d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0249823ecb
freebsd-dev/sys/dev/aic7xxx/aic7xxx_osm.h
Justin T. Gibbs b3b25f2cbf ahc_eisa.c: 
ahc_pci.c:
ahd_pci.c:
aic7xxx.c:
aic79xx.c:
aic_osm_lib.c:
aic_osm_lib.h:
	Use common OSM routines from aic_osm_lib for bus dma operations,
	delay routines, accessing CCBs, byte swapping, etc.

aic7xxx_pci.c:
	Provide a better description for the 2915/30LP on attach.

aic7xxx.c:
aic79xx.c:
aic7770.c:
aic79xx_pci.c:
aic7xxx_pci.c:
aic7xxx_93cx6.c:
	Move FBSDID behind an ifdef so that these core files will
	still compile under other OSes.

aic79xx.h:
aic79xx_pci.c:
aic79xx.seq:
	To speed up non-packetized CDB delivery in Rev B, all CDB
	acks are "released" to the output sync as soon as the
	command phase starts.  There is only one problem with this
	approach.  If the target changes phase before all data are
	sent, we have left over acks that can go out on the bus in
	a data phase.  Due to other chip contraints, this only
	happens if the target goes to data-in, but if the acks go
	out before we can test SDONE, we'll think that the transfer
	has completed successfully.  Work around this by taking
	advantage of the 400ns or 800ns dead time between command
	phase and the REQ of the new phase.  If the transfer has
	completed successfully, SCSIEN should fall *long* before we
	see a phase change.  We thus treat any phasemiss that
	occurs before SCSIEN falls as an incomplete transfer.

	aic79xx.h:
		Add the AHD_FAST_CDB_DELIVERY feature.

	aic79xx_pci.c:
		Set AHD_FAST_CDB_DELIVERY for all Rev. B parts.

	aic79xx.seq:
		Test for PHASEMIS in the command phase for
		all AHD_FAST_CDB_DELIVERY controlelrs.

ahd_pci.c:
ahc_pci.c:
aic7xxx.h:
aic79xx.h:
	Move definition of controller BAR offsets to core header files.

aic7xxx.c:
aic79xx.c:
	In the softc free routine, leave removal of a softc from the
	global list of softcs to the OSM (the caller of this routine).
	This allows us to avoid holding the softc list_lock during device
	destruction where we may have to sleep waiting for our recovery
	thread to halt.

ahc_pci.c:
	Use ahc_pci_test_register access to validate I/O mapped in
	addition to the tests already performed for memory mapped
	access.

	Remove unused ahc_power_state_change() function.  The PCI
	layer in both 4.X and 5.X now offer this functionality.

ahd_pci.c:
	Remove reduntant definition of controller BAR offsets.  These
	are also defined in aic79xx.h.

	Remove unused ahd_power_state_change() function.  The PCI
	layer in both 4.X and 5.X now offer this functionality.

aic7xxx.c:
aic79xx.c:
aic79xx.h:
aic7xxx.h:
aic7xxx_osm.c:
aic79xx_osm.c:
	Move timeout handling to the driver cores.  In the case
	of the aic79xx driver, the algorithm has been enhanced
	to try target resets before performing a bus reset.  For
	the aic7xxx driver, the algorithm is unchanged.  Although
	the drivers do not currently sleep during recovery (recovery
	is timeout driven), the cores do expect all processing to
	be performed via a recovery thread.  Our timeout handlers
	are now little stubs that wakeup the recovery thread.

aic79xx.c:
aic79xx.h:
aic79xx_inline.h:
	Change shared_data allocation to use a map_node so
	that the sentinel hscb can use this map node in
	ahd_swap_with_next_hscb.  This routine now swaps
	the hscb_map pointer in additon to the hscb
	contents so that any sync operations occur on
	the correct map.

	physaddr -> busaddr

	Pointed out by: Jason Thorpe <thorpej@wasabisystems.com>

aic79xx.c:
	Make more use of the in/out/w/l/q macros for accessing
	byte registers in the chip.

