#!/bin/sh # # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. # # All arguments must be in double or single quotes. # # $Id: rc.conf,v 1.4 1997/04/28 10:07:21 jkh Exp $ ############################################################## ### Important initial Boot-time options ##################### ############################################################## swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES if you want APM enabled. pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network options: ### hostname="myname.my.domain" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). firewall="NO" # Set to firewall type or NO for none. tcp_extentions="YES" # Allow RFC1323 & RFC1544 extentions (or NO). network_interfaces="lo0" # List of network interfaces (lo0 is loopback). ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. ### Network daemon (miscellaneous) & NFS options: ### syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_flags="" # Flags to syslogd (if enabled). named_enable="NO" # Run named, the DNS server (or NO). named_flags="" # Flags to named (if enabled). kerberos_server_enable="NO" # Run a kerberos master server (or NO). rwhod_enable="NO" # Run the rwho daemon (or NO). amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_server_enable="NO" # This host is an NFS server (or NO). weak_mountd_authentication="NO" # Running PCNFSD / other non-root nfsd (or NO). nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). portmap_enable="YES" # Run the portmapper service (or NO). portmap_flags="" # Flags to portmap (if enabled). xtend_enable="NO" # Run the X-10 power controller daemon. xtend_flags="" # Flags to xtend (if enabled). ### Network Time Services options: ### timed_enabled="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). ntpdate_flags="" # Flags to ntpdate (if enabled). xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). xntpd_flags="" # Flags to xntpd (if enabled). tickadj_enable="YES" # If xntp is enabled, also run tickadj. tickadj_flags="-Aq" # Flags to tickadj (if enabled). # Network Information Services (NIS) options: ### nis_client_enable="NO" # We're an NIS client (or NO) nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO) nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswd_enable="NO" # Run rpc.yppasswd at boot time (or NO). nis_yppasswd_flags="" # Flags to rpc.yppasswd (if enabled). ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. router_enable="YES" # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf) ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. ############################################################## ### System console options ################################# ############################################################## keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # bell to duration.pitch or normal or visual (or NO). keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="NO" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver desired: blank/green/snake/star/NO. mousedtype="NO" # See man page for rc.conf(8) for available settings. mousedport="/dev/cuaa0" # Set to your mouse port (required if mousetype set) mousedflags="" # Any additional flags to moused. ############################################################## ### Miscellaneous administrative options ################### ############################################################## lpd_enable="YES" # Run the line printer daemon sendmail_enable="YES" # Run the sendmail daemon (or NO). sendmail_flags="-bd -q30m" # -bd is pretty mandatory savecore_enable="NO" # Save kernel crashdumps for debugging (or NO). dumpdev="NO" # Device name to crashdump to (if enabled). check_quotas="NO" # Check quotas (or NO). accounting="NO" # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). linux_enable="NO" # Linux emulation loaded at startup (or NO). rand_irqs="NO" # Stir the entropy pool (or NO).