/*- * Copyright (c) 1998 - 2004 Søren Schmidt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_ata.h" #include #include #include #include #include #include #include #include #include #include #include #include /* prototypes */ static int ata_generic_transaction(struct ata_request *); static void ata_generic_interrupt(void *); static void ata_generic_reset(struct ata_channel *); static int ata_wait(struct ata_device *, u_int8_t); /*static int ata_command(struct ata_device *, u_int8_t, u_int64_t, u_int16_t, u_int16_t);*/ static void ata_pio_read(struct ata_request *, int); static void ata_pio_write(struct ata_request *, int); /* local vars */ static int atadebug = 0; /* * low level ATA functions */ void ata_generic_hw(struct ata_channel *ch) { ch->hw.reset = ata_generic_reset; ch->hw.transaction = ata_generic_transaction; ch->hw.interrupt = ata_generic_interrupt; ch->hw.command = ata_generic_command; } /* must be called with ATA channel locked */ static int ata_generic_transaction(struct ata_request *request) { struct ata_channel *ch = request->device->channel; /* safetybelt for HW that went away */ if (!request->device->param || request->device->channel->flags&ATA_HWGONE) { request->retries = 0; request->result = ENXIO; return ATA_OP_FINISHED; } /* record the request as running */ ch->running = request; ATA_DEBUG_RQ(request, "transaction"); /* disable ATAPI DMA writes if HW doesn't support it */ if ((ch->flags & ATA_ATAPI_DMA_RO) && ((request->flags & (ATA_R_ATAPI | ATA_R_DMA | ATA_R_WRITE)) == (ATA_R_ATAPI | ATA_R_DMA | ATA_R_WRITE))) request->flags &= ~ATA_R_DMA; switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA)) { /* ATA PIO data transfer and control commands */ default: { /* record command direction here as our request might be gone later */ int write = (request->flags & ATA_R_WRITE); /* issue command */ if (ch->hw.command(request->device, request->u.ata.command, request->u.ata.lba, request->u.ata.count, request->u.ata.feature)) { ata_prtdev(request->device, "error issueing PIO command\n"); request->result = EIO; break; } /* if write command output the data */ if (write) { if (ata_wait(request->device, (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) < 0) { ata_prtdev(request->device,"timeout waiting for write DRQ"); request->result = EIO; break; } ata_pio_write(request, request->transfersize); } } /* return and wait for interrupt */ return ATA_OP_CONTINUES; /* ATA DMA data transfer commands */ case ATA_R_DMA: /* check sanity, setup SG list and DMA engine */ if (ch->dma->load(request->device, request->data, request->bytecount, request->flags & ATA_R_READ)) { ata_prtdev(request->device, "setting up DMA failed\n"); request->result = EIO; break; } /* issue command */ if (ch->hw.command(request->device, request->u.ata.command, request->u.ata.lba, request->u.ata.count, request->u.ata.feature)) { ata_prtdev(request->device, "error issuing DMA command\n"); request->result = EIO; break; } /* start DMA engine */ if (ch->dma->start(ch)) { ata_prtdev(request->device, "error starting DMA\n"); request->result = EIO; break; } /* return and wait for interrupt */ return ATA_OP_CONTINUES; /* ATAPI PIO commands */ case ATA_R_ATAPI: /* is this just a POLL DSC command ? */ if (request->u.atapi.ccb[0] == ATAPI_POLL_DSC) { ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | request->device->unit); DELAY(10); if (!