d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
04ff88ceac
freebsd-dev/sys/dev/ata/chipsets/ata-intel.c
Alexander Motin 04ff88ceac As soon as they called in only same one place (ata_pcichannel_attach()), 
join allocate() and dmainit() atapci subdriver's channel initialization
methods into single ch_attach() method.

As opposite to ch_attach() add new ch_detach() method to deallocate/disable
channel.
2009-02-18 22:17:48 +00:00

516 lines
18 KiB
C
Raw Blame History

/*-
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ata.h"
#include <sys/param.h>
#include <sys/module.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/ata.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sema.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <machine/stdarg.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/ata/ata-all.h>
#include <dev/ata/ata-pci.h>
#include <ata_if.h>
/* local prototypes */
static int ata_intel_chipinit(device_t dev);
static int ata_intel_ch_attach(device_t dev);
static void ata_intel_reset(device_t dev);
static void ata_intel_old_setmode(device_t dev, int mode);
static void ata_intel_new_setmode(device_t dev, int mode);
static void ata_intel_sata_setmode(device_t dev, int mode);
static int ata_intel_31244_ch_attach(device_t dev);
static int ata_intel_31244_status(device_t dev);
static void ata_intel_31244_tf_write(struct ata_request *request);
static void ata_intel_31244_reset(device_t dev);
/* misc defines */
#define INTEL_AHCI 1
/*
* Intel chipset support functions
*/
static int
ata_intel_probe(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
static struct ata_chip_id ids[] =
{{ ATA_I82371FB, 0, 0, 2, ATA_WDMA2, "PIIX" },
{ ATA_I82371SB, 0, 0, 2, ATA_WDMA2, "PIIX3" },
{ ATA_I82371AB, 0, 0, 2, ATA_UDMA2, "PIIX4" },
{ ATA_I82443MX, 0, 0, 2, ATA_UDMA2, "PIIX4" },
{ ATA_I82451NX, 0, 0, 2, ATA_UDMA2, "PIIX4" },
{ ATA_I82801AB, 0, 0, 2, ATA_UDMA2, "ICH0" },
{ ATA_I82801AA, 0, 0, 2, ATA_UDMA4, "ICH" },
{ ATA_I82372FB, 0, 0, 2, ATA_UDMA4, "ICH" },
{ ATA_I82801BA, 0, 0, 2, ATA_UDMA5, "ICH2" },
{ ATA_I82801BA_1, 0, 0, 2, ATA_UDMA5, "ICH2" },
{ ATA_I82801CA, 0, 0, 2, ATA_UDMA5, "ICH3" },
{ ATA_I82801CA_1, 0, 0, 2, ATA_UDMA5, "ICH3" },
{ ATA_I82801DB, 0, 0, 2, ATA_UDMA5, "ICH4" },
{ ATA_I82801DB_1, 0, 0, 2, ATA_UDMA5, "ICH4" },
{ ATA_I82801EB, 0, 0, 2, ATA_UDMA5, "ICH5" },
{ ATA_I82801EB_S1, 0, 0, 2, ATA_SA150, "ICH5" },
{ ATA_I82801EB_R1, 0, 0, 2, ATA_SA150, "ICH5" },
{ ATA_I6300ESB, 0, 0, 2, ATA_UDMA5, "6300ESB" },
{ ATA_I6300ESB_S1, 0, 0, 2, ATA_SA150, "6300ESB" },
{ ATA_I6300ESB_R1, 0, 0, 2, ATA_SA150, "6300ESB" },
{ ATA_I82801FB, 0, 0, 2, ATA_UDMA5, "ICH6" },
{ ATA_I82801FB_S1, 0, INTEL_AHCI, 0, ATA_SA150, "ICH6" },
{ ATA_I82801FB_R1, 0, INTEL_AHCI, 0, ATA_SA150, "ICH6" },
{ ATA_I82801FBM, 0, INTEL_AHCI, 0, ATA_SA150, "ICH6M" },
{ ATA_I82801GB, 0, 0, 1, ATA_UDMA5, "ICH7" },
{ ATA_I82801GB_S1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH7" },
{ ATA_I82801GB_R1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH7" },
{ ATA_I82801GB_AH, 0, INTEL_AHCI, 0, ATA_SA300, "ICH7" },
{ ATA_I82801GBM_S1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH7M" },
