/*- * Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters. * * Copyright (c) 1997-2006 by Matthew Jacob * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Bug fixes gratefully acknowledged from: * Oded Kedem */ /* * Include header file appropriate for platform we're building on. */ #ifdef __NetBSD__ #include #endif #ifdef __FreeBSD__ #include __FBSDID("$FreeBSD$"); #include #endif #ifdef __OpenBSD__ #include #endif #ifdef __linux__ #include "isp_linux.h" #endif #ifdef ISP_TARGET_MODE static const char atiocope[] = "ATIO returned for lun %d because it was in the middle of Bus Device Reset " "on bus %d"; static const char atior[] = "ATIO returned on for lun %d on from IID %d because a Bus Reset occurred " "on bus %d"; static void isp_got_msg(ispsoftc_t *, in_entry_t *); static void isp_got_msg_fc(ispsoftc_t *, in_fcentry_t *); static void isp_handle_atio(ispsoftc_t *, at_entry_t *); static void isp_handle_atio2(ispsoftc_t *, at2_entry_t *); static void isp_handle_ctio(ispsoftc_t *, ct_entry_t *); static void isp_handle_ctio2(ispsoftc_t *, ct2_entry_t *); /* * The Qlogic driver gets an interrupt to look at response queue entries. * Some of these are status completions for initiatior mode commands, but * if target mode is enabled, we get a whole wad of response queue entries * to be handled here. * * Basically the split into 3 main groups: Lun Enable/Modification responses, * SCSI Command processing, and Immediate Notification events. * * You start by writing a request queue entry to enable target mode (and * establish some resource limitations which you can modify later). * The f/w responds with a LUN ENABLE or LUN MODIFY response with * the status of this action. If the enable was successful, you can expect... * * Response queue entries with SCSI commands encapsulate show up in an ATIO * (Accept Target IO) type- sometimes with enough info to stop the command at * this level. Ultimately the driver has to feed back to the f/w's request * queue a sequence of CTIOs (continue target I/O) that describe data to * be moved and/or status to be sent) and finally finishing with sending * to the f/w's response queue an ATIO which then completes the handshake * with the f/w for that command. There's a lot of variations on this theme, * including flags you can set in the CTIO for the Qlogic 2X00 fibre channel * cards that 'auto-replenish' the f/w's ATIO count, but this is the basic * gist of it. * * The third group that can show up in the response queue are Immediate * Notification events. These include things like notifications of SCSI bus * resets, or Bus Device Reset messages or other messages received. This * a classic oddbins area. It can get a little weird because you then turn * around and acknowledge the Immediate Notify by writing an entry onto the * request queue and then the f/w turns around and gives you an acknowledgement * to *your* acknowledgement on the response queue (the idea being to let * the f/w tell you when the event is *really* over I guess). * */ /* * A new response queue entry has arrived. The interrupt service code * has already swizzled it into the platform dependent from canonical form. * * Because of the way this driver is designed, unfortunately most of the * actual synchronization work has to be done in the platform specific * code- we have no synchroniation primitives in the common code. */ int isp_target_notify(ispsoftc_t *isp, void *vptr, uint16_t *optrp) { uint16_t status, seqid; union { at_entry_t *atiop; at2_entry_t *at2iop; at2e_entry_t *at2eiop; ct_entry_t *ctiop; ct2_entry_t *ct2iop; ct2e_entry_t *ct2eiop; lun_entry_t *lunenp; in_entry_t *inotp; in_fcentry_t *inot_fcp; in_fcentry_e_t *inote_fcp; na_entry_t *nackp; na_fcentry_t *nack_fcp; na_fcentry_e_t *nacke_fcp; isphdr_t *hp; void * *vp; #define atiop unp.atiop #define at2iop unp.at2iop #define at2eiop unp.at2eiop #define ctiop unp.ctiop #define ct2iop unp.ct2iop #define ct2eiop unp.ct2eiop #define lunenp unp.lunenp #define inotp unp.inotp #define inot_fcp unp.inot_fcp #define inote_fcp unp.inote_fcp #define nackp unp.nackp #define