2e5df98a18
and use a loop so that multiple cache commands can be strung together on the command line into a single update to the volume's properties. Reviewed by: bz Approved by: re (kib) MFC after: 1 week
608 lines
16 KiB
Groff
608 lines
16 KiB
Groff
.\" Copyright (c) 2008, 2009 Yahoo!, Inc.
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. The names of the authors may not be used to endorse or promote
|
|
.\" products derived from this software without specific prior written
|
|
.\" permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd September 2, 2011
|
|
.Dt MFIUTIL 8
|
|
.Os
|
|
.Sh NAME
|
|
.Nm mfiutil
|
|
.Nd Utility for managing LSI MegaRAID SAS controllers
|
|
.Sh SYNOPSIS
|
|
.Nm
|
|
.Cm version
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm show adapter
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm show battery
|
|
.Nm
|
|
.Op Fl d
|
|
.Op Fl e
|
|
.Op Fl u Ar unit
|
|
.Cm show config
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm show drives
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm show events
|
|
.Op Fl c Ar class
|
|
.Op Fl l Ar locale
|
|
.Op Fl n Ar count
|
|
.Op Fl v
|
|
.Op Ar start Op Ar stop
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm show firmware
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm show logstate
|
|
.Nm
|
|
.Op Fl d
|
|
.Op Fl e
|
|
.Op Fl u Ar unit
|
|
.Cm show patrol
|
|
.Nm
|
|
.Op Fl d
|
|
.Op Fl e
|
|
.Op Fl u Ar unit
|
|
.Cm show progress
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm show volumes
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm fail Ar drive
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm good Ar drive
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm rebuild Ar drive
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm drive progress Ar drive
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm drive clear Ar drive Brq "start | stop"
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm start rebuild Ar drive
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm abort rebuild Ar drive
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm locate Ar drive Brq "on | off"
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm cache Ar volume Op Ar setting Oo Ar value Oc Op ...
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm name Ar volume Ar name
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm volume progress Ar volume
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm clear
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm create Ar type
|
|
.Op Fl v
|
|
.Op Fl s Ar stripe_size
|
|
.Ar drive Ns Op \&, Ns Ar drive Ns Op ",..."
|
|
.Op Ar drive Ns Op \&, Ns Ar drive Ns Op ",..."
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm delete Ar volume
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm add Ar drive Op Ar volume
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm remove Ar drive
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm start patrol
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm stop patrol
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm patrol Ar command Op Ar interval Op Ar start
|
|
.Nm
|
|
.Op Fl u Ar unit
|
|
.Cm flash Ar file
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
utility can be used to display or modify various parameters on LSI
|
|
MegaRAID SAS RAID controllers.
|
|
Each invocation of
|
|
.Nm
|
|
consists of zero or more global options followed by a command.
|
|
Commands may support additional optional or required arguments after the
|
|
command.
|
|
.Pp
|
|
Currently one global option is supported:
|
|
.Bl -tag -width indent
|
|
.It Fl u Ar unit
|
|
.Ar unit
|
|
specifies the unit of the controller to work with.
|
|
If no unit is specified,
|
|
then unit 0 is used.
|
|
.El
|
|
.Pp
|
|
Various commands accept either or both of the two options:
|
|
.Bl -tag -width indent
|
|
.It Fl d
|
|
Print numeric device IDs as drive identifier.
|
|
This is the default.
|
|
Useful in combination with
|
|
.Fl e
|
|
to print both, numeric device IDs and enclosure:slot information.
|
|
.It Fl e
|
|
Print drive identifiers in enclosure:slot form.
|
|
See next paragraph on format details in context of input rather than
|
|
output.
|
|
.El
|
|
.Pp
|
|
Drives may be specified in two forms.
|
|
First,
|
|
a drive may be identified by its device ID.
|
|
The device ID for configured drives can be found in
|
|
.Cm show config .