	Correct some issues in the ahd_flush_qoutfifo() routine.
	    o Run the qoutfifo only once the command channel
	      DMA engine has been halted.  This closes a window
	      where we might have missed some entries.
	    o Change ahd_run_data_fifo() to not loop to completion.
	      If we happen to start on the wrong FIFO and the other
	      FIFO has a snapshot savepointers, we might deadlock.
	      This required our delay between FIFO tests to be
	      moved to the ahd_flush_qoutfifo() routine.
	    o Update/add comments.
	    o Remove spurious test for COMPLETE_DMA list being empty
	      when completing transactions from the GSFIFO with
	      residuals.  The SCB must be put on the COMPLETE_DMA
	      scb list unconditionally.
	    o When halting command channel DMA activity, we must
	      disable the DMA channel in all cases but an update
	      of the QOUTFIFO.  The latter case is required so
	      that the sequencer will update its position in the
	      QOUTFIFO.  Previously, we left the channel enabled
	      for all "push" DMAs.  This left us vulnerable to
	      the sequencer handling an SCB push long after that
	      SCB was already processed manually by this routine.
	    o Correct the polarity of tests involving
	      ahd_scb_active_in_fifo().  This routine returns
	      non-zero for true.

	Return to processing bad status completions through
	the qoutfifo.  This reduces the time that the sequencer
	is kept paused when handling transactions with bad
	status or underruns.

	When waiting for the controller to quiece selections,
	add a delay to our loop.  Otherwise we may fail to wait
	long enough for the sequencer to comply.

	On H2A4 hardware, use the slow slewrate for non-paced
	transfers.  This mirrors what the Adaptec Windows
	drivers do.

	On the Rev B. only slow down the CRC timing for
	older U160 devices that might need the slower timing.
	We define "older" as devices that do not support
	packetized protocol.

	Wait up to 5000 * 5us for the SEEPROM to become unbusy.
	Write ops seem to take much longer than read ops.

aic79xx.seq:
	For controllers with the FAINT_LED bug, turn the diagnostic
	led feature on during selection and reselection.  This covers
	the non-packetized case.  The LED will be disabled for
	non-packetized transfers once we return to the top level idle
	loop.  Add more comments about the busy LED workaround.

	Extend a critical section around the entire
	command channel idle loop process.  Previously
	the portion of this handler that directly manipulated
	the linked list of completed SCBs was not protected.
	This is the likely cause of the recent reports of
	commands being completed twice by the driver.

	Extend critical sections across the test for,
	and the longjump to, longjump routines.  This
	prevents the firmware from trying to jump to
	a longjmp handler that was just cleared by the
	host.

	Improve the locations of several critical section
	begin and end points.  Typically these changes
	remove instructions that did not need to be
	inside a critical section.

	Close the "busfree after selection, but before busfree
	interrupts can be enabled" race to just a single sequencer
	instruction.  We now test the BSY line explicitly before
	clearing the busfree status and enabling the busfree
	interrupt.

	Close a race condition in the processing of HS_MAILBOX
	updates.  We now clear the "updated" status before the
	copy.  This ensures that we don't accidentally clear
	the status incorrectly when the host sneaks in an update
	just after our last copy, but before we clear the status.
	This race has never been observed.

	Don't re-enable SCSIEN if we lose the race to disable SCSIEN
	in our interrupt handler's workaround for the RevA data-valid
	too early issue.

aic79xx_inline.h:
	Add comments indicating that the order in which bytes are
	read or written in ahd_inw and ahd_outw is important.  This
	allows us to use these inlines when accessing registers with
	side-effects.

aic79xx_pci.c:
	The 29320 and the 29320B are 7902 not 7901 based products.
	Correct the driver banner.

aic7xxx.h:
	Enable the use of the auto-access pause feature
	on the aic7870 and aic7880.  It was disabled due
	to an oversight.

aic7xxx.reg:
	Move TARG_IMMEDIATE_SCB to alias LAST_MSG to
	avoid leaving garbage in MWI_RESIDUAL.  This
	prevents spurious overflows whn operating target
	mode on controllers that require the MWI_RESIDUAL
	work-around.

aic7xxx.seq:
	AHC_TMODE_WIDEODD_BUG is a bug, not a softc flag.
	Reference the correct softc field when testing
	for its presence.

	Set the NOT_IDENTIFIED and NO_CDB_SENT bits
	in SEQ_FLAGS to indicate that the nexus is
	invalid in await busfree.

aic7xxx_93cx6.c:
	Add support for the C56/C66 versions of the EWEN and EWDS
	commands.

aic7xxx.c:
aic7xxx_pci.c:
	Move test for the validity of left over BIOS data
	to ahc_test_register_access().  This guarantees that
	any left over CHIPRST value is not clobbered by our
	register access test and lost to the test that was
	in ahc_reset.
2003-12-17 00:02:10 +00:00