{ ATA_I82801GBM_R1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH7M" },
{ ATA_I82801GBM_AH, 0, INTEL_AHCI, 0, ATA_SA300, "ICH7M" },
{ ATA_I63XXESB2, 0, 0, 1, ATA_UDMA5, "63XXESB2" },
{ ATA_I63XXESB2_S1, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },
{ ATA_I63XXESB2_S2, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },
{ ATA_I63XXESB2_R1, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },
{ ATA_I63XXESB2_R2, 0, INTEL_AHCI, 0, ATA_SA300, "63XXESB2" },
{ ATA_I82801HB_S1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8" },
{ ATA_I82801HB_S2, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8" },
{ ATA_I82801HB_R1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8" },
{ ATA_I82801HB_AH4, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8" },
{ ATA_I82801HB_AH6, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8" },
{ ATA_I82801HBM, 0, 0, 1, ATA_UDMA5, "ICH8M" },
{ ATA_I82801HBM_S1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8M" },
{ ATA_I82801HBM_S2, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8M" },
{ ATA_I82801HBM_S3, 0, INTEL_AHCI, 0, ATA_SA300, "ICH8M" },
{ ATA_I82801IB_S1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH9" },
{ ATA_I82801IB_S2, 0, INTEL_AHCI, 0, ATA_SA300, "ICH9" },
{ ATA_I82801IB_AH2, 0, INTEL_AHCI, 0, ATA_SA300, "ICH9" },
{ ATA_I82801IB_AH4, 0, INTEL_AHCI, 0, ATA_SA300, "ICH9" },
{ ATA_I82801IB_AH6, 0, INTEL_AHCI, 0, ATA_SA300, "ICH9" },
{ ATA_I82801IB_R1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH9" },
{ ATA_I82801JIB_S1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I82801JIB_AH, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I82801JIB_R1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I82801JIB_S2, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I82801JD_S1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I82801JD_AH, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I82801JD_R1, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I82801JD_S2, 0, INTEL_AHCI, 0, ATA_SA300, "ICH10" },
{ ATA_I31244, 0, 0, 2, ATA_SA150, "31244" },
{ 0, 0, 0, 0, 0, 0}};
if (pci_get_vendor(dev) != ATA_INTEL_ID)
return ENXIO;
if (!(ctlr->chip = ata_match_chip(dev, ids)))
return ENXIO;
ata_set_desc(dev);
ctlr->chipinit = ata_intel_chipinit;
return 0;
}
static int
ata_intel_chipinit(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
if (ata_setup_interrupt(dev, ata_generic_intr))
return ENXIO;
/* good old PIIX needs special treatment (not implemented) */
if (ctlr->chip->chipid == ATA_I82371FB) {
ctlr->setmode = ata_intel_old_setmode;
}
/* the intel 31244 needs special care if in DPA mode */
else if (ctlr->chip->chipid == ATA_I31244) {
if (pci_get_subclass(dev) != PCIS_STORAGE_IDE) {
ctlr->r_type2 = SYS_RES_MEMORY;
ctlr->r_rid2 = PCIR_BAR(0);
if (!(ctlr->r_res2 = bus_alloc_resource_any(dev, ctlr->r_type2,
&ctlr->r_rid2,
RF_ACTIVE)))
return ENXIO;
ctlr->channels = 4;
ctlr->ch_attach = ata_intel_31244_ch_attach;
ctlr->reset = ata_intel_31244_reset;
}
ctlr->setmode = ata_sata_setmode;
}
/* non SATA intel chips goes here */
else if (ctlr->chip->max_dma < ATA_SA150) {
ctlr->channels = ctlr->chip->cfg2;