|
|
Second,
|
|
a drive may be identified by its location as
|
|
.Sm off
|
|
.Op E Ar xx Ns \&:
|
|
.Li S Ns Ar yy
|
|
.Sm on
|
|
where
|
|
.Ar xx
|
|
is the enclosure
|
|
and
|
|
.Ar yy
|
|
is the slot for each drive as displayed in
|
|
.Cm show drives .
|
|
.Pp
|
|
Volumes may be specified in two forms.
|
|
First,
|
|
a volume may be identified by its target ID.
|
|
Second,
|
|
on the volume may be specified by the corresponding
|
|
.Em mfidX
|
|
device,
|
|
such as
|
|
.Em mfid0 .
|
|
.Pp
|
|
The
|
|
.Nm
|
|
utility supports several different groups of commands.
|
|
The first group of commands provide information about the controller,
|
|
the volumes it manages, and the drives it controls.
|
|
The second group of commands are used to manage the physical drives
|
|
attached to the controller.
|
|
The third group of commands are used to manage the logical volumes
|
|
managed by the controller.
|
|
The fourth group of commands are used to manage the drive configuration for
|
|
the controller.
|
|
The fifth group of commands are used to manage controller-wide operations.
|
|
.Pp
|
|
The informational commands include:
|
|
.Bl -tag -width indent
|
|
.It Cm version
|
|
Displays the version of
|
|
.Nm .
|
|
.It Cm show adapter
|
|
Displays information about the RAID controller such as the model number.
|
|
.It Cm show battery
|
|
Displays information about the battery from the battery backup unit.
|
|
.It Cm show config
|
|
Displays the volume and drive configuration for the controller.
|
|
Each array is listed along with the physical drives the array is built from.
|
|
Each volume is listed along with the arrays that the volume spans.
|
|
If any hot spare drives are configured, then they are listed as well.
|
|
.It Cm show drives
|
|
Lists all of the physical drives attached to the controller.
|
|
.It Xo Cm show events
|
|
.Op Fl c Ar class
|
|
.Op Fl l Ar locale
|
|
.Op Fl n Ar count
|
|
.Op Fl v
|
|
.Op Ar start Op Ar stop
|
|
.Xc
|
|
Display entries from the controller's event log.
|
|
The controller maintains a circular buffer of events.
|
|
Each event is tagged with a class and locale.
|
|
.Pp
|
|
The
|
|
.Ar class
|
|
parameter limits the output to entries at the specified class or higher.
|
|
The default class is
|
|
.Dq warn .
|
|
The available classes from lowest priority to highest are:
|
|
.Bl -tag -width -indent
|
|
.It Cm debug
|
|
Debug messages.
|
|
.It Cm progress
|
|
Periodic progress updates for long-running operations such as background
|
|
initializations, array rebuilds, or patrol reads.
|
|
.It Cm info
|
|
Informational messages such as drive insertions and volume creations.
|
|
.It Cm warn
|
|
Indicates that some component may be close to failing.
|
|
.It Cm crit
|
|
A component has failed, but no data is lost.
|
|
For example, a volume becoming degraded due to a drive failure.
|
|
.It Cm fatal
|
|
A component has failed resulting in data loss.
|
|
.It Cm dead
|
|
The controller itself has died.
|
|
.El
|
|
.Pp
|
|
The
|
|
.Ar locale
|
|
parameter limits the output to entries for the specified part of the controller.
|
|
The default locale is
|
|
.Dq all .
|
|
The available locales are
|
|
.Dq volume ,
|
|
.Dq drive ,
|
|
.Dq enclosure ,
|
|
.Dq battery ,
|
|
.Dq sas ,
|
|
.Dq controller ,
|
|
.Dq config ,
|
|
.Dq cluster ,
|
|
and
|
|
.Dq all .
|
|
.Pp
|
|
The
|
|
.Ar count
|
|
parameter is a debugging aid that specifies the number of events to fetch from
|
|
the controller for each low-level request.
|
|
The default is 15 events.
|
|
.Pp
|
|
By default, matching event log entries from the previous shutdown up to the
|
|
present are displayed. This range can be adjusted via the
|
|
.Ar start
|
|
and
|
|
.Ar stop
|
|
parameters.
