freebsd-dev/sys/netipsec/ipsec_mbuf.c
Sam Leffler 88768458d2 "Fast IPsec": this is an experimental IPsec implementation that is derived
from the KAME IPsec implementation, but with heavy borrowing and influence
of openbsd.  A key feature of this implementation is that it uses the kernel
crypto framework to do all crypto work so when h/w crypto support is present
IPsec operation is automatically accelerated.  Otherwise the protocol
implementations are rather differet while the SADB and policy management
code is very similar to KAME (for the moment).

Note that this implementation is enabled with a FAST_IPSEC option.  With this
you get all protocols; i.e. there is no FAST_IPSEC_ESP option.

FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a
single system.

This software is well tested with IPv4 but should be considered very
experimental (i.e. do not deploy in production environments).  This software
does NOT currently support IPv6.  In fact do not configure FAST_IPSEC and
INET6 in the same system.

Obtained from:	KAME + openbsd
Supported by:	Vernier Networks
2002-10-16 02:10:08 +00:00

402 lines
11 KiB
C

/* $FreeBSD$ */
/*
* IPsec-specific mbuf routines.
*/
#include "opt_param.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netipsec/ipsec.h>
extern struct mbuf *m_getptr(struct mbuf *, int, int *);
/*
* Create a writable copy of the mbuf chain. While doing this
* we compact the chain with a goal of producing a chain with
* at most two mbufs. The second mbuf in this chain is likely
* to be a cluster. The primary purpose of this work is to create
* a writable packet for encryption, compression, etc. The
* secondary goal is to linearize the data so the data can be
* passed to crypto hardware in the most efficient manner possible.
*/
struct mbuf *
m_clone(struct mbuf *m0)
{
struct mbuf *m, *mprev;
KASSERT(m0 != NULL, ("m_clone: null mbuf"));
mprev = NULL;
for (m = m0; m != NULL; m = mprev->m_next) {
/*
* Regular mbufs are ignored unless there's a cluster
* in front of it that we can use to coalesce. We do
* the latter mainly so later clusters can be coalesced
* also w/o having to handle them specially (i.e. convert
* mbuf+cluster -> cluster). This optimization is heavily
* influenced by the assumption that we're running over
* Ethernet where MCBYTES is large enough that the max
* packet size will permit lots of coalescing into a
* single cluster. This in turn permits efficient
* crypto operations, especially when using hardware.
*/
if ((m->m_flags & M_EXT) == 0) {
if (mprev && (mprev->m_flags & M_EXT) &&
m->m_len <= M_TRAILINGSPACE(mprev)) {
/* XXX: this ignores mbuf types */
memcpy(mtod(mprev, caddr_t) + mprev->m_len,
mtod(m, caddr_t), m->m_len);
mprev->m_len += m->m_len;
mprev->m_next = m->m_next; /* unlink from chain */
m_free(m); /* reclaim mbuf */
newipsecstat.ips_mbcoalesced++;
} else {
mprev = m;
}
continue;
}
/*
* Cluster'd mbufs are left alone (for now).
*/
if (!MEXT_IS_REF(m)) {
mprev = m;
continue;
}
/*
* Not writable, replace with a copy or coalesce with
* the previous mbuf if possible (since we have to copy
* it anyway, we try to reduce the number of mbufs and
* clusters so that future work is easier).
*/
/* XXX why can M_PKTHDR be set past the first mbuf? */
KASSERT(m->m_flags & M_EXT,
("m_clone: m_flags 0x%x", m->m_flags));
/* NB: we only coalesce into a cluster */
if (mprev == NULL || (mprev->m_flags & M_EXT) == 0 ||
m->m_len > M_TRAILINGSPACE(mprev)) {
struct mbuf *n;
/*
* Allocate a new page, copy the data to the front
* and release the reference to the old page.
*/
n = m_getcl(M_DONTWAIT, m->m_type, m->m_flags);
if (n == NULL) {
m_freem(m0);
return (NULL);
}
