freebsd-dev/sys/dev/nvme/nvme.c
Jim Harris cf81529ce3 Create struct nvme_status.
NVMe error log entries include status, so breaking this out into
its own data structure allows it to be included in both the
nvme_completion data structure as well as error log entry data
structures.

While here, expose nvme_completion_is_error(), and change all of
the places that were explicitly looking at sc/sct bits to use this
macro instead.

Sponsored by:	Intel
Reviewed by:	carl
2013-03-26 21:00:18 +00:00

378 lines
9.1 KiB
C

/*-
* Copyright (C) 2012 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/module.h>
#include <vm/uma.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include "nvme_private.h"
struct nvme_consumer {
uint32_t id;
nvme_cons_ns_fn_t ns_fn;
nvme_cons_ctrlr_fn_t ctrlr_fn;
nvme_cons_async_fn_t async_fn;
};
struct nvme_consumer nvme_consumer[NVME_MAX_CONSUMERS];
#define INVALID_CONSUMER_ID 0xFFFF
uma_zone_t nvme_request_zone;
MALLOC_DEFINE(M_NVME, "nvme", "nvme(4) memory allocations");
static int nvme_probe(device_t);
static int nvme_attach(device_t);
static int nvme_detach(device_t);
static int nvme_modevent(module_t mod, int type, void *arg);
static devclass_t nvme_devclass;
static device_method_t nvme_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, nvme_probe),
DEVMETHOD(device_attach, nvme_attach),
DEVMETHOD(device_detach, nvme_detach),
{ 0, 0 }
};
static driver_t nvme_pci_driver = {
"nvme",
nvme_pci_methods,
sizeof(struct nvme_controller),
};
DRIVER_MODULE(nvme, pci, nvme_pci_driver, nvme_devclass, nvme_modevent, 0);
MODULE_VERSION(nvme, 1);
static struct _pcsid
{
u_int32_t type;
const char *desc;
} pci_ids[] = {
{ 0x01118086, "NVMe Controller" },
{ CHATHAM_PCI_ID, "Chatham Prototype NVMe Controller" },
{ IDT32_PCI_ID, "IDT NVMe Controller (32 channel)" },
{ IDT8_PCI_ID, "IDT NVMe Controller (8 channel)" },
{ 0x00000000, NULL }
};
static int
nvme_probe (device_t device)
{
struct _pcsid *ep;
u_int32_t type;
type = pci_get_devid(device);
ep = pci_ids;
while (ep->type && ep->type != type)
++ep;
if (ep->desc) {
device_set_desc(device, ep->desc);
return (BUS_PROBE_DEFAULT);
}
#if defined(PCIS_STORAGE_NVM)
if (pci_get_class(device) == PCIC_STORAGE &&
pci_get_subclass(device) == PCIS_STORAGE_NVM &&
pci_get_progif(device) == PCIP_STORAGE_NVM_ENTERPRISE_NVMHCI_1_0) {
device_set_desc(device, "Generic NVMe Device");
return (BUS_PROBE_GENERIC);
}
#endif
return (ENXIO);
}
static void
nvme_init(void)
{
uint32_t i;
nvme_request_zone = uma_zcreate("nvme_request",
sizeof(struct nvme_request), NULL, NULL, NULL, NULL, 0, 0);
for (i = 0; i < NVME_MAX_CONSUMERS; i++)
nvme_consumer[i].id = INVALID_CONSUMER_ID;
}
SYSINIT(nvme_register, SI_SUB_DRIVERS, SI_ORDER_SECOND, nvme_init, NULL);
static void
nvme_uninit(void)
{
uma_zdestroy(nvme_request_zone);
}
SYSUNINIT(nvme_unregister, SI_SUB_DRIVERS, SI_ORDER_SECOND, nvme_uninit, NULL);
static void
nvme_load(void)
{
}
static void
nvme_unload(void)
{
}
static void
nvme_shutdown(void)
{
device_t *devlist;
struct nvme_controller *ctrlr;
union cc_register cc;
union csts_register csts;
int dev, devcount;
if (devclass_get_devices(nvme_devclass, &devlist, &devcount))
return;
for (dev = 0; dev < devcount; dev++) {
/*
* Only notify controller of shutdown when a real shutdown is
* in process, not when a module unload occurs. It seems at
* least some controllers (Chatham at least) don't let you
* re-enable the controller after shutdown notification has
* been received.
*/
ctrlr = DEVICE2SOFTC(devlist[dev]);
cc.raw = nvme_mmio_read_4(ctrlr, cc);
cc.bits.shn = NVME_SHN_NORMAL;
nvme_mmio_write_4(ctrlr, cc, cc.raw);
csts.raw = nvme_mmio_read_4(ctrlr, csts);
while (csts.bits.shst != NVME_SHST_COMPLETE) {
DELAY(5);
csts.raw = nvme_mmio_read_4(ctrlr, csts);
}
}
free(devlist, M_TEMP);
}
static int
nvme_modevent(module_t mod, int type, void *arg)
{
switch (type) {
case MOD_LOAD:
nvme_load();
break;
case MOD_UNLOAD:
nvme_unload();
break;
case MOD_SHUTDOWN:
nvme_shutdown();
