/* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ /* * Adaptec AIC-6915 "Starfire" PCI fast ethernet driver for FreeBSD. * Programming manual is available from: * ftp.adaptec.com:/pub/BBS/userguides/aic6915_pg.pdf. * * Written by Bill Paul * Department of Electical Engineering * Columbia University, New York City */ /* * The Adaptec AIC-6915 "Starfire" is a 64-bit 10/100 PCI ethernet * controller designed with flexibility and reducing CPU load in mind. * The Starfire offers high and low priority buffer queues, a * producer/consumer index mechanism and several different buffer * queue and completion queue descriptor types. Any one of a number * of different driver designs can be used, depending on system and * OS requirements. This driver makes use of type0 transmit frame * descriptors (since BSD fragments packets across an mbuf chain) * and two RX buffer queues prioritized on size (one queue for small * frames that will fit into a single mbuf, another with full size * mbuf clusters for everything else). The producer/consumer indexes * and completion queues are also used. * * One downside to the Starfire has to do with alignment: buffer * queues must be aligned on 256-byte boundaries, and receive buffers * must be aligned on longword boundaries. The receive buffer alignment * causes problems on the Alpha platform, where the packet payload * should be longword aligned. There is no simple way around this. * * For receive filtering, the Starfire offers 16 perfect filter slots * and a 512-bit hash table. * * The Starfire has no internal transceiver, relying instead on an * external MII-based transceiver. Accessing registers on external * PHYs is done through a special register map rather than with the * usual bitbang MDIO method. * * Acesssing the registers on the Starfire is a little tricky. The * Starfire has a 512K internal register space. When programmed for * PCI memory mapped mode, the entire register space can be accessed * directly. However in I/O space mode, only 256 bytes are directly * mapped into PCI I/O space. The other registers can be accessed * indirectly using the SF_INDIRECTIO_ADDR and SF_INDIRECTIO_DATA * registers inside the 256-byte I/O window. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for vtophys */ #include /* for vtophys */ #include #include #include #include #include #include #include #include /* "controller miibus0" required. See GENERIC if you get errors here. */ #include "miibus_if.h" #include #include #define SF_USEIOSPACE #include MODULE_DEPEND(sf, miibus, 1, 1, 1); #ifndef lint static const char rcsid[] = "$FreeBSD$"; #endif static struct sf_type sf_devs[] = { { AD_VENDORID, AD_DEVICEID_STARFIRE, "Adaptec AIC-6915 10/100BaseTX" }, { 0, 0, NULL } }; static int sf_probe (device_t); static int sf_attach (device_t); static int sf_detach (device_t); static void sf_intr (void *); static void sf_stats_update (void *); static void sf_rxeof (struct sf_softc *); static void sf_txeof (struct sf_softc *); static int sf_encap (struct sf_softc *, struct sf_tx_bufdesc_type0 *, struct mbuf *); static void sf_start (struct ifnet *); static int sf_ioctl (struct ifnet *, u_long, caddr_t); static void sf_init (void *); static void sf_stop (struct sf_softc *); static void sf_watchdog (struct ifnet *); static void sf_shutdown (device_t); static int sf_ifmedia_upd (struct ifnet *); static void sf_ifmedia_sts (struct ifnet *, struct ifmediareq *); static void sf_reset (struct sf_softc *); static int sf_init_rx_ring (struct sf_softc *); static void sf_init_tx_ring (struct sf_softc *); static int sf_newbuf (struct sf_softc *, struct sf_rx_bufdesc_type0 *, struct mbuf *); static void sf_setmulti (struct sf_softc *); static int sf_setperf (struct sf_softc *, int, caddr_t); static int sf_sethash (struct sf_softc *, caddr_t, int); #ifdef notdef static int sf_setvlan (struct sf_softc *, int, u_int32_t); #endif static u_int8_t sf_read_eeprom (struct sf_softc *, int); static u_int32_t sf_calchash (caddr_t); static int sf_miibus_readreg (device_t, int, int); static