7d48aa4c72
This patch will: - Update ixgbe shared code - Add support for Intel(R) Ethernet Connection X552 1000BASE-T - Add error handling for link state check preventing VF from stopping traffic after changing PF's MTU value Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com> Reviewed by: Intel Networking Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D13885
1719 lines
50 KiB
C
1719 lines
50 KiB
C
/******************************************************************************
|
|
SPDX-License-Identifier: BSD-3-Clause
|
|
|
|
Copyright (c) 2001-2017, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
#include "ixgbe_api.h"
|
|
#include "ixgbe_common.h"
|
|
|
|
#define IXGBE_EMPTY_PARAM
|
|
|
|
static const u32 ixgbe_mvals_base[IXGBE_MVALS_IDX_LIMIT] = {
|
|
IXGBE_MVALS_INIT(IXGBE_EMPTY_PARAM)
|
|
};
|
|
|
|
static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = {
|
|
IXGBE_MVALS_INIT(_X540)
|
|
};
|
|
|
|
static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {
|
|
IXGBE_MVALS_INIT(_X550)
|
|
};
|
|
|
|
static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = {
|
|
IXGBE_MVALS_INIT(_X550EM_x)
|
|
};
|
|
|
|
static const u32 ixgbe_mvals_X550EM_a[IXGBE_MVALS_IDX_LIMIT] = {
|
|
IXGBE_MVALS_INIT(_X550EM_a)
|
|
};
|
|
|
|
/**
|
|
* ixgbe_dcb_get_rtrup2tc - read rtrup2tc reg
|
|
* @hw: pointer to hardware structure
|
|
* @map: pointer to u8 arr for returning map
|
|
*
|
|
* Read the rtrup2tc HW register and resolve its content into map
|
|
**/
|
|
void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map)
|
|
{
|
|
if (hw->mac.ops.get_rtrup2tc)
|
|
hw->mac.ops.get_rtrup2tc(hw, map);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_shared_code - Initialize the shared code
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* This will assign function pointers and assign the MAC type and PHY code.
|
|
* Does not touch the hardware. This function must be called prior to any
|
|
* other function in the shared code. The ixgbe_hw structure should be
|
|
* memset to 0 prior to calling this function. The following fields in
|
|
* hw structure should be filled in prior to calling this function:
|
|
* hw_addr, back, device_id, vendor_id, subsystem_device_id,
|
|
* subsystem_vendor_id, and revision_id
|
|
**/
|
|
s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status;
|
|
|
|
DEBUGFUNC("ixgbe_init_shared_code");
|
|
|
|
/*
|
|
* Set the mac type
|
|
*/
|
|
ixgbe_set_mac_type(hw);
|
|
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
status = ixgbe_init_ops_82598(hw);
|
|
break;
|
|
case ixgbe_mac_82599EB:
|
|
status = ixgbe_init_ops_82599(hw);
|
|
break;
|
|
case ixgbe_mac_X540:
|
|
status = ixgbe_init_ops_X540(hw);
|
|
break;
|
|
case ixgbe_mac_X550:
|
|
status = ixgbe_init_ops_X550(hw);
|
|
break;
|
|
case ixgbe_mac_X550EM_x:
|
|
status = ixgbe_init_ops_X550EM_x(hw);
|
|
break;
|
|
case ixgbe_mac_X550EM_a:
|
|
status = ixgbe_init_ops_X550EM_a(hw);
|
|
break;
|
|
default:
|
|
status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
|
|
break;
|
|
}
|
|
hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME;
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_mac_type - Sets MAC type
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* This function sets the mac type of the adapter based on the
|
|
* vendor ID and device ID stored in the hw structure.
