freebsd-dev/sys/dev/mpr/mpr_config.c
Stephen McConnell a2c1487946 The wrong commit message was given with r283632. This is the correct message.
- Updated all files with 2015 Avago copyright, and updated LSI's copyright
  dates.

- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).

- Added a sysctl variable to control how StartStopUnit behavior works. User can
  select to spin down disks based on if disk is SSD or HDD.

- Inquiry data is required to tell if a disk will support SSU at shutdown or
  not. Due to the addition of mpssas_async, which gets Advanced Info but not
  Inquiry data, the setting of supports_SSU was moved to the
  mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
  since disks are shutdown as a target and not a LUN, this process was
  simplified by basing it on targets and not LUNs.

- Added a sysctl variable that sets the amount of time to retry after sending a
  failed SATA ID command. This helps with some bad disks and large disks that
  require a lot of time to spin up. Part of this change was to add a callout to
  handle timeouts with the SATA ID command. The callout function is called
  mpssas_ata_id_timeout(). (Fixes PR 191348)

- Changed the way resets work by allowing I/O to continue to devices that are
  not currently under a reset condition. This uses devq's instead of simq's and
  makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
  called mpssas_prepare_tm().

- Some changes were made to reduce code duplication when getting a SAS address
  for a SATA disk.

- Fixed some formatting and whitespace.

- Bump version of mps driver to 9.255.01.00-fbsd

PR:		191348
Reviewed by:	ken, scottl
Approved by:	ken, scottl
MFC after:	1 week
2015-05-28 18:24:22 +00:00

