/* $NetBSD: usb/uvscom.c,v 1.1 2002/03/19 15:08:42 augustss Exp $ */ /*- * Copyright (c) 2001-2002, Shunsuke Akiyama . * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include __FBSDID("$FreeBSD$"); /* * uvscom: SUNTAC Slipper U VS-10U driver. * Slipper U is a PC card to USB converter for data communication card * adapter. It supports DDI Pocket's Air H" C@rd, C@rd H" 64, NTT's P-in, * P-in m@ater and various data communication card adapters. */ #include "opt_uvscom.h" #include #include #include #include #include #include #include #include #include #if defined(__FreeBSD__) #include #include #if __FreeBSD_version >= 500014 #include #else #include #endif #else #include #include #endif #include #include #include #include #include #include #include #include "usbdevs.h" #include #include SYSCTL_NODE(_hw_usb, OID_AUTO, uvscom, CTLFLAG_RW, 0, "USB uvscom"); #ifdef USB_DEBUG static int uvscomdebug = 0; SYSCTL_INT(_hw_usb_uvscom, OID_AUTO, debug, CTLFLAG_RW, &uvscomdebug, 0, "uvscom debug level"); #define DPRINTFN(n, x) do { \ if (uvscomdebug > (n)) \ logprintf x; \ } while (0) #else #define DPRINTFN(n, x) #endif #define DPRINTF(x) DPRINTFN(0, x) #define UVSCOM_MODVER 1 /* module version */ #define UVSCOM_CONFIG_INDEX 0 #define UVSCOM_IFACE_INDEX 0 #ifndef UVSCOM_INTR_INTERVAL #define UVSCOM_INTR_INTERVAL 100 /* mS */ #endif #define UVSCOM_UNIT_WAIT 5 /* Request */ #define UVSCOM_SET_SPEED 0x10 #define UVSCOM_LINE_CTL 0x11 #define UVSCOM_SET_PARAM 0x12 #define UVSCOM_READ_STATUS 0xd0 #define UVSCOM_SHUTDOWN 0xe0 /* UVSCOM_SET_SPEED parameters */ #define UVSCOM_SPEED_150BPS 0x00 #define UVSCOM_SPEED_300BPS 0x01 #define UVSCOM_SPEED_600BPS 0x02 #define UVSCOM_SPEED_1200BPS 0x03 #define UVSCOM_SPEED_2400BPS 0x04 #define UVSCOM_SPEED_4800BPS 0x05 #define UVSCOM_SPEED_9600BPS 0x06 #define UVSCOM_SPEED_19200BPS 0x07 #define UVSCOM_SPEED_38400BPS 0x08 #define UVSCOM_SPEED_57600BPS 0x09 #define UVSCOM_SPEED_115200BPS 0x0a /* UVSCOM_LINE_CTL parameters */ #define UVSCOM_BREAK 0x40 #define UVSCOM_RTS 0x02 #define UVSCOM_DTR 0x01 #define UVSCOM_LINE_INIT 0x08 /* UVSCOM_SET_PARAM parameters */ #define UVSCOM_DATA_MASK 0x03 #define UVSCOM_DATA_BIT_8 0x03 #define UVSCOM_DATA_BIT_7 0x02 #define UVSCOM_DATA_BIT_6 0x01 #define UVSCOM_DATA_BIT_5 0x00 #define UVSCOM_STOP_MASK 0x04 #define UVSCOM_STOP_BIT_2 0x04 #define UVSCOM_STOP_BIT_1 0x00 #define UVSCOM_PARITY_MASK 0x18 #define UVSCOM_PARITY_EVEN 0x18 #if 0 #define UVSCOM_PARITY_UNK 0x10 #endif #define UVSCOM_PARITY_ODD 0x08 #define UVSCOM_PARITY_NONE 0x00 /* Status bits */ #define UVSCOM_TXRDY 0x04 #define UVSCOM_RXRDY 0x01 #define UVSCOM_DCD 0x08 #define UVSCOM_NOCARD 0x04 #define UVSCOM_DSR 0x02 #define UVSCOM_CTS 0x01 #define UVSCOM_USTAT_MASK (UVSCOM_NOCARD | UVSCOM_DSR | UVSCOM_CTS) struct uvscom_softc { struct ucom_softc sc_ucom; int sc_iface_number;/* interface number */ usbd_interface_handle sc_intr_iface; /* interrupt interface */ int sc_intr_number; /* interrupt number */ usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */ u_char *sc_intr_buf; /* interrupt buffer */ int sc_isize; u_char sc_dtr; /* current DTR state */ u_char sc_rts; /* current RTS state */ u_char sc_lsr; /* Local status register */ u_char sc_msr; /* uvscom status register */ uint16_t sc_lcr; /* Line