ctlr->ch_attach = ata_intel_ch_attach;
ctlr->setmode = ata_intel_new_setmode;
}
/* SATA parts can be either compat or AHCI */
else {
/* force all ports active "the legacy way" */
pci_write_config(dev, 0x92, pci_read_config(dev, 0x92, 2) | 0x0f, 2);
ctlr->ch_attach = ata_intel_ch_attach;
ctlr->reset = ata_intel_reset;
/*
* if we have AHCI capability and AHCI or RAID mode enabled
* in BIOS we try for AHCI mode
*/
if ((ctlr->chip->cfg1 == INTEL_AHCI) &&
(pci_read_config(dev, 0x90, 1) & 0xc0) &&
(ata_ahci_chipinit(dev) != ENXIO))
return 0;
/* if BAR(5) is IO it should point to SATA interface registers */
ctlr->r_type2 = SYS_RES_IOPORT;
ctlr->r_rid2 = PCIR_BAR(5);
if ((ctlr->r_res2 = bus_alloc_resource_any(dev, ctlr->r_type2,
&ctlr->r_rid2, RF_ACTIVE)))
ctlr->setmode = ata_intel_sata_setmode;
else
ctlr->setmode = ata_sata_setmode;
/* enable PCI interrupt */
pci_write_config(dev, PCIR_COMMAND,
pci_read_config(dev, PCIR_COMMAND, 2) & ~0x0400, 2);
}
return 0;
}
static int
ata_intel_ch_attach(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
struct ata_channel *ch = device_get_softc(dev);
/* setup the usual register normal pci style */
if (ata_pci_ch_attach(dev))
return ENXIO;
/* if r_res2 is valid it points to SATA interface registers */
if (ctlr->r_res2) {
ch->r_io[ATA_IDX_ADDR].res = ctlr->r_res2;
ch->r_io[ATA_IDX_ADDR].offset = 0x00;
ch->r_io[ATA_IDX_DATA].res = ctlr->r_res2;
ch->r_io[ATA_IDX_DATA].offset = 0x04;
}
ch->flags |= ATA_ALWAYS_DMASTAT;
return 0;
}
static void
ata_intel_reset(device_t dev)
{
device_t parent = device_get_parent(dev);
struct ata_pci_controller *ctlr = device_get_softc(parent);
struct ata_channel *ch = device_get_softc(dev);
int mask, timeout;
/* ICH6 & ICH7 in compat mode has 4 SATA ports as master/slave on 2 ch's */
if (ctlr->chip->cfg1) {
mask = (0x0005 << ch->unit);
}
else {
/* ICH5 in compat mode has SATA ports as master/slave on 1 channel */
if (pci_read_config(parent, 0x90, 1) & 0x04)
mask = 0x0003;
else {
mask = (0x0001 << ch->unit);
/* XXX SOS should be in intel_ch_attach if we grow it */
ch->flags |= ATA_NO_SLAVE;
}
}
pci_write_config(parent, 0x92, pci_read_config(parent, 0x92, 2) & ~mask, 2);
DELAY(10);
pci_write_config(parent, 0x92, pci_read_config(parent, 0x92, 2) | mask, 2);
/* wait up to 1 sec for "connect well" */
for (timeout = 0; timeout < 100 ; timeout++) {
if (((pci_read_config(parent, 0x92, 2) & (mask << 4)) == (mask << 4)) &&
(ATA_IDX_INB(ch, ATA_STATUS) != 0xff))
break;
ata_udelay(10000);
}
ata_generic_reset(dev);
}
static void
ata_intel_old_setmode(device_t dev, int mode)
{
/* NOT YET */
}
static void
ata_intel_new_setmode(device_t dev, int mode)
{
device_t gparent = GRANDPARENT(dev);
struct ata_pci_controller *ctlr = device_get_softc(gparent);
struct ata_channel *ch = device_get_softc(device_get_parent(dev));
struct ata_device *atadev = device_get_softc(dev);
int devno = (ch->unit << 1) + atadev->unit;
u_int32_t reg40 = pci_read_config(gparent, 0x40, 4);
u_int8_t reg44 = pci_read_config(gparent, 0x44, 1);
u_int8_t reg48 = pci_read_config(gparent, 0x48, 1);
u_int16_t reg4a = pci_read_config(gparent, 0x4a, 2);
