freebsd-dev/usr.sbin/pc-sysinstall/backend/functions-disk.sh
Josh Paetzel 089e2c44f4 Use gpart "-a" flag to 4k alignment.
Submitted by:	kris
Obtained from:	PC-BSD
2012-03-12 21:41:29 +00:00

853 lines
22 KiB
Bash
Executable File

#!/bin/sh
#-
# Copyright (c) 2010 iXsystems, Inc. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
# Functions related to disk operations using gpart
# See if device is a full disk or partition/slice
is_disk()
{
for _dsk in `sysctl -n kern.disks`
do
[ "$_dsk" = "${1}" ] && return 0
done
return 1
}
# Get a MBR partitions sysid
get_partition_sysid_mbr()
{
INPART="0"
DISK="$1"
PARTNUM=`echo ${2} | sed "s|${DISK}s||g"`
fdisk ${DISK} >${TMPDIR}/disk-${DISK} 2>/dev/null
while read i
do
echo "$i" | grep -q "The data for partition" 2>/dev/null
if [ $? -eq 0 ] ; then
INPART="0"
PART="`echo ${i} | cut -d ' ' -f 5`"
if [ "$PART" = "$PARTNUM" ] ; then
INPART="1"
fi
fi
# In the partition section
if [ "$INPART" = "1" ] ; then
echo "$i" | grep -q "^sysid" 2>/dev/null
if [ $? -eq 0 ] ; then
SYSID="`echo ${i} | tr -s '\t' ' ' | cut -d ' ' -f 2`"
break
fi
fi
done < ${TMPDIR}/disk-${DISK}
rm ${TMPDIR}/disk-${DISK}
export VAL="${SYSID}"
};
# Get the partitions MBR label
get_partition_label_mbr()
{
INPART="0"
DISK="$1"
PARTNUM=`echo ${2} | sed "s|${DISK}s||g"`
fdisk ${DISK} >${TMPDIR}/disk-${DISK} 2>/dev/null
while read i
do
echo "$i" | grep -q "The data for partition" 2>/dev/null
if [ $? -eq 0 ] ; then
INPART="0"
PART="`echo ${i} | cut -d ' ' -f 5`"
if [ "$PART" = "$PARTNUM" ] ; then
INPART="1"
fi
fi
# In the partition section
if [ "$INPART" = "1" ] ; then
echo "$i" | grep -q "^sysid" 2>/dev/null
if [ $? -eq 0 ] ; then
LABEL="`echo ${i} | tr -s '\t' ' ' | cut -d ',' -f 2-10`"
break
fi
fi
done < ${TMPDIR}/disk-${DISK}
rm ${TMPDIR}/disk-${DISK}
export VAL="${LABEL}"
};
# Get a GPT partitions label
get_partition_label_gpt()
{
DISK="${1}"
PARTNUM=`echo ${2} | sed "s|${DISK}p||g"`
gpart show ${DISK} >${TMPDIR}/disk-${DISK}
while read i
do
SLICE="`echo ${i} | grep -v ${DISK} | grep -v ' free ' |tr -s '\t' ' ' | cut -d ' ' -f 3`"
if [ "${SLICE}" = "${PARTNUM}" ] ; then
LABEL="`echo ${i} | grep -v ${DISK} | grep -v ' free ' |tr -s '\t' ' ' | cut -d ' ' -f 4`"
break
fi
done <${TMPDIR}/disk-${DISK}
rm ${TMPDIR}/disk-${DISK}
export VAL="${LABEL}"
};
# Get a partitions startblock
get_partition_startblock()
{
DISK="${1}"
PARTNUM=`echo ${2} | sed "s|${DISK}p||g" | sed "s|${DISK}s||g"`
gpart show ${DISK} >${TMPDIR}/disk-${DISK}
while read i
do
SLICE="`echo ${i} | grep -v ${DISK} | grep -v ' free ' |tr -s '\t' ' ' | cut -d ' ' -f 3`"
if [ "$SLICE" = "${PARTNUM}" ] ; then
SB="`echo ${i} | grep -v ${DISK} | grep -v ' free ' |tr -s '\t' ' ' | cut -d ' ' -f 1`"
break
fi
done <${TMPDIR}/disk-${DISK}
rm ${TMPDIR}/disk-${DISK}
export VAL="${SB}"
};
# Get a partitions blocksize
get_partition_blocksize()
{
DISK="${1}"
PARTNUM=`echo ${2} | sed "s|${DISK}p||g" | sed "s|${DISK}s||g"`
gpart show ${DISK} >${TMPDIR}/disk-${DISK}
while read i
do