|
|
**/
|
|
s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
|
|
{
|
|
s32 ret_val = IXGBE_SUCCESS;
|
|
|
|
DEBUGFUNC("ixgbe_set_mac_type\n");
|
|
|
|
if (hw->vendor_id != IXGBE_INTEL_VENDOR_ID) {
|
|
ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
|
|
"Unsupported vendor id: %x", hw->vendor_id);
|
|
return IXGBE_ERR_DEVICE_NOT_SUPPORTED;
|
|
}
|
|
|
|
hw->mvals = ixgbe_mvals_base;
|
|
|
|
switch (hw->device_id) {
|
|
case IXGBE_DEV_ID_82598:
|
|
case IXGBE_DEV_ID_82598_BX:
|
|
case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
|
|
case IXGBE_DEV_ID_82598AF_DUAL_PORT:
|
|
case IXGBE_DEV_ID_82598AT:
|
|
case IXGBE_DEV_ID_82598AT2:
|
|
case IXGBE_DEV_ID_82598EB_CX4:
|
|
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
|
|
case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
|
|
case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
|
|
case IXGBE_DEV_ID_82598EB_XF_LR:
|
|
case IXGBE_DEV_ID_82598EB_SFP_LOM:
|
|
hw->mac.type = ixgbe_mac_82598EB;
|
|
break;
|
|
case IXGBE_DEV_ID_82599_KX4:
|
|
case IXGBE_DEV_ID_82599_KX4_MEZZ:
|
|
case IXGBE_DEV_ID_82599_XAUI_LOM:
|
|
case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
|
|
case IXGBE_DEV_ID_82599_KR:
|
|
case IXGBE_DEV_ID_82599_SFP:
|
|
case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
|
|
case IXGBE_DEV_ID_82599_SFP_FCOE:
|
|
case IXGBE_DEV_ID_82599_SFP_EM:
|
|
case IXGBE_DEV_ID_82599_SFP_SF2:
|
|
case IXGBE_DEV_ID_82599_SFP_SF_QP:
|
|
case IXGBE_DEV_ID_82599_QSFP_SF_QP:
|
|
case IXGBE_DEV_ID_82599EN_SFP:
|
|
case IXGBE_DEV_ID_82599_CX4:
|
|
case IXGBE_DEV_ID_82599_BYPASS:
|
|
case IXGBE_DEV_ID_82599_T3_LOM:
|
|
hw->mac.type = ixgbe_mac_82599EB;
|
|
break;
|
|
case IXGBE_DEV_ID_X540T:
|
|
case IXGBE_DEV_ID_X540T1:
|
|
case IXGBE_DEV_ID_X540_BYPASS:
|
|
hw->mac.type = ixgbe_mac_X540;
|
|
hw->mvals = ixgbe_mvals_X540;
|
|
break;
|
|
case IXGBE_DEV_ID_X550T:
|
|
case IXGBE_DEV_ID_X550T1:
|
|
hw->mac.type = ixgbe_mac_X550;
|
|
hw->mvals = ixgbe_mvals_X550;
|
|
break;
|
|
case IXGBE_DEV_ID_X550EM_X_KX4:
|
|
case IXGBE_DEV_ID_X550EM_X_KR:
|
|
case IXGBE_DEV_ID_X550EM_X_10G_T:
|
|
case IXGBE_DEV_ID_X550EM_X_1G_T:
|
|
case IXGBE_DEV_ID_X550EM_X_SFP:
|
|
case IXGBE_DEV_ID_X550EM_X_XFI:
|
|
hw->mac.type = ixgbe_mac_X550EM_x;
|
|
hw->mvals = ixgbe_mvals_X550EM_x;
|
|
break;
|
|
case IXGBE_DEV_ID_X550EM_A_KR:
|
|
case IXGBE_DEV_ID_X550EM_A_KR_L:
|
|
case IXGBE_DEV_ID_X550EM_A_SFP_N:
|
|
case IXGBE_DEV_ID_X550EM_A_SGMII:
|
|
case IXGBE_DEV_ID_X550EM_A_SGMII_L:
|
|
case IXGBE_DEV_ID_X550EM_A_1G_T:
|
|
case IXGBE_DEV_ID_X550EM_A_1G_T_L:
|
|
case IXGBE_DEV_ID_X550EM_A_10G_T:
|
|
case IXGBE_DEV_ID_X550EM_A_QSFP:
|
|
case IXGBE_DEV_ID_X550EM_A_QSFP_N:
|
|
case IXGBE_DEV_ID_X550EM_A_SFP:
|
|
hw->mac.type = ixgbe_mac_X550EM_a;
|
|
hw->mvals = ixgbe_mvals_X550EM_a;
|
|
break;
|
|
default:
|
|
ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
|
|
ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
|
|
"Unsupported device id: %x",
|
|
hw->device_id);
|
|
break;
|
|
}
|
|
|
|
DEBUGOUT2("ixgbe_set_mac_type found mac: %d, returns: %d\n",
|
|
hw->mac.type, ret_val);
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_hw - Initialize the hardware
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Initialize the hardware by resetting and then starting the hardware
|
|
**/
|
|
s32 ixgbe_init_hw(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_hw - Performs a hardware reset
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Resets the hardware by resetting the transmit and receive units, masks and
|
|
* clears all interrupts, performs a PHY reset, and performs a MAC reset
|
|
**/
|
|
s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_start_hw - Prepares hardware for Rx/Tx
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Starts the hardware by filling the bus info structure and media type,
|
|
* clears all on chip counters, initializes receive address registers,
|
|
* multicast table, VLAN filter table, calls routine to setup link and
|
|
* flow control settings, and leaves transmit and receive units disabled
|
|
* and uninitialized.
|
|
**/
|
|
s32 ixgbe_start_hw(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering,
|
|
* which is disabled by default in ixgbe_start_hw();
|
|
*
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Enable relaxed ordering;
|
|
**/
|
|
void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.enable_relaxed_ordering)
|
|
hw->mac.ops.enable_relaxed_ordering(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clear_hw_cntrs - Clear hardware counters
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Clears all hardware statistics counters by reading them from the hardware
|
|
* Statistics counters are clear on read.