int sf_miibus_writereg (device_t, int, int, int); static void sf_miibus_statchg (device_t); static u_int32_t csr_read_4 (struct sf_softc *, int); static void csr_write_4 (struct sf_softc *, int, u_int32_t); static void sf_txthresh_adjust (struct sf_softc *); #ifdef SF_USEIOSPACE #define SF_RES SYS_RES_IOPORT #define SF_RID SF_PCI_LOIO #else #define SF_RES SYS_RES_MEMORY #define SF_RID SF_PCI_LOMEM #endif static device_method_t sf_methods[] = { /* Device interface */ DEVMETHOD(device_probe, sf_probe), DEVMETHOD(device_attach, sf_attach), DEVMETHOD(device_detach, sf_detach), DEVMETHOD(device_shutdown, sf_shutdown), /* bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), /* MII interface */ DEVMETHOD(miibus_readreg, sf_miibus_readreg), DEVMETHOD(miibus_writereg, sf_miibus_writereg), DEVMETHOD(miibus_statchg, sf_miibus_statchg), { 0, 0 } }; static driver_t sf_driver = { "sf", sf_methods, sizeof(struct sf_softc), }; static devclass_t sf_devclass; DRIVER_MODULE(if_sf, pci, sf_driver, sf_devclass, 0, 0); DRIVER_MODULE(miibus, sf, miibus_driver, miibus_devclass, 0, 0); #define SF_SETBIT(sc, reg, x) \ csr_write_4(sc, reg, csr_read_4(sc, reg) | (x)) #define SF_CLRBIT(sc, reg, x) \ csr_write_4(sc, reg, csr_read_4(sc, reg) & ~(x)) static u_int32_t csr_read_4(sc, reg) struct sf_softc *sc; int reg; { u_int32_t val; #ifdef SF_USEIOSPACE CSR_WRITE_4(sc, SF_INDIRECTIO_ADDR, reg + SF_RMAP_INTREG_BASE); val = CSR_READ_4(sc, SF_INDIRECTIO_DATA); #else val = CSR_READ_4(sc, (reg + SF_RMAP_INTREG_BASE)); #endif return(val); } static u_int8_t sf_read_eeprom(sc, reg) struct sf_softc *sc; int reg; { u_int8_t val; val = (csr_read_4(sc, SF_EEADDR_BASE + (reg & 0xFFFFFFFC)) >> (8 * (reg & 3))) & 0xFF; return(val); } static void csr_write_4(sc, reg, val) struct sf_softc *sc; int reg; u_int32_t val; { #ifdef SF_USEIOSPACE CSR_WRITE_4(sc, SF_INDIRECTIO_ADDR, reg + SF_RMAP_INTREG_BASE); CSR_WRITE_4(sc, SF_INDIRECTIO_DATA, val); #else CSR_WRITE_4(sc, (reg + SF_RMAP_INTREG_BASE), val); #endif return; } static u_int32_t sf_calchash(addr) caddr_t addr; { u_int32_t crc, carry; int i, j; u_int8_t c; /* Compute CRC for the address value. */ crc = 0xFFFFFFFF; /* initial value */ for (i = 0; i < 6; i++) { c = *(addr + i); for (j = 0; j < 8; j++) { carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01); crc <<= 1; c >>= 1; if (carry) crc = (crc ^ 0x04c11db6) | carry; } } /* return the filter bit position */ return(crc >> 23 & 0x1FF); } /* * Copy the address 'mac' into the perfect RX filter entry at * offset 'idx.' The perfect filter only has 16 entries so do * some sanity tests. */ static int sf_setperf(sc, idx, mac) struct sf_softc *sc; int idx; caddr_t mac; { u_int16_t *p; if (idx < 0 || idx > SF_RXFILT_PERFECT_CNT) return(EINVAL); if (mac == NULL) return(EINVAL); p = (u_int16_t *)mac; csr_write_4(sc, SF_RXFILT_PERFECT_BASE + (idx * SF_RXFILT_PERFECT_SKIP), htons(p[2])); csr_write_4(sc, SF_RXFILT_PERFECT_BASE + (idx * SF_RXFILT_PERFECT_SKIP) + 4, htons(p[1])); csr_write_4(sc, SF_RXFILT_PERFECT_BASE + (idx * SF_RXFILT_PERFECT_SKIP) + 8, htons(p[0])); return(0); } /* * Set the bit in the 512-bit hash table that corresponds to the * specified mac address 'mac.' If 'prio' is nonzero, update the * priority hash table instead of the filter hash table. */ static int sf_sethash(sc, mac, prio) struct sf_softc *sc; caddr_t mac; int prio; { u_int32_t h = 0; if (mac == NULL) return(EINVAL); h = sf_calchash(mac); if (prio) { SF_SETBIT(sc, SF_RXFILT_HASH_BASE + SF_RXFILT_HASH_PRIOOFF + (SF_RXFILT_HASH_SKIP * (h >> 4)), (1 << (h & 0xF))); } else { SF_SETBIT(sc, SF_RXFILT_HASH_BASE + SF_RXFILT_HASH_ADDROFF + (SF_RXFILT_HASH_SKIP * (h >> 4)), (1 << (h & 0xF))); } return(0); } #ifdef notdef /* * Set a VLAN tag in the receive filter. */ static int sf_setvlan(sc, idx, vlan) struct sf_softc *sc; int idx; u_int32_t vlan; { if (idx < 0 || idx >> SF_RXFILT_HASH_CNT) return(EINVAL); csr_write_4(sc, SF_RXFILT_HASH_BASE + (idx * SF_RXFILT_HASH_SKIP) + SF_RXFILT_HASH_VLANOFF, vlan); return(0); } #endif static int