704 lines
14 KiB
Plaintext
704 lines
14 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
|
* Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include "rk3399.dtsi"
|
|
#include "rk3399-opp.dtsi"
|
|
|
|
/ {
|
|
model = "Pine64 RockPro64";
|
|
compatible = "pine64,rockpro64", "rockchip,rk3399";
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
clkin_gmac: external-gmac-clock {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "clkin_gmac";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
dc_12v: dc-12v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "dc_12v";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwrbtn>;
|
|
|
|
power {
|
|
debounce-interval = <100>;
|
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
label = "GPIO Key Power";
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
|
|
|
|
work-led {
|
|
label = "work";
|
|
default-state = "on";
|
|
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
diy-led {
|
|
label = "diy";
|
|
default-state = "off";
|
|
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk808 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/* switched by pmic_sleep */
|
|
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v8_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pwr_en>;
|
|
regulator-name = "vcc3v3_pcie";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&dc_12v>;
|
|
};
|
|
|
|
vcc3v3_sys: vcc3v3-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
|
vcc5v0_host: vcc5v0-host-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc5v0_typec: vcc5v0-typec-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_typec_en>;
|
|
regulator-name = "vcc5v0_typec";
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc_sys: vcc-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&dc_12v>;
|
|
};
|
|
|
|
vdd_log: vdd-log {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm2 0 25000 1>;
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_l>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_b>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_b>;
|
|
};
|
|
|
|
&emmc_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
|
assigned-clock-parents = <&clkin_gmac>;
|
|
clock_in_out = "input";
|
|
phy-supply = <&vcc_lan>;
|
|
phy-mode = "rgmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 50000>;
|
|
tx_delay = <0x28>;
|
|
rx_delay = <0x11>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
ddc-i2c-bus = <&i2c3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_cec>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
i2c-scl-rising-time-ns = <168>;
|
|
i2c-scl-falling-time-ns = <4>;
|
|
status = "okay";
|
|
|
|
rk808: pmic@1b {
|
|
compatible = "rockchip,rk808";
|
|
reg = <0x1b>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "xin32k", "rk808-clkout2";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
|
|
vcc1-supply = <&vcc_sys>;
|
|
vcc2-supply = <&vcc_sys>;
|
|
vcc3-supply = <&vcc_sys>;
|
|
vcc4-supply = <&vcc_sys>;
|
|
vcc6-supply = <&vcc_sys>;
|
|
vcc7-supply = <&vcc_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc_sys>;
|
|
vcc10-supply = <&vcc_sys>;
|
|
vcc11-supply = <&vcc_sys>;
|
|
vcc12-supply = <&vcc3v3_sys>;
|
|
vddio-supply = <&vcc1v8_pmu>;
|
|
|
|
regulators {
|
|
vdd_center: DCDC_REG1 {
|
|
regulator-name = "vdd_center";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_l: DCDC_REG2 {
|
|
regulator-name = "vdd_cpu_l";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: DCDC_REG4 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc1v8_dvp: LDO_REG1 {
|
|
regulator-name = "vcc1v8_dvp";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v0_touch: LDO_REG2 {
|
|
regulator-name = "vcc3v0_touch";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc1v8_pmu: LDO_REG3 {
|
|
regulator-name = "vcc1v8_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc_sdio: LDO_REG4 {
|
|
regulator-name = "vcc_sdio";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcca3v0_codec: LDO_REG5 {
|
|
regulator-name = "vcca3v0_codec";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v5: LDO_REG6 {
|
|
regulator-name = "vcc_1v5";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1500000>;
|
|
};
|
|
};
|
|
|
|
vcca1v8_codec: LDO_REG7 {
|
|
regulator-name = "vcca1v8_codec";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v0: LDO_REG8 {
|
|
regulator-name = "vcc_3v0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
|
regulator-name = "vcc3v3_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_s0: SWITCH_REG2 {
|
|
regulator-name = "vcc3v3_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vdd_cpu_b: regulator@40 {
|
|
compatible = "silergy,syr827";
|
|
reg = <0x40>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vsel1_gpio>;
|
|
regulator-name = "vdd_cpu_b";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-ramp-delay = <1000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: regulator@41 {
|
|
compatible = "silergy,syr828";
|
|
reg = <0x41>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vsel2_gpio>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-ramp-delay = <1000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
i2c-scl-rising-time-ns = <300>;
|
|
i2c-scl-falling-time-ns = <15>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
i2c-scl-rising-time-ns = <450>;
|
|
i2c-scl-falling-time-ns = <15>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
i2c-scl-rising-time-ns = <600>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
|
|
fusb0: typec-portc@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fusb0_int>;
|
|
vbus-supply = <&vcc5v0_typec>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
rockchip,playback-channels = <8>;
|
|
rockchip,capture-channels = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s1 {
|
|
rockchip,playback-channels = <2>;
|
|
rockchip,capture-channels = <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
|
|
bt656-supply = <&vcc1v8_dvp>;
|
|
audio-supply = <&vcca1v8_codec>;
|
|
sdmmc-supply = <&vcc_sdio>;
|
|
gpio1830-supply = <&vcc_3v0>;
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
pmu1830-supply = <&vcc_3v0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
buttons {
|
|
pwrbtn: pwrbtn {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
fusb302x {
|
|
fusb0_int: fusb0-int {
|
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
work_led_gpio: work_led-gpio {
|
|
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
diy_led_gpio: diy_led-gpio {
|
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
lcd-panel {
|
|
lcd_panel_reset: lcd-panel-reset {
|
|
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
pcie_pwr_en: pcie-pwr-en {
|
|
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
vsel1_gpio: vsel1-gpio {
|
|
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
vsel2_gpio: vsel2-gpio {
|
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb-typec {
|
|
vcc5v0_typec_en: vcc5v0_typec_en {
|
|
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb2 {
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcca1v8_s3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
max-frequency = <150000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&tcphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tcphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
/* tshut mode 0:CRU 1:GPIO */
|
|
rockchip,hw-tshut-mode = <1>;
|
|
/* tshut polarity 0:LOW 1:HIGH */
|
|
rockchip,hw-tshut-polarity = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
|
|
u2phy0_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy0_host: host-port {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
|
|
u2phy1_otg: otg-port {
|
|
status = "okay";
|
|
};
|
|
|
|
u2phy1_host: host-port {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl_mmu {
|
|
status = "okay";
|
|
};
|