u_int16_t reg54 = pci_read_config(gparent, 0x54, 2);
u_int32_t mask40 = 0, new40 = 0;
u_int8_t mask44 = 0, new44 = 0;
int error;
u_int8_t timings[] = { 0x00, 0x00, 0x10, 0x21, 0x23, 0x10, 0x21, 0x23,
0x23, 0x23, 0x23, 0x23, 0x23, 0x23 };
mode = ata_limit_mode(dev, mode, ctlr->chip->max_dma);
if ( mode > ATA_UDMA2 && !(reg54 & (0x10 << devno))) {
ata_print_cable(dev, "controller");
mode = ATA_UDMA2;
}
error = ata_controlcmd(dev, ATA_SETFEATURES, ATA_SF_SETXFER, 0, mode);
if (bootverbose)
device_printf(dev, "%ssetting %s on %s chip\n",
(error) ? "FAILURE " : "",
ata_mode2str(mode), ctlr->chip->text);
if (!error) {
if (mode >= ATA_UDMA0) {
u_int8_t utimings[] = { 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10 };
pci_write_config(gparent, 0x48, reg48 | (0x0001 << devno), 2);
pci_write_config(gparent, 0x4a,
(reg4a & ~(0x3 << (devno << 2))) |
(utimings[mode & ATA_MODE_MASK] << (devno<<2)), 2);
}
else {
pci_write_config(gparent, 0x48, reg48 & ~(0x0001 << devno), 2);
pci_write_config(gparent, 0x4a, (reg4a & ~(0x3 << (devno << 2))),2);
}
reg54 |= 0x0400;
if (mode >= ATA_UDMA2)
reg54 |= (0x1 << devno);
else
reg54 &= ~(0x1 << devno);
if (mode >= ATA_UDMA5)
reg54 |= (0x1000 << devno);
else
reg54 &= ~(0x1000 << devno);
pci_write_config(gparent, 0x54, reg54, 2);
reg40 &= ~0x00ff00ff;
reg40 |= 0x40774077;
if (atadev->unit == ATA_MASTER) {
mask40 = 0x3300;
new40 = timings[ata_mode2idx(mode)] << 8;
}
else {
mask44 = 0x0f;
new44 = ((timings[ata_mode2idx(mode)] & 0x30) >> 2) |
(timings[ata_mode2idx(mode)] & 0x03);
}
if (ch->unit) {
mask40 <<= 16;
new40 <<= 16;
mask44 <<= 4;
new44 <<= 4;
}
pci_write_config(gparent, 0x40, (reg40 & ~mask40) | new40, 4);
pci_write_config(gparent, 0x44, (reg44 & ~mask44) | new44, 1);
atadev->mode = mode;
}
}
static void
ata_intel_sata_setmode(device_t dev, int mode)
{
struct ata_device *atadev = device_get_softc(dev);
if (atadev->param.satacapabilities != 0x0000 &&
atadev->param.satacapabilities != 0xffff) {
struct ata_channel *ch = device_get_softc(device_get_parent(dev));
int devno = (ch->unit << 1) + atadev->unit;
/* on some drives we need to set the transfer mode */
ata_controlcmd(dev, ATA_SETFEATURES, ATA_SF_SETXFER, 0,
ata_limit_mode(dev, mode, ATA_UDMA6));
/* set ATA_SSTATUS register offset */
ATA_IDX_OUTL(ch, ATA_IDX_ADDR, devno * 0x100);
/* query SATA STATUS for the speed */
if ((ATA_IDX_INL(ch, ATA_IDX_DATA) & ATA_SS_CONWELL_MASK) ==
ATA_SS_CONWELL_GEN2)
atadev->mode = ATA_SA300;
else
atadev->mode = ATA_SA150;
}
else {
mode = ata_limit_mode(dev, mode, ATA_UDMA5);
if (!ata_controlcmd(dev, ATA_SETFEATURES, ATA_SF_SETXFER, 0, mode))
atadev->mode = mode;
}
}
static int
ata_intel_31244_ch_attach(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
struct ata_channel *ch = device_get_softc(dev);
int i;
int ch_offset;
ch_offset = 0x200 + ch->unit * 0x200;
for (i = ATA_DATA; i < ATA_MAX_RES; i++)
ch->r_io[i].res = ctlr->r_res2;
/* setup ATA registers */
ch->r_io[ATA_DATA].offset = ch_offset + 0x00;
ch->r_io[ATA_FEATURE].offset = ch_offset + 0x06;
ch->r_io[ATA_COUNT].offset = ch_offset + 0x08;
ch->r_io[ATA_SECTOR].offset = ch_offset + 0x0c;
ch->r_io[ATA_CYL_LSB].offset = ch_offset + 0x10;
