/*- * Copyright (c) 2003-2007 Tim Kientzle * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "archive_platform.h" __FBSDID("$FreeBSD$"); #ifdef HAVE_ERRNO_H #include #endif #include #ifdef HAVE_STDLIB_H #include #endif #ifdef HAVE_STRING_H #include #endif #ifdef HAVE_UNISTD_H #include #endif #ifdef HAVE_BZLIB_H #include #endif #include "archive.h" #include "archive_private.h" #include "archive_read_private.h" #if HAVE_BZLIB_H struct private_data { bz_stream stream; char *uncompressed_buffer; size_t uncompressed_buffer_size; char *read_next; int64_t total_out; }; static int finish(struct archive_read *); static ssize_t read_ahead(struct archive_read *, const void **, size_t); static ssize_t read_consume(struct archive_read *, size_t); static int drive_decompressor(struct archive_read *a, struct private_data *); #endif /* These two functions are defined even if we lack bzlib. See below. */ static int bid(const void *, size_t); static int init(struct archive_read *, const void *, size_t); int archive_read_support_compression_bzip2(struct archive *_a) { struct archive_read *a = (struct archive_read *)_a; return (__archive_read_register_compression(a, bid, init)); } /* * Test whether we can handle this data. * * This logic returns zero if any part of the signature fails. It * also tries to Do The Right Thing if a very short buffer prevents us * from verifying as much as we would like. */ static int bid(const void *buff, size_t len) { const unsigned char *buffer; int bits_checked; if (len < 1) return (0); buffer = (const unsigned char *)buff; bits_checked = 0; if (buffer[0] != 'B') /* Verify first ID byte. */ return (0); bits_checked += 8; if (len < 2) return (bits_checked); if (buffer[1] != 'Z') /* Verify second ID byte. */ return (0); bits_checked += 8; if (len < 3) return (bits_checked); if (buffer[2] != 'h') /* Verify third ID byte. */ return (0); bits_checked += 8; if (len < 4) return (bits_checked); if (buffer[3] < '1' || buffer[3] > '9') return (0); bits_checked += 5; /* * Research Question: Can we do any more to verify that this * really is BZip2 format?? For 99.9% of the time, the above * test is sufficient, but it would be nice to do a more * thorough check. It's especially troubling that the BZip2 * signature begins with all ASCII characters; a tar archive * whose first filename begins with 'BZh3' would potentially * fool this logic. (It may also be possible to guard against * such anomalies in archive_read_support_compression_none.) */ return (bits_checked); } #ifndef HAVE_BZLIB_H /* * If we don't have bzlib on this system, we can't actually do the * decompression. We can, however, still detect bzip2-compressed * archives and emit a useful message. */ static int init(struct archive *a, const void *buff, size_t n) { (void)a; /* UNUSED */ (void)buff; /* UNUSED */ (void)n; /* UNUSED */ archive_set_error(a, -1, "This version of libarchive was compiled without bzip2 support"); return (ARCHIVE_FATAL); } #else /* * Setup the callbacks. */ static int init(struct archive_read *a, const void *buff, size_t n) { struct private_data *state; int ret; a->archive.compression_code = ARCHIVE_COMPRESSION_BZIP2; a->archive.compression_name = "bzip2"; state = (struct private_data *)malloc(sizeof(*state)); if (state == NULL) { archive_set_error(&a->archive, ENOMEM, "Can't allocate data for %s decompression", a->archive.compression_name); return (ARCHIVE_FATAL); } memset(state, 0, sizeof(*state)); state->uncompressed_buffer_size = 64 * 1024; state->uncompressed_buffer = (char *)malloc(state->uncompressed_buffer_size); state->stream.next_out = state->uncompressed_buffer; state->read_next = state->uncompressed_buffer; state->stream.avail_out = state->uncompressed_buffer_size; if (state->uncompressed_buffer == NULL) { archive_set_error(&a->archive, ENOMEM, "Can't allocate %s decompression buffers", a->archive.compression_name); free(state); return (ARCHIVE_FATAL); } /* * A bug in bzlib.h: stream.next_in should be marked 'const' * but isn't (the library never alters data through the * next_in pointer, only reads it). The result: this ugly * cast to remove 'const'. */ state->stream.next_in = (char *)(uintptr_t)(const void *)buff; state->stream.avail_in = n; a->compression_read_ahead = read_ahead; a->compression_read_consume = read_consume; a->compression_skip = NULL; /* not supported */ a->compression_finish = finish; /* Initialize compression library. */ ret = BZ2_bzDecompressInit(&(state->stream), 0 /* library verbosity */, 0 /* don't use slow low-mem algorithm */); /* If init fails, try using low-memory algorithm instead. */ if (ret == BZ_MEM_ERROR) { ret = BZ2_bzDecompressInit(&(state->stream), 