nack_fcp unp.nack_fcp #define nacke_fcp unp.nacke_fcp #define hdrp unp.hp } unp; uint8_t local[QENTRY_LEN]; int bus, type, rval = 1; type = isp_get_response_type(isp, (isphdr_t *)vptr); unp.vp = vptr; ISP_TDQE(isp, "isp_target_notify", (int) *optrp, vptr); switch(type) { case RQSTYPE_ATIO: isp_get_atio(isp, atiop, (at_entry_t *) local); isp_handle_atio(isp, (at_entry_t *) local); break; case RQSTYPE_CTIO: isp_get_ctio(isp, ctiop, (ct_entry_t *) local); isp_handle_ctio(isp, (ct_entry_t *) local); break; case RQSTYPE_ATIO2: if (IS_2KLOGIN(isp)) { isp_get_atio2e(isp, at2eiop, (at2e_entry_t *) local); } else { isp_get_atio2(isp, at2iop, (at2_entry_t *) local); } isp_handle_atio2(isp, (at2_entry_t *) local); break; case RQSTYPE_CTIO3: case RQSTYPE_CTIO2: if (IS_2KLOGIN(isp)) { isp_get_ctio2e(isp, ct2eiop, (ct2e_entry_t *) local); } else { isp_get_ctio2(isp, ct2iop, (ct2_entry_t *) local); } isp_handle_ctio2(isp, (ct2_entry_t *) local); break; case RQSTYPE_ENABLE_LUN: case RQSTYPE_MODIFY_LUN: isp_get_enable_lun(isp, lunenp, (lun_entry_t *) local); (void) isp_async(isp, ISPASYNC_TARGET_ACTION, local); break; case RQSTYPE_NOTIFY: /* * Either the ISP received a SCSI message it can't * handle, or it's returning an Immed. Notify entry * we sent. We can send Immed. Notify entries to * increment the firmware's resource count for them * (we set this initially in the Enable Lun entry). */ bus = 0; if (IS_FC(isp)) { if (IS_2KLOGIN(isp)) { isp_get_notify_fc_e(isp, inote_fcp, (in_fcentry_e_t *)local); } else { isp_get_notify_fc(isp, inot_fcp, (in_fcentry_t *)local); } inot_fcp = (in_fcentry_t *) local; status = inot_fcp->in_status; seqid = inot_fcp->in_seqid; } else { isp_get_notify(isp, inotp, (in_entry_t *)local); inotp = (in_entry_t *) local; status = inotp->in_status & 0xff; seqid = inotp->in_seqid; if (IS_DUALBUS(isp)) { bus = GET_BUS_VAL(inotp->in_iid); SET_BUS_VAL(inotp->in_iid, 0); } } isp_prt(isp, ISP_LOGTDEBUG0, "Immediate Notify On Bus %d, status=0x%x seqid=0x%x", bus, status, seqid); switch (status) { case IN_MSG_RECEIVED: case IN_IDE_RECEIVED: if (IS_FC(isp)) { isp_got_msg_fc(isp, (in_fcentry_t *)local); } else { isp_got_msg(isp, (in_entry_t *)local); } break; case IN_RSRC_UNAVAIL: isp_prt(isp, ISP_LOGWARN, "Firmware out of ATIOs"); isp_notify_ack(isp, local); break; case IN_RESET: (void) isp_target_async(isp, 0, ASYNC_BUS_RESET); break; case IN_PORT_LOGOUT: case IN_ABORT_TASK: case IN_PORT_CHANGED: case IN_GLOBAL_LOGO: (void) isp_async(isp, ISPASYNC_TARGET_ACTION, &local); break; default: isp_prt(isp, ISP_LOGERR, "bad status (0x%x) in isp_target_notify", status); isp_notify_ack(isp, local); break; } break; case RQSTYPE_NOTIFY_ACK: /* * The ISP is acknowledging our acknowledgement of an * Immediate Notify entry for some asynchronous event. */ if (IS_FC(isp)) { if (IS_2KLOGIN(isp)) { isp_get_notify_ack_fc_e(isp, nacke_fcp, (na_fcentry_e_t *)local); } else { isp_get_notify_ack_fc(isp, nack_fcp, (na_fcentry_t *)local); } nack_fcp = (na_fcentry_t *)local; isp_prt(isp, ISP_LOGTDEBUG1, "Notify Ack status=0x%x seqid 0x%x", nack_fcp->na_status, nack_fcp->na_seqid); } else { isp_get_notify_ack(isp, nackp, (na_entry_t *)local); nackp = (na_entry_t *)local; isp_prt(isp, ISP_LOGTDEBUG1, "Notify Ack event 0x%x status=0x%x seqid 0x%x", nackp->na_event, nackp->na_status, nackp->na_seqid); } break; default: isp_prt(isp, ISP_LOGERR, "Unknown entry type 0x%x in isp_target_notify", type); rval = 0; break; } #undef atiop #undef at2iop #undef at2eiop #undef ctiop #undef ct2iop #undef ct2eiop #undef lunenp #undef inotp #undef inot_fcp #undef inote_fcp #undef nackp #undef nack_fcp #undef nacke_fcp #undef hdrp return (rval); } /* * Toggle (on/off) target mode for bus/target/lun * * The caller has checked for overlap and legality. * * Note that not all of bus, target or lun can be paid attention to. * Note also that this action will not be complete until the f/w writes * response entry. The caller is responsible for synchronizing this. */ int isp_lun_cmd(ispsoftc_t *isp, int cmd, int bus, int tgt, int lun, int cmd_cnt, int inot_cnt, uint32_t