|
|
**/
|
|
s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_media_type - Get media type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Returns the media type (fiber, copper, backplane)
|
|
**/
|
|
enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw),
|
|
ixgbe_media_type_unknown);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_mac_addr - Get MAC address
|
|
* @hw: pointer to hardware structure
|
|
* @mac_addr: Adapter MAC address
|
|
*
|
|
* Reads the adapter's MAC address from the first Receive Address Register
|
|
* (RAR0) A reset of the adapter must have been performed prior to calling
|
|
* this function in order for the MAC address to have been loaded from the
|
|
* EEPROM into RAR0
|
|
**/
|
|
s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr,
|
|
(hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_san_mac_addr - Get SAN MAC address
|
|
* @hw: pointer to hardware structure
|
|
* @san_mac_addr: SAN MAC address
|
|
*
|
|
* Reads the SAN MAC address from the EEPROM, if it's available. This is
|
|
* per-port, so set_lan_id() must be called before reading the addresses.
|
|
**/
|
|
s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr,
|
|
(hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_san_mac_addr - Write a SAN MAC address
|
|
* @hw: pointer to hardware structure
|
|
* @san_mac_addr: SAN MAC address
|
|
*
|
|
* Writes A SAN MAC address to the EEPROM.
|
|
**/
|
|
s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr,
|
|
(hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_device_caps - Get additional device capabilities
|
|
* @hw: pointer to hardware structure
|
|
* @device_caps: the EEPROM word for device capabilities
|
|
*
|
|
* Reads the extra device capabilities from the EEPROM
|
|
**/
|
|
s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_device_caps,
|
|
(hw, device_caps), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @wwnn_prefix: the alternative WWNN prefix
|
|
* @wwpn_prefix: the alternative WWPN prefix
|
|
*
|
|
* This function will read the EEPROM from the alternative SAN MAC address
|
|
* block to check the support for the alternative WWNN/WWPN prefix support.
|
|
**/
|
|
s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
|
|
u16 *wwpn_prefix)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix,
|
|
(hw, wwnn_prefix, wwpn_prefix),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @bs: the fcoe boot status
|
|
*
|
|
* This function will read the FCOE boot status from the iSCSI FCOE block
|
|
**/
|
|
s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status,
|
|
(hw, bs),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_bus_info - Set PCI bus info
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
|
|
**/
|
|
s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_num_of_tx_queues - Get Tx queues
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Returns the number of transmit queues for the given adapter.
|
|
**/
|
|
u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
|
|
{
|
|
return hw->mac.max_tx_queues;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_num_of_rx_queues - Get Rx queues
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Returns the number of receive queues for the given adapter.
|
|
**/
|
|
u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
|
|
{
|
|
return hw->mac.max_rx_queues;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_stop_adapter - Disable Rx/Tx units
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
|
|
* disables transmit and receive units. The adapter_stopped flag is used by
|
|
* the shared code and drivers to determine if the adapter is in a stopped
|
|
* state and should not touch the hardware.
|
|
**/
|
|
s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_pba_string - Reads part number string from EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @pba_num: stores the part number string from the EEPROM
|
|
* @pba_num_size: part number string buffer length
|
|
*
|
|
* Reads the part number string from the EEPROM.
|
|
**/
|
|
s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size)
|
|
{
|
|
return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_pba_num - Reads part number from EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @pba_num: stores the part number from the EEPROM
|
|
*
|
|
* Reads the part number from the EEPROM.
|
|
**/
|
|
s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num)
|
|
{
|
|
return ixgbe_read_pba_num_generic(hw, pba_num);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_identify_phy - Get PHY type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines the physical layer module found on the current adapter.
|
|
**/
|
|
s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
|
|
if (hw->phy.type == ixgbe_phy_unknown) {
|
|
status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_phy - Perform a PHY reset
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
|
|
if (hw->phy.type == ixgbe_phy_unknown) {
|
|
if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS)
|
|
status = IXGBE_ERR_PHY;
|
|
}
|
|
|
|
if (status == IXGBE_SUCCESS) {
|
|
status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_firmware_version -
|
|
* @hw: pointer to hardware structure
|
|
* @firmware_version: pointer to firmware version
|
|
**/
|
|
s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
|
|
status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version,
|
|
(hw, firmware_version),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_phy_reg - Read PHY register
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit address of PHY register to read
|
|
* @device_type: type of device you want to communicate with
|
|
* @phy_data: Pointer to read data from PHY register
|
|
*
|
|
* Reads a value from a specified PHY register
|
|
**/
|
|
s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
|
|
u16 *phy_data)
|
|
{
|
|
if (hw->phy.id == 0)
|
|
ixgbe_identify_phy(hw);
|
|
|
|
return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr,
|
|
device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_phy_reg - Write PHY register
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit PHY register to write
|
|
* @device_type: type of device you want to communicate with
|
|
* @phy_data: Data to write to the PHY register
|
|
*
|
|
* Writes a value to specified PHY register
|
|
**/
|
|
s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
|
|
u16 phy_data)
|
|
{
|
|
if (hw->phy.id == 0)
|
|
ixgbe_identify_phy(hw);
|
|
|
|
return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr,
|
|
device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link - Restart PHY autoneg
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Restart autonegotiation and PHY and waits for completion.
|
|
**/
|
|
s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_internal_phy - Configure integrated PHY
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Reconfigure the integrated PHY in order to enable talk to the external PHY.