break;
default:
break;
}
return (0);
}
void
nvme_dump_command(struct nvme_command *cmd)
{
printf(
"opc:%x f:%x r1:%x cid:%x nsid:%x r2:%x r3:%x mptr:%jx prp1:%jx prp2:%jx cdw:%x %x %x %x %x %x\n",
cmd->opc, cmd->fuse, cmd->rsvd1, cmd->cid, cmd->nsid,
cmd->rsvd2, cmd->rsvd3,
(uintmax_t)cmd->mptr, (uintmax_t)cmd->prp1, (uintmax_t)cmd->prp2,
cmd->cdw10, cmd->cdw11, cmd->cdw12, cmd->cdw13, cmd->cdw14,
cmd->cdw15);
}
void
nvme_dump_completion(struct nvme_completion *cpl)
{
printf("cdw0:%08x sqhd:%04x sqid:%04x "
"cid:%04x p:%x sc:%02x sct:%x m:%x dnr:%x\n",
cpl->cdw0, cpl->sqhd, cpl->sqid,
cpl->cid, cpl->status.p, cpl->status.sc, cpl->status.sct,
cpl->status.m, cpl->status.dnr);
}
void
nvme_payload_map(void *arg, bus_dma_segment_t *seg, int nseg, int error)
{
struct nvme_tracker *tr = arg;
uint32_t cur_nseg;
KASSERT(error == 0, ("nvme_payload_map error != 0\n"));
/*
* Note that we specified PAGE_SIZE for alignment and max
* segment size when creating the bus dma tags. So here
* we can safely just transfer each segment to its
* associated PRP entry.
*/
tr->req->cmd.prp1 = seg[0].ds_addr;
if (nseg == 2) {
tr->req->cmd.prp2 = seg[1].ds_addr;
} else if (nseg > 2) {
cur_nseg = 1;
tr->req->cmd.prp2 = (uint64_t)tr->prp_bus_addr;
while (cur_nseg < nseg) {
tr->prp[cur_nseg-1] =
(uint64_t)seg[cur_nseg].ds_addr;
cur_nseg++;
}
}
nvme_qpair_submit_tracker(tr->qpair, tr);
}
static int
nvme_attach(device_t dev)
{
struct nvme_controller *ctrlr = DEVICE2SOFTC(dev);
int status;
status = nvme_ctrlr_construct(ctrlr, dev);
if (status != 0)
return (status);
/*
* Reset controller twice to ensure we do a transition from cc.en==1
* to cc.en==0. This is because we don't really know what status
* the controller was left in when boot handed off to OS.
*/
status = nvme_ctrlr_hw_reset(ctrlr);
if (status != 0)
return (status);
status = nvme_ctrlr_hw_reset(ctrlr);
if (status != 0)
return (status);
ctrlr->config_hook.ich_func = nvme_ctrlr_start;
ctrlr->config_hook.ich_arg = ctrlr;
config_intrhook_establish(&ctrlr->config_hook);
return (0);
}
static int
nvme_detach (device_t dev)
{
struct nvme_controller *ctrlr = DEVICE2SOFTC(dev);
nvme_ctrlr_destruct(ctrlr, dev);
return (0);
}
static void
nvme_notify_consumer(struct nvme_consumer *cons)
{
device_t *devlist;
struct nvme_controller *ctrlr;
struct nvme_namespace *ns;
void *ctrlr_cookie;
int dev_idx, ns_idx, devcount;
if (devclass_get_devices(nvme_devclass, &devlist, &devcount))
return;
for (dev_idx = 0; dev_idx < devcount; dev_idx++) {
ctrlr = DEVICE2SOFTC(devlist[dev_idx]);
if (cons->ctrlr_fn != NULL)
ctrlr_cookie = (*cons->ctrlr_fn)(ctrlr);
else
ctrlr_cookie = NULL;
ctrlr->cons_cookie[cons->id] = ctrlr_cookie;
for (ns_idx = 0; ns_idx < ctrlr->cdata.nn; ns_idx++) {
ns = &ctrlr->ns[ns_idx];
if (cons->ns_fn != NULL)
ns->cons_cookie[cons->id] =
(*cons->ns_fn)(ns, ctrlr_cookie);
}
}
free(devlist, M_TEMP);
}
void
nvme_notify_async_consumers(struct nvme_controller *ctrlr,
const struct nvme_completion *async_cpl)
{
struct nvme_consumer *cons;
uint32_t i;
for (i = 0; i < NVME_MAX_CONSUMERS; i++) {
cons = &nvme_consumer[i];
if (cons->id != INVALID_CONSUMER_ID && cons->async_fn != NULL)
(*cons->async_fn)(ctrlr->cons_cookie[i], async_cpl);
}
}
struct nvme_consumer *
nvme_register_consumer(nvme_cons_ns_fn_t ns_fn, nvme_cons_ctrlr_fn_t ctrlr_fn,
nvme_cons_async_fn_t async_fn)
{
int i;
/*
* TODO: add locking around consumer registration. Not an issue
* right now since we only have one nvme consumer - nvd(4).
*/
for (i = 0; i < NVME_MAX_CONSUMERS; i++)
if (nvme_consumer[i].id == INVALID_CONSUMER_ID) {
nvme_consumer[i].id = i;
nvme_consumer[i].ns_fn = ns_fn;
nvme_consumer[i].ctrlr_fn = ctrlr_fn;
nvme_consumer[i].async_fn = async_fn;
nvme_notify_consumer(&nvme_consumer[i]);
return (&nvme_consumer[i]);
}
printf("nvme(4): consumer not registered - no slots available\n");
return (NULL);
}
void
nvme_unregister_consumer(struct nvme_consumer *consumer)
{
consumer->id = INVALID_CONSUMER_ID;
}