opaque) { lun_entry_t el; uint16_t nxti, optr; void *outp; MEMZERO(&el, sizeof (el)); if (IS_DUALBUS(isp)) { el.le_rsvd = (bus & 0x1) << 7; } el.le_cmd_count = cmd_cnt; el.le_in_count = inot_cnt; if (cmd == RQSTYPE_ENABLE_LUN) { if (IS_SCSI(isp)) { el.le_flags = LUN_TQAE|LUN_DISAD; el.le_cdb6len = 12; el.le_cdb7len = 12; } } else if (cmd == -RQSTYPE_ENABLE_LUN) { cmd = RQSTYPE_ENABLE_LUN; el.le_cmd_count = 0; el.le_in_count = 0; } else if (cmd == -RQSTYPE_MODIFY_LUN) { cmd = RQSTYPE_MODIFY_LUN; el.le_ops = LUN_CCDECR | LUN_INDECR; } else { el.le_ops = LUN_CCINCR | LUN_ININCR; } el.le_header.rqs_entry_type = cmd; el.le_header.rqs_entry_count = 1; el.le_reserved = opaque; if (IS_SCSI(isp)) { el.le_tgt = tgt; el.le_lun = lun; } else if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) { el.le_lun = lun; } if (isp_getrqentry(isp, &nxti, &optr, &outp)) { isp_prt(isp, ISP_LOGERR, "Request Queue Overflow in isp_lun_cmd"); return (-1); } ISP_TDQE(isp, "isp_lun_cmd", (int) optr, &el); isp_put_enable_lun(isp, &el, outp); ISP_ADD_REQUEST(isp, nxti); return (0); } int isp_target_put_entry(ispsoftc_t *isp, void *ap) { void *outp; uint16_t nxti, optr; uint8_t etype = ((isphdr_t *) ap)->rqs_entry_type; if (isp_getrqentry(isp, &nxti, &optr, &outp)) { isp_prt(isp, ISP_LOGWARN, "Request Queue Overflow in isp_target_put_entry"); return (-1); } switch (etype) { case RQSTYPE_ATIO: isp_put_atio(isp, (at_entry_t *) ap, (at_entry_t *) outp); break; case RQSTYPE_ATIO2: if (IS_2KLOGIN(isp)) { isp_put_atio2e(isp, (at2e_entry_t *) ap, (at2e_entry_t *) outp); } else { isp_put_atio2(isp, (at2_entry_t *) ap, (at2_entry_t *) outp); } break; case RQSTYPE_CTIO: isp_put_ctio(isp, (ct_entry_t *) ap, (ct_entry_t *) outp); break; case RQSTYPE_CTIO2: if (IS_2KLOGIN(isp)) { isp_put_ctio2e(isp, (ct2e_entry_t *) ap, (ct2e_entry_t *) outp); } else { isp_put_ctio2(isp, (ct2_entry_t *) ap, (ct2_entry_t *) outp); } break; default: isp_prt(isp, ISP_LOGERR, "Unknown type 0x%x in isp_put_entry", etype); return (-1); } ISP_TDQE(isp, "isp_target_put_entry", (int) optr, ap); ISP_ADD_REQUEST(isp, nxti); return (0); } int isp_target_put_atio(ispsoftc_t *isp, void *arg) { union { at_entry_t _atio; at2_entry_t _atio2; at2e_entry_t _atio2e; } atun; MEMZERO(&atun, sizeof atun); if (IS_FC(isp)) { at2_entry_t *aep = arg; atun._atio2.at_header.rqs_entry_type = RQSTYPE_ATIO2; atun._atio2.at_header.rqs_entry_count = 1; if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) { atun._atio2.at_scclun = (uint16_t) aep->at_scclun; } else { atun._atio2.at_lun = (uint8_t) aep->at_lun; } if (IS_2KLOGIN(isp)) { atun._atio2e.at_iid = ((at2e_entry_t *)aep)->at_iid; } else { atun._atio2.at_iid = aep->at_iid; } atun._atio2.at_rxid = aep->at_rxid; atun._atio2.at_status = CT_OK; } else { at_entry_t *aep = arg; atun._atio.at_header.rqs_entry_type = RQSTYPE_ATIO; atun._atio.at_header.rqs_entry_count = 1; atun._atio.at_handle = aep->at_handle; atun._atio.at_iid = aep->at_iid; atun._atio.at_tgt = aep->at_tgt; atun._atio.at_lun = aep->at_lun; atun._atio.at_tag_type = aep->at_tag_type; atun._atio.at_tag_val = aep->at_tag_val; atun._atio.at_status = (aep->at_flags & AT_TQAE); atun._atio.at_status |= CT_OK; } return (isp_target_put_entry(isp, &atun)); } /* * Command completion- both for handling cases of no resources or * no blackhole driver, or other cases where we have to, inline, * finish the command sanely, or for normal command completion. * * The 'completion' code value has the scsi status byte in the low 8 bits. * If status is a CHECK CONDITION and bit 8 is nonzero, then bits 12..15 have * the sense key and bits 16..23 have the ASCQ and bits 24..31 have the ASC * values. * * NB: the key, asc, ascq, cannot be used for parallel SCSI as it doesn't * NB: inline SCSI sense reporting. As such, we lose this information. XXX. * * For both parallel && fibre channel, we use the feature that does * an automatic resource autoreplenish so we don't have then later do * put of an atio to replenish the f/w's resource count. */ int isp_endcmd(ispsoftc_t *isp, void *arg, uint32_t code, uint16_t hdl) { int