freebsd-dev/sys/gnu/dts/arm64/renesas/r8a77990-ebisu.dts
Emmanuel Vadot 394b62b7ab Import DTS files from Linux 5.0
MFC after:	2 months
2019-04-10 18:15:36 +00:00

687 lines
12 KiB
Plaintext

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Device Tree Source for the ebisu board
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a77990.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Ebisu board based on r8a77990";
compatible = "renesas,ebisu", "renesas,r8a77990";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
};
chosen {
bootargs = "ignore_loglevel";
stdout-path = "serial0:115200n8";
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <11289600>;
};
cvbs-in {
compatible = "composite-video-connector";
label = "CVBS IN";
port {
cvbs_con: endpoint {
remote-endpoint = <&adv7482_ain7>;
};
};
};
hdmi-in {
compatible = "hdmi-connector";
label = "HDMI IN";
type = "a";
port {
hdmi_in_con: endpoint {
remote-endpoint = <&adv7482_hdmi>;
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&reg_3p3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vbus0_usb2: regulator-vbus0-usb2 {
compatible = "regulator-fixed";
regulator-name = "USB20_VBUS_CN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
rsnd_ak4613: sound {
compatible = "simple-scu-audio-card";
simple-audio-card,name = "rsnd-ak4613";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcpu>;
simple-audio-card,frame-master = <&sndcpu>;
simple-audio-card,prefix = "ak4613";
simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback",
"DAI0 Capture", "ak4613 Capture";
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4613>;
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
x13_clk: x13 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
};
&audio_clk_a {
clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
phy-mode = "rgmii-txid";
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
};
};
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
status = "okay";
channel0 {
status = "okay";
};
};
&csi40 {
status = "okay";
ports {
port@0 {
reg = <0>;
csi40_in: endpoint {
clock-lanes = <0>;
data-lanes = <1 2>;
remote-endpoint = <&adv7482_txa>;
};
};
};
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&x13_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&ehci0 {
dr_mode = "otg";
status = "okay";
};
&extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "otg";
status = "okay";
};
&i2c0 {
status = "okay";
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
video-receiver@70 {
compatible = "adi,adv7482";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&gpio0>;
interrupt-names = "intrq1", "intrq2";
interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
<17 IRQ_TYPE_LEVEL_LOW>;
port@7 {
reg = <7>;
adv7482_ain7: endpoint {
remote-endpoint = <&cvbs_con>;
};
};
port@8 {
reg = <8>;
adv7482_hdmi: endpoint {
remote-endpoint = <&hdmi_in_con>;
};
};
port@a {
reg = <0xa>;
adv7482_txa: endpoint {
clock-lanes = <0>;
data-lanes = <1 2>;
remote-endpoint = <&csi40_in>;
};
};
};
};
&i2c3 {
status = "okay";
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 3>;
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x12_clk>;
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
};
&lvds0 {
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
&lvds1 {
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
dr_mode = "otg";
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
};
&pciec0 {
status = "okay";
};
&pfc {
avb_pins: avb {
mux {
groups = "avb_link", "avb_mii";
function = "avb";
};
};
canfd0_pins: canfd0 {
groups = "canfd0_data";
function = "canfd0";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
};
pwm3_pins: pwm3 {
groups = "pwm3_b";
function = "pwm3";
};
pwm5_pins: pwm5 {
groups = "pwm5_a";
function = "pwm5";
};
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sdhi1_pins: sd1 {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <3300>;
};
sdhi1_pins_uhs: sd1_uhs {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <1800>;
};
sdhi3_pins: sd3 {
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
function = "sdhi3";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
};
sound_clk_pins: sound_clk {
groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
"audio_clkout_a", "audio_clkout1_a";
function = "audio_clk";
};
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
usb0_pins: usb {
groups = "usb0_b", "usb0_id";
function = "usb0";
};
usb30_pins: usb30 {
groups = "usb30";
function = "usb30";
};
};
&pwm3 {
pinctrl-0 = <&pwm3_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm5 {
pinctrl-0 = <&pwm5_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
clkout-lr-synchronous;
status = "okay";
/* update <audio_clk_b> to <cs2000> */
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
<&cpg CPG_CORE R8A77990_CLK_ZA2>;
rcar_sound,dai {
dai0 {
playback = <&ssi0 &src0 &dvc0>;
capture = <&ssi1 &src1 &dvc1>;
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&ssi1 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
vbus-supply = <&vbus0_usb2>;
status = "okay";
};
&usb3_peri0 {
companion = <&xhci0>;
status = "okay";
};
&vin4 {
status = "okay";
};
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi1 {
pinctrl-0 = <&sdhi1_pins>;
pinctrl-1 = <&sdhi1_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi3 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi3_pins>;
pinctrl-1 = <&sdhi3_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
mmc-hs200-1_8v;
bus-width = <8>;
non-removable;
status = "okay";
};