sf_miibus_readreg(dev, phy, reg) device_t dev; int phy, reg; { struct sf_softc *sc; int i; u_int32_t val = 0; sc = device_get_softc(dev); for (i = 0; i < SF_TIMEOUT; i++) { val = csr_read_4(sc, SF_PHY_REG(phy, reg)); if (val & SF_MII_DATAVALID) break; } if (i == SF_TIMEOUT) return(0); if ((val & 0x0000FFFF) == 0xFFFF) return(0); return(val & 0x0000FFFF); } static int sf_miibus_writereg(dev, phy, reg, val) device_t dev; int phy, reg, val; { struct sf_softc *sc; int i; int busy; sc = device_get_softc(dev); csr_write_4(sc, SF_PHY_REG(phy, reg), val); for (i = 0; i < SF_TIMEOUT; i++) { busy = csr_read_4(sc, SF_PHY_REG(phy, reg)); if (!(busy & SF_MII_BUSY)) break; } return(0); } static void sf_miibus_statchg(dev) device_t dev; { struct sf_softc *sc; struct mii_data *mii; sc = device_get_softc(dev); mii = device_get_softc(sc->sf_miibus); if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_FULLDUPLEX); csr_write_4(sc, SF_BKTOBKIPG, SF_IPGT_FDX); } else { SF_CLRBIT(sc, SF_MACCFG_1, SF_MACCFG1_FULLDUPLEX); csr_write_4(sc, SF_BKTOBKIPG, SF_IPGT_HDX); } return; } static void sf_setmulti(sc) struct sf_softc *sc; { struct ifnet *ifp; int i; struct ifmultiaddr *ifma; u_int8_t dummy[] = { 0, 0, 0, 0, 0, 0 }; ifp = &sc->arpcom.ac_if; /* First zot all the existing filters. */ for (i = 1; i < SF_RXFILT_PERFECT_CNT; i++) sf_setperf(sc, i, (char *)&dummy); for (i = SF_RXFILT_HASH_BASE; i < (SF_RXFILT_HASH_MAX + 1); i += 4) csr_write_4(sc, i, 0); SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_ALLMULTI); /* Now program new ones. */ if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_ALLMULTI); } else { i = 1; TAILQ_FOREACH_REVERSE(ifma, &ifp->if_multiaddrs, ifmultihead, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; /* * Program the first 15 multicast groups * into the perfect filter. For all others, * use the hash table. */ if (i < SF_RXFILT_PERFECT_CNT) { sf_setperf(sc, i, LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); i++; continue; } sf_sethash(sc, LLADDR((struct sockaddr_dl *)ifma->ifma_addr), 0); } } return; } /* * Set media options. */ static int sf_ifmedia_upd(ifp) struct ifnet *ifp; { struct sf_softc *sc; struct mii_data *mii; sc = ifp->if_softc; mii = device_get_softc(sc->sf_miibus); sc->sf_link = 0; if (mii->mii_instance) { struct mii_softc *miisc; LIST_FOREACH(miisc, &mii->mii_phys, mii_list) mii_phy_reset(miisc); } mii_mediachg(mii); return(0); } /* * Report current media status. */ static void sf_ifmedia_sts(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { struct sf_softc *sc; struct mii_data *mii; sc = ifp->if_softc; mii = device_get_softc(sc->sf_miibus); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; return; } static int sf_ioctl(ifp, command, data) struct ifnet *ifp; u_long command; caddr_t data; { struct sf_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; struct mii_data *mii; int error = 0; SF_LOCK(sc); switch(command) { case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { if (ifp->if_flags & IFF_RUNNING && ifp->if_flags & IFF_PROMISC && !(sc->sf_if_flags & IFF_PROMISC)) { SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC); } else if (ifp->if_flags & IFF_RUNNING && !(ifp->if_flags & IFF_PROMISC) && sc->sf_if_flags & IFF_PROMISC) { SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC); } else if (!(ifp->if_flags & IFF_RUNNING)) sf_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) sf_stop(sc); } sc->sf_if_flags = ifp->if_flags; error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: sf_setmulti(sc); error = 0; break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: mii = device_get_softc(sc->sf_miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); break; default: error = ether_ioctl(ifp, command, data); break; } SF_UNLOCK(sc); return(error); } static void sf_reset(sc) struct sf_softc *sc; { register int i; csr_write_4(sc, SF_GEN_ETH_CTL, 0); SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_SOFTRESET); DELAY(1000); SF_CLRBIT(sc, SF_MACCFG_1, SF_MACCFG1_SOFTRESET); SF_SETBIT(sc, SF_PCI_DEVCFG, SF_PCIDEVCFG_RESET); for (i = 0; i < SF_TIMEOUT; i++) { DELAY(10); if (!