(ATA_IDX_INB(ch, ATA_ALTSTAT)&ATA_S_DSC)) request->result = EBUSY; break; } /* start ATAPI operation */ if (ch->hw.command(request->device, ATA_PACKET_CMD, request->transfersize << 8, 0, 0)) { ata_prtdev(request->device, "error issuing ATA PACKET command\n"); request->result = EIO; break; } /* command interrupt device ? just return and wait for interrupt */ if ((request->device->param->config & ATA_DRQ_MASK) == ATA_DRQ_INTR) return ATA_OP_CONTINUES; /* wait for ready to write ATAPI command block */ { int timeout = 5000; /* might be less for fast devices */ while (timeout--) { int reason = ATA_IDX_INB(ch, ATA_IREASON); int status = ATA_IDX_INB(ch, ATA_STATUS); if (((reason & (ATA_I_CMD | ATA_I_IN)) | (status & (ATA_S_DRQ | ATA_S_BUSY))) == ATAPI_P_CMDOUT) break; DELAY(20); } if (timeout <= 0) { ata_prtdev(request->device, "timeout waiting for ATAPI ready\n"); request->result = EIO; break; } } /* this seems to be needed for some (slow) devices */ DELAY(10); /* output actual command block */ ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (int16_t *)request->u.atapi.ccb, (request->device->param->config & ATA_PROTO_MASK) == ATA_PROTO_ATAPI_12 ? 6 : 8); /* return and wait for interrupt */ return ATA_OP_CONTINUES; case ATA_R_ATAPI|ATA_R_DMA: /* is this just a POLL DSC command ? */ if (request->u.atapi.ccb[0] == ATAPI_POLL_DSC) { ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | request->device->unit); DELAY(10); if (!(ATA_IDX_INB(ch, ATA_ALTSTAT)&ATA_S_DSC)) request->result = EBUSY; break; } /* check sanity, setup SG list and DMA engine */ if (ch->dma->load(request->device, request->data, request->bytecount, request->flags & ATA_R_READ)) { ata_prtdev(request->device, "setting up DMA failed\n"); request->result = EIO; break; } /* start ATAPI operation */ if (ch->hw.command(request->device, ATA_PACKET_CMD, 0, 0, ATA_F_DMA)) { ata_prtdev(request->device, "error issuing ATAPI packet command\n"); request->result = EIO; break; } /* wait for ready to write ATAPI command block */ { int timeout = 5000; /* might be less for fast devices */ while (timeout--) { int reason = ATA_IDX_INB(ch, ATA_IREASON); int status = ATA_IDX_INB(ch, ATA_STATUS); if (((reason & (ATA_I_CMD | ATA_I_IN)) | (status & (ATA_S_DRQ | ATA_S_BUSY))) == ATAPI_P_CMDOUT) break; DELAY(20); } if (timeout <= 0) { ata_prtdev(request->device,"timeout waiting for ATAPI ready\n"); request->result = EIO; break; } } /* this seems to be needed for some (slow) devices */ DELAY(10); /* output actual command block */ ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (int16_t *)request->u.atapi.ccb, (request->device->param->config & ATA_PROTO_MASK) == ATA_PROTO_ATAPI_12 ? 6 : 8); /* start DMA engine */ if (ch->dma->start(ch)) { request->result = EIO; break; } /* return and wait for interrupt */ return ATA_OP_CONTINUES; } /* request finish here */ if (ch->dma->flags & ATA_DMA_ACTIVE) ch->dma->unload(ch); ch->running = NULL; return ATA_OP_FINISHED; } static void ata_generic_interrupt(void *data) { struct ata_channel *ch = (struct ata_channel *)data; struct ata_request *request = ch->running; int length; /* ignore this interrupt if there is no running request */ if (!request) return; ATA_DEBUG_RQ(request, "interrupt"); /* ignore interrupt if device is busy */ if (!(request->flags & ATA_R_TIMEOUT) && ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY) { DELAY(100); if (!(ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_DRQ)) return; } ATA_DEBUG_RQ(request, "interrupt accepted"); /* clear interrupt and get status */ request->status = ATA_IDX_INB(ch, ATA_STATUS); /* register interrupt */ if (!