sts; union { ct_entry_t _ctio; ct2_entry_t _ctio2; ct2e_entry_t _ctio2e; } un; MEMZERO(&un, sizeof un); sts = code & 0xff; if (IS_FC(isp)) { at2_entry_t *aep = arg; ct2_entry_t *cto = &un._ctio2; cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2; cto->ct_header.rqs_entry_count = 1; if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) { cto->ct_lun = aep->at_lun; } if (IS_2KLOGIN(isp)) { un._ctio2e.ct_iid = ((at2e_entry_t *)aep)->at_iid; } else { cto->ct_iid = aep->at_iid; } cto->ct_rxid = aep->at_rxid; cto->rsp.m1.ct_scsi_status = sts; cto->ct_flags = CT2_SENDSTATUS | CT2_NO_DATA | CT2_FLAG_MODE1; if (hdl == 0) { cto->ct_flags |= CT2_CCINCR; } if (aep->at_datalen) { cto->ct_resid = aep->at_datalen; cto->rsp.m1.ct_scsi_status |= CT2_DATA_UNDER; } if (sts == SCSI_CHECK && (code & ECMD_SVALID)) { cto->rsp.m1.ct_resp[0] = 0xf0; cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf; cto->rsp.m1.ct_resp[7] = 8; cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff; cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff; cto->rsp.m1.ct_senselen = 16; cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID; } cto->ct_syshandle = hdl; } else { at_entry_t *aep = arg; ct_entry_t *cto = &un._ctio; cto->ct_header.rqs_entry_type = RQSTYPE_CTIO; cto->ct_header.rqs_entry_count = 1; cto->ct_fwhandle = aep->at_handle; cto->ct_iid = aep->at_iid; cto->ct_tgt = aep->at_tgt; cto->ct_lun = aep->at_lun; cto->ct_tag_type = aep->at_tag_type; cto->ct_tag_val = aep->at_tag_val; if (aep->at_flags & AT_TQAE) { cto->ct_flags |= CT_TQAE; } cto->ct_flags = CT_SENDSTATUS | CT_NO_DATA; if (hdl == 0) { cto->ct_flags |= CT_CCINCR; } cto->ct_scsi_status = sts; cto->ct_syshandle = hdl; } return (isp_target_put_entry(isp, &un)); } /* * These are either broadcast events or specifically CTIO fast completion */ int isp_target_async(ispsoftc_t *isp, int bus, int event) { tmd_notify_t notify; MEMZERO(¬ify, sizeof (tmd_notify_t)); notify.nt_hba = isp; notify.nt_iid = INI_ANY; /* nt_tgt set in outer layers */ notify.nt_lun = LUN_ANY; notify.nt_tagval = TAG_ANY; if (IS_SCSI(isp)) { TAG_INSERT_BUS(notify.nt_tagval, bus); } switch (event) { case ASYNC_LOOP_UP: case ASYNC_PTPMODE: notify.nt_ncode = NT_LINK_UP; (void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify); break; case ASYNC_LOOP_DOWN: notify.nt_ncode = NT_LINK_DOWN; (void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify); break; case ASYNC_LIP_F8: case ASYNC_LIP_OCCURRED: case ASYNC_LOOP_RESET: notify.nt_ncode = NT_LIP_RESET; (void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify); break; case ASYNC_BUS_RESET: case ASYNC_TIMEOUT_RESET: /* XXX: where does this come from ? */ notify.nt_ncode = NT_BUS_RESET; (void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify); break; case ASYNC_DEVICE_RESET: notify.nt_ncode = NT_TARGET_RESET; (void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify); break; case ASYNC_CTIO_DONE: { uint8_t storage[QENTRY_LEN]; memset(storage, 0, QENTRY_LEN); if (IS_FC(isp)) { /* This should also suffice for 2K login code */ ct2_entry_t *ct = (ct2_entry_t *) storage; ct->ct_header.rqs_entry_type = RQSTYPE_CTIO2; ct->ct_status = CT_OK; ct->ct_syshandle = bus; ct->ct_flags = CT2_SENDSTATUS|CT2_FASTPOST; } else { ct_entry_t *ct = (ct_entry_t *) storage; ct->ct_header.rqs_entry_type = RQSTYPE_CTIO; ct->ct_status = CT_OK; ct->ct_fwhandle = bus; ct->ct_flags = CT_SENDSTATUS; } (void) isp_async(isp, ISPASYNC_TARGET_ACTION, storage); return (0); } default: isp_prt(isp, ISP_LOGERR, "isp_target_async: unknown event 0x%x", event); if (isp->isp_state == ISP_RUNSTATE) { isp_notify_ack(isp, NULL); } break; } return (0); } /* * Process a received message. * The ISP firmware can handle most messages, there are only * a few that we need to deal with: * - abort: clean up the current command * - abort tag and clear queue */ static void isp_got_msg(ispsoftc_t *isp, in_entry_t *inp) { tmd_notify_t nt; uint8_t status = inp->in_status & ~QLTM_SVALID; MEMZERO(&nt, sizeof (nt)); nt.nt_hba = isp; nt.nt_iid = GET_IID_VAL(inp->in_iid); nt.nt_tgt = inp->in_tgt; nt.nt_lun = inp->in_lun; IN_MAKE_TAGID(nt.nt_tagval, 0, inp); nt.nt_lreserved = inp; if (status == IN_IDE_RECEIVED || status == IN_MSG_RECEIVED) { switch (inp->in_msg[0]) { case MSG_ABORT: nt.nt_ncode = NT_ABORT_TASK_SET; break; case MSG_BUS_DEV_RESET: nt.nt_ncode = NT_TARGET_RESET; break; case MSG_ABORT_TAG: nt.nt_ncode = NT_ABORT_TASK; break; case MSG_CLEAR_QUEUE: nt.nt_ncode = NT_CLEAR_TASK_SET; break; case MSG_REL_RECOVERY: nt.nt_ncode = NT_CLEAR_ACA; break; case MSG_TERM_IO_PROC: nt.nt_ncode = NT_ABORT_TASK; break; case MSG_LUN_RESET: nt.nt_ncode = NT_LUN_RESET; break; default: isp_prt(isp, ISP_LOGERR, "unhandled message 0x%x", inp->in_msg[0]); isp_notify_ack(isp, inp); return; } (void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, &nt); } else { isp_prt(isp, ISP_LOGERR, "unknown immediate notify status 0x%x", inp->in_status); isp_notify_ack(isp, inp); } } /* * Synthesize a message from the task management flags in a FCP_CMND_IU. */ static void isp_got_msg_fc(ispsoftc_t *isp, in_fcentry_t *inp) { tmd_notify_t nt; static const char f1[] = "%s from iid 0x%08x%08x lun %d seq 0x%x"; static const char f2[] = "unknown %s 0x%x lun %d iid 0x%08x%08x task flags 0x%x seq 0x%x\n"; uint16_t seqid; MEMZERO(&nt, sizeof (tmd_notify_t)); nt.nt_hba = isp; if (IS_2KLOGIN(isp)) { nt.nt_iid = ((in_fcentry_e_t *)inp)->in_iid; seqid = ((in_fcentry_e_t *)inp)->in_seqid; } else { nt.nt_iid = inp->in_iid; seqid = inp->in_seqid; } /* nt_tgt set in outer layers */ if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) { nt.nt_lun = inp->in_scclun; } else { nt.nt_lun = inp->in_lun; } IN_FC_MAKE_TAGID(nt.nt_tagval, 0, seqid); nt.nt_lreserved = inp; if (inp->in_status != IN_MSG_RECEIVED) { isp_prt(isp, ISP_LOGINFO, f2, "immediate notify status", inp->in_status, nt.nt_lun, (uint32_t) (nt.nt_iid >> 32), (uint32_t) nt.nt_iid, inp->in_task_flags, inp->in_seqid); isp_notify_ack(isp, inp); return; } if (inp->in_task_flags & TASK_FLAGS_ABORT_TASK_SET) { isp_prt(isp, ISP_LOGINFO, f1, "ABORT TASK SET", (uint32_t) (nt.nt_iid >> 32), (uint32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid); nt.nt_ncode = NT_ABORT_TASK_SET; } else if (inp->in_task_flags & TASK_FLAGS_CLEAR_TASK_SET) { isp_prt(isp, ISP_LOGINFO, f1, "CLEAR TASK SET", (uint32_t) (nt.nt_iid >> 32), (uint32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid); nt.nt_ncode = NT_CLEAR_TASK_SET; } else if (inp->in_task_flags & TASK_FLAGS_LUN_RESET) { isp_prt(isp, ISP_LOGINFO, f1, "LUN RESET", (uint32_t) (nt.nt_iid >> 32), (uint32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid); nt.nt_ncode = NT_LUN_RESET; } else if (inp->in_task_flags & TASK_FLAGS_TARGET_RESET) { isp_prt(isp, ISP_LOGINFO, f1, "TARGET RESET", (uint32_t) (nt.nt_iid >> 32), (uint32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid); nt.nt_ncode = NT_TARGET_RESET; } else if (inp->in_task_flags & TASK_FLAGS_CLEAR_ACA) { isp_prt(isp, ISP_LOGINFO, f1, "CLEAR ACA", (uint32_t) (nt.nt_iid >> 32), (uint32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid); nt.nt_ncode = NT_CLEAR_ACA; } else { isp_prt(isp, ISP_LOGWARN, f2, "task flag", inp->in_status, nt.nt_lun, (uint32_t) (nt.nt_iid >> 32), (uint32_t) nt.nt_iid, inp->in_task_flags, inp->in_seqid); isp_notify_ack(isp, inp); return; } (void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, &nt); } void isp_notify_ack(ispsoftc_t *isp, void *arg) { char storage[QENTRY_LEN]; uint16_t nxti, optr; void *outp; if (isp_getrqentry(isp, &nxti, &optr, &outp)) { isp_prt(isp, ISP_LOGWARN, "Request Queue Overflow For isp_notify_ack"); return; } MEMZERO(storage, QENTRY_LEN); if (IS_FC(isp)) { na_fcentry_t *na = (na_fcentry_t *) storage; if (arg) { in_fcentry_t *inp = arg; MEMCPY(storage, arg, sizeof (isphdr_t)); if (IS_2KLOGIN(isp)) { ((na_fcentry_e_t *)na)->na_iid = ((in_fcentry_e_t *)inp)->in_iid; } else { na->na_iid = inp->in_iid; } if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) { na->na_lun = inp->in_scclun; } else { na->na_lun = inp->in_lun; } na->na_task_flags = inp->in_task_flags; na->na_seqid = inp->in_seqid; na->na_flags = NAFC_RCOUNT; na->na_status = inp->in_status; if (inp->in_status == IN_RESET) { na->na_flags |= NAFC_RST_CLRD; } } else { na->na_flags = NAFC_RST_CLRD; } na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK; na->na_header.rqs_entry_count = 1; if (IS_2KLOGIN(isp)) { isp_put_notify_ack_fc_e(isp, (na_fcentry_e_t *) na, (na_fcentry_e_t *)outp); } else { isp_put_notify_ack_fc(isp, na, (na_fcentry_t *)outp); } } else { na_entry_t *na = (na_entry_t *) storage; if (arg) { in_entry_t *inp = arg; MEMCPY(storage, arg, sizeof (isphdr_t)); na->na_iid = inp->in_iid; na->na_lun = inp->in_lun; na->na_tgt = inp->in_tgt; na->na_seqid = inp->in_seqid; if (inp->in_status == IN_RESET) { na->na_event = NA_RST_CLRD; } } else { na->na_event = NA_RST_CLRD; } na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK; na->na_header.rqs_entry_count = 1; isp_put_notify_ack(isp, na, (na_entry_t *)outp); } ISP_TDQE(isp, "isp_notify_ack", (int) optr, storage); ISP_ADD_REQUEST(isp, nxti); } static void isp_handle_atio(ispsoftc_t *isp, at_entry_t *aep) { int lun; lun = aep->at_lun; /* * The firmware status (except for the QLTM_SVALID bit) indicates * why this ATIO was sent to us. * * If QLTM_SVALID is set, the firware has recommended Sense Data. * * If the DISCONNECTS DISABLED bit is set in the flags field, * we're still connected on the SCSI bus - i.e. the initiator * did not set DiscPriv in the identify message. We don't care * about this so it's ignored. */ switch(aep->at_status & ~QLTM_SVALID) { case AT_PATH_INVALID: /* * ATIO rejected by the firmware due to disabled lun. */ isp_prt(isp, ISP_LOGERR, "rejected ATIO for disabled lun %d", lun); break; case AT_NOCAP: /* * Requested Capability not available * We sent an ATIO that overflowed the firmware's * command resource count. */ isp_prt(isp, ISP_LOGERR, "rejected ATIO for lun %d because of command count" " overflow", lun); break; case AT_BDR_MSG: /* * If we send an ATIO to the firmware to increment * its command resource count, and the firmware is * recovering from a Bus Device Reset, it returns * the ATIO with this status. We set the command * resource count in the Enable Lun entry and do * not increment it. Therefore we should never get * this status here. */ isp_prt(isp, ISP_LOGERR, atiocope, lun, GET_BUS_VAL(aep->at_iid)); break; case AT_CDB: /* Got a CDB */ case AT_PHASE_ERROR: /* Bus Phase Sequence Error */ /* * Punt to platform specific layer. */ (void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep); break; case AT_RESET: /* * A bus reset came along and blew away this command. Why * they do this in addition the async event code stuff, * I dunno. * * Ignore it because the async event will clear things * up for us. */ isp_prt(isp, ISP_LOGWARN, atior, lun, GET_IID_VAL(aep->at_iid), GET_BUS_VAL(aep->at_iid)); break; default: isp_prt(isp, ISP_LOGERR, "Unknown ATIO status 0x%x from initiator %d for lun %d", aep->at_status, aep->at_iid, lun); (void) isp_target_put_atio(isp, aep); break; } } static void isp_handle_atio2(ispsoftc_t *isp, at2_entry_t *aep) { int lun, iid; if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) { lun = aep->at_scclun; } else { lun = aep->at_lun; } if (IS_2KLOGIN(isp)) { iid = ((at2e_entry_t *)aep)->at_iid; } else { iid = aep->at_iid; } /* * The firmware status (except for the QLTM_SVALID bit) indicates * why this ATIO was sent to us. * * If QLTM_SVALID is set, the firware has recommended Sense Data. * * If the DISCONNECTS DISABLED bit is set in the flags field, * we're still connected on the SCSI bus - i.e. the initiator * did not set DiscPriv in the identify message. We don't care * about this so it's ignored. */ switch(aep->at_status & ~QLTM_SVALID) { case AT_PATH_INVALID: /* * ATIO rejected by the firmware due to disabled lun. */ isp_prt(isp, ISP_LOGERR, "rejected ATIO2 for disabled lun %d", lun); break; case AT_NOCAP: /* * Requested Capability not available * We sent an ATIO that overflowed the firmware's * command resource count. */ isp_prt(isp, ISP_LOGERR, "rejected ATIO2 for lun %d- command count overflow", lun); break; case AT_BDR_MSG: /* * If we send an ATIO to the