|
|
* Returns success if not implemented, since nothing needs to be done in this
|
|
* case.
|
|
*/
|
|
s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.setup_internal_link, (hw),
|
|
IXGBE_SUCCESS);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_phy_link - Determine link and speed status
|
|
* @hw: pointer to hardware structure
|
|
* @speed: link speed
|
|
* @link_up: TRUE when link is up
|
|
*
|
|
* Reads a PHY register to determine if link is up and the current speed for
|
|
* the PHY.
|
|
**/
|
|
s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
|
bool *link_up)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed,
|
|
link_up), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_speed - Set auto advertise
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg_wait_to_complete: TRUE when waiting for completion is needed
|
|
*
|
|
* Sets the auto advertised capabilities
|
|
**/
|
|
s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed,
|
|
autoneg_wait_to_complete),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_phy_power - Control the phy power state
|
|
* @hw: pointer to hardware structure
|
|
* @on: TRUE for on, FALSE for off
|
|
*/
|
|
s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.set_phy_power, (hw, on),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_link - Get link and speed status
|
|
* @hw: pointer to hardware structure
|
|
* @speed: pointer to link speed
|
|
* @link_up: TRUE when link is up
|
|
* @link_up_wait_to_complete: bool used to wait for link up or not
|
|
*
|
|
* Reads the links register to determine if link is up and the current speed
|
|
**/
|
|
s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
|
bool *link_up, bool link_up_wait_to_complete)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed,
|
|
link_up, link_up_wait_to_complete),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_disable_tx_laser - Disable Tx laser
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* If the driver needs to disable the laser on SFI optics.
|
|
**/
|
|
void ixgbe_disable_tx_laser(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.disable_tx_laser)
|
|
hw->mac.ops.disable_tx_laser(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_enable_tx_laser - Enable Tx laser
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* If the driver needs to enable the laser on SFI optics.
|
|
**/
|
|
void ixgbe_enable_tx_laser(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.enable_tx_laser)
|
|
hw->mac.ops.enable_tx_laser(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_flap_tx_laser - flap Tx laser to start autotry process
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* When the driver changes the link speeds that it can support then
|
|
* flap the tx laser to alert the link partner to start autotry
|
|
* process on its end.
|
|
**/
|
|
void ixgbe_flap_tx_laser(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.flap_tx_laser)
|
|
hw->mac.ops.flap_tx_laser(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_link - Set link speed
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg_wait_to_complete: TRUE when waiting for completion is needed
|
|
*
|
|
* Configures link settings. Restarts the link.
|
|
* Performs autonegotiation if needed.
|
|
**/
|
|
s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed,
|
|
autoneg_wait_to_complete),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_mac_link - Set link speed
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg_wait_to_complete: TRUE when waiting for completion is needed
|
|
*
|
|
* Configures link settings. Restarts the link.
|
|
* Performs autonegotiation if needed.
|
|
**/
|
|
s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.setup_mac_link, (hw, speed,
|
|
autoneg_wait_to_complete),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_link_capabilities - Returns link capabilities
|
|
* @hw: pointer to hardware structure
|
|
* @speed: link speed capabilities
|
|
* @autoneg: TRUE when autoneg or autotry is enabled
|
|
*
|
|
* Determines the link capabilities of the current configuration.
|
|
**/
|
|
s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
|
bool *autoneg)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw,
|
|
speed, autoneg), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_led_on - Turn on LEDs
|
|
* @hw: pointer to hardware structure
|
|
* @index: led number to turn on
|
|
*
|
|
* Turns on the software controllable LEDs.
|
|
**/
|
|
s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_led_off - Turn off LEDs
|
|
* @hw: pointer to hardware structure
|
|
* @index: led number to turn off
|
|
*
|
|
* Turns off the software controllable LEDs.
|
|
**/
|
|
s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_blink_led_start - Blink LEDs
|
|
* @hw: pointer to hardware structure
|
|
* @index: led number to blink
|
|
*
|
|
* Blink LED based on index.
|
|
**/
|
|
s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_blink_led_stop - Stop blinking LEDs
|
|
* @hw: pointer to hardware structure
|
|
* @index: led number to stop
|
|
*
|
|
* Stop blinking LED based on index.
|
|
**/
|
|
s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_eeprom_params - Initialize EEPROM parameters
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
|
|
* ixgbe_hw struct in order to set up EEPROM access.
|
|
**/
|
|
s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
|
|
/**
|
|
* ixgbe_write_eeprom - Write word to EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @offset: offset within the EEPROM to be written to
|
|
* @data: 16 bit word to be written to the EEPROM
|
|
*
|
|
* Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
|
|
* called after this function, the EEPROM will most likely contain an
|
|
* invalid checksum.
|
|
**/
|
|
s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_eeprom_buffer - Write word(s) to EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @offset: offset within the EEPROM to be written to
|
|
* @data: 16 bit word(s) to be written to the EEPROM
|
|
* @words: number of words
|
|
*
|
|
* Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not
|
|
* called after this function, the EEPROM will most likely contain an
|
|
* invalid checksum.