(csr_read_4(sc, SF_PCI_DEVCFG) & SF_PCIDEVCFG_RESET)) break; } if (i == SF_TIMEOUT) printf("sf%d: reset never completed!\n", sc->sf_unit); /* Wait a little while for the chip to get its brains in order. */ DELAY(1000); return; } /* * Probe for an Adaptec AIC-6915 chip. Check the PCI vendor and device * IDs against our list and return a device name if we find a match. * We also check the subsystem ID so that we can identify exactly which * NIC has been found, if possible. */ static int sf_probe(dev) device_t dev; { struct sf_type *t; t = sf_devs; while(t->sf_name != NULL) { if ((pci_get_vendor(dev) == t->sf_vid) && (pci_get_device(dev) == t->sf_did)) { switch((pci_read_config(dev, SF_PCI_SUBVEN_ID, 4) >> 16) & 0xFFFF) { case AD_SUBSYSID_62011_REV0: case AD_SUBSYSID_62011_REV1: device_set_desc(dev, "Adaptec ANA-62011 10/100BaseTX"); return(0); break; case AD_SUBSYSID_62022: device_set_desc(dev, "Adaptec ANA-62022 10/100BaseTX"); return(0); break; case AD_SUBSYSID_62044_REV0: case AD_SUBSYSID_62044_REV1: device_set_desc(dev, "Adaptec ANA-62044 10/100BaseTX"); return(0); break; case AD_SUBSYSID_62020: device_set_desc(dev, "Adaptec ANA-62020 10/100BaseFX"); return(0); break; case AD_SUBSYSID_69011: device_set_desc(dev, "Adaptec ANA-69011 10/100BaseTX"); return(0); break; default: device_set_desc(dev, t->sf_name); return(0); break; } } t++; } return(ENXIO); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ static int sf_attach(dev) device_t dev; { int i; u_int32_t command; struct sf_softc *sc; struct ifnet *ifp; int unit, rid, error = 0; sc = device_get_softc(dev); unit = device_get_unit(dev); mtx_init(&sc->sf_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE); /* * Handle power management nonsense. */ if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { u_int32_t iobase, membase, irq; /* Save important PCI config data. */ iobase = pci_read_config(dev, SF_PCI_LOIO, 4); membase = pci_read_config(dev, SF_PCI_LOMEM, 4); irq = pci_read_config(dev, SF_PCI_INTLINE, 4); /* Reset the power state. */ printf("sf%d: chip is in D%d power mode " "-- setting to D0\n", unit, pci_get_powerstate(dev)); pci_set_powerstate(dev, PCI_POWERSTATE_D0); /* Restore PCI config data. */ pci_write_config(dev, SF_PCI_LOIO, iobase, 4); pci_write_config(dev, SF_PCI_LOMEM, membase, 4); pci_write_config(dev, SF_PCI_INTLINE, irq, 4); } /* * Map control/status registers. */ pci_enable_busmaster(dev); pci_enable_io(dev, SYS_RES_IOPORT); pci_enable_io(dev, SYS_RES_MEMORY); command = pci_read_config(dev, PCIR_COMMAND, 4); #ifdef SF_USEIOSPACE if (!(command & PCIM_CMD_PORTEN)) { printf("sf%d: failed to enable I/O ports!\n", unit); error = ENXIO; goto fail; } #else if (!(command & PCIM_CMD_MEMEN)) { printf("sf%d: failed to enable memory mapping!\n", unit); error = ENXIO; goto fail; } #endif rid = SF_RID; sc->sf_res = bus_alloc_resource(dev, SF_RES, &rid, 0, ~0, 1, RF_ACTIVE); if (sc->sf_res == NULL) { printf ("sf%d: couldn't map ports\n", unit); error = ENXIO; goto fail; } sc->sf_btag = rman_get_bustag(sc->sf_res); sc->sf_bhandle = rman_get_bushandle(sc->sf_res); /* Allocate interrupt */ rid = 0; sc->sf_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (sc->sf_irq == NULL) { printf("sf%d: couldn't map interrupt\n", unit); error = ENXIO; goto fail; } callout_handle_init(&sc->sf_stat_ch); /* Reset the adapter. */ sf_reset(sc); /* * Get station address from the EEPROM. */ for (i = 0; i < ETHER_ADDR_LEN; i++) sc->arpcom.ac_enaddr[i] = sf_read_eeprom(sc, SF_EE_NODEADDR + ETHER_ADDR_LEN - i); /* * An Adaptec chip was detected. Inform the world. */ printf("sf%d: Ethernet address: %6D\n", unit, sc->arpcom.ac_enaddr, ":"); sc->sf_unit = unit; /* Allocate the descriptor queues. */ sc->sf_ldata = contigmalloc(sizeof(struct sf_list_data), M_DEVBUF, M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); if (sc->sf_ldata == NULL) { printf("sf%d: no memory for list buffers!