ch->r_io[ATA_CYL_MSB].offset = ch_offset + 0x14;
ch->r_io[ATA_DRIVE].offset = ch_offset + 0x18;
ch->r_io[ATA_COMMAND].offset = ch_offset + 0x1d;
ch->r_io[ATA_ERROR].offset = ch_offset + 0x04;
ch->r_io[ATA_STATUS].offset = ch_offset + 0x1c;
ch->r_io[ATA_ALTSTAT].offset = ch_offset + 0x28;
ch->r_io[ATA_CONTROL].offset = ch_offset + 0x29;
/* setup DMA registers */
ch->r_io[ATA_SSTATUS].offset = ch_offset + 0x100;
ch->r_io[ATA_SERROR].offset = ch_offset + 0x104;
ch->r_io[ATA_SCONTROL].offset = ch_offset + 0x108;
/* setup SATA registers */
ch->r_io[ATA_BMCMD_PORT].offset = ch_offset + 0x70;
ch->r_io[ATA_BMSTAT_PORT].offset = ch_offset + 0x72;
ch->r_io[ATA_BMDTP_PORT].offset = ch_offset + 0x74;
ch->flags |= ATA_NO_SLAVE;
ata_pci_hw(dev);
ch->hw.status = ata_intel_31244_status;
ch->hw.tf_write = ata_intel_31244_tf_write;
/* enable PHY state change interrupt */
ATA_OUTL(ctlr->r_res2, 0x4,
ATA_INL(ctlr->r_res2, 0x04) | (0x01 << (ch->unit << 3)));
return 0;
}
static int
ata_intel_31244_status(device_t dev)
{
/* do we have any PHY events ? */
ata_sata_phy_check_events(dev);
/* any drive action to take care of ? */
return ata_pci_status(dev);
}
static void
ata_intel_31244_tf_write(struct ata_request *request)
{
struct ata_channel *ch = device_get_softc(device_get_parent(request->dev));
struct ata_device *atadev = device_get_softc(request->dev);
if (atadev->flags & ATA_D_48BIT_ACTIVE) {
ATA_IDX_OUTW(ch, ATA_FEATURE, request->u.ata.feature);
ATA_IDX_OUTW(ch, ATA_COUNT, request->u.ata.count);
ATA_IDX_OUTW(ch, ATA_SECTOR, ((request->u.ata.lba >> 16) & 0xff00) |
(request->u.ata.lba & 0x00ff));
ATA_IDX_OUTW(ch, ATA_CYL_LSB, ((request->u.ata.lba >> 24) & 0xff00) |
((request->u.ata.lba >> 8) & 0x00ff));
ATA_IDX_OUTW(ch, ATA_CYL_MSB, ((request->u.ata.lba >> 32) & 0xff00) |
((request->u.ata.lba >> 16) & 0x00ff));
ATA_IDX_OUTW(ch, ATA_DRIVE, ATA_D_LBA | ATA_DEV(atadev->unit));
}
else {
ATA_IDX_OUTB(ch, ATA_FEATURE, request->u.ata.feature);
ATA_IDX_OUTB(ch, ATA_COUNT, request->u.ata.count);
if (atadev->flags & ATA_D_USE_CHS) {
int heads, sectors;
if (atadev->param.atavalid & ATA_FLAG_54_58) {
heads = atadev->param.current_heads;
sectors = atadev->param.current_sectors;
}
else {
heads = atadev->param.heads;
sectors = atadev->param.sectors;
}
ATA_IDX_OUTB(ch, ATA_SECTOR, (request->u.ata.lba % sectors)+1);
ATA_IDX_OUTB(ch, ATA_CYL_LSB,
(request->u.ata.lba / (sectors * heads)));
ATA_IDX_OUTB(ch, ATA_CYL_MSB,
(request->u.ata.lba / (sectors * heads)) >> 8);
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_DEV(atadev->unit) |
(((request->u.ata.lba% (sectors * heads)) /
sectors) & 0xf));
}
else {
ATA_IDX_OUTB(ch, ATA_SECTOR, request->u.ata.lba);
ATA_IDX_OUTB(ch, ATA_CYL_LSB, request->u.ata.lba >> 8);
ATA_IDX_OUTB(ch, ATA_CYL_MSB, request->u.ata.lba >> 16);
ATA_IDX_OUTB(ch, ATA_DRIVE,
ATA_D_IBM | ATA_D_LBA | ATA_DEV(atadev->unit) |
((request->u.ata.lba >> 24) & 0x0f));
}
}
}
static void
ata_intel_31244_reset(device_t dev)
{
if (ata_sata_phy_reset(dev))
ata_generic_reset(dev);
}
ATA_DECLARE_DRIVER(ata_intel);
MODULE_DEPEND(ata_intel, ata_ahci, 1, 1, 1);
Reference in New Issue View Git Blame Copy Permalink