(request->flags & ATA_R_TIMEOUT)) request->flags |= ATA_R_INTR_SEEN; switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA | ATA_R_CONTROL)) { /* ATA PIO data transfer and control commands */ default: /* on control commands read back registers to the request struct */ if (request->flags & ATA_R_CONTROL) { request->u.ata.count = ATA_IDX_INB(ch, ATA_COUNT); request->u.ata.lba = ATA_IDX_INB(ch, ATA_SECTOR) | (ATA_IDX_INB(ch, ATA_CYL_LSB) << 8) | (ATA_IDX_INB(ch, ATA_CYL_MSB) << 16); } /* if we got an error we are done with the HW */ if (request->status & ATA_S_ERROR) { request->error = ATA_IDX_INB(ch, ATA_ERROR); break; } /* are we moving data ? */ if (request->flags & (ATA_R_READ | ATA_R_WRITE)) { /* if read data get it */ if (request->flags & ATA_R_READ) ata_pio_read(request, request->transfersize); /* update how far we've gotten */ request->donecount += request->transfersize; /* do we need a scoop more ? */ if (request->bytecount > request->donecount) { /* set this transfer size according to HW capabilities */ request->transfersize = min((request->bytecount - request->donecount), request->transfersize); /* clear interrupt seen flag as we need to wait again */ request->flags &= ~ATA_R_INTR_SEEN; /* if data write command, output the data */ if (request->flags & ATA_R_WRITE) { /* if we get an error here we are done with the HW */ if (ata_wait(request->device, (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) < 0) { ata_prtdev(request->device, "timeout waiting for write DRQ"); request->status = ATA_IDX_INB(ch, ATA_STATUS); break; } /* output data and return waiting for new interrupt */ ata_pio_write(request, request->transfersize); return; } /* if data read command, return & wait for interrupt */ if (request->flags & ATA_R_READ) return; } } /* done with HW */ break; /* ATA DMA data transfer commands */ case ATA_R_DMA: /* stop DMA engine and get status */ if (ch->dma->stop) request->dmastat = ch->dma->stop(ch); /* did we get error or data */ if (request->status & ATA_S_ERROR) request->error = ATA_IDX_INB(ch, ATA_ERROR); else if (request->dmastat & ATA_BMSTAT_ERROR) request->status |= ATA_S_ERROR; else request->donecount = request->bytecount; /* release SG list etc */ ch->dma->unload(ch); /* done with HW */ break; /* ATAPI PIO commands */ case ATA_R_ATAPI: length = ATA_IDX_INB(ch, ATA_CYL_LSB)|(ATA_IDX_INB(ch, ATA_CYL_MSB)<<8); switch ((ATA_IDX_INB(ch, ATA_IREASON) & (ATA_I_CMD | ATA_I_IN)) | (request->status & ATA_S_DRQ)) { case ATAPI_P_CMDOUT: /* this seems to be needed for some (slow) devices */ DELAY(10); if (!(request->status & ATA_S_DRQ)) { ata_prtdev(request->device, "command interrupt without DRQ\n"); request->status = ATA_S_ERROR; break; } ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (int16_t *)request->u.atapi.ccb, (request->device->param->config & ATA_PROTO_MASK)== ATA_PROTO_ATAPI_12 ? 6 : 8); /* return wait for interrupt */ return; case ATAPI_P_WRITE: if (request->flags & ATA_R_READ) { request->status = ATA_S_ERROR; ata_prtdev(request->device, "%s trying to write on read buffer\n", ata_cmd2str(request)); break; } ata_pio_write(request, length); request->donecount += length; /* set next transfer size according to HW capabilities */ request->transfersize = min((request->bytecount-request->donecount), request->transfersize); /* return wait for interrupt */ return; case ATAPI_P_READ: if (request->flags & ATA_R_WRITE) { request->status = ATA_S_ERROR; ata_prtdev(request->device, "%s trying to read on write