|
|
**/
|
|
s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words,
|
|
u16 *data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer,
|
|
(hw, offset, words, data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_eeprom - Read word from EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @offset: offset within the EEPROM to be read
|
|
* @data: read 16 bit value from EEPROM
|
|
*
|
|
* Reads 16 bit value from EEPROM
|
|
**/
|
|
s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_eeprom_buffer - Read word(s) from EEPROM
|
|
* @hw: pointer to hardware structure
|
|
* @offset: offset within the EEPROM to be read
|
|
* @data: read 16 bit word(s) from EEPROM
|
|
* @words: number of words
|
|
*
|
|
* Reads 16 bit word(s) from EEPROM
|
|
**/
|
|
s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset,
|
|
u16 words, u16 *data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer,
|
|
(hw, offset, words, data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
|
|
* @hw: pointer to hardware structure
|
|
* @checksum_val: calculated checksum
|
|
*
|
|
* Performs checksum calculation and validates the EEPROM checksum
|
|
**/
|
|
s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
|
|
{
|
|
return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum,
|
|
(hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_insert_mac_addr - Find a RAR for this mac address
|
|
* @hw: pointer to hardware structure
|
|
* @addr: Address to put into receive address register
|
|
* @vmdq: VMDq pool to assign
|
|
*
|
|
* Puts an ethernet address into a receive address register, or
|
|
* finds the rar that it is already in; adds to the pool list
|
|
**/
|
|
s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr,
|
|
(hw, addr, vmdq),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_rar - Set Rx address register
|
|
* @hw: pointer to hardware structure
|
|
* @index: Receive address register to write
|
|
* @addr: Address to put into receive address register
|
|
* @vmdq: VMDq "set"
|
|
* @enable_addr: set flag that address is active
|
|
*
|
|
* Puts an ethernet address into a receive address register.
|
|
**/
|
|
s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
|
|
u32 enable_addr)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq,
|
|
enable_addr), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clear_rar - Clear Rx address register
|
|
* @hw: pointer to hardware structure
|
|
* @index: Receive address register to write
|
|
*
|
|
* Puts an ethernet address into a receive address register.
|
|
**/
|
|
s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_vmdq - Associate a VMDq index with a receive address
|
|
* @hw: pointer to hardware structure
|
|
* @rar: receive address register index to associate with VMDq index
|
|
* @vmdq: VMDq set or pool index
|
|
**/
|
|
s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address
|
|
* @hw: pointer to hardware structure
|
|
* @vmdq: VMDq default pool index
|
|
**/
|
|
s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac,
|
|
(hw, vmdq), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address
|
|
* @hw: pointer to hardware structure
|
|
* @rar: receive address register index to disassociate with VMDq index
|
|
* @vmdq: VMDq set or pool index
|
|
**/
|
|
s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_rx_addrs - Initializes receive address filters.
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Places the MAC address in receive address register 0 and clears the rest
|
|
* of the receive address registers. Clears the multicast table. Assumes
|
|
* the receiver is in reset when the routine is called.
|
|
**/
|
|
s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
|
|
{
|
|
return hw->mac.num_rar_entries;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses
|
|
* @hw: pointer to hardware structure
|
|
* @addr_list: the list of new multicast addresses
|
|
* @addr_count: number of addresses
|
|
* @func: iterator function to walk the multicast address list
|
|
*
|
|
* The given list replaces any existing list. Clears the secondary addrs from
|
|
* receive address registers. Uses unused receive address registers for the
|
|
* first secondary addresses, and falls back to promiscuous mode as needed.
|
|
**/
|
|
s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
|
|
u32 addr_count, ixgbe_mc_addr_itr func)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw,
|
|
addr_list, addr_count, func),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
|
|
* @hw: pointer to hardware structure
|
|
* @mc_addr_list: the list of new multicast addresses
|
|
* @mc_addr_count: number of addresses
|
|
* @func: iterator function to walk the multicast address list
|
|
* @clear: flag, when set clears the table beforehand
|
|
*
|
|
* The given list replaces any existing list. Clears the MC addrs from receive
|
|
* address registers and the multicast table. Uses unused receive address
|
|
* registers for the first multicast addresses, and hashes the rest into the
|
|
* multicast table.
|
|
**/
|
|
s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
|
|
u32 mc_addr_count, ixgbe_mc_addr_itr func,
|
|
bool clear)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw,
|
|
mc_addr_list, mc_addr_count, func, clear),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_enable_mc - Enable multicast address in RAR
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Enables multicast address in RAR and the use of the multicast hash table.
|
|
**/
|
|
s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_disable_mc - Disable multicast address in RAR
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Disables multicast address in RAR and the use of the multicast hash table.
|
|
**/
|
|
s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clear_vfta - Clear VLAN filter table
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Clears the VLAN filer table, and the VMDq index associated with the filter
|
|
**/
|
|
s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_vfta - Set VLAN filter table
|
|
* @hw: pointer to hardware structure
|
|
* @vlan: VLAN id to write to VLAN filter
|
|
* @vind: VMDq output index that maps queue to VLAN id in VLVFB
|
|
* @vlan_on: boolean flag to turn on/off VLAN
|
|
* @vlvf_bypass: boolean flag indicating updating the default pool is okay
|
|
*
|
|
* Turn on/off specified VLAN in the VLAN filter table.