SLICE="`echo ${i} | grep -v ${DISK} | grep -v ' free ' |tr -s '\t' ' ' | cut -d ' ' -f 3`"
if [ "$SLICE" = "${PARTNUM}" ] ; then
BS="`echo ${i} | grep -v ${DISK} | grep -v ' free ' |tr -s '\t' ' ' | cut -d ' ' -f 2`"
break
fi
done <${TMPDIR}/disk-${DISK}
rm ${TMPDIR}/disk-${DISK}
export VAL="${BS}"
};
# Function which returns the partitions on a target disk
get_disk_partitions()
{
gpart show ${1} >/dev/null 2>/dev/null
if [ $? -ne 0 ] ; then
export VAL=""
return
fi
type=`gpart show ${1} | awk '/^=>/ { printf("%s",$5); }'`
SLICES="`gpart show ${1} | grep -v ${1} | grep -v ' free ' |tr -s '\t' ' ' | cut -d ' ' -f 4 | sed '/^$/d'`"
for i in ${SLICES}
do
case $type in
MBR) name="${1}s${i}" ;;
GPT) name="${1}p${i}";;
*) name="${1}s${i}";;
esac
if [ -z "${RSLICES}" ]
then
RSLICES="${name}"
else
RSLICES="${RSLICES} ${name}"
fi
done
export VAL="${RSLICES}"
};
# Function which returns a target disks cylinders
get_disk_cyl()
{
cyl=`diskinfo -v ${1} | grep "# Cylinders" | tr -s ' ' | cut -f 2`
export VAL="${cyl}"
};
# Function which returns a target disks sectors
get_disk_sectors()
{
sec=`diskinfo -v ${1} | grep "# Sectors" | tr -s ' ' | cut -f 2`
export VAL="${sec}"
};
# Function which returns a target disks heads
get_disk_heads()
{
head=`diskinfo -v ${1} | grep "# Heads" | tr -s ' ' | cut -f 2`
export VAL="${head}"
};
# Function which returns a target disks mediasize in sectors
get_disk_mediasize()
{
mediasize=`diskinfo -v ${1} | grep "# mediasize in sectors" | tr -s ' ' | cut -f 2`
export VAL="${mediasize}"
};
# Function to delete all gparts before starting an install
delete_all_gpart()
{
echo_log "Deleting all gparts"
local DISK="$1"
# Check for any swaps to stop
for i in `swapctl -l | grep "$DISK" | awk '{print $1}'`
do
swapoff ${i} >/dev/null 2>/dev/null
done
# Delete the gparts now
for i in `gpart show ${DISK} 2>/dev/null | tr -s ' ' | cut -d ' ' -f 4`
do
if [ "/dev/${i}" != "${DISK}" -a "${i}" != "-" ] ; then
rc_nohalt "gpart delete -i ${i} ${DISK}"
fi
done
# Destroy the disk geom
rc_nohalt "gpart destroy ${DISK}"
# Make sure we clear any hidden gpt tables
clear_backup_gpt_table "${DISK}"
# Wipe out front of disk
rc_nohalt "dd if=/dev/zero of=${DISK} count=3000"
};
# Function to export all zpools before starting an install
stop_all_zfs()
{
local DISK="`echo ${1} | sed 's|/dev/||g'`"
# Export any zpools using this device so we can overwrite
for i in `zpool list -H -o name`
do
ztst=`zpool status ${i} | grep "ONLINE" | awk '{print $1}' | grep -q ${DISK}`
if [ "$ztst" = "$DISK" ] ; then
zpool export -f ${i}
fi
done
};
# Function which stops all gmirrors before doing any disk manipulation
stop_all_gmirror()
{
local DISK="`echo ${1} | sed 's|/dev/||g'`"
GPROV="`gmirror list | grep ". Name: mirror/" | cut -d '/' -f 2`"
for gprov in $GPROV
do
gmirror list | grep -q "Name: ${DISK}" 2>/dev/null
if [ $? -eq 0 ]
then
echo_log "Stopping mirror $gprov $DISK"
rc_nohalt "gmirror remove $gprov $DISK"
rc_nohalt "dd if=/dev/zero of=/dev/${DISK} count=4096"
fi
done
};
