freebsd-dev/tools/boot/install-boot.sh
Matt Macy 14113f123e Use makefs -t msdos in make_esp_file
With this last piece in place, make -C /usr/src/release release.iso is
finally able to run in a jail. This was not possible before because
msdosfs cannot be mounted inside a jail.

Submitted by:	ryan@ixsystems.com
Reviewed by:	emaste@, imp@, gjb@
MFC after:	1 week
Sponsored by:	iXsystems, Inc.
Differential Revision:	https://reviews.freebsd.org/D21385
2019-09-03 18:37:55 +00:00

443 lines
11 KiB
Bash
Executable File

#!/bin/sh
# $FreeBSD$
#
# Installs/updates the necessary boot blocks for the desired boot environment
#
# Lightly tested.. Intended to be installed, but until it matures, it will just
# be a boot tool for regression testing.
# insert code here to guess what you have -- yikes!
# Minimum size of FAT filesystems, in KB.
fat32min=33292
fat16min=2100
die() {
echo $*
exit 1
}
doit() {
echo $*
eval $*
}
find-part() {
dev=$1
part=$2
gpart show $dev | tail +2 | awk '$4 == "'$part'" { print $3; }'
}
get_uefi_bootname() {
case ${TARGET:-$(uname -m)} in
amd64) echo bootx64 ;;
arm64) echo bootaa64 ;;
i386) echo bootia32 ;;
arm) echo bootarm ;;
*) die "machine type $(uname -m) doesn't support UEFI" ;;
esac
}
make_esp_file() {
local file sizekb loader device stagedir fatbits efibootname
file=$1
sizekb=$2
loader=$3
if [ "$sizekb" -ge "$fat32min" ]; then
fatbits=32
elif [ "$sizekb" -ge "$fat16min" ]; then
fatbits=16
else
fatbits=12
fi
stagedir=$(mktemp -d /tmp/stand-test.XXXXXX)
mkdir -p "${stagedir}/EFI/BOOT"
efibootname=$(get_uefi_bootname)
cp "${loader}" "${stagedir}/EFI/BOOT/${efibootname}.efi"
makefs -t msdos \
-o fat_type=${fatbits} \
-o sectors_per_cluster=1 \
-o volume_label=EFISYS \
-s ${sizekb}k \
"${file}" "${stagedir}"
rm -rf "${stagedir}"
}
make_esp_device() {
local dev file mntpt fstype efibootname kbfree loadersize efibootfile
local isboot1 existingbootentryloaderfile bootorder bootentry
# ESP device node
dev=$1
file=$2
mntpt=$(mktemp -d /tmp/stand-test.XXXXXX)
# See if we're using an existing (formatted) ESP
fstype=$(fstyp "${dev}")
if [ "${fstype}" != "msdosfs" ]; then
newfs_msdos -F 32 -c 1 -L EFISYS "${dev}" > /dev/null 2>&1
fi
mount -t msdosfs "${dev}" "${mntpt}"
if [ $? -ne 0 ]; then
die "Failed to mount ${dev} as an msdosfs filesystem"
fi
echo "Mounted ESP ${dev} on ${mntpt}"
efibootname=$(get_uefi_bootname)
kbfree=$(df -k "${mntpt}" | tail -1 | cut -w -f 4)
loadersize=$(stat -f %z "${file}")
loadersize=$((loadersize / 1024))
# Check if /EFI/BOOT/BOOTxx.EFI is the FreeBSD boot1.efi
# If it is, remove it to avoid leaving stale files around
efibootfile="${mntpt}/EFI/BOOT/${efibootname}.efi"
if [ -f "${efibootfile}" ]; then
isboot1=$(strings "${efibootfile}" | grep "FreeBSD EFI boot block")
if [ -n "${isboot1}" ] && [ "$kbfree" -lt "${loadersize}" ]; then
echo "Only ${kbfree}KB space remaining: removing old FreeBSD boot1.efi file /EFI/BOOT/${efibootname}.efi"
rm "${efibootfile}"
rmdir "${mntpt}/EFI/BOOT"
else
echo "${kbfree}KB space remaining on ESP: renaming old boot1.efi file /EFI/BOOT/${efibootname}.efi /EFI/BOOT/${efibootname}-old.efi"
mv "${efibootfile}" "${mntpt}/EFI/BOOT/${efibootname}-old.efi"
fi
fi
if [ ! -f "${mntpt}/EFI/freebsd/loader.efi" ] && [ "$kbfree" -lt "$loadersize" ]; then
umount "${mntpt}"
rmdir "${mntpt}"
echo "Failed to update the EFI System Partition ${dev}"
echo "Insufficient space remaining for ${file}"
echo "Run e.g \"mount -t msdosfs ${dev} /mnt\" to inspect it for files that can be removed."