|
|
Each of these parameters can either be specified as a log entry number or as
|
|
one of the following aliases:
|
|
.Bl -tag -width -indent
|
|
.It Cm newest
|
|
The newest entry in the event log.
|
|
.It Cm oldest
|
|
The oldest entry in the event log.
|
|
.It Cm clear
|
|
The first entry since the event log was cleared.
|
|
.It Cm shutdown
|
|
The entry in the event log corresponding to the last time the controller was
|
|
cleanly shut down.
|
|
.It Cm boot
|
|
The entry in the event log corresponding to the most recent boot.
|
|
.El
|
|
.It Cm show firmware
|
|
Lists all of the firmware images present on the controller.
|
|
.It Cm show logstate
|
|
Display the various sequence numbers associated with the event log.
|
|
.It Cm show patrol
|
|
Display the status of the controller's patrol read operation.
|
|
.It Cm show progress
|
|
Report the current progress and estimated completion time for active
|
|
operations on all volumes and drives.
|
|
.It Cm show volumes
|
|
Lists all of the logical volumes managed by the controller.
|
|
.El
|
|
.Pp
|
|
The physical drive management commands include:
|
|
.Bl -tag -width indent
|
|
.It Cm fail Ar drive
|
|
Mark
|
|
.Ar drive
|
|
as failed.
|
|
.Ar Drive
|
|
must be an online drive that is part of an array.
|
|
.It Cm good Ar drive
|
|
Mark
|
|
.Ar drive
|
|
as an unconfigured good drive.
|
|
.Ar Drive
|
|
must not be part of an existing array.
|
|
.It Cm rebuild Ar drive
|
|
Mark a failed
|
|
.Ar drive
|
|
that is still part of an array as a good drive suitable for a rebuild.
|
|
The firmware should kick off an array rebuild on its own if a failed drive
|
|
is marked as a rebuild drive.
|
|
.It Cm drive progress Ar drive
|
|
Report the current progress and estimated completion time of drive operations
|
|
such as rebuilds or patrol reads.
|
|
.It Cm drive clear Ar drive Brq "start | stop"
|
|
Start or stop the writing of all 0x00 characters to a drive.
|
|
.It Cm start rebuild Ar drive
|
|
Manually start a rebuild on
|
|
.Ar drive .
|
|
.It Cm abort rebuild Ar drive
|
|
Abort an in-progress rebuild operation on
|
|
.Ar drive .
|
|
It can be resumed with the
|
|
.Cm start rebuild
|
|
command.
|
|
.It Cm locate Ar drive Brq "on | off"
|
|
Change the state of the external LED associated with
|
|
.Ar drive .
|
|
.El
|
|
.Pp
|
|
The logical volume management commands include:
|
|
.Bl -tag -width indent
|
|
.It Cm cache Ar volume Op Ar setting Oo Ar value Oc Op ...
|
|
If no
|
|
.Ar setting
|
|
arguments are supplied, then the current cache policy for
|
|
.Ar volume
|
|
is displayed;
|
|
otherwise,
|
|
the cache policy for
|
|
.Ar volume
|
|
is modified.
|
|
One or more
|
|
.Ar setting
|
|
arguments may be given.
|
|
Some settings take an additional
|
|
.Ar value
|
|
argument as noted below.
|
|
The valid settings are:
|
|
.Bl -tag -width indent
|
|
.It Cm enable
|
|
Enable caching for both read and write I/O operations.
|
|
.It Cm disable
|
|
Disable caching for both read and write I/O operations.
|
|
.It Cm reads
|
|
Enable caching only for read I/O operations.
|
|
.It Cm writes
|
|
Enable caching only for write I/O operations.
|
|
.It Cm write-back
|
|
Use write-back policy for cached writes.
|
|
.It Cm write-through
|
|
Use write-through policy for cached writes.
|
|
.It Cm read-ahead Ar value
|
|
Set the read ahead policy for cached reads.