buffer\n", ata_cmd2str(request)); break; } ata_pio_read(request, length); request->donecount += length; /* set next transfer size according to HW capabilities */ request->transfersize = min((request->bytecount-request->donecount), request->transfersize); /* return wait for interrupt */ return; case ATAPI_P_DONEDRQ: ata_prtdev(request->device, "WARNING - %s DONEDRQ non conformant device\n", ata_cmd2str(request)); if (request->flags & ATA_R_READ) { ata_pio_read(request, length); request->donecount += length; } else if (request->flags & ATA_R_WRITE) { ata_pio_write(request, length); request->donecount += length; } else request->status = ATA_S_ERROR; /* FALLTHROUGH */ case ATAPI_P_ABORT: case ATAPI_P_DONE: if (request->status & (ATA_S_ERROR | ATA_S_DWF)) request->error = ATA_IDX_INB(ch, ATA_ERROR); break; default: ata_prtdev(request->device, "unknown transfer phase\n"); request->status = ATA_S_ERROR; } /* done with HW */ break; /* ATAPI DMA commands */ case ATA_R_ATAPI|ATA_R_DMA: /* stop the engine and get engine status */ if (ch->dma->stop) request->dmastat = ch->dma->stop(ch); /* did we get error or data */ if (request->status & (ATA_S_ERROR | ATA_S_DWF)) request->error = ATA_IDX_INB(ch, ATA_ERROR); else if (request->dmastat & ATA_BMSTAT_ERROR) request->status |= ATA_S_ERROR; else request->donecount = request->bytecount; /* release SG list etc */ ch->dma->unload(ch); /* done with HW */ break; } /* if we timed out the unlocking of the ATA channel is done later */ if (!(request->flags & ATA_R_TIMEOUT)) { ch->running = NULL; ATA_UNLOCK_CH(ch); ch->locking(ch, ATA_LF_UNLOCK); } /* schedule completition for this request */ ata_finish(request); } /* must be called with ATA channel locked */ static void ata_generic_reset(struct ata_channel *ch) { u_int8_t err, lsb, msb, ostat0, ostat1; u_int8_t stat0 = 0, stat1 = 0; int mask = 0, timeout; /* reset host end of channel (if supported) */ if (ch->reset) ch->reset(ch); /* do we have any signs of ATA/ATAPI HW being present ? */ ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_MASTER); DELAY(10); ostat0 = ATA_IDX_INB(ch, ATA_STATUS); if ((ostat0 & 0xf8) != 0xf8 && ostat0 != 0xa5) { stat0 = ATA_S_BUSY; mask |= 0x01; } ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE); DELAY(10); ostat1 = ATA_IDX_INB(ch, ATA_STATUS); /* in some setups we dont want to test for a slave */ if (!(ch->flags & ATA_NO_SLAVE)) { if ((ostat1 & 0xf8) != 0xf8 && ostat1 != 0xa5) { stat1 = ATA_S_BUSY; mask |= 0x02; } } if (bootverbose) ata_printf(ch, -1, "reset tp1 mask=%02x ostat0=%02x ostat1=%02x\n", mask, ostat0, ostat1); /* if nothing showed up there is no need to get any further */ /* SOS is that too strong?, we just might loose devices here XXX */ ch->devices = 0; if (!mask) return; /* reset (both) devices on this channel */ ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_MASTER); DELAY(10); ATA_IDX_OUTB(ch, ATA_ALTSTAT, ATA_A_IDS | ATA_A_RESET); DELAY(10000); ATA_IDX_OUTB(ch, ATA_ALTSTAT, ATA_A_IDS); DELAY(100000); ATA_IDX_INB(ch, ATA_ERROR); /* wait for BUSY to go inactive */ for (timeout = 0; timeout < 310; timeout++) { if (stat0 & ATA_S_BUSY) { ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_MASTER); DELAY(10); err = ATA_IDX_INB(ch, ATA_ERROR); lsb = ATA_IDX_INB(ch, ATA_CYL_LSB); msb = ATA_IDX_INB(ch, ATA_CYL_MSB); stat0 = ATA_IDX_INB(ch, ATA_STATUS); if (bootverbose) ata_printf(ch, ATA_MASTER, "stat=0x%02x err=0x%02x lsb=0x%02x msb=0x%02x\n", stat0, err, lsb, msb); if (!