control */ u_char sc_usr; /* unit status */ }; /* * These are the maximum number of bytes transferred per frame. * The output buffer size cannot be increased due to the size encoding. */ #define UVSCOMIBUFSIZE 512 #define UVSCOMOBUFSIZE 64 #ifndef UVSCOM_DEFAULT_OPKTSIZE #define UVSCOM_DEFAULT_OPKTSIZE 8 #endif Static usbd_status uvscom_shutdown(struct uvscom_softc *); Static usbd_status uvscom_reset(struct uvscom_softc *); Static usbd_status uvscom_set_line_coding(struct uvscom_softc *, uint16_t, uint16_t); Static usbd_status uvscom_set_line(struct uvscom_softc *, uint16_t); Static usbd_status uvscom_set_crtscts(struct uvscom_softc *); Static void uvscom_get_status(void *, int, u_char *, u_char *); Static void uvscom_dtr(struct uvscom_softc *, int); Static void uvscom_rts(struct uvscom_softc *, int); Static void uvscom_break(struct uvscom_softc *, int); Static void uvscom_set(void *, int, int, int); Static void uvscom_intr(usbd_xfer_handle, usbd_private_handle, usbd_status); #if TODO Static int uvscom_ioctl(void *, int, u_long, caddr_t, int, usb_proc_ptr); #endif Static int uvscom_param(void *, int, struct termios *); Static int uvscom_open(void *, int); Static void uvscom_close(void *, int); struct ucom_callback uvscom_callback = { uvscom_get_status, uvscom_set, uvscom_param, NULL, /* uvscom_ioctl, TODO */ uvscom_open, uvscom_close, NULL, NULL }; static const struct usb_devno uvscom_devs [] = { /* SUNTAC U-Cable type A4 */ { USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_AS144L4 }, /* SUNTAC U-Cable type D2 */ { USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_DS96L }, /* SUNTAC Ir-Trinity */ { USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_IS96U }, /* SUNTAC U-Cable type P1 */ { USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_PS64P1 }, /* SUNTAC Slipper U */ { USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_VS10U }, }; #define uvscom_lookup(v, p) usb_lookup(uvscom_devs, v, p) Static device_probe_t uvscom_match; Static device_attach_t uvscom_attach; Static device_detach_t uvscom_detach; Static device_method_t uvscom_methods[] = { /* Device interface */ DEVMETHOD(device_probe, uvscom_match), DEVMETHOD(device_attach, uvscom_attach), DEVMETHOD(device_detach, uvscom_detach), { 0, 0 } }; Static driver_t uvscom_driver = { "ucom", uvscom_methods, sizeof (struct uvscom_softc) }; DRIVER_MODULE(uvscom, uhub, uvscom_driver, ucom_devclass, usbd_driver_load, 0); MODULE_DEPEND(uvscom, usb, 1, 1, 1); MODULE_DEPEND(uvscom, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER); MODULE_VERSION(uvscom, UVSCOM_MODVER); static int uvscomobufsiz = UVSCOM_DEFAULT_OPKTSIZE; static int uvscominterval = UVSCOM_INTR_INTERVAL; static int sysctl_hw_usb_uvscom_opktsize(SYSCTL_HANDLER_ARGS) { int err, val; val = uvscomobufsiz; err = sysctl_handle_int(oidp, &val, sizeof(val), req); if (err != 0 || req->newptr == NULL) return (err); if (0 < val && val <= UVSCOMOBUFSIZE) uvscomobufsiz = val; else err = EINVAL; return (err); } static int sysctl_hw_usb_uvscom_interval(SYSCTL_HANDLER_ARGS) { int err, val; val = uvscominterval; err = sysctl_handle_int(oidp, &val, sizeof(val), req); if (err != 0 || req->newptr == NULL) return (err); if (0 < val && val <= 1000) uvscominterval = val; else err = EINVAL; return (err); } SYSCTL_PROC(_hw_usb_uvscom, OID_AUTO, opktsize, CTLTYPE_INT | CTLFLAG_RW, 0, sizeof(int), sysctl_hw_usb_uvscom_opktsize, "I", "uvscom output packet size"); SYSCTL_PROC(_hw_usb_uvscom, OID_AUTO, interval, CTLTYPE_INT | CTLFLAG_RW, 0, sizeof(int), sysctl_hw_usb_uvscom_interval, "I", "uvscom interrpt pipe interval"); USB_MATCH(uvscom) { USB_MATCH_START(uvscom, uaa); if (uaa->iface != NULL) return (UMATCH_NONE); return (uvscom_lookup(uaa->vendor, uaa->product) != NULL ? UMATCH_VENDOR_PRODUCT : UMATCH_NONE); } USB_ATTACH(uvscom) { USB_ATTACH_START(uvscom, sc, uaa); usbd_device_handle dev = uaa->device; struct ucom_softc *ucom; usb_config_descriptor_t *cdesc; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; char *devinfo; const char *devname; usbd_status err; int i; devinfo = malloc(1024, M_USBDEV, M_WAITOK); ucom = &sc->sc_ucom; bzero(sc, sizeof (struct uvscom_softc)); usbd_devinfo(dev, 0, devinfo); /* USB_ATTACH_SETUP; */ ucom->sc_dev = self; device_set_desc_copy(self, devinfo); /* USB_ATTACH_SETUP; */ ucom->sc_udev = dev; ucom->sc_iface = uaa->iface; devname = USBDEVNAME(ucom->sc_dev); printf("%s: %s\n", devname, devinfo); DPRINTF(("uvscom attach: sc = %p\n", sc)); /* initialize endpoints */ ucom->sc_bulkin_no = ucom->sc_bulkout_no = -1; sc->sc_intr_number = -1; sc->sc_intr_pipe = NULL; /* Move the device into the configured state. */ err = usbd_set_config_index(dev, UVSCOM_CONFIG_INDEX, 1); if (err) { printf("%s: failed to set configuration, err=%s\n", devname, usbd_errstr(err)); goto error; } /* get the config descriptor */ cdesc = usbd_get_config_descriptor(ucom->sc_udev); if (cdesc == NULL) { printf("%s: failed to get configuration descriptor\n", USBDEVNAME(ucom->sc_dev)); goto error; } /* get the common interface */ err = usbd_device2interface_handle(dev, UVSCOM_IFACE_INDEX, &ucom->sc_iface); if (err) { printf("%s: failed to get interface, err=%s\n", devname, usbd_errstr(err)); goto error; } id = usbd_get_interface_descriptor(ucom->sc_iface); sc->sc_iface_number = id->bInterfaceNumber; /* Find endpoints */ for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(ucom->sc_iface, i); if (ed == NULL) { printf("%s: no endpoint descriptor for %d\n", USBDEVNAME(ucom->sc_dev), i); goto error; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { ucom->sc_bulkin_no = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { ucom->sc_bulkout_no = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { sc->sc_intr_number = ed->bEndpointAddress; sc->sc_isize = UGETW(ed->wMaxPacketSize); } } if (ucom->sc_bulkin_no == -1) { printf("%s: Could not find data bulk in\n", USBDEVNAME(ucom->sc_dev)); goto error; } if (ucom->sc_bulkout_no == -1) { printf("%s: Could not find data bulk out\n", USBDEVNAME(ucom->sc_dev)); goto error; } if (sc->sc_intr_number == -1) { printf("%s: Could not find interrupt in\n", USBDEVNAME(ucom->sc_dev)); goto error; } sc->sc_dtr = sc->sc_rts = 0; sc->sc_lcr = UVSCOM_LINE_INIT; ucom->sc_parent = sc; ucom->sc_portno = UCOM_UNK_PORTNO; /* bulkin, bulkout set above */ ucom->sc_ibufsize = UVSCOMIBUFSIZE; ucom->sc_obufsize = uvscomobufsiz; ucom->sc_ibufsizepad = UVSCOMIBUFSIZE; ucom->sc_opkthdrlen = 0; ucom->sc_callback = &uvscom_callback; err = uvscom_reset(sc); if (err) { printf("%s: reset