freebsd-dev/sys/dev/pccbb/pccbbvar.h
Warner Losh c92e45e4a1 Bulk changes made during the BSDcon kernel summit and travel afterwards.
Appologies for making this one bulk commit, but I have tested all these
changes together and don't want to break anything by trying to disentangle
it.

o Make debugging a sysctl/tunable
o Remove flags word from yenta chip info, it is unused
o Make 16-bit card I/O range and 32-bit card I/O range tunables
o Start the rename of pccbb to cbb to match NetBSD by misc renames.
o Kill the now bogus list of softcs to create kthread.  Instead, just
  create the kthread in the attach routine.
o Remove sc_ from some structure names.  It isn't needed.
o Refine chipset lookup code.
o Match generic PCI <-> CardBus bridges.  We specifically don't generically
  match PCI PCMCIA bridges because they are not, with one exception, yenta
  devices.
o Add some comments about the why we need to have a function table ala
  OLDCARD
o The PCI interrupt routing by using the ExCA registers is needed for
  for all bridges, per the spec, not just TI ones.
o Collapse TOPIC95 and TOPIC95B.
o Using the ToPIC 97 and 100 datasheets, try to support these bridges better,
  but more work is needed.
o Generally clarify some XXX comments and add them in a few places where
  things didn't look right to me.
o Move interrupt generating register access until after we establish an ISR.
o Add support for YV and XV cards.  X and Y are numbers to be determined
  later (but maybe never).
o factor powerup code for 16-bit and 32-bit cards.
o When a card supports more than one voltage, prefer the lowest supported
  volage.  Windows does this, and MS's design guides imply this is the
  right thing to do.
o Document race between kthread_exit(0) and kldunload's unmapping of pages
  that John Baldwin and I discovered.
o Debounce the CSC interrupt a little better.
o When a 16-bit card is inserted when we don't have a pccard child,
  warn about it better.  Ditto for 32-bit card.
o Ack ALL the interrupt bits that we get, not just 0x1.
o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00

107 lines
3.3 KiB
C

/*
* Copyright (c) 2000,2001 Jonathan Chen.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Structure definitions for the Cardbus Bridge driver
*/
struct intrhand {
void(*func)(void*arg);
void *arg;
STAILQ_ENTRY(intrhand) entries;
};
struct pccbb_reslist {
SLIST_ENTRY(pccbb_reslist) link;
struct resource *res;
int type;
int rid;
/* note: unlike the regular resource list, there can be
* duplicate rid's in the same list. However, the
* combination of rid and res->r_dev should be unique.
*/
bus_addr_t cardaddr; /* for 16-bit pccard memory */
};
#define PCCBB_AUTO_OPEN_SMALLHOLE 0x100
struct pccbb_softc {
device_t dev;
struct exca_softc exca;
struct resource *base_res;
struct resource *irq_res;
void *intrhand;
bus_space_tag_t bst;
bus_space_handle_t bsh;
u_int8_t secbus;
u_int8_t subbus;
struct mtx mtx;
u_int32_t flags;
#define PCCBB_16BIT_CARD 0x02000000
#define PCCBB_KTHREAD_RUNNING 0x04000000
#define PCCBB_KTHREAD_DONE 0x08000000
int chipset; /* chipset id */
#define CB_UNKNOWN 0 /* NOT Cardbus-PCI bridge */
#define CB_TI113X 1 /* TI PCI1130/1131 */
#define CB_TI12XX 2 /* TI PCI1250/1220 */
#define CB_RF5C47X 3 /* RICOH RF5C475/476/477 */
#define CB_RF5C46X 4 /* RICOH RF5C465/466/467 */
#define CB_CIRRUS 5 /* Cirrus Logic CLPD683x */
#define CB_TOPIC95 6 /* Toshiba ToPIC95 */
#define CB_TOPIC97 7 /* Toshiba ToPIC97/100 */
SLIST_HEAD(, pccbb_reslist) rl;
device_t cbdev;
device_t pccarddev;
struct proc *event_thread;
};
/* result of detect_card */
#define CARD_UKN_CARD 0x00
#define CARD_5V_CARD 0x01
#define CARD_3V_CARD 0x02
#define CARD_XV_CARD 0x04
#define CARD_YV_CARD 0x08
/* for power_socket */
#define CARD_VCC_UC 0x0000
#define CARD_VCC_3V 0x0001
#define CARD_VCC_XV 0x0002
#define CARD_VCC_YV 0x0003
#define CARD_VCC_0V 0x0004
#define CARD_VCC_5V 0x0005
#define CARD_VCCMASK 0x000f
#define CARD_VPP_UC 0x0000
#define CARD_VPP_VCC 0x0010
#define CARD_VPP_12V 0x0030
#define CARD_VPP_0V 0x0040
#define CARD_VPPMASK 0x00f0