(stat0 & ATA_S_BUSY)) { if ((err & 0x7f) == ATA_E_ILI) { if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB) { ch->devices |= ATA_ATAPI_MASTER; } else if (stat0 & ATA_S_READY) { ch->devices |= ATA_ATA_MASTER; } } else if ((stat0 & 0x4f) && err == lsb && err == msb) { stat0 |= ATA_S_BUSY; } } } if (!((mask == 0x03) && (stat0 & ATA_S_BUSY)) && (stat1 & ATA_S_BUSY)) { ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_SLAVE); DELAY(10); err = ATA_IDX_INB(ch, ATA_ERROR); lsb = ATA_IDX_INB(ch, ATA_CYL_LSB); msb = ATA_IDX_INB(ch, ATA_CYL_MSB); stat1 = ATA_IDX_INB(ch, ATA_STATUS); if (bootverbose) ata_printf(ch, ATA_SLAVE, " stat=0x%02x err=0x%02x lsb=0x%02x msb=0x%02x\n", stat1, err, lsb, msb); if (!(stat1 & ATA_S_BUSY)) { if ((err & 0x7f) == ATA_E_ILI) { if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB) { ch->devices |= ATA_ATAPI_SLAVE; } else if (stat1 & ATA_S_READY) { ch->devices |= ATA_ATA_SLAVE; } } else if ((stat1 & 0x4f) && err == lsb && err == msb) { stat1 |= ATA_S_BUSY; } } } if (mask == 0x01) /* wait for master only */ if (!(stat0 & ATA_S_BUSY) || (stat0 == 0xff && timeout > 5)) break; if (mask == 0x02) /* wait for slave only */ if (!(stat1 & ATA_S_BUSY) || (stat1 == 0xff && timeout > 5)) break; if (mask == 0x03) { /* wait for both master & slave */ if (!(stat0 & ATA_S_BUSY) && !(stat1 & ATA_S_BUSY)) break; if (stat0 == 0xff && timeout > 5) mask &= ~0x01; if (stat1 == 0xff && timeout > 5) mask &= ~0x02; } DELAY(100000); } if (bootverbose) ata_printf(ch, -1, "reset tp2 stat0=%02x stat1=%02x devices=0x%b\n", stat0, stat1, ch->devices, "\20\4ATAPI_SLAVE\3ATAPI_MASTER\2ATA_SLAVE\1ATA_MASTER"); } static int ata_wait(struct ata_device *atadev, u_int8_t mask) { u_int8_t status; int timeout = 0; DELAY(1); /* wait 5 seconds for device to get !BUSY */ while (timeout < 5000000) { status = ATA_IDX_INB(atadev->channel, ATA_STATUS); /* if drive fails status, reselect the drive just to be sure */ if (status == 0xff) { ata_prtdev(atadev, "WARNING no status, reselecting device\n"); ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | atadev->unit); DELAY(10); status = ATA_IDX_INB(atadev->channel, ATA_STATUS); if (status == 0xff) return -1; } /* are we done ? */ if (!(status & ATA_S_BUSY)) break; if (timeout > 1000) { timeout += 1000; DELAY(1000); } else { timeout += 10; DELAY(10); } } if (timeout >= 5000000) return -1; if (!mask) return (status & ATA_S_ERROR); DELAY(1); /* wait 50 msec for bits wanted */ timeout = 5000; while (timeout--) { status = ATA_IDX_INB(atadev->channel, ATA_STATUS); if ((status & mask) == mask) return (status & ATA_S_ERROR); DELAY (10); } return -1; } int ata_generic_command(struct ata_device *atadev, u_int8_t command, u_int64_t lba, u_int16_t count, u_int16_t feature) { if (atadebug) ata_prtdev(atadev, "ata_command: addr=%04lx, command=%02x, " "lba=%jd, count=%d, feature=%d\n", rman_get_start(atadev->channel->r_io[ATA_DATA].res), command, (intmax_t)lba, count, feature); /* select device */ ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | atadev->unit); /* ready to issue command ? */ if (ata_wait(atadev, 0) < 0) { ata_prtdev(atadev, "timeout sending command=%02x\n", command); return -1; } /* enable interrupt */ ATA_IDX_OUTB(atadev->channel, ATA_ALTSTAT, ATA_A_4BIT); /* only use 48bit addressing if needed (avoid bugs and overhead) */ if ((lba > 268435455 || count > 256) && atadev->param && atadev->param->support.command2 & ATA_SUPPORT_ADDRESS48) { /* translate command into 48bit version */ switch (command) { case ATA_READ: command = ATA_READ48; break; case ATA_READ_MUL: command = ATA_READ_MUL48; break; case ATA_READ_DMA: command = ATA_READ_DMA48; break; case ATA_READ_DMA_QUEUED: command = ATA_READ_DMA_QUEUED48; break; case ATA_WRITE: command = ATA_WRITE48; break; case ATA_WRITE_MUL: command = ATA_WRITE_MUL48; break; case ATA_WRITE_DMA: command = ATA_WRITE_DMA48; break; case ATA_WRITE_DMA_QUEUED: command = ATA_WRITE_DMA_QUEUED48; break; case ATA_FLUSHCACHE: command = ATA_FLUSHCACHE48; break; default: ata_prtdev(atadev, "can't translate cmd to 48bit version\n"); return -1; } ATA_IDX_OUTB(atadev->channel, ATA_FEATURE, (feature>>8) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_FEATURE, feature & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_COUNT, (count>>8) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_COUNT, count & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_SECTOR, (lba>>24) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_SECTOR, lba & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_CYL_LSB, (lba>>32) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_CYL_LSB, (lba>>8) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_CYL_MSB, (lba>>40) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_CYL_MSB, (lba>>16) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_LBA | atadev->unit); atadev->channel->flags |= ATA_48BIT_ACTIVE; } else { ATA_IDX_OUTB(atadev->channel, ATA_FEATURE, feature); ATA_IDX_OUTB(atadev->channel, ATA_COUNT, count); ATA_IDX_OUTB(atadev->channel, ATA_SECTOR, lba & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_CYL_LSB, (lba>>8) & 0xff); ATA_IDX_OUTB(atadev->channel, ATA_CYL_MSB, (lba>>16) & 0xff); if (atadev->flags & ATA_D_USE_CHS) ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | atadev->unit | ((lba>>24) & 0xf)); else ATA_IDX_OUTB(atadev->channel, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | atadev->unit|((lba>>24)&0xf)); atadev->channel->flags &= ~ATA_48BIT_ACTIVE; } /* issue command to controller */ ATA_IDX_OUTB(atadev->channel, ATA_CMD, command); return 0; } static void ata_pio_read(struct ata_request *request, int length) { int size = min(request->transfersize, length); struct ata_channel *ch = request->device->channel; int resid; if (ch->flags & ATA_USE_16BIT || (size % sizeof(int32_t))) ATA_IDX_INSW_STRM(ch, ATA_DATA, (void*)((uintptr_t)request->data+request->donecount), size / sizeof(int16_t)); else ATA_IDX_INSL_STRM(ch, ATA_DATA, (void*)((uintptr_t)request->data+request->donecount), size / sizeof(int32_t)); if (request->transfersize < length) { ata_prtdev(request->device, "WARNING - %s read data overrun %d>%d\n", ata_cmd2str(request), length, request->transfersize); for (resid = request->transfersize; resid < length; resid += sizeof(int16_t)) ATA_IDX_INW(ch, ATA_DATA); } } static void ata_pio_write(struct ata_request *request, int length) { int size = min(request->transfersize, length); struct ata_channel *ch = request->device->channel; int resid; if (ch->flags & ATA_USE_16BIT || (size % sizeof(int32_t))) ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (void*)((uintptr_t)request->data+request->donecount), size / sizeof(int16_t)); else ATA_IDX_OUTSL_STRM(ch, ATA_DATA, (void*)((uintptr_t)request->data+request->donecount), size / sizeof(int32_t)); if (request->transfersize < length) { ata_prtdev(request->device, "WARNING - %s write data underrun %d>%d\n", ata_cmd2str(request), length, request->transfersize); for (resid = request->transfersize; resid < length; resid += sizeof(int16_t)) ATA_IDX_OUTW(ch, ATA_DATA, 0); } }