\n", unit); error = ENXIO; goto fail; } bzero(sc->sf_ldata, sizeof(struct sf_list_data)); /* Do MII setup. */ if (mii_phy_probe(dev, &sc->sf_miibus, sf_ifmedia_upd, sf_ifmedia_sts)) { printf("sf%d: MII without any phy!\n", sc->sf_unit); error = ENXIO; goto fail; } ifp = &sc->arpcom.ac_if; ifp->if_softc = sc; ifp->if_unit = unit; ifp->if_name = "sf"; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = sf_ioctl; ifp->if_output = ether_output; ifp->if_start = sf_start; ifp->if_watchdog = sf_watchdog; ifp->if_init = sf_init; ifp->if_baudrate = 10000000; ifp->if_snd.ifq_maxlen = SF_TX_DLIST_CNT - 1; /* * Call MI attach routine. */ ether_ifattach(ifp, sc->arpcom.ac_enaddr); error = bus_setup_intr(dev, sc->sf_irq, INTR_TYPE_NET, sf_intr, sc, &sc->sf_intrhand); if (error) { printf("sf%d: couldn't set up irq\n", unit); goto fail; } fail: if (error) sf_detach(dev); return(error); } static int sf_detach(dev) device_t dev; { struct sf_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); KASSERT(mtx_initialized(&sc->sf_mtx), ("sf mutex not initialized")); SF_LOCK(sc); ifp = &sc->arpcom.ac_if; if (device_is_alive(dev)) { if (bus_child_present(dev)) sf_stop(sc); ether_ifdetach(ifp); device_delete_child(dev, sc->sf_miibus); bus_generic_detach(dev); } if (sc->sf_intrhand) bus_teardown_intr(dev, sc->sf_irq, sc->sf_intrhand); if (sc->sf_irq) bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sf_irq); if (sc->sf_res) bus_release_resource(dev, SF_RES, SF_RID, sc->sf_res); if (sc->sf_ldata) contigfree(sc->sf_ldata, sizeof(struct sf_list_data), M_DEVBUF); SF_UNLOCK(sc); mtx_destroy(&sc->sf_mtx); return(0); } static int sf_init_rx_ring(sc) struct sf_softc *sc; { struct sf_list_data *ld; int i; ld = sc->sf_ldata; bzero((char *)ld->sf_rx_dlist_big, sizeof(struct sf_rx_bufdesc_type0) * SF_RX_DLIST_CNT); bzero((char *)ld->sf_rx_clist, sizeof(struct sf_rx_cmpdesc_type3) * SF_RX_CLIST_CNT); for (i = 0; i < SF_RX_DLIST_CNT; i++) { if (sf_newbuf(sc, &ld->sf_rx_dlist_big[i], NULL) == ENOBUFS) return(ENOBUFS); } return(0); } static void sf_init_tx_ring(sc) struct sf_softc *sc; { struct sf_list_data *ld; int i; ld = sc->sf_ldata; bzero((char *)ld->sf_tx_dlist, sizeof(struct sf_tx_bufdesc_type0) * SF_TX_DLIST_CNT); bzero((char *)ld->sf_tx_clist, sizeof(struct sf_tx_cmpdesc_type0) * SF_TX_CLIST_CNT); for (i = 0; i < SF_TX_DLIST_CNT; i++) ld->sf_tx_dlist[i].sf_id = SF_TX_BUFDESC_ID; for (i = 0; i < SF_TX_CLIST_CNT; i++) ld->sf_tx_clist[i].sf_type = SF_TXCMPTYPE_TX; ld->sf_tx_dlist[SF_TX_DLIST_CNT - 1].sf_end = 1; sc->sf_tx_cnt = 0; return; } static int sf_newbuf(sc, c, m) struct sf_softc *sc; struct sf_rx_bufdesc_type0 *c; struct mbuf *m; { struct mbuf *m_new = NULL; if (m == NULL) { MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) return(ENOBUFS); MCLGET(m_new, M_DONTWAIT); if (!(m_new->m_flags & M_EXT)) { m_freem(m_new); return(ENOBUFS); } m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; } else { m_new = m; m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; m_new->m_data = m_new->m_ext.ext_buf; } m_adj(m_new, sizeof(u_int64_t)); c->sf_mbuf = m_new; c->sf_addrlo = SF_RX_HOSTADDR(vtophys(mtod(m_new, caddr_t))); c->sf_valid = 1; return(0); } /* * The starfire is programmed to use 'normal' mode for packet reception, * which means we use the consumer/producer model for both the buffer * descriptor queue and the completion descriptor queue. The only problem * with this is that it involves a lot of register accesses: we have to * read the RX completion consumer and producer indexes and the RX buffer * producer index, plus the RX completion consumer and RX buffer producer * indexes have to be updated. It would have been easier if Adaptec had * put each index in a separate register, especially given that the damn * NIC has a 512K register space. * * In spite of all the lovely features that Adaptec crammed into the 6915, * it is marred by one truly stupid design flaw, which is that receive * buffer addresses must be aligned on a longword boundary. This forces * the packet payload to be unaligned, which is suboptimal on the x86 and * completely unuseable