failed, %s\n", USBDEVNAME(ucom->sc_dev), usbd_errstr(err)); goto error; } DPRINTF(("uvscom: in = 0x%x out = 0x%x intr = 0x%x\n", ucom->sc_bulkin_no, ucom->sc_bulkout_no, sc->sc_intr_number)); ucom_attach(&sc->sc_ucom); free(devinfo, M_USBDEV); USB_ATTACH_SUCCESS_RETURN; error: ucom->sc_dying = 1; free(devinfo, M_USBDEV); USB_ATTACH_ERROR_RETURN; } USB_DETACH(uvscom) { USB_DETACH_START(uvscom, sc); int rv = 0; DPRINTF(("uvscom_detach: sc = %p\n", sc)); sc->sc_ucom.sc_dying = 1; if (sc->sc_intr_pipe != NULL) { usbd_abort_pipe(sc->sc_intr_pipe); usbd_close_pipe(sc->sc_intr_pipe); free(sc->sc_intr_buf, M_USBDEV); sc->sc_intr_pipe = NULL; } rv = ucom_detach(&sc->sc_ucom); return (rv); } Static usbd_status uvscom_readstat(struct uvscom_softc *sc) { usb_device_request_t req; usbd_status err; uint16_t r; DPRINTF(("%s: send readstat\n", USBDEVNAME(sc->sc_ucom.sc_dev))); req.bmRequestType = UT_READ_VENDOR_DEVICE; req.bRequest = UVSCOM_READ_STATUS; USETW(req.wValue, 0); USETW(req.wIndex, 0); USETW(req.wLength, 2); err = usbd_do_request(sc->sc_ucom.sc_udev, &req, &r); if (err) { printf("%s: uvscom_readstat: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err)); return (err); } DPRINTF(("%s: uvscom_readstat: r = %d\n", USBDEVNAME(sc->sc_ucom.sc_dev), r)); return (USBD_NORMAL_COMPLETION); } Static usbd_status uvscom_shutdown(struct uvscom_softc *sc) { usb_device_request_t req; usbd_status err; DPRINTF(("%s: send shutdown\n", USBDEVNAME(sc->sc_ucom.sc_dev))); req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = UVSCOM_SHUTDOWN; USETW(req.wValue, 0); USETW(req.wIndex, 0); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_ucom.sc_udev, &req, NULL); if (err) { printf("%s: uvscom_shutdown: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err)); return (err); } return (USBD_NORMAL_COMPLETION); } Static usbd_status uvscom_reset(struct uvscom_softc *sc) { DPRINTF(("%s: uvscom_reset\n", USBDEVNAME(sc->sc_ucom.sc_dev))); return (USBD_NORMAL_COMPLETION); } Static usbd_status uvscom_set_crtscts(struct uvscom_softc *sc) { DPRINTF(("%s: uvscom_set_crtscts\n", USBDEVNAME(sc->sc_ucom.sc_dev))); return (USBD_NORMAL_COMPLETION); } Static usbd_status uvscom_set_line(struct uvscom_softc *sc, uint16_t line) { usb_device_request_t req; usbd_status err; DPRINTF(("%s: uvscom_set_line: %04x\n", USBDEVNAME(sc->sc_ucom.sc_dev), line)); req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = UVSCOM_LINE_CTL; USETW(req.wValue, line); USETW(req.wIndex, 0); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_ucom.sc_udev, &req, NULL); if (err) { printf("%s: uvscom_set_line: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err)); return (err); } return (USBD_NORMAL_COMPLETION); } Static usbd_status uvscom_set_line_coding(struct uvscom_softc *sc, uint16_t lsp, uint16_t ls) { usb_device_request_t req; usbd_status err; DPRINTF(("%s: uvscom_set_line_coding: %02x %02x\n", USBDEVNAME(sc->sc_ucom.sc_dev), lsp, ls)); req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = UVSCOM_SET_SPEED; USETW(req.wValue, lsp); USETW(req.wIndex, 0); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_ucom.sc_udev, &req, NULL); if (err) { printf("%s: uvscom_set_line_coding: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err)); return (err); } req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = UVSCOM_SET_PARAM; USETW(req.wValue, ls); USETW(req.wIndex, 0); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_ucom.sc_udev, &req, NULL); if (err) { printf("%s: uvscom_set_line_coding: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err)); return (err); } return (USBD_NORMAL_COMPLETION); } Static void uvscom_dtr(struct uvscom_softc *sc, int onoff) { DPRINTF(("%s: uvscom_dtr: onoff = %d\n", USBDEVNAME(sc->sc_ucom.sc_dev), onoff)); if (sc->sc_dtr == onoff) return; /* no change */ sc->sc_dtr = onoff; if (onoff) SET(sc->sc_lcr, UVSCOM_DTR); else CLR(sc->sc_lcr, UVSCOM_DTR); uvscom_set_line(sc, sc->sc_lcr); } Static void uvscom_rts(struct uvscom_softc *sc, int onoff) { DPRINTF(("%s: uvscom_rts: onoff = %d\n", USBDEVNAME(sc->sc_ucom.sc_dev), onoff)); if (sc->sc_rts == onoff) return; /* no change */ sc->sc_rts = onoff; if (onoff) SET(sc->sc_lcr, UVSCOM_RTS); else CLR(sc->sc_lcr, UVSCOM_RTS); uvscom_set_line(sc, sc->sc_lcr); } Static void uvscom_break(struct uvscom_softc *sc, int onoff) { DPRINTF(("%s: uvscom_break: onoff = %d\n", USBDEVNAME(sc->sc_ucom.sc_dev), onoff)); if (onoff) uvscom_set_line(sc, SET(sc->sc_lcr, UVSCOM_BREAK)); } Static void uvscom_set(void *addr, int portno, int reg, int onoff) { struct uvscom_softc *sc = addr; switch (reg) { case UCOM_SET_DTR: uvscom_dtr(sc, onoff); break; case UCOM_SET_RTS: uvscom_rts(sc, onoff); break; case UCOM_SET_BREAK: uvscom_break(sc, onoff); break; default: break; } } Static int uvscom_param(void *addr, int portno, struct termios *t) { struct uvscom_softc *sc = addr; usbd_status err; uint16_t lsp; uint16_t ls; DPRINTF(("%s: uvscom_param: sc = %p\n", USBDEVNAME(sc->sc_ucom.sc_dev), sc)); ls = 0; switch (t->c_ospeed) { case B150: lsp = UVSCOM_SPEED_150BPS; break; case B300: lsp = UVSCOM_SPEED_300BPS; break; case B600: lsp = UVSCOM_SPEED_600BPS; break; case B1200: lsp = UVSCOM_SPEED_1200BPS; break; case B2400: lsp = UVSCOM_SPEED_2400BPS; break; case B4800: lsp = UVSCOM_SPEED_4800BPS; break; case B9600: lsp = UVSCOM_SPEED_9600BPS; break; case B19200: lsp = UVSCOM_SPEED_19200BPS; break; case B38400: lsp = UVSCOM_SPEED_38400BPS; break; case B57600: lsp = UVSCOM_SPEED_57600BPS; break; case B115200: lsp = UVSCOM_SPEED_115200BPS; break; default: return (EIO); } if (ISSET(t->c_cflag, CSTOPB)) SET(ls, UVSCOM_STOP_BIT_2); else SET(ls, UVSCOM_STOP_BIT_1); if (ISSET(t->c_cflag, PARENB)) { if (ISSET(t->c_cflag, PARODD)) SET(ls, UVSCOM_PARITY_ODD); else SET(ls, UVSCOM_PARITY_EVEN); } else SET(ls, UVSCOM_PARITY_NONE); switch (ISSET(t->c_cflag, CSIZE)) { case CS5: SET(ls, UVSCOM_DATA_BIT_5); break; case CS6: SET(ls, UVSCOM_DATA_BIT_6); break; case CS7: SET(ls, UVSCOM_DATA_BIT_7); break; case CS8: SET(ls, UVSCOM_DATA_BIT_8); break; default: return (EIO); } err = uvscom_set_line_coding(sc, lsp, ls); if (err) return (EIO); if (ISSET(t->c_cflag, CRTSCTS)) { err = uvscom_set_crtscts(sc); if (err) return (EIO); } return (0); } Static int uvscom_open(void *addr, int portno) { struct uvscom_softc *sc = addr; int err; int i; if (sc->sc_ucom.sc_dying) return (ENXIO); DPRINTF(("uvscom_open: sc = %p\n", sc)); /* change output packet size */ sc->sc_ucom.sc_obufsize = uvscomobufsiz; if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { DPRINTF(("uvscom_open: open interrupt pipe.