397f6b1e7f
is the actual name here) on EBus and which are PCF8584 (on systems having a boot-bus controller the i2c are said to not be a PCF8584). Similar to the SUNW,envctrl devices, onboard slaves for monitoring fans, temperatures and such hang off of these i2c devices. But there's also stuff like EEPROMs housing the hostid of the system and the boards usally have a connector to add custom slave devices (on CP1500 there's actually a second PCF8584 with its own I2C bus for these). This driver already works fine but I'm not yet sure if access to the slave devices on CP1400/CP1500 marked as "reserved for factory use" in the docs should be blocked (most likely these are the voltage controllers wich aren't meant to be controller by software and even not by the firmware). Once the issues with polled mode are fixed in the common pcf(4) part in pcf.c, this front-end should probably honour the poll-mode property of the i2c devices. Tested on Ultra AXe and CP1500 (Netra t1 100). OK'ed by: joerg, nsouch
262 lines
7.1 KiB
C
262 lines
7.1 KiB
C
/*-
|
|
* Copyright (c) 2004 Marius Strobl, Joerg Wunsch
|
|
*
|
|
* derived from sys/i386/isa/pcf.c which is:
|
|
*
|
|
* Copyright (c) 1998 Nicolas Souchu, Marc Bouget
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Device specific driver for the EBus i2c devices found on some sun4u
|
|
* systems. On systems not having a boot-bus controller the i2c devices
|
|
* are PCF8584.
|
|
*
|
|
* Known onboard slave devices on the primary bus are:
|
|
*
|
|
* AXe:
|
|
* 0x40 PCF8574 I/O fan status (CPU fans 1+2)
|
|
* 0x9e PCF8591 A/D temperature (CPU + hotspot)
|
|
*
|
|
* AXmp:
|
|
* 0x70 PCF8574 I/O fan status (fans 1-4)
|
|
* 0x78 PCF8574 I/O fan fail interrupt
|
|
* 0x9a PCF8591 A/D voltage (CPU core)
|
|
* 0x9c PCF8591 A/D temperature (hotspots 1+2, aux. analog 1+2)
|
|
* 0x9e PCF8591 A/D temperature (CPUs 1-4)
|
|
*
|
|
* CP1400:
|
|
* 0x70 PCF8574 I/O reserved for factory use
|
|
* 0x9e PCF8591 A/D temperature (CPU)
|
|
*
|
|
* CP1500:
|
|
* 0x70 PCF8574 I/O reserved for factory use
|
|
* 0x72 PCF8574 I/O geographic address + power supply status lines
|
|
* 0x9e PCF8591 A/D temperature (CPU)
|
|
* 0xa0 AT24C01A hostid
|
|
*
|
|
* For AXmp, CP1400 and CP1500 these are described in more detail in:
|
|
* http://www.sun.com/oem/products/manuals/805-7581-04.pdf
|
|
*
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/resource.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/ofw/openfirm.h>
|
|
|
|
#include <sparc64/ebus/ebusvar.h>
|
|
|
|
#include <dev/iicbus/iiconf.h>
|
|
#include <dev/pcf/pcfvar.h>
|
|
#include "iicbus_if.h"
|
|
|
|
#define PCF_NAME "pcf"
|
|
|
|
static int pcf_ebus_probe(device_t);
|
|
static int pcf_ebus_attach(device_t);
|
|
static int pcf_ebus_detach(device_t);
|
|
|
|
static device_method_t pcf_ebus_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, pcf_ebus_probe),
|
|
DEVMETHOD(device_attach, pcf_ebus_attach),
|
|
DEVMETHOD(device_detach, pcf_ebus_detach),
|
|
|
|
/* iicbus interface */
|
|
DEVMETHOD(iicbus_callback, iicbus_null_callback),
|
|
DEVMETHOD(iicbus_repeated_start, pcf_repeated_start),
|
|
DEVMETHOD(iicbus_start, pcf_start),
|
|
DEVMETHOD(iicbus_stop, pcf_stop),
|
|
DEVMETHOD(iicbus_write, pcf_write),
|
|
DEVMETHOD(iicbus_read, pcf_read),
|
|
DEVMETHOD(iicbus_reset, pcf_rst_card),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static devclass_t pcf_ebus_devclass;
|
|
|
|
static driver_t pcf_ebus_driver = {
|
|
PCF_NAME,
|
|
pcf_ebus_methods,
|
|
sizeof(struct pcf_softc),
|
|
};
|
|
|
|
static int
|
|
pcf_ebus_probe(device_t dev)
|
|
{
|
|
char *compat;
|
|
|
|
/*
|
|
* We must not attach to this i2c device if this is a system with
|
|
* a boot-bus controller. Additionally testing the compatibility
|
|
* property will hopefully take care of this.