die
fi
mkdir -p "${mntpt}/EFI/freebsd"
# Keep a copy of the existing loader.efi in case there's a problem with the new one
if [ -f "${mntpt}/EFI/freebsd/loader.efi" ] && [ "$kbfree" -gt "$((loadersize * 2))" ]; then
cp "${mntpt}/EFI/freebsd/loader.efi" "${mntpt}/EFI/freebsd/loader-old.efi"
fi
echo "Copying loader to /EFI/freebsd on ESP"
cp "${file}" "${mntpt}/EFI/freebsd/loader.efi"
if [ -n "${updatesystem}" ]; then
existingbootentryloaderfile=$(efibootmgr -v | grep "${mntpt}//EFI/freebsd/loader.efi")
if [ -z "$existingbootentryloaderfile" ]; then
# Try again without the double forward-slash in the path
existingbootentryloaderfile=$(efibootmgr -v | grep "${mntpt}/EFI/freebsd/loader.efi")
fi
if [ -z "$existingbootentryloaderfile" ]; then
echo "Creating UEFI boot entry for FreeBSD"
efibootmgr --create --label FreeBSD --loader "${mntpt}/EFI/freebsd/loader.efi" > /dev/null
if [ $? -ne 0 ]; then
die "Failed to create new boot entry"
fi
# When creating new entries, efibootmgr doesn't mark them active, so we need to
# do so. It doesn't make it easy to find which entry it just added, so rely on
# the fact that it places the new entry first in BootOrder.
bootorder=$(efivar --name 8be4df61-93ca-11d2-aa0d-00e098032b8c-BootOrder --print --no-name --hex | head -1)
bootentry=$(echo "${bootorder}" | cut -w -f 3)$(echo "${bootorder}" | cut -w -f 2)
echo "Marking UEFI boot entry ${bootentry} active"
efibootmgr --activate "${bootentry}" > /dev/null
else
echo "Existing UEFI FreeBSD boot entry found: not creating a new one"
fi
else
# Configure for booting from removable media
if [ ! -d "${mntpt}/EFI/BOOT" ]; then
mkdir -p "${mntpt}/EFI/BOOT"
fi
cp "${file}" "${mntpt}/EFI/BOOT/${efibootname}.efi"
fi
umount "${mntpt}"
rmdir "${mntpt}"
echo "Finished updating ESP"
}
make_esp() {
local file loaderfile
file=$1
loaderfile=$2
if [ -f "$file" ]; then
make_esp_file ${file} ${fat32min} ${loaderfile}
else
make_esp_device ${file} ${loaderfile}
fi
}
make_esp_mbr() {
dev=$1
dst=$2
s=$(find-part $dev "!239")
if [ -z "$s" ] ; then
s=$(find-part $dev "efi")
if [ -z "$s" ] ; then
die "No ESP slice found"
fi
fi
make_esp /dev/${dev}s${s} ${dst}/boot/loader.efi
}
make_esp_gpt() {
dev=$1
dst=$2
idx=$(find-part $dev "efi")
if [ -z "$idx" ] ; then
die "No ESP partition found"
fi
make_esp /dev/${dev}p${idx} ${dst}/boot/loader.efi
}
boot_nogeli_gpt_ufs_legacy() {
dev=$1
dst=$2
idx=$(find-part $dev "freebsd-boot")
if [ -z "$idx" ] ; then
die "No freebsd-boot partition found"
fi
doit gpart bootcode -b ${gpt0} -p ${gpt2} -i $idx $dev
}
boot_nogeli_gpt_ufs_uefi() {
make_esp_gpt $1 $2
}
boot_nogeli_gpt_ufs_both() {
boot_nogeli_gpt_ufs_legacy $1 $2 $3
boot_nogeli_gpt_ufs_uefi $1 $2 $3
}
boot_nogeli_gpt_zfs_legacy() {
dev=$1
dst=$2
idx=$(find-part $dev "freebsd-boot")
if [ -z "$idx" ] ; then
die "No freebsd-boot partition found"
fi
doit gpart bootcode -b ${gpt0} -p ${gptzfs2} -i $idx $dev
}
boot_nogeli_gpt_zfs_uefi() {
make_esp_gpt $1 $2
}
boot_nogeli_gpt_zfs_both() {
boot_nogeli_gpt_zfs_legacy $1 $2 $3
boot_nogeli_gpt_zfs_uefi $1 $2 $3
}
boot_nogeli_mbr_ufs_legacy() {
dev=$1
dst=$2
doit gpart bootcode -b ${mbr0} ${dev}
s=$(find-part $dev "freebsd")
if [ -z "$s" ] ; then
die "No freebsd slice found"
fi
doit gpart bootcode -p ${mbr2} ${dev}s${s}
}
boot_nogeli_mbr_ufs_uefi() {
make_esp_mbr $1 $2
}
boot_nogeli_mbr_ufs_both() {
boot_nogeli_mbr_ufs_legacy $1 $2 $3
boot_nogeli_mbr_ufs_uefi $1 $2 $3