# Make sure we don't have any geli providers active on this disk
stop_all_geli()
{
local _geld="`echo ${1} | sed 's|/dev/||g'`"
cd /dev
for i in `ls ${_geld}*`
do
echo $i | grep -q '.eli' 2>/dev/null
if [ $? -eq 0 ]
then
echo_log "Detaching GELI on ${i}"
rc_halt "geli detach ${i}"
fi
done
};
# Function which reads in the disk slice config, and performs it
setup_disk_slice()
{
# Cleanup any slice / mirror dirs
rm -rf ${SLICECFGDIR} >/dev/null 2>/dev/null
mkdir ${SLICECFGDIR}
rm -rf ${MIRRORCFGDIR} >/dev/null 2>/dev/null
mkdir ${MIRRORCFGDIR}
# Start with disk0 and gm0
disknum="0"
gmnum="0"
# We are ready to start setting up the disks, lets read the config and do the actions
while read line
do
echo $line | grep -q "^disk${disknum}=" 2>/dev/null
if [ $? -eq 0 ]
then
# Found a disk= entry, lets get the disk we are working on
get_value_from_string "${line}"
strip_white_space "$VAL"
DISK="$VAL"
echo "${DISK}" | grep -q '^/dev/'
if [ $? -ne 0 ] ; then DISK="/dev/$DISK" ; fi
# Before we go further, lets confirm this disk really exists
if [ ! -e "${DISK}" ] ; then
exit_err "ERROR: The disk ${DISK} does not exist!"
fi
# Make sure we stop any gmirrors on this disk
stop_all_gmirror ${DISK}
# Make sure we stop any geli stuff on this disk
stop_all_geli ${DISK}
# Make sure we don't have any zpools loaded
stop_all_zfs ${DISK}
fi
# Lets look if this device will be mirrored on another disk
echo $line | grep -q "^mirror=" 2>/dev/null
if [ $? -eq 0 ]
then
# Found a disk= entry, lets get the disk we are working on
get_value_from_string "${line}"
strip_white_space "$VAL"
MIRRORDISK="$VAL"
echo "${MIRRORDISK}" | grep -q '^/dev/'
if [ $? -ne 0 ] ; then MIRRORDISK="/dev/$MIRRORDISK" ; fi
# Before we go further, lets confirm this disk really exists
if [ ! -e "${MIRRORDISK}" ]
then
exit_err "ERROR: The mirror disk ${MIRRORDISK} does not exist!"
fi
# Make sure we stop any gmirrors on this mirror disk
stop_all_gmirror ${MIRRORDISK}
# Make sure we stop any geli stuff on this mirror disk
stop_all_geli ${MIRRORDISK}
# Make sure we don't have any zpools mirror loaded
stop_all_zfs ${MIRRORDISK}
fi
# Lets see if we have been given a mirror balance choice
echo $line | grep -q "^mirrorbal=" 2>/dev/null
if [ $? -eq 0 ]
then
# Found a disk= entry, lets get the disk we are working on
get_value_from_string "${line}"
strip_white_space "$VAL"
MIRRORBAL="$VAL"
fi
echo $line | grep -q "^partition=" 2>/dev/null
if [ $? -eq 0 ]
then
# Found a partition= entry, lets read / set it
get_value_from_string "${line}"
strip_white_space "$VAL"
PTYPE=`echo $VAL|tr A-Z a-z`
# We are using free space, figure out the slice number
if [ "${PTYPE}" = "free" ]
then
# Lets figure out what number this slice will be
LASTSLICE="`gpart show ${DISK} \
| grep -v ${DISK} \
| grep -v ' free' \
| tr -s '\t' ' ' \
| cut -d ' ' -f 4 \
| sed '/^$/d' \
| tail -n 1`"
if [ -z "${LASTSLICE}" ]
then
LASTSLICE="1"
else
LASTSLICE=$((LASTSLICE+1))
fi
if [ $LASTSLICE -gt 4 ]
then
exit_err "ERROR: BSD only supports primary partitions, and there are none available on $DISK"
