_CLIP_10 (1 << 3) # define R300_CLIP_2 (1 << 4) # define R300_CLIP_20 (1 << 5) # define R300_CLIP_21 (1 << 6) # define R300_CLIP_210 (1 << 7) # define R300_CLIP_3 (1 << 8) # define R300_CLIP_30 (1 << 9) # define R300_CLIP_31 (1 << 10) # define R300_CLIP_310 (1 << 11) # define R300_CLIP_32 (1 << 12) # define R300_CLIP_320 (1 << 13) # define R300_CLIP_321 (1 << 14) # define R300_CLIP_3210 (1 << 15) /* gap */ #define R300_RE_SCISSORS_TL 0x43E0 #define R300_RE_SCISSORS_BR 0x43E4 # define R300_SCISSORS_OFFSET 1440 # define R300_SCISSORS_X_SHIFT 0 # define R300_SCISSORS_X_MASK (0x1FFF << 0) # define R300_SCISSORS_Y_SHIFT 13 # define R300_SCISSORS_Y_MASK (0x1FFF << 13) /* END */ /* BEGIN: Texture specification // The texture specification dwords are grouped by meaning and not by texture unit. // This means that e.g. the offset for texture image unit N is found in register // TX_OFFSET_0 + (4*N) */ #define R300_TX_FILTER_0 0x4400 # define R300_TX_REPEAT 0 # define R300_TX_MIRRORED 1 # define R300_TX_CLAMP 4 # define R300_TX_CLAMP_TO_EDGE 2 # define R300_TX_CLAMP_TO_BORDER 6 # define R300_TX_WRAP_S_SHIFT 0 # define R300_TX_WRAP_S_MASK (7 << 0) # define R300_TX_WRAP_T_SHIFT 3 # define R300_TX_WRAP_T_MASK (7 << 3) # define R300_TX_WRAP_Q_SHIFT 6 # define R300_TX_WRAP_Q_MASK (7 << 6) # define R300_TX_MAG_FILTER_NEAREST (1 << 9) # define R300_TX_MAG_FILTER_LINEAR (2 << 9) # define R300_TX_MAG_FILTER_MASK (3 << 9) # define R300_TX_MIN_FILTER_NEAREST (1 << 11) # define R300_TX_MIN_FILTER_LINEAR (2 << 11) # define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11) # define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11) # define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) # define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11) /* NOTE: NEAREST doesnt seem to exist. Im not seting MAG_FILTER_MASK and (3 << 11) on for all anisotropy modes because that would void selected mag filter */ # define R300_TX_MIN_FILTER_ANISO_NEAREST ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) # define R300_TX_MIN_FILTER_ANISO_LINEAR ((0 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) # define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST ((1 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) # define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR ((2 << 13) /*|R300_TX_MAG_FILTER_MASK|(3<<11)*/) # define R300_TX_MIN_FILTER_MASK ( (15 << 11) | (3 << 13) ) # define R300_TX_MAX_ANISO_1_TO_1 (0 << 21) # define R300_TX_MAX_ANISO_2_TO_1 (2 << 21) # define R300_TX_MAX_ANISO_4_TO_1 (4 << 21) # define R300_TX_MAX_ANISO_8_TO_1 (6 << 21) # define R300_TX_MAX_ANISO_16_TO_1 (8 << 21) # define R300_TX_MAX_ANISO_MASK (14 << 21) #define R300_TX_UNK1_0 0x4440 # define R300_LOD_BIAS_MASK 0x1fff #define R300_TX_SIZE_0 0x4480 # define