310 lines
9.6 KiB
C
Raw Blame History

/*
* FreeBSD platform specific driver option settings, data structures,
* function declarations and includes.
*
* Copyright (c) 1994-2001 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: //depot/aic7xxx/freebsd/dev/aic7xxx/aic7xxx_osm.h#18 $
*
* $FreeBSD$
*/
#ifndef _AIC7XXX_FREEBSD_H_
#define _AIC7XXX_FREEBSD_H_
#include <opt_aic7xxx.h> /* for config options */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h> /* For device_t */
#if __FreeBSD_version >= 500000
#include <sys/endian.h>
#endif
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/queue.h>
#if __FreeBSD_version < 500000
#include <pci.h>
#else
#define NPCI 1
#endif
#if NPCI > 0
#define AIC_PCI_CONFIG 1
#include <machine/bus_memio.h>
#endif
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/endian.h>
#include <machine/clock.h>
#include <machine/resource.h>
#include <sys/rman.h>
#if NPCI > 0
#if __FreeBSD_version >= 500000
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#else
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#endif
#endif
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_debug.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#ifdef CAM_NEW_TRAN_CODE
#define AHC_NEW_TRAN_SETTINGS
#endif /* CAM_NEW_TRAN_CODE */
/*************************** Attachment Bookkeeping ***************************/
extern devclass_t ahc_devclass;
/****************************** Platform Macros *******************************/
#define SIM_IS_SCSIBUS_B(ahc, sim) \
((sim) == ahc->platform_data->sim_b)
#define SIM_CHANNEL(ahc, sim) \
(((sim) == ahc->platform_data->sim_b) ? 'B' : 'A')
#define SIM_SCSI_ID(ahc, sim) \
(((sim) == ahc->platform_data->sim_b) ? ahc->our_id_b : ahc->our_id)
#define SIM_PATH(ahc, sim) \
(((sim) == ahc->platform_data->sim_b) ? ahc->platform_data->path_b \
: ahc->platform_data->path)
#define BUILD_SCSIID(ahc, sim, target_id, our_id) \
((((target_id) << TID_SHIFT) & TID) | (our_id) \
| (SIM_IS_SCSIBUS_B(ahc, sim) ? TWIN_CHNLB : 0))
#define SCB_GET_SIM(ahc, scb) \
(SCB_GET_CHANNEL(ahc, scb) == 'A' ? (ahc)->platform_data->sim \
: (ahc)->platform_data->sim_b)
#ifndef offsetof
#define offsetof(type, member) ((size_t)(&((type *)0)->member))
#endif
/************************ Tunable Driver Parameters **************************/
/*
* The number of dma segments supported. The sequencer can handle any number
* of physically contiguous S/G entrys. To reduce the driver's memory
* consumption, we limit the number supported to be sufficient to handle
* the largest mapping supported by the kernel, MAXPHYS. Assuming the
* transfer is as fragmented as possible and unaligned, this turns out to
* be the number of paged sized transfers in MAXPHYS plus an extra element
* to handle any unaligned residual. The sequencer fetches SG elements
* in cacheline sized chucks, so make the number per-transaction an even
* multiple of 16 which should align us on even the largest of cacheline
* boundaries.
*/
#define AHC_NSEG (roundup(btoc(MAXPHYS) + 1, 16))
/* This driver supports target mode */
#define AHC_TARGET_MODE 1
/************************** Softc/SCB Platform Data ***************************/
struct ahc_platform_data {
/*
* Hooks into the XPT.
*/
struct cam_sim *sim;
struct cam_sim *sim_b;
struct cam_path *path;
struct cam_path *path_b;
int regs_res_type;
int regs_res_id;
int irq_res_type;
struct resource *regs;
struct resource *irq;
void *ih;
eventhandler_tag eh;
struct proc *recovery_thread;
};
struct scb_platform_data {
};
/***************************** Core Includes **********************************/
#if AHC_REG_PRETTY_PRINT
#define AIC_DEBUG_REGISTERS 1
#else
#define AIC_DEBUG_REGISTERS 0
#endif
#define AIC_CORE_INCLUDE <dev/aic7xxx/aic7xxx.h>
#define AIC_LIB_PREFIX ahc
#define AIC_CONST_PREFIX AHC
#include <dev/aic7xxx/aic_osm_lib.h>
/*************************** Device Access ************************************/
#define ahc_inb(ahc, port) \
bus_space_read_1((ahc)->tag, (ahc)->bsh, port)
#define ahc_outb(ahc, port, value) \
bus_space_write_1((ahc)->tag, (ahc)->bsh, port, value)
#define ahc_outsb(ahc, port, valp, count) \