fi
fi
fi
# Check if we have an image file defined
echo $line | grep -q "^image=" 2>/dev/null
if [ $? -eq 0 ] ; then
# Found an image= entry, lets read / set it
get_value_from_string "${line}"
strip_white_space "$VAL"
IMAGE="$VAL"
if [ ! -f "$IMAGE" ] ; then
exit_err "$IMAGE file does not exist"
fi
fi
# Check if we have a partscheme specified
echo $line | grep -q "^partscheme=" 2>/dev/null
if [ $? -eq 0 ] ; then
# Found a partscheme= entry, lets read / set it
get_value_from_string "${line}"
strip_white_space "$VAL"
PSCHEME="$VAL"
if [ "$PSCHEME" != "GPT" -a "$PSCHEME" != "MBR" ] ; then
exit_err "Unknown partition scheme: $PSCHEME"
fi
fi
echo $line | grep -q "^bootManager=" 2>/dev/null
if [ $? -eq 0 ]
then
# Found a bootManager= entry, lets read /set it
get_value_from_string "${line}"
strip_white_space "$VAL"
BMANAGER="$VAL"
fi
echo $line | grep -q "^commitDiskPart" 2>/dev/null
if [ $? -eq 0 ]
then
# Found our flag to commit this disk setup / lets do sanity check and do it
if [ ! -z "${DISK}" -a ! -z "${PTYPE}" ]
then
case ${PTYPE} in
all)
# If we have a gmirror, lets set it up
if [ -n "$MIRRORDISK" ]; then
# Default to round-robin if the user didn't specify
if [ -z "$MIRRORBAL" ]; then MIRRORBAL="round-robin" ; fi
_mFile=`echo $DISK | sed 's|/|%|g'`
echo "$MIRRORDISK:$MIRRORBAL:gm${gmnum}" >${MIRRORCFGDIR}/$_mFile
init_gmirror "$gmnum" "$MIRRORBAL" "$DISK" "$MIRRORDISK"
# Reset DISK to the gmirror device
DISK="/dev/mirror/gm${gmnum}"
gmnum=$((gmknum+1))
fi
if [ "$PSCHEME" = "MBR" -o -z "$PSCHEME" ] ; then
PSCHEME="MBR"
tmpSLICE="${DISK}s1"
else
tmpSLICE="${DISK}p1"
fi
run_gpart_full "${DISK}" "${BMANAGER}" "${PSCHEME}"
;;
s1|s2|s3|s4)
tmpSLICE="${DISK}${PTYPE}"
# Get the number of the slice we are working on
s="`echo ${PTYPE} | awk '{print substr($0,length,1)}'`"
run_gpart_slice "${DISK}" "${BMANAGER}" "${s}"
;;
p1|p2|p3|p4|p5|p6|p7|p8|p9|p10|p11|p12|p13|p14|p15|p16|p17|p18|p19|p20)
tmpSLICE="${DISK}${PTYPE}"
# Get the number of the gpt partition we are working on
s="`echo ${PTYPE} | awk '{print substr($0,length,1)}'`"
run_gpart_gpt_part "${DISK}" "${BMANAGER}" "${s}"
;;
free)
tmpSLICE="${DISK}s${LASTSLICE}"
run_gpart_free "${DISK}" "${LASTSLICE}" "${BMANAGER}"
;;
image)
if [ -z "${IMAGE}" ]
then
exit_err "ERROR: partition type image specified with no image!"
fi
;;
*) exit_err "ERROR: Unknown PTYPE: $PTYPE" ;;
esac
if [ -n "${IMAGE}" ]
then
local DEST
if [ -n "${tmpSLICE}" ]
then
DEST="${tmpSLICE}"
else
DEST="${DISK}"
fi
write_image "${IMAGE}" "${DEST}"
check_disk_layout "${DEST}"
fi
# Now save which disk<num> this is, so we can parse it later during slice partition setup
if [ -z "${IMAGE}" ]
then
_sFile=`echo $tmpSLICE | sed 's|/|-|g'`
echo "disk${disknum}" >${SLICECFGDIR}/$_sFile
fi
# Increment our disk counter to look for next disk and unset
unset BMANAGER PTYPE DISK MIRRORDISK MIRRORBAL PSCHEME IMAGE
disknum=$((disknum+1))
else
exit_err "ERROR: commitDiskPart was called without procceding disk<num>= and partition= entries!!!"