|
|
The
|
|
.Ar value
|
|
argument can be set to either
|
|
.Dq none ,
|
|
.Dq adaptive ,
|
|
or
|
|
.Dq always .
|
|
.It Cm bad-bbu-write-cache Ar value
|
|
Control the behavior of I/O write caching if the battery is dead or
|
|
missing.
|
|
The
|
|
.Ar value
|
|
argument can be set to either
|
|
.Dq disable
|
|
or
|
|
.Dq enable .
|
|
In general this setting should be left disabled to avoid data loss when
|
|
the system loses power.
|
|
.It Cm write-cache Ar value
|
|
Control the write caches on the physical drives backing
|
|
.Ar volume .
|
|
The
|
|
.Ar value
|
|
argument can be set to either
|
|
.Dq disable ,
|
|
.Dq enable ,
|
|
or
|
|
.Dq default .
|
|
.Pp
|
|
In general this setting should be left disabled to avoid data loss when the
|
|
physical drives lose power.
|
|
The battery backup of the RAID controller does not save data in the write
|
|
caches of the physical drives.
|
|
.El
|
|
.It Cm name Ar volume Ar name
|
|
Sets the name of
|
|
.Ar volume
|
|
to
|
|
.Ar name .
|
|
.It Cm volume progress Ar volume
|
|
Report the current progress and estimated completion time of volume operations
|
|
such as consistency checks and initializations.
|
|
.El
|
|
.Pp
|
|
The configuration commands include:
|
|
.Bl -tag -width indent
|
|
.It Cm clear
|
|
Delete the entire configuration including all volumes, arrays, and spares.
|
|
.It Xo Cm create Ar type
|
|
.Op Fl v
|
|
.Op Fl s Ar stripe_size
|
|
.Ar drive Ns Op \&, Ns Ar drive Ns Op ",..."
|
|
.Op Ar drive Ns Op \&, Ns Ar drive Ns Op ",..."
|
|
.Xc
|
|
Create a new volume.
|
|
The
|
|
.Ar type
|
|
specifies the type of volume to create.
|
|
Currently supported types include:
|
|
.Bl -tag -width indent
|
|
.It Cm jbod
|
|
Creates a RAID0 volume for each drive specified.
|
|
Each drive must be specified as a separate argument.
|
|
.It Cm raid0
|
|
Creates one RAID0 volume spanning the drives listed in the single drive list.
|
|
.It Cm raid1
|
|
Creates one RAID1 volume spanning the drives listed in the single drive list.
|
|
.It Cm raid5
|
|
Creates one RAID5 volume spanning the drives listed in the single drive list.
|
|
.It Cm raid6
|
|
Creates one RAID6 volume spanning the drives listed in the single drive list.
|
|
.It Cm raid10
|
|
Creates one RAID10 volume spanning multiple RAID1 arrays.
|
|
The drives for each RAID1 array are specified as a single drive list.
|
|
.It Cm raid50
|
|
Creates one RAID50 volume spanning multiple RAID5 arrays.
|
|
The drives for each RAID5 array are specified as a single drive list.
|
|
.It Cm raid60
|
|
Creates one RAID60 volume spanning multiple RAID6 arrays.
|
|
The drives for each RAID6 array are specified as a single drive list.
|
|
.It Cm concat
|
|
Creates a single volume by concatenating all of the drives in the single drive
|
|
list.
|
|
.El
|
|
.Pp
|
|
.Sy Note:
|
|
Not all volume types are supported by all controllers.
|
|
.Pp
|
|
If the
|
|
.Fl v
|
|
flag is specified after
|
|
.Ar type ,
|
|
then more verbose output will be enabled.
|
|
Currently this just provides notification as drives are added to arrays and
|
|
arrays to volumes when building the configuration.
|
|
.Pp
|
|
The
|
|
.Fl s
|
|
.Ar stripe_size
|
|
parameter allows the stripe size of the array to be set.
|
|
By default a stripe size of 64K is used.
|
|
Valid values are 512 through 1M, though the MFI firmware may reject some
|
|
values.