|
|
**/
|
|
s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
|
|
bool vlvf_bypass)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind,
|
|
vlan_on, vlvf_bypass), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_vlvf - Set VLAN Pool Filter
|
|
* @hw: pointer to hardware structure
|
|
* @vlan: VLAN id to write to VLAN filter
|
|
* @vind: VMDq output index that maps queue to VLAN id in VLVFB
|
|
* @vlan_on: boolean flag to turn on/off VLAN in VLVF
|
|
* @vfta_delta: pointer to the difference between the current value of VFTA
|
|
* and the desired value
|
|
* @vfta: the desired value of the VFTA
|
|
* @vlvf_bypass: boolean flag indicating updating the default pool is okay
|
|
*
|
|
* Turn on/off specified bit in VLVF table.
|
|
**/
|
|
s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on,
|
|
u32 *vfta_delta, u32 vfta, bool vlvf_bypass)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind,
|
|
vlan_on, vfta_delta, vfta, vlvf_bypass),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_fc_enable - Enable flow control
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Configures the flow control settings based on SW configuration.
|
|
**/
|
|
s32 ixgbe_fc_enable(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_fc - Set up flow control
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Called at init time to set up flow control.
|
|
**/
|
|
s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.setup_fc, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_fw_drv_ver - Try to send the driver version number FW
|
|
* @hw: pointer to hardware structure
|
|
* @maj: driver major number to be sent to firmware
|
|
* @min: driver minor number to be sent to firmware
|
|
* @build: driver build number to be sent to firmware
|
|
* @ver: driver version number to be sent to firmware
|
|
* @len: length of driver_ver string
|
|
* @driver_ver: driver string
|
|
**/
|
|
s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
|
|
u8 ver, u16 len, char *driver_ver)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
|
|
build, ver, len, driver_ver),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
* ixgbe_dmac_config - Configure DMA Coalescing registers.
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Configure DMA coalescing. If enabling dmac, dmac is activated.
|
|
* When disabling dmac, dmac enable dmac bit is cleared.
|
|
**/
|
|
s32 ixgbe_dmac_config(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Disables dmac, updates per TC settings, and then enable dmac.
|
|
**/
|
|
s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Configure DMA coalescing threshold per TC and set high priority bit for
|
|
* FCOE TC. The dmac enable bit must be cleared before configuring.
|
|
**/
|
|
s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_eee - Enable/disable EEE support
|
|
* @hw: pointer to the HW structure
|
|
* @enable_eee: boolean flag to enable EEE
|
|
*
|
|
* Enable/disable EEE based on enable_ee flag.
|
|
* Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
|
|
* are modified.
|
|
*
|
|
**/
|
|
s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_source_address_pruning - Enable/Disable source address pruning
|
|
* @hw: pointer to hardware structure
|
|
* @enable: enable or disable source address pruning
|
|
* @pool: Rx pool - Rx pool to toggle source address pruning
|
|
**/
|
|
void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
|
|
unsigned int pool)
|
|
{
|
|
if (hw->mac.ops.set_source_address_pruning)
|
|
hw->mac.ops.set_source_address_pruning(hw, enable, pool);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
|
|
* @hw: pointer to hardware structure
|
|
* @enable: enable or disable switch for Ethertype anti-spoofing
|
|
* @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
|
|
*
|
|
**/
|
|
void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
|
|
{
|
|
if (hw->mac.ops.set_ethertype_anti_spoofing)
|
|
hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit address of PHY register to read
|
|
* @device_type: type of device you want to communicate with
|
|
* @phy_data: Pointer to read data from PHY register
|
|
*
|
|
* Reads a value from a specified PHY register
|
|
**/
|
|
s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u32 *phy_data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr,
|
|
device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit PHY register to write
|
|
* @device_type: type of device you want to communicate with
|
|
* @phy_data: Data to write to the PHY register
|
|
*
|
|
* Writes a value to specified PHY register
|
|
**/
|
|
s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u32 phy_data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr,
|
|
device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_disable_mdd - Disable malicious driver detection
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
void ixgbe_disable_mdd(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.disable_mdd)
|
|
hw->mac.ops.disable_mdd(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_enable_mdd - Enable malicious driver detection
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
void ixgbe_enable_mdd(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.enable_mdd)
|
|
hw->mac.ops.enable_mdd(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_mdd_event - Handle malicious driver detection event
|
|
* @hw: pointer to hardware structure
|
|
* @vf_bitmap: vf bitmap of malicious vfs
|
|
*
|
|
**/
|
|
void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap)
|
|
{
|
|
if (hw->mac.ops.mdd_event)
|
|
hw->mac.ops.mdd_event(hw, vf_bitmap);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
|
|
* detection event
|
|
* @hw: pointer to hardware structure
|
|
* @vf: vf index
|
|
*
|
|
**/
|
|
void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf)
|
|
{
|
|
if (hw->mac.ops.restore_mdd_vf)
|
|
hw->mac.ops.restore_mdd_vf(hw, vf);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_enter_lplu - Transition to low power states
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Configures Low Power Link Up on transition to low power states
|
|
* (from D0 to non-D0).