bus_space_write_multi_1((ahc)->tag, (ahc)->bsh, port, valp, count)
#define ahc_insb(ahc, port, valp, count) \
bus_space_read_multi_1((ahc)->tag, (ahc)->bsh, port, valp, count)
static __inline void ahc_flush_device_writes(struct ahc_softc *);
static __inline void
ahc_flush_device_writes(struct ahc_softc *ahc)
{
/* XXX Is this sufficient for all architectures??? */
ahc_inb(ahc, INTSTAT);
}
/**************************** Locking Primitives ******************************/
/* Lock protecting internal data structures */
static __inline void ahc_lockinit(struct ahc_softc *);
static __inline void ahc_lock(struct ahc_softc *, unsigned long *flags);
static __inline void ahc_unlock(struct ahc_softc *, unsigned long *flags);
/* Lock held during command compeletion to the upper layer */
static __inline void ahc_done_lockinit(struct ahc_softc *);
static __inline void ahc_done_lock(struct ahc_softc *, unsigned long *flags);
static __inline void ahc_done_unlock(struct ahc_softc *, unsigned long *flags);
/* Lock held during ahc_list manipulation and ahc softc frees */
static __inline void ahc_list_lockinit(void);
static __inline void ahc_list_lock(unsigned long *flags);
static __inline void ahc_list_unlock(unsigned long *flags);
static __inline void
ahc_lockinit(struct ahc_softc *ahc)
{
}
static __inline void
ahc_lock(struct ahc_softc *ahc, unsigned long *flags)
{
*flags = splcam();
}
static __inline void
ahc_unlock(struct ahc_softc *ahc, unsigned long *flags)
{
splx(*flags);
}
/* Lock held during command compeletion to the upper layer */
static __inline void
ahc_done_lockinit(struct ahc_softc *ahc)
{
}
static __inline void
ahc_done_lock(struct ahc_softc *ahc, unsigned long *flags)
{
}
static __inline void
ahc_done_unlock(struct ahc_softc *ahc, unsigned long *flags)
{
}
/* Lock held during ahc_list manipulation and ahc softc frees */
static __inline void
ahc_list_lockinit(void)
{
}
static __inline void
ahc_list_lock(unsigned long *flags)
{
}
static __inline void
ahc_list_unlock(unsigned long *flags)
{
}
/********************************** PCI ***************************************/
#ifdef AIC_PCI_CONFIG
int ahc_pci_map_registers(struct ahc_softc *ahc);
int ahc_pci_map_int(struct ahc_softc *ahc);
#endif /*AIC_PCI_CONFIG*/
/******************************** VL/EISA *************************************/
int aic7770_map_registers(struct ahc_softc *ahc, u_int port);
int aic7770_map_int(struct ahc_softc *ahc, int irq);
/********************************* Debug **************************************/
static __inline void ahc_print_path(struct ahc_softc *, struct scb *);
static __inline void ahc_platform_dump_card_state(struct ahc_softc *ahc);
static __inline void
ahc_print_path(struct ahc_softc *ahc, struct scb *scb)
{
xpt_print_path(scb->io_ctx->ccb_h.path);
}
static __inline void
ahc_platform_dump_card_state(struct ahc_softc *ahc)
{
/* Nothing to do here for FreeBSD */
}
/**************************** Transfer Settings *******************************/
void ahc_notify_xfer_settings_change(struct ahc_softc *,
struct ahc_devinfo *);
void ahc_platform_set_tags(struct ahc_softc *, struct ahc_devinfo *,
int /*enable*/);
/************************* Initialization/Teardown ****************************/
int ahc_platform_alloc(struct ahc_softc *ahc, void *platform_arg);
void ahc_platform_free(struct ahc_softc *ahc);
int ahc_map_int(struct ahc_softc *ahc);
int ahc_attach(struct ahc_softc *);
int ahc_softc_comp(struct ahc_softc *lahc, struct ahc_softc *rahc);
int ahc_detach(device_t);
/****************************** Interrupts ************************************/
void ahc_platform_intr(void *);
static __inline void ahc_platform_flushwork(struct ahc_softc *ahc);
static __inline void
ahc_platform_flushwork(struct ahc_softc *ahc)
{
}
/************************ Misc Function Declarations **************************/
void ahc_done(struct ahc_softc *ahc, struct scb *scb);
void ahc_send_async(struct ahc_softc *, char /*channel*/,
u_int /*target*/, u_int /*lun*/, ac_code, void *arg);
#endif /* _AIC7XXX_FREEBSD_H_ */
Reference in New Issue View Git Blame Copy Permalink