}
boot_nogeli_mbr_zfs_legacy() {
dev=$1
dst=$2
# search to find the BSD slice
s=$(find-part $dev "freebsd")
if [ -z "$s" ] ; then
die "No BSD slice found"
fi
idx=$(find-part ${dev}s${s} "freebsd-zfs")
if [ -z "$idx" ] ; then
die "No freebsd-zfs slice found"
fi
# search to find the freebsd-zfs partition within the slice
# Or just assume it is 'a' because it has to be since it fails otherwise
doit gpart bootcode -b ${dst}/boot/mbr ${dev}
dd if=${dst}/boot/zfsboot of=/tmp/zfsboot1 count=1
doit gpart bootcode -b /tmp/zfsboot1 ${dev}s${s} # Put boot1 into the start of part
sysctl kern.geom.debugflags=0x10 # Put boot2 into ZFS boot slot
doit dd if=${dst}/boot/zfsboot of=/dev/${dev}s${s}a skip=1 seek=1024
sysctl kern.geom.debugflags=0x0
}
boot_nogeli_mbr_zfs_uefi() {
make_esp_mbr $1 $2
}
boot_nogeli_mbr_zfs_both() {
boot_nogeli_mbr_zfs_legacy $1 $2 $3
boot_nogeli_mbr_zfs_uefi $1 $2 $3
}
boot_geli_gpt_ufs_legacy() {
boot_nogeli_gpt_ufs_legacy $1 $2 $3
}
boot_geli_gpt_ufs_uefi() {
boot_nogeli_gpt_ufs_uefi $1 $2 $3
}
boot_geli_gpt_ufs_both() {
boot_nogeli_gpt_ufs_both $1 $2 $3
}
boot_geli_gpt_zfs_legacy() {
boot_nogeli_gpt_zfs_legacy $1 $2 $3
}
boot_geli_gpt_zfs_uefi() {
boot_nogeli_gpt_zfs_uefi $1 $2 $3
}
boot_geli_gpt_zfs_both() {
boot_nogeli_gpt_zfs_both $1 $2 $3
}
# GELI+MBR is not a valid configuration
boot_geli_mbr_ufs_legacy() {
exit 1
}
boot_geli_mbr_ufs_uefi() {
exit 1
}
boot_geli_mbr_ufs_both() {
exit 1
}
boot_geli_mbr_zfs_legacy() {
exit 1
}
boot_geli_mbr_zfs_uefi() {
exit 1
}
boot_geli_mbr_zfs_both() {
exit 1
}
boot_nogeli_vtoc8_ufs_ofw() {
dev=$1
dst=$2
# For non-native builds, ensure that geom_part(4) supports VTOC8.
kldload geom_part_vtoc8.ko
doit gpart bootcode -p ${vtoc8} ${dev}
}
usage() {
printf 'Usage: %s -b bios [-d destdir] -f fs [-g geli] [-h] [-o optargs] -s scheme <bootdev>\n' "$0"
printf 'Options:\n'
printf ' bootdev device to install the boot code on\n'
printf ' -b bios bios type: legacy, uefi or both\n'
printf ' -d destdir destination filesystem root\n'
printf ' -f fs filesystem type: ufs or zfs\n'
printf ' -g geli yes or no\n'
printf ' -h this help/usage text\n'
printf ' -u Run commands such as efibootmgr to update the\n'
printf ' currently running system\n'
printf ' -o optargs optional arguments\n'
printf ' -s scheme mbr or gpt\n'
exit 0
}
srcroot=/
# Note: we really don't support geli boot in this script yet.
geli=nogeli
while getopts "b:d:f:g:ho:s:u" opt; do
case "$opt" in
b)
bios=${OPTARG}
;;
d)
srcroot=${OPTARG}
;;
f)
fs=${OPTARG}
;;
g)
case ${OPTARG} in
[Yy][Ee][Ss]|geli) geli=geli ;;
*) geli=nogeli ;;
esac
;;
u)
updatesystem=1
;;
o)
opts=${OPTARG}
;;
s)
scheme=${OPTARG}
;;
?|h)
usage
;;
esac
done
if [ -n "${scheme}" ] && [ -n "${fs}" ] && [ -n "${bios}" ]; then
shift $((OPTIND-1))
dev=$1
fi
# For gpt, we need to install pmbr as the primary boot loader
# it knows about
gpt0=${srcroot}/boot/pmbr
gpt2=${srcroot}/boot/gptboot
gptzfs2=${srcroot}/boot/gptzfsboot
# For MBR, we have lots of choices, but select mbr, boot0 has issues with UEFI
mbr0=${srcroot}/boot/mbr
mbr2=${srcroot}/boot/boot
# VTOC8
vtoc8=${srcroot}/boot/boot1
# sanity check here
# Check if we've been given arguments. If not, this script is probably being
# sourced, so we shouldn't run anything.
if [ -n "${dev}" ]; then
eval boot_${geli}_${scheme}_${fs}_${bios} $dev $srcroot $opts || echo "Unsupported boot env: ${geli}-${scheme}-${fs}-${bios}"
fi