on the Alpha. Our only recourse is to copy received * packets into properly aligned buffers before handing them off. */ static void sf_rxeof(sc) struct sf_softc *sc; { struct mbuf *m; struct ifnet *ifp; struct sf_rx_bufdesc_type0 *desc; struct sf_rx_cmpdesc_type3 *cur_rx; u_int32_t rxcons, rxprod; int cmpprodidx, cmpconsidx, bufprodidx; ifp = &sc->arpcom.ac_if; rxcons = csr_read_4(sc, SF_CQ_CONSIDX); rxprod = csr_read_4(sc, SF_RXDQ_PTR_Q1); cmpprodidx = SF_IDX_LO(csr_read_4(sc, SF_CQ_PRODIDX)); cmpconsidx = SF_IDX_LO(rxcons); bufprodidx = SF_IDX_LO(rxprod); while (cmpconsidx != cmpprodidx) { struct mbuf *m0; cur_rx = &sc->sf_ldata->sf_rx_clist[cmpconsidx]; desc = &sc->sf_ldata->sf_rx_dlist_big[cur_rx->sf_endidx]; m = desc->sf_mbuf; SF_INC(cmpconsidx, SF_RX_CLIST_CNT); SF_INC(bufprodidx, SF_RX_DLIST_CNT); if (!(cur_rx->sf_status1 & SF_RXSTAT1_OK)) { ifp->if_ierrors++; sf_newbuf(sc, desc, m); continue; } m0 = m_devget(mtod(m, char *), cur_rx->sf_len, ETHER_ALIGN, ifp, NULL); sf_newbuf(sc, desc, m); if (m0 == NULL) { ifp->if_ierrors++; continue; } m = m0; ifp->if_ipackets++; (*ifp->if_input)(ifp, m); } csr_write_4(sc, SF_CQ_CONSIDX, (rxcons & ~SF_CQ_CONSIDX_RXQ1) | cmpconsidx); csr_write_4(sc, SF_RXDQ_PTR_Q1, (rxprod & ~SF_RXDQ_PRODIDX) | bufprodidx); return; } /* * Read the transmit status from the completion queue and release * mbufs. Note that the buffer descriptor index in the completion * descriptor is an offset from the start of the transmit buffer * descriptor list in bytes. This is important because the manual * gives the impression that it should match the producer/consumer * index, which is the offset in 8 byte blocks. */ static void sf_txeof(sc) struct sf_softc *sc; { int txcons, cmpprodidx, cmpconsidx; struct sf_tx_cmpdesc_type1 *cur_cmp; struct sf_tx_bufdesc_type0 *cur_tx; struct ifnet *ifp; ifp = &sc->arpcom.ac_if; txcons = csr_read_4(sc, SF_CQ_CONSIDX); cmpprodidx = SF_IDX_HI(csr_read_4(sc, SF_CQ_PRODIDX)); cmpconsidx = SF_IDX_HI(txcons); while (cmpconsidx != cmpprodidx) { cur_cmp = &sc->sf_ldata->sf_tx_clist[cmpconsidx]; cur_tx = &sc->sf_ldata->sf_tx_dlist[cur_cmp->sf_index >> 7]; if (cur_cmp->sf_txstat & SF_TXSTAT_TX_OK) ifp->if_opackets++; else { if (cur_cmp->sf_txstat & SF_TXSTAT_TX_UNDERRUN) sf_txthresh_adjust(sc); ifp->if_oerrors++; } sc->sf_tx_cnt--; if (cur_tx->sf_mbuf != NULL) { m_freem(cur_tx->sf_mbuf); cur_tx->sf_mbuf = NULL; } else break; SF_INC(cmpconsidx, SF_TX_CLIST_CNT); } ifp->if_timer = 0; ifp->if_flags &= ~IFF_OACTIVE; csr_write_4(sc, SF_CQ_CONSIDX, (txcons & ~SF_CQ_CONSIDX_TXQ) | ((cmpconsidx << 16) & 0xFFFF0000)); return; } static void sf_txthresh_adjust(sc) struct sf_softc *sc; { u_int32_t txfctl; u_int8_t txthresh; txfctl = csr_read_4(sc, SF_TX_FRAMCTL); txthresh = txfctl & SF_TXFRMCTL_TXTHRESH; if (txthresh < 0xFF) { txthresh++; txfctl &= ~SF_TXFRMCTL_TXTHRESH; txfctl |= txthresh; #ifdef DIAGNOSTIC printf("sf%d: tx underrun, increasing " "tx threshold to %d bytes\n", sc->sf_unit, txthresh * 4); #endif csr_write_4(sc, SF_TX_FRAMCTL, txfctl); } return; } static void sf_intr(arg) void *arg; { struct sf_softc *sc; struct ifnet *ifp; u_int32_t status; sc = arg; SF_LOCK(sc); ifp = &sc->arpcom.ac_if; if (!(csr_read_4(sc, SF_ISR_SHADOW) & SF_ISR_PCIINT_ASSERTED)) { SF_UNLOCK(sc); return; } /* Disable interrupts. */ csr_write_4(sc, SF_IMR, 0x00000000); for (;;) { status = csr_read_4(sc, SF_ISR); if (status) csr_write_4(sc, SF_ISR, status); if (!