fi
fi
done <${CFGF}
};
# Init the gmirror device
init_gmirror()
{
local _mNum=$1
local _mBal=$2
local _mDisk=$3
# Create this mirror device
rc_halt "gmirror label -vb ${_mBal} gm${_mNum} ${_mDisk}"
sleep 3
}
# Stop all gjournals on disk / slice
stop_gjournal()
{
_gdsk="`echo $1 | sed 's|/dev/||g'`"
# Check if we need to shutdown any journals on this drive
ls /dev/${_gdsk}*.journal >/dev/null 2>/dev/null
if [ $? -eq 0 ]
then
cd /dev
for i in `ls ${_gdsk}*.journal`
do
rawjournal="`echo ${i} | cut -d '.' -f 1`"
gjournal stop -f ${rawjournal} >>${LOGOUT} 2>>${LOGOUT}
gjournal clear ${rawjournal} >>${LOGOUT} 2>>${LOGOUT}
done
fi
} ;
# Function to wipe the potential backup gpt table from a disk
clear_backup_gpt_table()
{
echo_log "Clearing gpt backup table location on disk"
rc_nohalt "dd if=/dev/zero of=${1} bs=1m count=1"
rc_nohalt "dd if=/dev/zero of=${1} bs=1m oseek=`diskinfo ${1} | awk '{print int($3 / (1024*1024)) - 4;}'`"
} ;
# Function which runs gpart and creates a single large GPT partition scheme
init_gpt_full_disk()
{
_intDISK=$1
# Set our sysctl so we can overwrite any geom using drives
sysctl kern.geom.debugflags=16 >>${LOGOUT} 2>>${LOGOUT}
# Stop any journaling
stop_gjournal "${_intDISK}"
# Remove any existing partitions
delete_all_gpart "${_intDISK}"
sleep 2
echo_log "Running gpart on ${_intDISK}"
rc_halt "gpart create -s GPT ${_intDISK}"
rc_halt "gpart add -b 34 -s 128 -t freebsd-boot ${_intDISK}"
echo_log "Stamping boot sector on ${_intDISK}"
rc_halt "gpart bootcode -b /boot/pmbr ${_intDISK}"
}
# Function which runs gpart and creates a single large MBR partition scheme
init_mbr_full_disk()
{
_intDISK=$1
_intBOOT=$2
startblock="2016"
# Set our sysctl so we can overwrite any geom using drives
sysctl kern.geom.debugflags=16 >>${LOGOUT} 2>>${LOGOUT}
# Stop any journaling
stop_gjournal "${_intDISK}"
# Remove any existing partitions
delete_all_gpart "${_intDISK}"
sleep 2
echo_log "Running gpart on ${_intDISK}"
rc_halt "gpart create -s mbr -f active ${_intDISK}"
# Install new partition setup
echo_log "Running gpart add on ${_intDISK}"
rc_halt "gpart add -a 4k -t freebsd -i 1 ${_intDISK}"
sleep 2
echo_log "Cleaning up ${_intDISK}s1"
rc_halt "dd if=/dev/zero of=${_intDISK}s1 count=1024"
if [ "$_intBOOT" = "bsd" ] ; then
echo_log "Stamping boot0 on ${_intDISK}"
rc_halt "gpart bootcode -b /boot/boot0 ${_intDISK}"
else
echo_log "Stamping boot1 on ${_intDISK}"
rc_halt "gpart bootcode -b /boot/boot1 ${_intDISK}"
fi
}
# Function which runs gpart and creates a single large slice
run_gpart_full()
{
DISK=$1
BOOT=$2
SCHEME=$3
if [ "$SCHEME" = "MBR" ] ; then
init_mbr_full_disk "$DISK" "$BOOT"
slice=`echo "${DISK}:1:mbr" | sed 's|/|-|g'`
else
init_gpt_full_disk "$DISK"
slice=`echo "${DISK}:1:gpt" | sed 's|/|-|g'`
fi
# Lets save our slice, so we know what to look for in the config file later on
if [ -z "$WORKINGSLICES" ]
then
WORKINGSLICES="${slice}"
export WORKINGSLICES
else
WORKINGSLICES="${WORKINGSLICES} ${slice}"
export WORKINGSLICES
fi
};
# Function which runs gpart on a specified gpt partition
run_gpart_gpt_part()
{
DISK=$1
# Set the slice we will use later
slice="${1}p${3}"
# Set our sysctl so we can overwrite any geom using drives
sysctl kern.geom.debugflags=16 >>${LOGOUT} 2>>${LOGOUT}
# Get the number of the slice we are working on
slicenum="$3"