R300_TX_WIDTHMASK_SHIFT 0 # define R300_TX_WIDTHMASK_MASK (2047 << 0) # define R300_TX_HEIGHTMASK_SHIFT 11 # define R300_TX_HEIGHTMASK_MASK (2047 << 11) # define R300_TX_UNK23 (1 << 23) # define R300_TX_SIZE_SHIFT 26 /* largest of width, height */ # define R300_TX_SIZE_MASK (15 << 26) #define R300_TX_FORMAT_0 0x44C0 /* The interpretation of the format word by Wladimir van der Laan */ /* The X, Y, Z and W refer to the layout of the components. They are given meanings as R, G, B and Alpha by the swizzle specification */ # define R300_TX_FORMAT_X8 0x0 # define R300_TX_FORMAT_X16 0x1 # define R300_TX_FORMAT_Y4X4 0x2 # define R300_TX_FORMAT_Y8X8 0x3 # define R300_TX_FORMAT_Y16X16 0x4 # define R300_TX_FORMAT_Z3Y3X2 0x5 # define R300_TX_FORMAT_Z5Y6X5 0x6 # define R300_TX_FORMAT_Z6Y5X5 0x7 # define R300_TX_FORMAT_Z11Y11X10 0x8 # define R300_TX_FORMAT_Z10Y11X11 0x9 # define R300_TX_FORMAT_W4Z4Y4X4 0xA # define R300_TX_FORMAT_W1Z5Y5X5 0xB # define R300_TX_FORMAT_W8Z8Y8X8 0xC # define R300_TX_FORMAT_W2Z10Y10X10 0xD # define R300_TX_FORMAT_W16Z16Y16X16 0xE # define R300_TX_FORMAT_DXT1 0xF # define R300_TX_FORMAT_DXT3 0x10 # define R300_TX_FORMAT_DXT5 0x11 # define R300_TX_FORMAT_D3DMFT_CxV8U8 0x12 /* no swizzle */ # define R300_TX_FORMAT_A8R8G8B8 0x13 /* no swizzle */ # define R300_TX_FORMAT_B8G8_B8G8 0x14 /* no swizzle */ # define R300_TX_FORMAT_G8R8_G8B8 0x15 /* no swizzle */ /* 0x16 - some 16 bit green format.. ?? */ # define R300_TX_FORMAT_UNK25 (1 << 25) /* no swizzle */ /* gap */ /* Floating point formats */ /* Note - hardware supports both 16 and 32 bit floating point */ # define R300_TX_FORMAT_FL_I16 0x18 # define R300_TX_FORMAT_FL_I16A16 0x19 # define R300_TX_FORMAT_FL_R16G16B16A16 0x1A # define R300_TX_FORMAT_FL_I32 0x1B # define R300_TX_FORMAT_FL_I32A32 0x1C # define R300_TX_FORMAT_FL_R32G32B32A32 0x1D /* alpha modes, convenience mostly */ /* if you have alpha, pick constant appropriate to the number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */ # define R300_TX_FORMAT_ALPHA_1CH 0x000 # define R300_TX_FORMAT_ALPHA_2CH 0x200 # define R300_TX_FORMAT_ALPHA_4CH 0x600 # define R300_TX_FORMAT_ALPHA_NONE 0xA00 /* Swizzling */ /* constants */ # define R300_TX_FORMAT_X 0 # define R300_TX_FORMAT_Y 1 # define R300_TX_FORMAT_Z 2 # define R300_TX_FORMAT_W 3 # define R300_TX_FORMAT_ZERO 4 # define R300_TX_FORMAT_ONE 5 # define R300_TX_FORMAT_CUT_Z 6 /* 2.0*Z, everything above 1.0 is set to 0.0 */ # define R300_TX_FORMAT_CUT_W 7 /* 2.0*W, everything above 1.0 is set to 0.0 */ # define R300_TX_FORMAT_B_SHIFT 18 # define R300_TX_FORMAT_G_SHIFT 15 # define R300_TX_FORMAT_R_SHIFT 12 # define R300_TX_FORMAT_A_SHIFT 9 /* Convenience macro to take care of layout and swizzling */ # define R300_EASY_TX_FORMAT(B, G, R, A, FMT) (\ ((R300_TX_FORMAT_##B)<