firmware to increment * its command resource count, and the firmware is * recovering from a Bus Device Reset, it returns * the ATIO with this status. We set the command * resource count in the Enable Lun entry and no * not increment it. Therefore we should never get * this status here. */ isp_prt(isp, ISP_LOGERR, atiocope, lun, 0); break; case AT_CDB: /* Got a CDB */ /* * Punt to platform specific layer. */ (void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep); break; case AT_RESET: /* * A bus reset came along an blew away this command. Why * they do this in addition the async event code stuff, * I dunno. * * Ignore it because the async event will clear things * up for us. */ isp_prt(isp, ISP_LOGERR, atior, lun, iid, 0); break; default: isp_prt(isp, ISP_LOGERR, "Unknown ATIO2 status 0x%x from initiator %d for lun %d", aep->at_status, iid, lun); (void) isp_target_put_atio(isp, aep); break; } } static void isp_handle_ctio(ispsoftc_t *isp, ct_entry_t *ct) { void *xs; int pl = ISP_LOGTDEBUG2; char *fmsg = NULL; if (ct->ct_syshandle) { xs = isp_find_xs_tgt(isp, ct->ct_syshandle); if (xs == NULL) pl = ISP_LOGALL; } else { xs = NULL; } switch(ct->ct_status & ~QLTM_SVALID) { case CT_OK: /* * There are generally 3 possibilities as to why we'd get * this condition: * We disconnected after receiving a CDB. * We sent or received data. * We sent status & command complete. */ if (ct->ct_flags & CT_SENDSTATUS) { break; } else if ((ct->ct_flags & CT_DATAMASK) == CT_NO_DATA) { /* * Nothing to do in this case. */ isp_prt(isp, pl, "CTIO- iid %d disconnected OK", ct->ct_iid); return; } break; case CT_BDR_MSG: /* * Bus Device Reset message received or the SCSI Bus has * been Reset; the firmware has gone to Bus Free. * * The firmware generates an async mailbox interupt to * notify us of this and returns outstanding CTIOs with this * status. These CTIOs are handled in that same way as * CT_ABORTED ones, so just fall through here. */ fmsg = "Bus Device Reset"; /*FALLTHROUGH*/ case CT_RESET: if (fmsg == NULL) fmsg = "Bus Reset"; /*FALLTHROUGH*/ case CT_ABORTED: /* * When an Abort message is received the firmware goes to * Bus Free and returns all outstanding CTIOs with the status * set, then sends us an Immediate Notify entry. */ if (fmsg == NULL) fmsg = "ABORT TAG message sent by Initiator"; isp_prt(isp, ISP_LOGWARN, "CTIO destroyed by %s", fmsg); break; case CT_INVAL: /* * CTIO rejected by the firmware due to disabled lun. * "Cannot Happen". */ isp_prt(isp, ISP_LOGERR, "Firmware rejected CTIO for disabled lun %d", ct->ct_lun); break; case CT_NOPATH: /* * CTIO rejected by the firmware due "no path for the * nondisconnecting nexus specified". This means that * we tried to access the bus while a non-disconnecting * command is in process. */ isp_prt(isp, ISP_LOGERR, "Firmware rejected CTIO for bad nexus %d/%d/%d", ct->ct_iid, ct->ct_tgt, ct->ct_lun); break; case CT_RSELTMO: fmsg = "Reselection"; /*FALLTHROUGH*/ case CT_TIMEOUT: if (fmsg == NULL) fmsg = "Command"; isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg); break; case CT_PANIC: if (fmsg == NULL) fmsg = "Unrecoverable Error"; /*FALLTHROUGH*/ case CT_ERR: if (fmsg == NULL) fmsg = "Completed with Error"; /*FALLTHROUGH*/ case CT_PHASE_ERROR: if (fmsg == NULL) fmsg = "Phase Sequence Error"; /*FALLTHROUGH*/ case CT_TERMINATED: if (fmsg == NULL) fmsg = "terminated by TERMINATE TRANSFER"; /*FALLTHROUGH*/ case CT_NOACK: if (fmsg == NULL) fmsg = "unacknowledged Immediate Notify pending"; isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg); break; default: isp_prt(isp, ISP_LOGERR, "Unknown CTIO status 0x%x", ct->ct_status & ~QLTM_SVALID); break; } if (xs == NULL) { /* * There may be more than one CTIO for a data transfer, * or this may be a status CTIO we're not monitoring. * * The assumption is that they'll all be returned in the * order we got them. */ if (ct->ct_syshandle == 0) { if ((ct->ct_flags & CT_SENDSTATUS) == 0) { isp_prt(isp, pl, "intermediate CTIO completed ok"); } else { isp_prt(isp, pl, "unmonitored CTIO completed ok"); } } else { isp_prt(isp, pl, "NO xs for