# Stop any journaling
stop_gjournal "${slice}"
# Make sure we have disabled swap on this drive
if [ -e "${slice}b" ]
then
swapoff ${slice}b >/dev/null 2>/dev/null
swapoff ${slice}b.eli >/dev/null 2>/dev/null
fi
# Modify partition type
echo_log "Running gpart modify on ${DISK}"
rc_halt "gpart modify -t freebsd -i ${slicenum} ${DISK}"
sleep 2
# Clean up old partition
echo_log "Cleaning up $slice"
rc_halt "dd if=/dev/zero of=${DISK}p${slicenum} count=1024"
sleep 4
# Init the MBR partition
rc_halt "gpart create -s BSD ${DISK}p${slicenum}"
# Set the slice to the format we'll be using for gpart later
slice=`echo "${1}:${3}:gptslice" | sed 's|/|-|g'`
# Lets save our slice, so we know what to look for in the config file later on
if [ -z "$WORKINGSLICES" ]
then
WORKINGSLICES="${slice}"
export WORKINGSLICES
else
WORKINGSLICES="${WORKINGSLICES} ${slice}"
export WORKINGSLICES
fi
};
# Function which runs gpart on a specified s1-4 slice
run_gpart_slice()
{
DISK=$1
if [ -n "$2" ]
then
BMANAGER="$2"
fi
# Set the slice we will use later
slice="${1}s${3}"
# Set our sysctl so we can overwrite any geom using drives
sysctl kern.geom.debugflags=16 >>${LOGOUT} 2>>${LOGOUT}
# Get the number of the slice we are working on
slicenum="$3"
# Stop any journaling
stop_gjournal "${slice}"
# Make sure we have disabled swap on this drive
if [ -e "${slice}b" ]
then
swapoff ${slice}b >/dev/null 2>/dev/null
swapoff ${slice}b.eli >/dev/null 2>/dev/null
fi
# Modify partition type
echo_log "Running gpart modify on ${DISK}"
rc_halt "gpart modify -t freebsd -i ${slicenum} ${DISK}"
sleep 2
# Clean up old partition
echo_log "Cleaning up $slice"
rc_halt "dd if=/dev/zero of=${DISK}s${slicenum} count=1024"
sleep 1
if [ "${BMANAGER}" = "bsd" ]
then
echo_log "Stamping boot sector on ${DISK}"
rc_halt "gpart bootcode -b /boot/boot0 ${DISK}"
fi
# Set the slice to the format we'll be using for gpart later
slice=`echo "${1}:${3}:mbr" | sed 's|/|-|g'`
# Lets save our slice, so we know what to look for in the config file later on
if [ -z "$WORKINGSLICES" ]
then
WORKINGSLICES="${slice}"
export WORKINGSLICES
else
WORKINGSLICES="${WORKINGSLICES} ${slice}"
export WORKINGSLICES
fi
};
# Function which runs gpart and creates a new slice from free disk space
run_gpart_free()
{
DISK=$1
SLICENUM=$2
if [ -n "$3" ]
then
BMANAGER="$3"
fi
# Set our sysctl so we can overwrite any geom using drives
sysctl kern.geom.debugflags=16 >>${LOGOUT} 2>>${LOGOUT}
slice="${DISK}s${SLICENUM}"
slicenum="${SLICENUM}"
# Working on the first slice, make sure we have MBR setup
gpart show ${DISK} >/dev/null 2>/dev/null
if [ $? -ne 0 -a "$SLICENUM" = "1" ] ; then
echo_log "Initializing disk, no existing MBR setup"
rc_halt "gpart create -s mbr ${DISK}"
fi
# Install new partition setup
echo_log "Running gpart on ${DISK}"
rc_halt "gpart add -a 4k -t freebsd -i ${slicenum} ${DISK}"
sleep 2
echo_log "Cleaning up $slice"
rc_halt "dd if=/dev/zero of=${slice} count=1024"
sleep 1
if [ "${BMANAGER}" = "bsd" ]
then
echo_log "Stamping boot sector on ${DISK}"
rc_halt "gpart bootcode -b /boot/boot0 ${DISK}"
fi
slice=`echo "${DISK}:${SLICENUM}:mbr" | sed 's|/|-|g'`
# Lets save our slice, so we know what to look for in the config file later on
if [ -z "$WORKINGSLICES" ]
then
WORKINGSLICES="${slice}"
export WORKINGSLICES
else
WORKINGSLICES="${WORKINGSLICES} ${slice}"
export WORKINGSLICES
fi
};