if (mprev == NULL && (m->m_flags & M_PKTHDR))
M_COPY_PKTHDR(n, m);
memcpy(mtod(n, caddr_t), mtod(m, caddr_t), m->m_len);
n->m_len = m->m_len;
n->m_next = m->m_next;
if (mprev == NULL)
m0 = n; /* new head of chain */
else
mprev->m_next = n; /* replace old mbuf */
m_free(m); /* release old mbuf */
mprev = n;
newipsecstat.ips_clcopied++;
} else {
/* XXX: this ignores mbuf types */
memcpy(mtod(mprev, caddr_t) + mprev->m_len,
mtod(m, caddr_t), m->m_len);
mprev->m_len += m->m_len;
mprev->m_next = m->m_next; /* unlink from chain */
m_free(m); /* reclaim mbuf */
newipsecstat.ips_clcoalesced++;
}
}
return (m0);
}
/*
* Make space for a new header of length hlen at offset off
* in the packet. When doing this we allocate new mbufs only
* when absolutely necessary. The mbuf where the new header
* is to go is returned together with an offset into the mbuf.
* If NULL is returned then the mbuf chain may have been modified;
* the caller is assumed to always free the chain.
*/
struct mbuf *
m_makespace(struct mbuf *m0, int skip, int hlen, int *off)
{
struct mbuf *m;
unsigned remain;
KASSERT(m0 != NULL, ("m_dmakespace: null mbuf"));
KASSERT(hlen < MHLEN, ("m_makespace: hlen too big: %u", hlen));
for (m = m0; m && skip > m->m_len; m = m->m_next)
skip -= m->m_len;
if (m == NULL)
return (NULL);
/*
* At this point skip is the offset into the mbuf m
* where the new header should be placed. Figure out
* if there's space to insert the new header. If so,
* and copying the remainder makese sense then do so.
* Otherwise insert a new mbuf in the chain, splitting
* the contents of m as needed.
*/
remain = m->m_len - skip; /* data to move */
/* XXX code doesn't handle clusters XXX */
KASSERT(remain < MLEN, ("m_makespace: remainder too big: %u", remain));
if (hlen > M_TRAILINGSPACE(m)) {
struct mbuf *n;
/*
* Not enough space in m, split the contents
* of m, inserting new mbufs as required.
*
* NB: this ignores mbuf types.
*/
MGET(n, M_DONTWAIT, MT_DATA);
if (n == NULL)
return (NULL);
n->m_next = m->m_next; /* splice new mbuf */
m->m_next = n;
newipsecstat.ips_mbinserted++;
if (hlen <= M_TRAILINGSPACE(m) + remain) {
/*
* New header fits in the old mbuf if we copy
* the remainder; just do the copy to the new
* mbuf and we're good to go.
*/
memcpy(mtod(n, caddr_t),
mtod(m, caddr_t) + skip, remain);
n->m_len = remain;
m->m_len = skip + hlen;
*off = skip;
} else {
/*
* No space in the old mbuf for the new header.
* Make space in the new mbuf and check the
* remainder'd data fits too. If not then we
* must allocate an additional mbuf (yech).
*/
n->m_len = 0;
if (remain + hlen > M_TRAILINGSPACE(n)) {
struct mbuf *n2;
MGET(n2, M_DONTWAIT, MT_DATA);
/* NB: new mbuf is on chain, let caller free */
if (n2 == NULL)
return (NULL);
n2->m_len = 0;
memcpy(mtod(n2, caddr_t),
mtod(m, caddr_t) + skip, remain);
n2->m_len = remain;
/* splice in second mbuf */
n2->m_next = n->m_next;
n->m_next = n2;
newipsecstat.ips_mbinserted++;
} else {
memcpy(mtod(n, caddr_t) + hlen,
mtod(m, caddr_t) + skip, remain);
n->m_len += remain;
}
m->m_len -= remain;
n->m_len += hlen;
m = n; /* header is at front ... */
*off = 0; /* ... of new mbuf */
}
} else {
/*
* Copy the remainder to the back of the mbuf
* so there's space to write the new header.
*/
/* XXX can this be memcpy? does it handle overlap? */
ovbcopy(mtod(m, caddr_t) + skip,
mtod(m, caddr_t) + skip + hlen, remain);
m->m_len += hlen;
*off = skip;
}
m0->m_pkthdr.len += hlen; /* adjust packet length */
return m;
}
/*
* m_pad(m, n) pads <m> with <n> bytes at the end. The packet header
* length is updated, and a pointer to the first byte of the padding
* (which is guaranteed to be all in one mbuf) is returned.