1304 lines
40 KiB
C

/*-
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* TODO Move headers to mprvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/sysctl.h>
#include <sys/eventhandler.h>
#include <sys/uio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/mpr/mpi/mpi2_type.h>
#include <dev/mpr/mpi/mpi2.h>
#include <dev/mpr/mpi/mpi2_ioc.h>
#include <dev/mpr/mpi/mpi2_sas.h>
#include <dev/mpr/mpi/mpi2_cnfg.h>
#include <dev/mpr/mpi/mpi2_init.h>
#include <dev/mpr/mpi/mpi2_tool.h>
#include <dev/mpr/mpr_ioctl.h>
#include <dev/mpr/mprvar.h>
/**
* mpr_config_get_ioc_pg8 - obtain ioc page 8
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_ioc_pg8(struct mpr_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2IOCPage8_t *config_page)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
MPI2_CONFIG_PAGE_IOC_8 *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
request->Header.PageNumber = 8;
request->Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
request->Header.PageNumber = 8;
request->Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
request->Header.PageLength = mpi_reply->Header.PageLength;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc((cm->cm_length), M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length, (sizeof(Mpi2IOCPage8_t))));
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_config_get_iounit_pg8 - obtain iounit page 8
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_iounit_pg8(struct mpr_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2IOUnitPage8_t *config_page)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
MPI2_CONFIG_PAGE_IO_UNIT_8 *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
request->Header.PageNumber = 8;
request->Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
request->Header.PageNumber = 8;
request->Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
request->Header.PageLength = mpi_reply->Header.PageLength;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc((cm->cm_length), M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length,
(sizeof(Mpi2IOUnitPage8_t))));
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_base_static_config_pages - static start of day config pages.
* @sc: per adapter object
*
* Return nothing.
*/
void
mpr_base_static_config_pages(struct mpr_softc *sc)
{
Mpi2ConfigReply_t mpi_reply;
int retry;
retry = 0;
while (mpr_config_get_ioc_pg8(sc, &mpi_reply, &sc->ioc_pg8)) {
retry++;
if (retry > 5) {
/* We need to Handle this situation */
/*FIXME*/
break;
}
}
retry = 0;
while (mpr_config_get_iounit_pg8(sc, &mpi_reply, &sc->iounit_pg8)) {
retry++;
if (retry > 5) {
/* We need to Handle this situation */
/*FIXME*/
break;
}
}
}
/**
* mpr_config_get_dpm_pg0 - obtain driver persistent mapping page0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_dpm_pg0(struct mpr_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2DriverMappingPage0_t *config_page, u16 sz)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
Mpi2DriverMappingPage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
memset(config_page, 0, sz);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
request->PageAddress = sc->max_dpm_entries <<
MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_NVRAM;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
request->PageAddress = sc->max_dpm_entries <<
MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
request->ExtPageLength = mpi_reply->ExtPageLength;
cm->cm_length = le16toh(request->ExtPageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPR, M_ZERO|M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length, sz));
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_config_set_dpm_pg0 - write an entry in driver persistent mapping page0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @entry_idx: entry index in DPM Page0 to be modified
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int mpr_config_set_dpm_pg0(struct mpr_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2DriverMappingPage0_t *config_page, u16 entry_idx)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
/* We can remove below two lines ????*/
request->PageAddress = 1 << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
request->PageAddress |= htole16(entry_idx);
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_DRIVERMAPPING0_PAGEVERSION;
request->ExtPageLength = mpi_reply->ExtPageLength;
request->PageAddress = 1 << MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT;
request->PageAddress |= htole16(entry_idx);
cm->cm_length = le16toh(mpi_reply->ExtPageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAOUT;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
bcopy(config_page, page, MIN(cm->cm_length,
(sizeof(Mpi2DriverMappingPage0_t))));
cm->cm_data = page;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request to write page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: page written with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_config_get_sas_device_pg0 - obtain sas device page 0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_sas_device_pg0(struct mpr_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u16 handle)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
Mpi2SasDevicePage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
request->ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
request->ExtPageLength = mpi_reply->ExtPageLength;
request->PageAddress = htole32(form | handle);
cm->cm_length = le16toh(mpi_reply->ExtPageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length,
sizeof(Mpi2SasDevicePage0_t)));
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_config_get_bios_pg3 - obtain BIOS page 3
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_bios_pg3(struct mpr_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2BiosPage3_t *config_page)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
Mpi2BiosPage3_t *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
request->Header.PageNumber = 3;
request->Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
request->Header.PageNumber = 3;
request->Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
request->Header.PageLength = mpi_reply->Header.PageLength;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length, sizeof(Mpi2BiosPage3_t)));
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_config_get_raid_volume_pg0 - obtain raid volume page 0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @page_address: form and handle value used to get page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_raid_volume_pg0(struct mpr_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 page_address)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
Mpi2RaidVolPage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
/*
* This page must be polled because the IOC isn't ready yet when this
* page is needed.
*/
error = mpr_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 0;
request->Header.PageLength = mpi_reply->Header.PageLength;
request->Header.PageVersion = mpi_reply->Header.PageVersion;
request->PageAddress = page_address;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
/*
* This page must be polled because the IOC isn't ready yet when this
* page is needed.
*/
error = mpr_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, cm->cm_length);
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_config_get_raid_volume_pg1 - obtain raid volume page 1
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: volume handle
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_raid_volume_pg1(struct mpr_softc *sc, Mpi2ConfigReply_t
*mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u16 handle)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
Mpi2RaidVolPage1_t *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 1;
request->Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
request->Header.PageNumber = 1;
request->Header.PageLength = mpi_reply->Header.PageLength;
request->Header.PageVersion = mpi_reply->Header.PageVersion;
request->PageAddress = htole32(form | handle);
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
error = mpr_wait_command(sc, cm, 60, CAN_SLEEP);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length,
sizeof(Mpi2RaidVolPage1_t)));
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}
/**
* mpr_config_get_volume_wwid - returns wwid given the volume handle
* @sc: per adapter object
* @volume_handle: volume handle
* @wwid: volume wwid
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_volume_wwid(struct mpr_softc *sc, u16 volume_handle, u64 *wwid)
{
Mpi2ConfigReply_t mpi_reply;
Mpi2RaidVolPage1_t raid_vol_pg1;
*wwid = 0;
if (!(mpr_config_get_raid_volume_pg1(sc, &mpi_reply, &raid_vol_pg1,
MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, volume_handle))) {
*wwid = le64toh((u64)raid_vol_pg1.WWID.High << 32 |
raid_vol_pg1.WWID.Low);
return 0;
} else
return -1;
}
/**
* mpr_config_get_pd_pg0 - obtain raid phys disk page 0
* @sc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @page_address: form and handle value used to get page
* Context: sleep.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpr_config_get_raid_pd_pg0(struct mpr_softc *sc, Mpi2ConfigReply_t *mpi_reply,
Mpi2RaidPhysDiskPage0_t *config_page, u32 page_address)
{
MPI2_CONFIG_REQUEST *request;
MPI2_CONFIG_REPLY *reply;
struct mpr_command *cm;
Mpi2RaidPhysDiskPage0_t *page = NULL;
int error = 0;
u16 ioc_status;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
request->Header.PageNumber = 0;
request->Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
/*
* This page must be polled because the IOC isn't ready yet when this
* page is needed.
*/
error = mpr_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for header completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: header read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
/* We have to do free and alloc for the reply-free and reply-post
* counters to match - Need to review the reply FIFO handling.
*/
mpr_free_command(sc, cm);
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed @ line %d\n", __func__,
__LINE__);
error = EBUSY;
goto out;
}
request = (MPI2_CONFIG_REQUEST *)cm->cm_req;
bzero(request, sizeof(MPI2_CONFIG_REQUEST));
request->Function = MPI2_FUNCTION_CONFIG;
request->Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
request->Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
request->Header.PageNumber = 0;
request->Header.PageLength = mpi_reply->Header.PageLength;
request->Header.PageVersion = mpi_reply->Header.PageVersion;
request->PageAddress = page_address;
cm->cm_length = le16toh(mpi_reply->Header.PageLength) * 4;
cm->cm_sge = &request->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_SGE_SIMPLE | MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
page = malloc(cm->cm_length, M_MPR, M_ZERO | M_NOWAIT);
if (!page) {
printf("%s: page alloc failed\n", __func__);
error = ENOMEM;
goto out;
}
cm->cm_data = page;
/*
* This page must be polled because the IOC isn't ready yet when this
* page is needed.
*/
error = mpr_request_polled(sc, cm);
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: poll for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
ioc_status = le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
bcopy(reply, mpi_reply, sizeof(MPI2_CONFIG_REPLY));
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
/* FIXME */
/* If the poll returns error then we need to do diag reset */
printf("%s: page read with error; iocstatus = 0x%x\n",
__func__, ioc_status);
error = ENXIO;
goto out;
}
bcopy(page, config_page, MIN(cm->cm_length,
sizeof(Mpi2RaidPhysDiskPage0_t)));
out:
free(page, M_MPR);
if (cm)
mpr_free_command(sc, cm);
return (error);
}