|
|
**/
|
|
s32 ixgbe_enter_lplu(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.enter_lplu, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_handle_lasi - Handle external Base T PHY interrupt
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Handle external Base T PHY interrupt. If high temperature
|
|
* failure alarm then return error, else if link status change
|
|
* then setup internal/external PHY link
|
|
*
|
|
* Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
|
|
* failure alarm, else return PHY access status.
|
|
*/
|
|
s32 ixgbe_handle_lasi(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.handle_lasi, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_bypass_rw - Bit bang data into by_pass FW
|
|
* @hw: pointer to hardware structure
|
|
* @cmd: Command we send to the FW
|
|
* @status: The reply from the FW
|
|
*
|
|
* Bit-bangs the cmd to the by_pass FW status points to what is returned.
|
|
**/
|
|
s32 ixgbe_bypass_rw(struct ixgbe_hw *hw, u32 cmd, u32 *status)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.bypass_rw, (hw, cmd, status),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_bypass_valid_rd - Verify valid return from bit-bang.
|
|
*
|
|
* If we send a write we can't be sure it took until we can read back
|
|
* that same register. It can be a problem as some of the feilds may
|
|
* for valid reasons change inbetween the time wrote the register and
|
|
* we read it again to verify. So this function check everything we
|
|
* can check and then assumes it worked.
|
|
*
|
|
* @u32 in_reg - The register cmd for the bit-bang read.
|
|
* @u32 out_reg - The register returned from a bit-bang read.
|
|
**/
|
|
bool ixgbe_bypass_valid_rd(struct ixgbe_hw *hw, u32 in_reg, u32 out_reg)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.bypass_valid_rd,
|
|
(in_reg, out_reg), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_bypass_set - Set a bypass field in the FW CTRL Regiter.
|
|
* @hw: pointer to hardware structure
|
|
* @cmd: The control word we are setting.
|
|
* @event: The event we are setting in the FW. This also happens to
|
|
* be the mask for the event we are setting (handy)
|
|
* @action: The action we set the event to in the FW. This is in a
|
|
* bit field that happens to be what we want to put in
|
|
* the event spot (also handy)
|
|
*
|
|
* Writes to the cmd control the bits in actions.
|
|
**/
|
|
s32 ixgbe_bypass_set(struct ixgbe_hw *hw, u32 cmd, u32 event, u32 action)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.bypass_set,
|
|
(hw, cmd, event, action),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_bypass_rd_eep - Read the bypass FW eeprom address
|
|
* @hw: pointer to hardware structure
|
|
* @addr: The bypass eeprom address to read.
|
|
* @value: The 8b of data at the address above.
|
|
**/
|
|
s32 ixgbe_bypass_rd_eep(struct ixgbe_hw *hw, u32 addr, u8 *value)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.bypass_rd_eep,
|
|
(hw, addr, value), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_analog_reg8 - Reads 8 bit analog register
|
|
* @hw: pointer to hardware structure
|
|
* @reg: analog register to read
|
|
* @val: read value
|
|
*
|
|
* Performs write operation to analog register specified.
|
|
**/
|
|
s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg,
|
|
val), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_analog_reg8 - Writes 8 bit analog register
|
|
* @hw: pointer to hardware structure
|
|
* @reg: analog register to write
|
|
* @val: value to write
|
|
*
|
|
* Performs write operation to Atlas analog register specified.
|
|
**/
|
|
s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg,
|
|
val), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_uta_tables - Initializes Unicast Table Arrays.
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Initializes the Unicast Table Arrays to zero on device load. This
|
|
* is part of the Rx init addr execution path.
|
|
**/
|
|
s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to read
|
|
* @dev_addr: I2C bus address to read from
|
|
* @data: value read
|
|
*
|
|
* Performs byte read operation to SFP module's EEPROM over I2C interface.
|
|
**/
|
|
s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
|
|
u8 *data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset,
|
|
dev_addr, data), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to read
|
|
* @dev_addr: I2C bus address to read from
|
|
* @data: value read
|
|
*
|
|
* Performs byte read operation to SFP module's EEPROM over I2C interface.
|
|
**/
|
|
s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 *data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte_unlocked,
|
|
(hw, byte_offset, dev_addr, data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_link - Perform read operation on link device
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: bus address to read from
|
|
* @reg: device register to read from
|
|
* @val: pointer to location to receive read value
|
|
*
|
|
* Returns an error code on error.
|
|
*/
|
|
s32 ixgbe_read_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
|
|
{
|
|
return ixgbe_call_func(hw, hw->link.ops.read_link, (hw, addr,
|
|
reg, val), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_link_unlocked - Perform read operation on link device
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: bus address to read from
|
|
* @reg: device register to read from
|
|
* @val: pointer to location to receive read value
|
|
*
|
|
* Returns an error code on error.