(status & SF_INTRS)) break; if (status & SF_ISR_RXDQ1_DMADONE) sf_rxeof(sc); if (status & SF_ISR_TX_TXDONE || status & SF_ISR_TX_DMADONE || status & SF_ISR_TX_QUEUEDONE) sf_txeof(sc); if (status & SF_ISR_TX_LOFIFO) sf_txthresh_adjust(sc); if (status & SF_ISR_ABNORMALINTR) { if (status & SF_ISR_STATSOFLOW) { untimeout(sf_stats_update, sc, sc->sf_stat_ch); sf_stats_update(sc); } else sf_init(sc); } } /* Re-enable interrupts. */ csr_write_4(sc, SF_IMR, SF_INTRS); if (ifp->if_snd.ifq_head != NULL) sf_start(ifp); SF_UNLOCK(sc); return; } static void sf_init(xsc) void *xsc; { struct sf_softc *sc; struct ifnet *ifp; struct mii_data *mii; int i; sc = xsc; SF_LOCK(sc); ifp = &sc->arpcom.ac_if; mii = device_get_softc(sc->sf_miibus); sf_stop(sc); sf_reset(sc); /* Init all the receive filter registers */ for (i = SF_RXFILT_PERFECT_BASE; i < (SF_RXFILT_HASH_MAX + 1); i += 4) csr_write_4(sc, i, 0); /* Empty stats counter registers. */ for (i = 0; i < sizeof(struct sf_stats)/sizeof(u_int32_t); i++) csr_write_4(sc, SF_STATS_BASE + (i + sizeof(u_int32_t)), 0); /* Init our MAC address */ csr_write_4(sc, SF_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0])); csr_write_4(sc, SF_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4])); sf_setperf(sc, 0, (caddr_t)&sc->arpcom.ac_enaddr); if (sf_init_rx_ring(sc) == ENOBUFS) { printf("sf%d: initialization failed: no " "memory for rx buffers\n", sc->sf_unit); SF_UNLOCK(sc); return; } sf_init_tx_ring(sc); csr_write_4(sc, SF_RXFILT, SF_PERFMODE_NORMAL|SF_HASHMODE_WITHVLAN); /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) { SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC); } else { SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_PROMISC); } if (ifp->if_flags & IFF_BROADCAST) { SF_SETBIT(sc, SF_RXFILT, SF_RXFILT_BROAD); } else { SF_CLRBIT(sc, SF_RXFILT, SF_RXFILT_BROAD); } /* * Load the multicast filter. */ sf_setmulti(sc); /* Init the completion queue indexes */ csr_write_4(sc, SF_CQ_CONSIDX, 0); csr_write_4(sc, SF_CQ_PRODIDX, 0); /* Init the RX completion queue */ csr_write_4(sc, SF_RXCQ_CTL_1, vtophys(sc->sf_ldata->sf_rx_clist) & SF_RXCQ_ADDR); SF_SETBIT(sc, SF_RXCQ_CTL_1, SF_RXCQTYPE_3); /* Init RX DMA control. */ SF_SETBIT(sc, SF_RXDMA_CTL, SF_RXDMA_REPORTBADPKTS); /* Init the RX buffer descriptor queue. */ csr_write_4(sc, SF_RXDQ_ADDR_Q1, vtophys(sc->sf_ldata->sf_rx_dlist_big)); csr_write_4(sc, SF_RXDQ_CTL_1, (MCLBYTES << 16) | SF_DESCSPACE_16BYTES); csr_write_4(sc, SF_RXDQ_PTR_Q1, SF_RX_DLIST_CNT - 1); /* Init the TX completion queue */ csr_write_4(sc, SF_TXCQ_CTL, vtophys(sc->sf_ldata->sf_tx_clist) & SF_RXCQ_ADDR); /* Init the TX buffer descriptor queue. */ csr_write_4(sc, SF_TXDQ_ADDR_HIPRIO, vtophys(sc->sf_ldata->sf_tx_dlist)); SF_SETBIT(sc, SF_TX_FRAMCTL, SF_TXFRMCTL_CPLAFTERTX); csr_write_4(sc, SF_TXDQ_CTL, SF_TXBUFDESC_TYPE0|SF_TXMINSPACE_128BYTES|SF_TXSKIPLEN_8BYTES); SF_SETBIT(sc, SF_TXDQ_CTL, SF_TXDQCTL_NODMACMP); /* Enable autopadding of short TX frames. */ SF_SETBIT(sc, SF_MACCFG_1, SF_MACCFG1_AUTOPAD); /* Enable interrupts. */ csr_write_4(sc, SF_IMR, SF_INTRS); SF_SETBIT(sc, SF_PCI_DEVCFG, SF_PCIDEVCFG_INTR_ENB); /* Enable the RX and TX engines. */ SF_SETBIT(sc, SF_GEN_ETH_CTL, SF_ETHCTL_RX_ENB|SF_ETHCTL_RXDMA_ENB); SF_SETBIT(sc, SF_GEN_ETH_CTL, SF_ETHCTL_TX_ENB|SF_ETHCTL_TXDMA_ENB); /*mii_mediachg(mii);*/ sf_ifmedia_upd(ifp); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; sc->sf_stat_ch = timeout(sf_stats_update, sc, hz); SF_UNLOCK(sc); return; } static int sf_encap(sc, c, m_head) struct sf_softc *sc; struct sf_tx_bufdesc_type0 *c; struct mbuf *m_head; { int frag = 0; struct sf_frag *f = NULL; struct mbuf *m; m = m_head; for (m = m_head, frag = 0; m != NULL; m = m->m_next) { if (m->m_len != 0) { if (frag == SF_MAXFRAGS) break; f = &c->sf_frags[frag]; if (frag == 0) f->sf_pktlen = m_head->m_pkthdr.len; f->sf_fraglen = m->m_len; f->sf_addr = vtophys(mtod(m, vm_offset_t)); frag++; } } if (m != NULL) { struct mbuf *m_new = NULL; MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) { printf("sf%d: no memory for tx list\n", sc->sf_unit); return(1); } if (m_head->m_pkthdr.len > MHLEN) { MCLGET(m_new, M_DONTWAIT); if (!