\n")); sc->sc_usr = 0; /* clear unit status */ err = uvscom_readstat(sc); if (err) { DPRINTF(("%s: uvscom_open: readstat faild\n", USBDEVNAME(sc->sc_ucom.sc_dev))); return (ENXIO); } sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK); err = usbd_open_pipe_intr(sc->sc_ucom.sc_iface, sc->sc_intr_number, USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, sc->sc_intr_buf, sc->sc_isize, uvscom_intr, uvscominterval); if (err) { printf("%s: cannot open interrupt pipe (addr %d)\n", USBDEVNAME(sc->sc_ucom.sc_dev), sc->sc_intr_number); return (ENXIO); } } else { DPRINTF(("uvscom_open: did not open interrupt pipe.\n")); } if ((sc->sc_usr & UVSCOM_USTAT_MASK) == 0) { /* unit is not ready */ for (i = UVSCOM_UNIT_WAIT; i > 0; --i) { tsleep(&err, TTIPRI, "uvsop", hz); /* XXX */ if (ISSET(sc->sc_usr, UVSCOM_USTAT_MASK)) break; } if (i == 0) { DPRINTF(("%s: unit is not ready\n", USBDEVNAME(sc->sc_ucom.sc_dev))); return (ENXIO); } /* check PC card was inserted */ if (ISSET(sc->sc_usr, UVSCOM_NOCARD)) { DPRINTF(("%s: no card\n", USBDEVNAME(sc->sc_ucom.sc_dev))); return (ENXIO); } } return (0); } Static void uvscom_close(void *addr, int portno) { struct uvscom_softc *sc = addr; int err; if (sc->sc_ucom.sc_dying) return; DPRINTF(("uvscom_close: close\n")); uvscom_shutdown(sc); if (sc->sc_intr_pipe != NULL) { err = usbd_abort_pipe(sc->sc_intr_pipe); if (err) printf("%s: abort interrupt pipe failed: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err)); err = usbd_close_pipe(sc->sc_intr_pipe); if (err) printf("%s: close interrupt pipe failed: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err)); free(sc->sc_intr_buf, M_USBDEV); sc->sc_intr_pipe = NULL; } } Static void uvscom_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) { struct uvscom_softc *sc = priv; u_char *buf = sc->sc_intr_buf; u_char pstatus; if (sc->sc_ucom.sc_dying) return; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) return; printf("%s: uvscom_intr: abnormal status: %s\n", USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(status)); usbd_clear_endpoint_stall_async(sc->sc_intr_pipe); return; } DPRINTFN(2, ("%s: uvscom status = %02x %02x\n", USBDEVNAME(sc->sc_ucom.sc_dev), buf[0], buf[1])); sc->sc_lsr = sc->sc_msr = 0; sc->sc_usr = buf[1]; pstatus = buf[0]; if (ISSET(pstatus, UVSCOM_TXRDY)) SET(sc->sc_lsr, ULSR_TXRDY); if (ISSET(pstatus, UVSCOM_RXRDY)) SET(sc->sc_lsr, ULSR_RXRDY); pstatus = buf[1]; if (ISSET(pstatus, UVSCOM_CTS)) SET(sc->sc_msr, UMSR_CTS); if (ISSET(pstatus, UVSCOM_DSR)) SET(sc->sc_msr, UMSR_DSR); if (ISSET(pstatus, UVSCOM_DCD)) SET(sc->sc_msr, UMSR_DCD); ucom_status_change(&sc->sc_ucom); } Static void uvscom_get_status(void *addr, int portno, u_char *lsr, u_char *msr) { struct uvscom_softc *sc = addr; if (lsr != NULL) *lsr = sc->sc_lsr; if (msr != NULL) *msr = sc->sc_msr; } #if TODO Static int uvscom_ioctl(void *addr, int portno, u_long cmd, caddr_t data, int flag, usb_proc_ptr p) { struct uvscom_softc *sc = addr; int error = 0; if (sc->sc_ucom.sc_dying) return (EIO); DPRINTF(("uvscom_ioctl: cmd = 0x%08lx\n", cmd)); switch (cmd) { case TIOCNOTTY: case TIOCMGET: case TIOCMSET: break; default: DPRINTF(("uvscom_ioctl: unknown\n")); error = ENOTTY; break; } return (error); } #endif