|
|
.It Cm delete Ar volume
|
|
Delete the volume
|
|
.Ar volume .
|
|
.It Cm add Ar drive Op Ar volume
|
|
Mark
|
|
.Ar drive
|
|
as a hot spare.
|
|
.Ar Drive
|
|
must be in the unconfigured good state.
|
|
If
|
|
.Ar volume
|
|
is specified,
|
|
then the hot spare will be dedicated to arrays backing that volume.
|
|
Otherwise,
|
|
.Ar drive
|
|
will be used as a global hot spare backing all arrays for this controller.
|
|
Note that
|
|
.Ar drive
|
|
must be as large as the smallest drive in all of the arrays it is going to
|
|
back.
|
|
.It Cm remove Ar drive
|
|
Remove the hot spare
|
|
.Ar drive
|
|
from service.
|
|
It will be placed in the unconfigured good state.
|
|
.El
|
|
.Pp
|
|
The controller management commands include:
|
|
.Bl -tag -width indent
|
|
.It Cm patrol Ar command Op Ar interval Op Ar start
|
|
Set the patrol read operation mode.
|
|
The
|
|
.Ar command
|
|
argument can be one of the following values:
|
|
.Bl -tag -width indent
|
|
.It Cm disable
|
|
Disable patrol reads.
|
|
.It Cm auto
|
|
Enable periodic patrol reads initiated by the firmware.
|
|
The optional
|
|
.Ar interval
|
|
argument specifies the interval in seconds between patrol reads.
|
|
If patrol reads should be run continuously,
|
|
then
|
|
.Ar interval
|
|
should consist of the word
|
|
.Dq continuously .
|
|
The optional
|
|
.Ar start
|
|
argument specifies a non-negative, relative start time for the next patrol read.
|
|
If an interval or start time is not specified,
|
|
then the existing setting will be used.
|
|
.It Cm manual
|
|
Enable manual patrol reads that are only initiated by the user.
|
|
.El
|
|
.It Cm start patrol
|
|
Start a patrol read operation.
|
|
.It Cm stop patrol
|
|
Stop a currently running patrol read operation.
|
|
.It Cm flash Ar file
|
|
Updates the flash on the controller with the firmware stored in
|
|
.Ar file .
|
|
A reboot is required for the new firmware to take effect.
|
|
.El
|
|
.Sh EXAMPLES
|
|
Configure the cache for volume mfid0 to cache only writes:
|
|
.Pp
|
|
.Dl Nm Cm cache mfid0 writes
|
|
.Dl Nm Cm cache mfid0 write-back
|
|
.Pp
|
|
Create a RAID5 array spanning the first four disks in the second enclosure:
|
|
.Pp
|
|
.Dl Nm Cm create raid5 e1:s0,e1:s1,e1:s2,e1:s4
|
|
.Pp
|
|
Configure the first three disks on a controller as JBOD:
|
|
.Pp
|
|
.Dl Nm Cm create jbod 0 1 2
|
|
.Pp
|
|
Create a RAID10 volume that spans two arrays each of which contains two disks
|
|
from two different enclosures:
|
|
.Pp
|
|
.Dl Nm Cm create raid10 e1:s0,e1:s1 e2:s0,e2:s1
|
|
.Pp
|
|
Add drive with the device ID of 4 as a global hot spare:
|
|
.Pp
|
|
.Dl Nm Cm add 4
|
|
.Pp
|
|
Add the drive in slot 2 in the main chassis as a hot spare for volume mfid0:
|
|
.Pp
|
|
.Dl Nm Cm add s2 mfid0
|
|
.Pp
|
|
Configure the adapter to run periodic patrol reads once a week with the first
|
|
patrol read starting in 5 minutes:
|
|
.Pp
|
|
.Dl Nm Cm patrol auto 604800 300
|
|
.Pp
|
|
.Sh SEE ALSO
|
|
.Xr mfi 4
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
utility first appeared in
|
|
.Fx 8.0 .
|