|
|
*/
|
|
if (strcmp("i2c", ebus_get_name(dev)) == 0) {
|
|
compat = ebus_get_compat(dev);
|
|
if (compat != NULL && strcmp("i2cpcf,8584", compat) == 0) {
|
|
device_set_desc(dev, "PCF8584 I2C bus controller");
|
|
return (0);
|
|
}
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
pcf_ebus_attach(device_t dev)
|
|
{
|
|
struct pcf_softc *sc;
|
|
int rv = ENXIO;
|
|
phandle_t node;
|
|
uint64_t own_addr;
|
|
|
|
sc = DEVTOSOFTC(dev);
|
|
bzero(sc, sizeof(struct pcf_softc));
|
|
|
|
/* get OFW node of the pcf */
|
|
if ((node = ebus_get_node(dev)) <= 0) {
|
|
device_printf(dev, "cannot get OFW node\n");
|
|
goto error;
|
|
}
|
|
|
|
/* IO port is mandatory */
|
|
sc->res_ioport = bus_alloc_resource_any(dev, SYS_RES_IOPORT,
|
|
&sc->rid_ioport, RF_ACTIVE);
|
|
if (sc->res_ioport == 0) {
|
|
device_printf(dev, "cannot reserve I/O port range\n");
|
|
goto error;
|
|
}
|
|
|
|
sc->pcf_flags = device_get_flags(dev);
|
|
|
|
/*
|
|
* XXX use poll-mode property?
|
|
*/
|
|
if (!(sc->pcf_flags & IIC_POLLED)) {
|
|
sc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&sc->rid_irq, RF_ACTIVE);
|
|
if (sc->res_irq == 0) {
|
|
device_printf(dev, "can't reserve irq, polled mode.\n");
|
|
sc->pcf_flags |= IIC_POLLED;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* XXX on AXmp there's probably a second IRQ which is the fan fail
|
|
* interrupt genererated by the PCF8574 at 0x78.
|
|
*/
|
|
|
|
/* get address of the pcf */
|
|
if (OF_getprop(node, "own-address", &own_addr, sizeof(own_addr)) ==
|
|
-1) {
|
|
device_printf(dev, "cannot get own address\n");
|
|
goto error;
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "PCF8584 address: 0x%08llx\n", (unsigned
|
|
long long)own_addr);
|
|
|
|
/* reset the chip */
|
|
pcf_rst_card(dev, IIC_FASTEST, own_addr, NULL);
|
|
|
|
if (sc->res_irq) {
|
|
rv = BUS_SETUP_INTR(device_get_parent(dev), dev, sc->res_irq,
|
|
INTR_TYPE_NET /* | INTR_ENTROPY */, pcf_intr, sc,
|
|
&sc->intr_cookie);
|
|
if (rv) {
|
|
device_printf(dev, "could not setup IRQ\n");
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
if ((sc->iicbus = device_add_child(dev, "iicbus", -1)) == NULL)
|
|
device_printf(dev, "could not allocate iicbus instance\n");
|
|
|
|
/* probe and attach the iicbus */
|
|
bus_generic_attach(dev);
|
|
|
|
return (0);
|
|
|
|
error:
|
|
if (sc->res_irq != 0) {
|
|
bus_deactivate_resource(dev, SYS_RES_IRQ, sc->rid_irq,
|
|
sc->res_irq);
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->rid_irq,
|
|
sc->res_irq);
|
|
}
|
|
if (sc->res_ioport != 0) {
|
|
bus_deactivate_resource(dev, SYS_RES_IOPORT, sc->rid_ioport,
|
|
sc->res_ioport);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, sc->rid_ioport,
|
|
sc->res_ioport);
|
|
}
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
pcf_ebus_detach(device_t dev)
|
|
{
|
|
struct pcf_softc *sc;
|
|
int rv;
|
|
|
|
sc = DEVTOSOFTC(dev);
|
|
|
|
if ((rv = bus_generic_detach(dev)) != 0)
|
|
return (rv);
|
|
|
|
if ((rv = device_delete_child(dev, sc->iicbus)) != 0)
|
|
return (rv);
|
|
|
|
if (sc->res_irq != 0) {
|
|
BUS_TEARDOWN_INTR(device_get_parent(dev), dev, sc->res_irq,
|
|
sc->intr_cookie);
|
|
bus_deactivate_resource(dev, SYS_RES_IRQ, sc->rid_irq,
|
|
sc->res_irq);
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->rid_irq,
|
|
sc->res_irq);
|
|
}
|
|
|
|
bus_deactivate_resource(dev, SYS_RES_IOPORT, sc->rid_ioport,
|
|
sc->res_ioport);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, sc->rid_ioport,
|
|
sc->res_ioport);
|
|
|
|
return (0);
|
|
}
|
|
|
|
DRIVER_MODULE(pcf_ebus, ebus, pcf_ebus_driver, pcf_ebus_devclass, 0, 0);
|
|
MODULE_DEPEND(pcf_ebus, iicbus, PCF_MINVER, PCF_PREFVER, PCF_MAXVER);
|
|
MODULE_VERSION(pcf_ebus, PCF_MODVER);
|