CTIO (handle 0x%x) status 0x%x", ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID); } } else { /* * Final CTIO completed. Release DMA resources and * notify platform dependent layers. */ if ((ct->ct_flags & CT_DATAMASK) != CT_NO_DATA) { ISP_DMAFREE(isp, xs, ct->ct_syshandle); } isp_prt(isp, pl, "final CTIO complete"); /* * The platform layer will destroy the handle if appropriate. */ (void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct); } } static void isp_handle_ctio2(ispsoftc_t *isp, ct2_entry_t *ct) { XS_T *xs; int pl = ISP_LOGTDEBUG2; char *fmsg = NULL; if (ct->ct_syshandle) { xs = isp_find_xs_tgt(isp, ct->ct_syshandle); if (xs == NULL) pl = ISP_LOGALL; } else { xs = NULL; } switch(ct->ct_status & ~QLTM_SVALID) { case CT_BUS_ERROR: isp_prt(isp, ISP_LOGERR, "PCI DMA Bus Error"); /* FALL Through */ case CT_DATA_OVER: case CT_DATA_UNDER: case CT_OK: /* * There are generally 2 possibilities as to why we'd get * this condition: * We sent or received data. * We sent status & command complete. */ break; case CT_BDR_MSG: /* * Target Reset function received. * * The firmware generates an async mailbox interupt to * notify us of this and returns outstanding CTIOs with this * status. These CTIOs are handled in that same way as * CT_ABORTED ones, so just fall through here. */ fmsg = "TARGET RESET Task Management Function Received"; /*FALLTHROUGH*/ case CT_RESET: if (fmsg == NULL) fmsg = "LIP Reset"; /*FALLTHROUGH*/ case CT_ABORTED: /* * When an Abort message is received the firmware goes to * Bus Free and returns all outstanding CTIOs with the status * set, then sends us an Immediate Notify entry. */ if (fmsg == NULL) fmsg = "ABORT Task Management Function Received"; isp_prt(isp, ISP_LOGERR, "CTIO2 destroyed by %s: RX_ID=0x%x", fmsg, ct->ct_rxid); break; case CT_INVAL: /* * CTIO rejected by the firmware - invalid data direction. */ isp_prt(isp, ISP_LOGERR, "CTIO2 had wrong data direction"); break; case CT_RSELTMO: fmsg = "failure to reconnect to initiator"; /*FALLTHROUGH*/ case CT_TIMEOUT: if (fmsg == NULL) fmsg = "command"; isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg); break; case CT_ERR: fmsg = "Completed with Error"; /*FALLTHROUGH*/ case CT_LOGOUT: if (fmsg == NULL) fmsg = "Port Logout"; /*FALLTHROUGH*/ case CT_PORTNOTAVAIL: if (fmsg == NULL) fmsg = "Port not available"; /*FALLTHROUGH*/ case CT_PORTCHANGED: if (fmsg == NULL) fmsg = "Port Changed"; /*FALLTHROUGH*/ case CT_NOACK: if (fmsg == NULL) fmsg = "unacknowledged Immediate Notify pending"; isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg); break; case CT_INVRXID: /* * CTIO rejected by the firmware because an invalid RX_ID. * Just print a message. */ isp_prt(isp, ISP_LOGERR, "CTIO2 completed with Invalid RX_ID 0x%x", ct->ct_rxid); break; default: isp_prt(isp, ISP_LOGERR, "Unknown CTIO2 status 0x%x", ct->ct_status & ~QLTM_SVALID); break; } if (xs == NULL) { /* * There may be more than one CTIO for a data transfer, * or this may be a status CTIO we're not monitoring. * * The assumption is that they'll all be returned in the * order we got them. */ if (ct->ct_syshandle == 0) { if ((ct->ct_flags & CT2_SENDSTATUS) == 0) { isp_prt(isp, pl, "intermediate CTIO completed ok"); } else { isp_prt(isp, pl, "unmonitored CTIO completed ok"); } } else { isp_prt(isp, pl, "NO xs for CTIO (handle 0x%x) status 0x%x", ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID); } } else { if ((ct->ct_flags & CT2_DATAMASK) != CT2_NO_DATA) { ISP_DMAFREE(isp, xs, ct->ct_syshandle); } if (ct->ct_flags & CT2_SENDSTATUS) { /* * Sent status and command complete. * * We're now really done with this command, so we * punt to the platform dependent layers because * only there can we do the appropriate command * complete thread synchronization. */ isp_prt(isp, pl, "status CTIO complete"); } else { /* * Final CTIO completed. Release DMA resources and * notify platform dependent layers. */ isp_prt(isp, pl, "data CTIO complete"); } (void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct); /* * The platform layer will destroy the handle if appropriate. */ } } #endif