*/
caddr_t
m_pad(struct mbuf *m, int n)
{
register struct mbuf *m0, *m1;
register int len, pad;
caddr_t retval;
if (n <= 0) { /* No stupid arguments. */
DPRINTF(("m_pad: pad length invalid (%d)\n", n));
m_freem(m);
return NULL;
}
len = m->m_pkthdr.len;
pad = n;
m0 = m;
while (m0->m_len < len) {
KASSERT(m0->m_next != NULL, ("m_pad: m0 null, len %u m_len %u", len, m0->m_len));/*XXX*/
len -= m0->m_len;
m0 = m0->m_next;
}
if (m0->m_len != len) {
DPRINTF(("m_pad: length mismatch (should be %d instead of %d)\n",
m->m_pkthdr.len, m->m_pkthdr.len + m0->m_len - len));
m_freem(m);
return NULL;
}
/* Check for zero-length trailing mbufs, and find the last one. */
for (m1 = m0; m1->m_next; m1 = m1->m_next) {
if (m1->m_next->m_len != 0) {
DPRINTF(("m_pad: length mismatch (should be %d "
"instead of %d)\n",
m->m_pkthdr.len,
m->m_pkthdr.len + m1->m_next->m_len));
m_freem(m);
return NULL;
}
m0 = m1->m_next;
}
if (pad > M_TRAILINGSPACE(m0)) {
/* Add an mbuf to the chain. */
MGET(m1, M_DONTWAIT, MT_DATA);
if (m1 == 0) {
m_freem(m0);
DPRINTF(("m_pad: unable to get extra mbuf\n"));
return NULL;
}
m0->m_next = m1;
m0 = m1;
m0->m_len = 0;
}
retval = m0->m_data + m0->m_len;
m0->m_len += pad;
m->m_pkthdr.len += pad;
return retval;
}
/*
* Remove hlen data at offset skip in the packet. This is used by
* the protocols strip protocol headers and associated data (e.g. IV,
* authenticator) on input.
*/
int
m_striphdr(struct mbuf *m, int skip, int hlen)
{
struct mbuf *m1;
int roff;
/* Find beginning of header */
m1 = m_getptr(m, skip, &roff);
if (m1 == NULL)
return (EINVAL);
/* Remove the header and associated data from the mbuf. */
if (roff == 0) {
/* The header was at the beginning of the mbuf */
newipsecstat.ips_input_front++;
m_adj(m1, hlen);
if ((m1->m_flags & M_PKTHDR) == 0)
m->m_pkthdr.len -= hlen;
} else if (roff + hlen >= m1->m_len) {
struct mbuf *mo;
/*
* Part or all of the header is at the end of this mbuf,
* so first let's remove the remainder of the header from
* the beginning of the remainder of the mbuf chain, if any.
*/
newipsecstat.ips_input_end++;
if (roff + hlen > m1->m_len) {
/* Adjust the next mbuf by the remainder */
m_adj(m1->m_next, roff + hlen - m1->m_len);
/* The second mbuf is guaranteed not to have a pkthdr... */
m->m_pkthdr.len -= (roff + hlen - m1->m_len);
}
/* Now, let's unlink the mbuf chain for a second...*/
mo = m1->m_next;
m1->m_next = NULL;
/* ...and trim the end of the first part of the chain...sick */
m_adj(m1, -(m1->m_len - roff));
if ((m1->m_flags & M_PKTHDR) == 0)
m->m_pkthdr.len -= (m1->m_len - roff);
/* Finally, let's relink */
m1->m_next = mo;
} else {
/*
* The header lies in the "middle" of the mbuf; copy
* the remainder of the mbuf down over the header.
*/
newipsecstat.ips_input_middle++;
bcopy(mtod(m1, u_char *) + roff + hlen,
mtod(m1, u_char *) + roff,
m1->m_len - (roff + hlen));
m1->m_len -= hlen;
m->m_pkthdr.len -= hlen;
}
return (0);
}
/*
* Diagnostic routine to check mbuf alignment as required by the
* crypto device drivers (that use DMA).
*/
void
m_checkalignment(const char* where, struct mbuf *m0, int off, int len)
{
int roff;
struct mbuf *m = m_getptr(m0, off, &roff);
caddr_t addr;
if (m == NULL)
return;
printf("%s (off %u len %u): ", where, off, len);
addr = mtod(m, caddr_t) + roff;
do {
int mlen;
if (((uintptr_t) addr) & 3) {
printf("addr misaligned %p,", addr);
break;
}
mlen = m->m_len;
if (mlen > len)
mlen = len;
len -= mlen;
if (len && (mlen & 3)) {
printf("len mismatch %u,", mlen);
break;
}
m = m->m_next;
addr = m ? mtod(m, caddr_t) : NULL;
} while (m && len > 0);
for (m = m0; m; m = m->m_next)
printf(" [%p:%u]", mtod(m, caddr_t), m->m_len);
printf("\n");
}