0 /* library verbosity */, 1 /* do use slow low-mem algorithm */); } if (ret == BZ_OK) { a->compression_data = state; return (ARCHIVE_OK); } /* Library setup failed: Clean up. */ archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, "Internal error initializing %s library", a->archive.compression_name); free(state->uncompressed_buffer); free(state); /* Override the error message if we know what really went wrong. */ switch (ret) { case BZ_PARAM_ERROR: archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, "Internal error initializing compression library: " "invalid setup parameter"); break; case BZ_MEM_ERROR: archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, "Internal error initializing compression library: " "out of memory"); break; case BZ_CONFIG_ERROR: archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, "Internal error initializing compression library: " "mis-compiled library"); break; } return (ARCHIVE_FATAL); } /* * Return a block of data from the decompression buffer. Decompress more * as necessary. */ static ssize_t read_ahead(struct archive_read *a, const void **p, size_t min) { struct private_data *state; int read_avail, was_avail, ret; state = (struct private_data *)a->compression_data; was_avail = -1; if (!a->client_reader) { archive_set_error(&a->archive, ARCHIVE_ERRNO_PROGRAMMER, "No read callback is registered? " "This is probably an internal programming error."); return (ARCHIVE_FATAL); } read_avail = state->stream.next_out - state->read_next; if (read_avail + state->stream.avail_out < min) { memmove(state->uncompressed_buffer, state->read_next, read_avail); state->read_next = state->uncompressed_buffer; state->stream.next_out = state->read_next + read_avail; state->stream.avail_out = state->uncompressed_buffer_size - read_avail; } while (was_avail < read_avail && /* Made some progress. */ read_avail < (int)min && /* Haven't satisfied min. */ read_avail < (int)state->uncompressed_buffer_size) { /* !full */ if ((ret = drive_decompressor(a, state)) != ARCHIVE_OK) return (ret); was_avail = read_avail; read_avail = state->stream.next_out - state->read_next; } *p = state->read_next; return (read_avail); } /* * Mark a previously-returned block of data as read. */ static ssize_t read_consume(struct archive_read *a, size_t n) { struct private_data *state; state = (struct private_data *)a->compression_data; a->archive.file_position += n; state->read_next += n; if (state->read_next > state->stream.next_out) __archive_errx(1, "Request to consume too many " "bytes from bzip2 decompressor"); return (n); } /* * Clean up the decompressor. */ static int finish(struct archive_read *a) { struct private_data *state; int ret; state = (struct private_data *)a->compression_data; ret = ARCHIVE_OK; switch (BZ2_bzDecompressEnd(&(state->stream))) { case BZ_OK: break; default: archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, "Failed to clean up %s compressor", a->archive.compression_name); ret = ARCHIVE_FATAL; } free(state->uncompressed_buffer); free(state); a->compression_data = NULL; if (a->client_closer != NULL) (a->client_closer)(&a->archive, a->client_data); return (ret); } /* * Utility function to pull data through decompressor, reading input * blocks as necessary. */ static int drive_decompressor(struct archive_read *a, struct private_data *state) { ssize_t ret; int decompressed, total_decompressed; char *output; total_decompressed = 0; for (;;) { if (state->stream.avail_in == 0) { ret = (a->client_reader)(&a->archive, a->client_data, (const void **)&state->stream.next_in); if (ret < 0) { /* * TODO: Find a better way to handle * this read failure. */ goto fatal; } if (ret == 0 && total_decompressed == 0) { archive_set_error(&a->archive, EIO, "Premature end of %s compressed data", a->archive.compression_name); return (ARCHIVE_FATAL); } a->archive.raw_position += ret; state->stream.avail_in = ret; } { output = state->stream.next_out; /* Decompress some data. */ ret = BZ2_bzDecompress(&(state->stream)); decompressed = state->stream.next_out - output; /* Accumulate the total bytes of output. */ state->total_out += decompressed; total_decompressed += decompressed; switch (ret) { case BZ_OK: /* Decompressor made some progress. */ if (decompressed > 0) return (ARCHIVE_OK); break; case BZ_STREAM_END: /* Found end of stream. */ return (ARCHIVE_OK); default: /* Any other return value is an error. */ goto fatal; } } } return (ARCHIVE_OK); /* Return a fatal error. */ fatal: archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, "%s decompression failed", a->archive.compression_name); return (ARCHIVE_FATAL); } #endif /* HAVE_BZLIB_H */