|
|
**/
|
|
s32 ixgbe_read_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val)
|
|
{
|
|
return ixgbe_call_func(hw, hw->link.ops.read_link_unlocked,
|
|
(hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_byte - Writes 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to write
|
|
* @dev_addr: I2C bus address to write to
|
|
* @data: value to write
|
|
*
|
|
* Performs byte write operation to SFP module's EEPROM over I2C interface
|
|
* at a specified device address.
|
|
**/
|
|
s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr,
|
|
u8 data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset,
|
|
dev_addr, data), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to write
|
|
* @dev_addr: I2C bus address to write to
|
|
* @data: value to write
|
|
*
|
|
* Performs byte write operation to SFP module's EEPROM over I2C interface
|
|
* at a specified device address.
|
|
**/
|
|
s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte_unlocked,
|
|
(hw, byte_offset, dev_addr, data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_link - Perform write operation on link device
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: bus address to write to
|
|
* @reg: device register to write to
|
|
* @val: value to write
|
|
*
|
|
* Returns an error code on error.
|
|
*/
|
|
s32 ixgbe_write_link(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
|
|
{
|
|
return ixgbe_call_func(hw, hw->link.ops.write_link,
|
|
(hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_link_unlocked - Perform write operation on link device
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: bus address to write to
|
|
* @reg: device register to write to
|
|
* @val: value to write
|
|
*
|
|
* Returns an error code on error.
|
|
**/
|
|
s32 ixgbe_write_link_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val)
|
|
{
|
|
return ixgbe_call_func(hw, hw->link.ops.write_link_unlocked,
|
|
(hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: EEPROM byte offset to write
|
|
* @eeprom_data: value to write
|
|
*
|
|
* Performs byte write operation to SFP module's EEPROM over I2C interface.
|
|
**/
|
|
s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw,
|
|
u8 byte_offset, u8 eeprom_data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom,
|
|
(hw, byte_offset, eeprom_data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: EEPROM byte offset to read
|
|
* @eeprom_data: value read
|
|
*
|
|
* Performs byte read operation to SFP module's EEPROM over I2C interface.
|
|
**/
|
|
s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data)
|
|
{
|
|
return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom,
|
|
(hw, byte_offset, eeprom_data),
|
|
IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_supported_physical_layer - Returns physical layer type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines physical layer capabilities of the current configuration.
|
|
**/
|
|
u64 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
|
|
(hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics
|
|
* @hw: pointer to hardware structure
|
|
* @regval: bitfield to write to the Rx DMA register
|
|
*
|
|
* Enables the Rx DMA unit of the device.
|
|
**/
|
|
s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma,
|
|
(hw, regval), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_disable_sec_rx_path - Stops the receive data path
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Stops the receive data path.
|
|
**/
|
|
s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path,
|
|
(hw), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_enable_sec_rx_path - Enables the receive data path
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Enables the receive data path.
|
|
**/
|
|
s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path,
|
|
(hw), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore
|
|
* @hw: pointer to hardware structure
|
|
* @mask: Mask to specify which semaphore to acquire
|
|
*
|
|
* Acquires the SWFW semaphore through SW_FW_SYNC register for the specified
|
|
* function (CSR, PHY0, PHY1, EEPROM, Flash)
|
|
**/
|
|
s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
|
|
{
|
|
return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync,
|
|
(hw, mask), IXGBE_NOT_IMPLEMENTED);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_release_swfw_semaphore - Release SWFW semaphore
|
|
* @hw: pointer to hardware structure
|
|
* @mask: Mask to specify which semaphore to release
|
|
*
|
|
* Releases the SWFW semaphore through SW_FW_SYNC register for the specified
|
|
* function (CSR, PHY0, PHY1, EEPROM, Flash)
|
|
**/
|
|
void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask)
|
|
{
|
|
if (hw->mac.ops.release_swfw_sync)
|
|
hw->mac.ops.release_swfw_sync(hw, mask);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_swfw_semaphore - Clean up SWFW semaphore
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Attempts to acquire the SWFW semaphore through SW_FW_SYNC register.
|
|
* Regardless of whether is succeeds or not it then release the semaphore.
|
|
* This is function is called to recover from catastrophic failures that
|
|
* may have left the semaphore locked.
|
|
**/
|
|
void ixgbe_init_swfw_semaphore(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.init_swfw_sync)
|
|
hw->mac.ops.init_swfw_sync(hw);
|
|
}
|
|
|
|
|
|
void ixgbe_disable_rx(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.disable_rx)
|
|
hw->mac.ops.disable_rx(hw);
|
|
}
|
|
|
|
void ixgbe_enable_rx(struct ixgbe_hw *hw)
|
|
{
|
|
if (hw->mac.ops.enable_rx)
|
|
hw->mac.ops.enable_rx(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_rate_select_speed - Set module link speed
|
|
* @hw: pointer to hardware structure
|
|
* @speed: link speed to set
|
|
*
|
|
* Set module link speed via the rate select.
|
|
*/
|
|
void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
|
|
{
|
|
if (hw->mac.ops.set_rate_select_speed)
|
|
hw->mac.ops.set_rate_select_speed(hw, speed);
|
|
}
|