(m_new->m_flags & M_EXT)) { m_freem(m_new); printf("sf%d: no memory for tx list\n", sc->sf_unit); return(1); } } m_copydata(m_head, 0, m_head->m_pkthdr.len, mtod(m_new, caddr_t)); m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len; m_freem(m_head); m_head = m_new; f = &c->sf_frags[0]; f->sf_fraglen = f->sf_pktlen = m_head->m_pkthdr.len; f->sf_addr = vtophys(mtod(m_head, caddr_t)); frag = 1; } c->sf_mbuf = m_head; c->sf_id = SF_TX_BUFDESC_ID; c->sf_fragcnt = frag; c->sf_intr = 1; c->sf_caltcp = 0; c->sf_crcen = 1; return(0); } static void sf_start(ifp) struct ifnet *ifp; { struct sf_softc *sc; struct sf_tx_bufdesc_type0 *cur_tx = NULL; struct mbuf *m_head = NULL; int i, txprod; sc = ifp->if_softc; SF_LOCK(sc); if (!sc->sf_link && ifp->if_snd.ifq_len < 10) { SF_UNLOCK(sc); return; } if (ifp->if_flags & IFF_OACTIVE) { SF_UNLOCK(sc); return; } txprod = csr_read_4(sc, SF_TXDQ_PRODIDX); i = SF_IDX_HI(txprod) >> 4; if (sc->sf_ldata->sf_tx_dlist[i].sf_mbuf != NULL) { printf("sf%d: TX ring full, resetting\n", sc->sf_unit); sf_init(sc); txprod = csr_read_4(sc, SF_TXDQ_PRODIDX); i = SF_IDX_HI(txprod) >> 4; } while(sc->sf_ldata->sf_tx_dlist[i].sf_mbuf == NULL) { if (sc->sf_tx_cnt >= (SF_TX_DLIST_CNT - 5)) { ifp->if_flags |= IFF_OACTIVE; cur_tx = NULL; break; } IF_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; cur_tx = &sc->sf_ldata->sf_tx_dlist[i]; if (sf_encap(sc, cur_tx, m_head)) { IF_PREPEND(&ifp->if_snd, m_head); ifp->if_flags |= IFF_OACTIVE; cur_tx = NULL; break; } /* * If there's a BPF listener, bounce a copy of this frame * to him. */ BPF_MTAP(ifp, m_head); SF_INC(i, SF_TX_DLIST_CNT); sc->sf_tx_cnt++; /* * Don't get the TX DMA queue get too full. */ if (sc->sf_tx_cnt > 64) break; } if (cur_tx == NULL) { SF_UNLOCK(sc); return; } /* Transmit */ csr_write_4(sc, SF_TXDQ_PRODIDX, (txprod & ~SF_TXDQ_PRODIDX_HIPRIO) | ((i << 20) & 0xFFFF0000)); ifp->if_timer = 5; SF_UNLOCK(sc); return; } static void sf_stop(sc) struct sf_softc *sc; { int i; struct ifnet *ifp; SF_LOCK(sc); ifp = &sc->arpcom.ac_if; untimeout(sf_stats_update, sc, sc->sf_stat_ch); csr_write_4(sc, SF_GEN_ETH_CTL, 0); csr_write_4(sc, SF_CQ_CONSIDX, 0); csr_write_4(sc, SF_CQ_PRODIDX, 0); csr_write_4(sc, SF_RXDQ_ADDR_Q1, 0); csr_write_4(sc, SF_RXDQ_CTL_1, 0); csr_write_4(sc, SF_RXDQ_PTR_Q1, 0); csr_write_4(sc, SF_TXCQ_CTL, 0); csr_write_4(sc, SF_TXDQ_ADDR_HIPRIO, 0); csr_write_4(sc, SF_TXDQ_CTL, 0); sf_reset(sc); sc->sf_link = 0; for (i = 0; i < SF_RX_DLIST_CNT; i++) { if (sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf != NULL) { m_freem(sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf); sc->sf_ldata->sf_rx_dlist_big[i].sf_mbuf = NULL; } } for (i = 0; i < SF_TX_DLIST_CNT; i++) { if (sc->sf_ldata->sf_tx_dlist[i].sf_mbuf != NULL) { m_freem(sc->sf_ldata->sf_tx_dlist[i].sf_mbuf); sc->sf_ldata->sf_tx_dlist[i].sf_mbuf = NULL; } } ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE); SF_UNLOCK(sc); return; } /* * Note: it is important that this function not be interrupted. We * use a two-stage register access scheme: if we are interrupted in * between setting the indirect address register and reading from the * indirect data register, the contents of the address register could * be changed out from under us. */ static void sf_stats_update(xsc) void *xsc; { struct sf_softc *sc; struct ifnet *ifp; struct mii_data *mii; struct sf_stats stats; u_int32_t *ptr; int i; sc = xsc; SF_LOCK(sc); ifp = &sc->arpcom.ac_if; mii = device_get_softc(sc->sf_miibus); ptr = (u_int32_t *)&stats; for (i = 0; i < sizeof(stats)/sizeof(u_int32_t); i++) ptr[i] = csr_read_4(sc, SF_STATS_BASE + (i + sizeof(u_int32_t))); for (i = 0; i < sizeof(stats)/sizeof(u_int32_t); i++) csr_write_4(sc, SF_STATS_BASE + (i + sizeof(u_int32_t)), 0); ifp->if_collisions += stats.sf_tx_single_colls + stats.sf_tx_multi_colls + stats.sf_tx_excess_colls; mii_tick(mii); if (!sc->sf_link && mii->mii_media_status & IFM_ACTIVE && IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { sc->sf_link++; if (ifp->if_snd.ifq_head != NULL) sf_start(ifp); } sc->sf_stat_ch = timeout(sf_stats_update, sc, hz); SF_UNLOCK(sc); return; } static void sf_watchdog(ifp) struct ifnet *ifp; { struct sf_softc *sc; sc = ifp->if_softc; SF_LOCK(sc); ifp->if_oerrors++; printf("sf%d: watchdog timeout\n", sc->sf_unit); sf_stop(sc); sf_reset(sc); sf_init(sc); if (ifp->if_snd.ifq_head != NULL) sf_start(ifp); SF_UNLOCK(sc); return; } static void sf_shutdown(dev) device_t dev; { struct sf_softc *sc; sc = device_get_softc(dev); sf_stop(sc); return; }